Structural and magnetic properties of double perovskite oxide Ba2CeSbO6

The structural and magnetic properties of a double perovskite oxide Ba₂CeSbO₆ (BCSO) synthesized by solid state reaction technique have been investigated. The Rietveld refinement of the X-ray diffraction pattern of BCSO suggests the monoclinic crystal structure at room temperature with P2₁/n space group. The vibrational properties of BCSO are investigated by the Fourier transform Infrared and Raman spectroscopy. The Raman spectrum confirms the B-site ordering of cations in BCSO. The temperature dependent magnetic susceptibility data in the field cooled mode show the anti-ferromagnetic behaviour of BCSO below 59 K. The core level X-ray photoemission (XPS) spectrum of Ce-3d and Sb-3d states confirms the presence of multiple oxidation states of these cations. The presence of both the Ce³⁺ and Ce⁴⁺ ions in BCSO gives the 4f^4−δ intermediate valence state which may reduce the effective magnetic moment with respect to the system having single valence Ce³⁺ ion.     

Synthesis of magnesium oxide with high adsorptive properties

The synthesis of magnesium oxide with high adsorptive properties by the sulfate-ammonia and sulfate-carbonate methods and the effect exerted by the conditions of synthesis of magnesium oxide and hydroxide on their adsorptive activity were studied. The thermograms of the synthesized samples are presented. The activity of the samples, evaluated by the iodine number, was determined in relation to the synthesis conditions.Translated from Zhurnal Prikladnoi Khimii, Vol. 77, No. 9, 2004, pp. 1442–1445.Original Russian Text Copyright © 2004 by Treushchenko, Dmitrevskii, Mishina, Popov, Galkin, V. Treushchenko.     

二氧化硅修饰纳米氧化锆陶瓷材料的制备及性能

以二甲基二乙氧基硅烷为硅源,在水溶液中成功制备了SiO2修饰纳米ZrO2颗粒;利用透射电子显微镜、热重分析仪、X射线衍射仪、红外光谱仪分析了样品的形貌和结构;将SiO2/ZrO2与α-Al2O3制成陶瓷材料,考察了其机械性能.结果表明,所制备的SiO2/ZrO2晶粒均一,直径约为10nm,硅原子在SiO2/ZrO2中以Si―O―Zr键合形式存在,SiO2不影响ZrO2的晶型.引入SiO2使得ZrO2晶粒细化、尺寸均匀性提高;SiO2/ZrO2/Al2O3陶瓷气孔率小,具有致密的显微结构和优异的机械性能.     

Structural and adsorptive properties of activated carbons prepared by carbonization and activation of resins

Four activated carbons (S1-S4) possessing different structural characteristics were prepared by carbonization of commercial resins (used for ion exchange) and subsequent activation. Their textural parameters were determined on the basis of nitrogen adsorption-desorption at 77.4 K, analyzed by applying several local and overall adsorption isotherm equations. The nature of carbon surface functionalities was analyzed by FTIR spectroscopy. The GC and solid-phase extraction (SPE) techniques were applied to study the influence of the texture of carbonaceous materials on their adsorptive properties. The adsorption efficiency of synthesized carbons with respect to alkylhalides used as probe compounds in the GC measurements varied over a range from 28% (C(2)H(3)Cl(3)/S2) to 85% (CHBr(3)/S1) depending on the type of adsorbates and adsorbents. The concentrating efficiency of these carbons in SPE of explosive materials changed over a larger range from 12% (trinitroglycerin/S4) and 13% (trinitrotoluene/S2) up to 100% (octogen/S1). Active carbon prepared using Zerolite 225x8 as a precursor demonstrated better results than other carbons in two types of adsorption with average values of the efficiency of 75.4% for explosives and 60.8% for alkylhalides.     

改性氧化石墨烯膜的制备及其性能研究

为了改善氧化石墨烯(GO)膜的低渗透性和不稳定性,本文采用过氧化氢对GO进行改性后抽滤成膜,并在不同温度下对膜进行热还原.采用超高性能全自动气体吸附仪、透射电镜、扫描电镜、拉曼光谱仪、接触角、X射线衍射等对材料进行结构和形貌表征.分析不同HGO(H2O2改性GO)负载量和不同温度热还原对膜水通量和截留率的影响.在优化条...     

Structural and rheological properties of hydrophobically modified polysaccharide associative networks

The phase behavior of hydrophobically modified chitosans (HMCs) in aqueous solution has been investigated using scattering and rheology experiments. We observed four regions on the phase diagram of the associative polymer: (i) a supernatant phase (unimers phase) at low polymer concentration; (ii) a dilute solution of intermolecularly bridged flowerlike micelles at intermediate concentration; (iii) an associative gel phase at high polymer content; and (iv) a phase separation. In the present paper, we discuss the structural and dynamical properties of the HMC associative networks (c > c*) at a fixed hydrophobic degree of substitution of 2% and fixed alkyl side chains (stickers) length C8 (domains iii and iv of the phase diagram). As the polymer concentration is increasing, a connecting network is formed from the percolation of bridges between micellar aggregates. In this regime, small-angle neutron scattering and light scattering measurements show that -50-nm flower aggregates are acting like junction points in the network. The effect of the concentration, the stress, and the shear on the structure of the network is discussed. In particular, we observe bridge-to-loop transitions and then the formation of microgels or a low-connected network under shear. Therefore, our results are compared to recent theoretical models and to the results reported for telechelic systems.     

Chromatographic and adsorptive properties of mercury sulfide

Summary The behaviour of mercury sulfide (metacinnabarite) as an adsorbent in gas-solid chromatography was investigated. Adsorption of some aliphatic, alicyclic, chlorimated and aromatic hydrocarbons and acetone is discussed in the light of adsorbate-adsorbent interactions. For the organic compounds used, thermodynamic parameters were determined and discussed in terms of the specific reactions that may take place on the adsorbent surface. Experimental data obtained show that mercury sulfide can be successfully employed as an adsorbent in analytical gas-solid chromatography.     

Structural and optical properties of ZnMgO nanostructures formed by Mg in-diffused ZnO nanowires

ZnMgO nanostructures with wurtzite phase were prepared by thermal diffusion of Mg into the ZnO nanowires. As ZnO light-emitting devices have been operated by using ZnMgO layers as energy barrier layers to confine the carriers, it is essential to realize the characterization of ZnMgO particularly. In this work, the Mg content in Zn_1−xMg_xO alloy determined by X-ray diffraction (XRD) and photoluminescence (PL) shows a good coincidence. The variation of lattice constant and the blueshift of near-band-edge emission indicate that Zn²⁺ ions are successfully substituted by Mg²⁺ ions in the ZnO lattice. In Raman-scattering studies, the change of E₂(high) phonon line shape in ZnO:Mg nanostructures reveals the microscopic substitutional disorder. In addition to the host phonons of ZnO, two additional bands around 383 and 510 cm⁻¹ are presumably attributed to the Mg-related vibrational modes.     

Structural and optical properties of barium titanate modified bismuth borate glasses

Glass samples with composition (70B₂O₃–29Bi₂O₃–1Dy₂O₃) modified with Barium titanate (BT), where BT is added in different successive weight percents, have been synthesized by conventional melt quenching technique. X-ray diffraction studies were performed in order to confirm the amorphous nature of the samples. The density of the samples has been found to decrease with an increase in the BT content, whereas an opposite trend has been observed in the molar volume. The analysis of FTIR and Raman spectra of the samples depicts that the glass network is built up of mainly BiO₆, BiO₃, BO₃ and BO₄ units. Its detailed analysis also revealed that the glass structure depends upon the amount of BT in the glass matrix and hence it acts as a modifier in the glass network. Introduction of BT into the glass matrix leads to the conversion of BO₃ trigonal units into BO₄ tetrahedral units, which results in a decrease in the degree of disorder in the glass network and makes the glass system more stable. The values of Urbach energy obtained for the prepared samples also confirmed the decrease in disorder in the glass network. The optical absorption measurements carried out for well-polished samples show a decrease in optical band gap energy with an increase in BT content whereas the molar refractivity shows the reverse trend. The Hydrogenic excitonic model applied to the studied glasses suggested that the present glass system favors direct transitions. The metallization criterion of the presently studied samples suggests that the prepared glasses may be potential candidates for nonlinear optical applications.     

Adsorption properties of aluminium oxide modified with palladium,gold, and cerium oxide nanoparticles

The adsorption properties of nanocomposites based on γ-Al₂O₃ modified with CeO_x, Au/CeO_x, and Pd/CeO_x nanoparticles with contents of deposited metals ranging from 0.07 to 1.71 wt % are investigated by means of dynamic sorption method. n-Alkanes (C₆–C₈), acetonitrile, diethyl ether, tetrahydrofuran, and dioxane are used as test adsorbates. Adsorption isotherms are measured, and the isosteric heats of adsorption of a number of test adsorbates are calculated. Electron-donor and electron-acceptor characteristics of the surfaces of γ-Al₂O₃-based nanocomposites are estimated. It is shown that Au(0.1%)/CeO_x(0.07%)/γ-Al₂O₃ nanocomposite, which has the lowest content of nanoparticles of the deposited metals, has the highest adsorption activity.     

Structural characterisation of titania or silane-grafted TiO2-SiO2 oxide composite and influence of ionic strength or electrolyte type on their electrokinetic properties

The electrokinetic properties of commercial titania and TiO₂-SiO₂ oxide composite, precipitated from an emulsion system with cyclohexane as the organic phase, are described. To extend the possible range of applications of the TiO₂-SiO₂ oxide composite, its surface was modified with selected alkoxysilanes: N-2-(aminoethyl)-3-aminopropyltrimethoxysilane, 3-methacryloxypropyltrimethoxysilane and vinyltrimethoxysilane. Modification with selected alkoxysilanes leads to the introduction of new chemical groups on the TiO₂-SiO₂ surface, which changes its initial properties and also the surface charge, manifested by the values of zeta potential. This study was undertaken to establish the effect of the type and amount of the modifier and type and ionic strength of the electrolyte on the zeta potential of the modified TiO₂-SiO₂ oxide composite and thus on the stability of the colloidal system. The powders were characterised by FTIR and elemental analysis to confirm the effectiveness of the surface modification. The structure of TiO₂-SiO₂ oxide composite was resolved by the wide-angle X-ray scattering method.     

Preparation and properties of polyimide/graphene oxide nanocomposite films with Mg ion crosslinker

Polyimide(PI)/graphene oxide(GO) nanocomposite films were prepared by chemical cross-linking using small amounts of divalent Mg ions. The PI/GO nanocomposites showed enhanced tensile properties compared to pristine PI due to the presence of exfoliated GO in the PI matrix as well as crosslinking between poly(amic acid) (PAA), which is a precursor of PI, and GO by Mg ions. The hydrogen bonds between PAA and GO suppressed the phase separation between PI and GO, and small amounts of Mg ions can bond between the oxygen functional groups and carboxylate groups of GO and PAA.     

Adsorption and catalytic properties of sulfated aluminum oxide modified with cobalt ions

The adsorption properties of sulfated aluminum oxide (9% SO ₄ ^2- /γ-Al₂O₃) and a cobalt-containing composite (0.5%Сo/SO ₄ ^2- /γ-Al₂O₃) based on it are studied via dynamic sorption. The adsorption isotherms of such test adsorbates as n-hydrocarbons (C₆–C₈), benzene, ethylbenzene, chloroform, and diethyl ether are measured, and their isosteric heats of adsorption are calculated. It is shown that the surface sulfation of aluminum oxide substantially improves its electron-accepting properties, and so the catalytic activity of SO ₄ ^2- /γ-Al₂O₃ in the liquid-phase alkylation of benzene with octene-1 at temperatures of 25–120°C is one order of magnitude higher than for the initial aluminum oxide. It is established that additional modification of sulfated aluminum oxide with cobalt ions increases the activity of this catalyst by 2–4 times. It is shown that adsorption sites capable of strong specific adsorption with both donating (aromatics, diethyl ether chemosorption) and accepting molecules (chloroform) form on the surface of sulfated γ-Al₂O₃ promoted by cobalt salt.     

Sorptive properties of graphite oxide on the surface of Al, Mg and Zn oxides

New carbon adsorbents for transition metal ions effective in a wide pH range were produced by creating a graphite oxide film on the surface of Al, Mg and Zn oxides.     

Textural and adsorption properties of silica modified with germanium(IV) oxide

Nitrogen low-temperature adsorption-desorption shows that the incorporation of germanium(IV) oxide into a silicate matrix under the conditions of the sol-gel transition gives rise to the formation of silica with a uniform mesoporous texture that has a predominating pore diameter of about 4 nm.     

Structural and rheological properties of hydrophobically modified alkali‐soluble emulsion solutions

Scattering and rheological experiments were carried out on hydrophobically modified alkali‐soluble emulsion solutions at pH ～ 7.3 as a function of the polymer concentration. The light scattering experiments revealed the existence of a liquidlike order for concentrations below approximately 0.1 × 10^?2g cm^?3 corresponding approximately to the close packing of microgels particles. Above this concentration, the zero‐shear viscosity rose sharply, whereas the ordering disappeared progressively. The results are discussed within the framework of gelation models of associating polymers. Diffusing wave spectroscopy experiments provided estimates of the high‐frequency modulus. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1985–1994, 2002     

Coating of oxide powders with alkoxide derived zirconia

Coating of alumina powders with tetragonal zirconia grains in the nanometric size range was obtained from a modified zirconium n-propoxide sol.Powder sedimentation observations and washing experiments were performed to show modifications of particles surface. Amorphous precursor film formation and crystalline zirconia coating were characterized by transmission electron microscopy. Crystallographic relationships between zirconia and alumina particles were also observed.