A novel threefold‐interpenetrating primitive cubic network based on a dinuclear Zn2 node

In the mixed‐ligand metal–organic polymeric compound poly[[μ₂‐1,4‐bis(imidazol‐1‐yl)benzene](μ₂‐terephthalato)dizinc(II)], [Zn₂(C₈H₄O₄)₂(C₁₂H₁₀N₄)]_n or [Zn₂(bdc)₂(bib)]_n [H₂bdc is terephthalic acid and bib is 1,4‐bis(imidazol‐1‐yl)benzene], the asymmetric unit contains one Zn^II ion, with two half bdc anions and one half bib molecule lying around inversion centers. The Zn^II ion is in a slightly distorted tetrahedral environment, coordinated by three carboxylate O atoms from three different bdc anions and by one bib N atom. The crystal structure is constructed from the secondary building unit (SBU) [Zn₂(CO₂)₂N₂O₂], in which the two metal centers are held together by two bdc linkers with bis(syn,syn‐bridging bidentate) bonding modes. The SBU is connected by bdc bridges to form a two‐dimensional grid‐like (4,4)‐layer, which is further pillared by the bib ligand. Topologically, the dinuclear SBU can be considered to be a six‐connected node, and the extended structure exhibits an elongated primitive approximately cubic framework. The three‐dimensional framework possesses a large cavity with dimensions of approximately 10 × 13 × 17 Å in cross‐section. The potential porosity is filled with mutual interpenetration of two identical equivalent frameworks, generating a novel threefold interpenetrating network with an α‐polonium topology [Abrahams, Hoskins, Robson & Slizys (2002). CrystEngComm, 4 , 478–482].     

2D Coordination Polymer with a 1D Carboxylate‐Copper Chain Based on Rare Icosanuclear and Tetranuclear Clusters

The 2D coordination polymer {[Cu₃₂( pa )₂₄(μ₂‐OH)₈(μ₃‐OH)₈( bibp )₈] · (CH₃OH)₃(H₂O)₅}_∞ was prepared by the solvothermal reaction of Cu(NO₃)₂ · 3H₂O with phthalic acid (H₂ pa ) and 4, 4′‐bis(imidazol‐1‐yl)biphenyl ( bibp ). The Cu^II ions show five different kinds of coordination environments, which are all connected by the pa ^2– ion into an interesting 1D carboxylate‐copper chain with rare icosacopper and tetracopper clusters. The 1D chain is further bridged by the bibp ligand to form a 2D layer, which could be viewed as an unprecedented (4, 4) lattice based on rectangular and butterfly‐shaped tetracopper clusters with the ratio of 2:6. The magnetic properties were studied, and the results show antiferromagnetic interaction in the complicated 1D chain.     

A self‐penetrated three‐dimensional zinc(II) coordination framework based on 4,4′,4′′‐(1,3,5‐triazine‐2,4,6‐triyl)tribenzoic acid and 1,3‐bis[(imidazol‐1‐yl)methyl]benzene ligands: synthesis,structure and properties

With the rapid development of metal–organic frameworks (MOFs), a variety of MOFs and their derivatives have been synthesized and reported in recent years. Commonly, multifunctional aromatic polycarboxylic acids and nitrogen‐containing ligands are employed to construct MOFs with fascinating structures. 4,4′,4′′‐(1,3,5‐Triazine‐2,4,6‐triyl)tribenzoic acid (H₃TATB) and the bidentate nitrogen‐containing ligand 1,3‐bis[(imidazol‐1‐yl)methyl]benzene (bib) were selected to prepare a novel Zn^II‐MOF under solvothermal conditions, namely poly[[tris{μ‐1,3‐bis[(imidazol‐1‐yl)methyl]benzene}bis[μ₃‐4,4′,4′′‐(1,3,5‐triazine‐2,4,6‐triyl)tribenzoato]trizinc(II)] dimethylformamide disolvate trihydrate], {[Zn₃(C₂₄H₁₂N₃O₆)₂(C₁₄H₁₄N₄)₃]·2C₃H₇NO·3H₂O}_n ( 1 ). The structure of 1 was characterized by single‐crystal X‐ray diffraction, IR spectroscopy and powder X‐ray diffraction. The properties of 1 were investigated by thermogravimetric and fluorescence analysis. Single‐crystal X‐ray diffraction shows that 1 belongs to the monoclinic space group Pc. The asymmetric unit contains three crystallographically independent Zn^II centres, two 4,4′,4′′‐(1,3,5‐triazine‐2,4,6‐triyl)tribenzoate (TATB^3?) anions, three complete bib ligands, one and a half free dimethylformamide molecules and three guest water molecules. Each Zn^II centre is four‐coordinated and displays a distorted tetrahedral coordination geometry. The Zn^II centres are connected by TATB^3? anions to form an angled ladder chain with large windows. Simultaneously, the bib ligands link Zn^II centres to give a helical Zn–bib–Zn chain. Furthermore, adjacent ladders are bridged by Zn–bib–Zn chains to form a fascinating three‐dimensional self‐penetrated framework with the short Schläfli symbol 6⁵·7·8¹³·9·10. In addition, the luminescence properties of 1 in the solid state and the fluorescence sensing of metal ions in suspension were studied. Significantly, compound 1 shows potential application as a fluorescent sensor with sensing properties for Zr⁴⁺ and Cu²⁺ ions.     

Tuning CO2 Uptake and Reversible Iodine Adsorption in Two Isoreticular MOFs through Ligand Functionalization

The synthesis and characterization of two isoreticular metal–organic frameworks (MOFs), {[Cd(bdc)(4‐bpmh)]}_n?2 n(H₂O) ( 1 ) and {[Cd(2‐NH₂bdc)(4‐bpmh)]}_n?2 n(H₂O) ( 2 ) [bdc=benzene dicarboxylic acid; 2‐NH₂bdc=2‐amino benzene dicarboxylic acid; 4‐bpmh=N,N‐bis‐pyridin‐4‐ylmethylene‐hydrazine], are reported. Both compounds possess similar two‐fold interpenetrated 3D frameworks bridged by dicarboxylates and a 4‐bpmh linker. The 2D Cd‐dicarboxylate layers are extended along the a‐axis to form distorted square grids which are further pillared by 4‐bpmh linkers to result in a 3D pillared‐bilayer interpenetrated framework. Gas adsorption studies demonstrate that the amino‐functionalized MOF 2 shows high selectivity for CO₂ (8.4 wt % 273 K and 7.0 wt % 298 K) over CH₄, and the uptake amounts are almost double that of non‐functional MOF 1 . Iodine (I₂) adsorption studies reveal that amino‐functionalized MOF 2 exhibits a faster I₂ adsorption rate and controlled delivery of I₂ over the non‐functionalized homolog 1 .     

High‐performance amorphous donor–acceptor conjugated polymers containing x‐shaped anthracene‐based monomer and 2,5‐bis(2‐octyldodecyl)pyrrolo[3,4‐c]pyrrole‐1,4(2H,5H)‐dione for organic thin‐film transistors

New diketopyrrolopyrrole (DPP)‐containing amorphous conjugated polymers, such as poly(3‐(5‐((9,10‐bis((4‐hexylphenyl)ethynyl)‐6‐(prop‐1‐ynyl)anthracen‐2‐yl)ethynyl) thiophen‐2‐yl)‐5‐(2‐hexyldecyl)‐2‐(2‐octyldodecyl)‐6‐(thiophen‐2‐yl)pyrrolo[3,4‐c]pyrrole‐1,4(2H,5H)‐dione) ( 4 ), and poly(3‐(5‐((2,6‐bis((4‐hexylphenyl)ethynyl)‐10‐(prop‐1‐ynyl)anthracen‐9‐yl)ethynyl)thiophen‐2‐yl)‐2,5‐bis(2‐octyldodecyl)‐6‐(thio phen‐2‐yl)pyrrolo[3,4‐c]pyrrole‐1,4(2H,5H)‐dione) ( 7 ), were successfully synthesized via Sonogashira coupling reactions under microwave conditions. Copolymer 7 , incorporating a DPP moiety at the 9,10‐position of the anthracene ring through a triple bond, showed a much lower bandgap energy (E_g = 1.81 eV) than copolymer 4 (E_g = 2.13 eV). Tuning of the molecular frontier orbital energies was achieved by only changing the anchoring position of dithiophenyl‐DPP from the 2,6‐ to the 9,10‐position in the anthracene ring. Because of the donor–acceptor (D–A) interaction and the two‐dimensional planar structure of the X‐shaped donor monomer, the resulting polymers showed good interchain π?π stacking in the thin‐film state, despite being amorphous polymers. When the newly synthesized polymer 7 was used as a semiconductor material in an organic thin‐film transistor, the best mobility of up to 0.12 cm² V^?1 s^?1 (I_on/off = ～ 4.4 × 10⁶) was observed, which is one of the highest values recorded for amorphous polymer films reported to date. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

One‐pot concomitant preparation of two copper(II) coordination polymers with different configurations of bridging bithiophene ligands

By employing the conjugated bithiophene ligand 5,5′‐bis(1H‐imidazol‐1‐yl)‐2,2′‐bithiophene (bibp), which can exhibit trans and cis conformations, two different Cu^II coordination polymers, namely, poly[[μ‐5,5′‐bis(1H‐imidazol‐1‐yl)‐2,2′‐bithiophene‐κ²N:N′](μ₂‐4,4′‐oxydibenzoato‐κ²O:O′)copper(II)], [Cu(C₁₄H₈O₅)(C₁₄H₁₀N₄S₂)]_n or [Cu(bibp)(oba)]_n, (I), and catena‐poly[μ‐aqua‐bis[μ‐5,5′‐bis(1H‐imidazol‐1‐yl)‐2,2′‐bithiophene‐κ²N:N′]bis(μ₃‐4,4′‐oxydibenzoato)‐κ³O:O′:O′′;κ⁴O:O′,O′′:O′‐dicopper(II)], [Cu₂(C₁₄H₈O₅)₂(C₁₄H₁₀N₄S₂)(H₂O)]_n or [Cu₂(bibp)(oba)₂(H₂O)]_n, (II), have been prepared through one‐pot concomitant crystallization and characterized by single‐crystal X‐ray diffraction, IR spectroscopy, elemental analysis, powder X‐ray diffraction (PXRD) and thermogravimetric (TG) analysis. Single‐crystal X‐ray diffraction indicates that the most interesting aspect of the structure is the existence of sole trans and cis conformations of the bibp ligand in a single net of (I) and (II), respectively. Compound (I) displays a threefold interpenetrating three‐dimensional framework with a 4‐connected {6⁵.8} cds topology, whereas (II) features a one‐dimensional chain structure. In the crystal of (II), the polymeric chains are further extended through C—H…O hydrogen bonds and C—H…π interactions into a three‐dimensional supramolecular architecture. In addition, strong intramolecular O—H…O hydrogen bonds formed between the bridging water molecules and the carboxylate O atoms improve the stability of the framework of (II). Furthermore, solid‐state UV–Vis spectroscopy experiments show that compounds (I) and (II) exhibit optical band gaps which are characteristic for optical semiconductors, with values of 2.70 and 2.26 eV, respectively.     

Coordination Frameworks based on 3,5‐Bis(imidazole‐1‐yl)­pyridine and Aromatic Dicarboxylate Ligands: Synthesis,Crystal Structures,and Photoluminescent Properties

Three metal coordination polymers [Zn(bdc)(L)(H₂O)]_n ( 1 ), [Co(pta)(L)(H₂O)₂]_n ( 2 ), and [Cd(tda)(L)(H₂O)]_n ( 3 ) [H₂bdc = 1,2‐benzene dicarboxylate acid, H₂pta = terephthalic acid, H₂tda = 2,5‐thiophenedicarboxylic acid, L = 3,5‐bis(imidazole‐1‐yl)pyridine] were synthesized and structurally characterized by IR spectroscopy, elemental analysis, X‐ray powder diffraction, and X‐ray single crystal diffraction. Complex 1 shows a three‐dimensional (3D) structure with cco topology with the symbol 6⁵ · 8, whereas complex 2 features a 3D structure with cds topology with the symbol 6⁵ · 8. Complex 3 has a 2D network constructed by the cadmium atoms bridged through the ligands tda and L. Their X‐ray powder diffraction patterns were compared with the simulated ones. Moreover, their luminescent properties were investigated in the solid state at room temperature, and the thermogravimetric analyses were carried out to study the thermal stability of the 3D networks.     

Three novel topologically different metal–organic frameworks built from 3‐nitro‐4‐(pyridin‐4‐yl)benzoic acid

The design and synthesis of metal–organic frameworks (MOFs) have attracted much interest due to the intriguing diversity of their architectures and topologies. However, building MOFs with different topological structures from the same ligand is still a challenge. Using 3‐nitro‐4‐(pyridin‐4‐yl)benzoic acid (HL) as a new ligand, three novel MOFs, namely poly[[(N,N‐dimethylformamide‐κO)bis[μ₂‐3‐nitro‐4‐(pyridin‐4‐yl)benzoato‐κ³O,O′:N]cadmium(II)] N,N‐dimethylformamide monosolvate methanol monosolvate], {[Cd(C₁₂H₇N₂O₄)₂(C₃H₇NO)]·C₃H₇NO·CH₃OH}_n, ( 1 ), poly[[(μ₂‐acetato‐κ²O:O′)[μ₃‐3‐nitro‐4‐(pyridin‐4‐yl)benzoato‐κ³O:O′:N]bis[μ₃‐3‐nitro‐4‐(pyridin‐4‐yl)benzoato‐κ⁴O,O′:O′:N]dicadmium(II)] N,N‐dimethylacetamide disolvate monohydrate], {[Cd₂(C₁₂H₇N₂O₄)₃(CH₃CO₂)]·2C₄H₉NO·H₂O}_n, ( 2 ), and catena‐poly[[[diaquanickel(II)]‐bis[μ₂‐3‐nitro‐4‐(pyridin‐4‐yl)benzoato‐κ²O:N]] N,N‐dimethylacetamide disolvate], {[Ni(C₁₂H₇N₂O₄)₂(H₂O)₂]·2C₄H₉NO}_n, ( 3 ), have been prepared. Single‐crystal structure analysis shows that the Cd^II atom in MOF ( 1 ) has a distorted pentagonal bipyramidal [CdN₂O₅] coordination geometry. The [CdN₂O₅] units as 4‐connected nodes are interconnected by L^? ligands to form a fourfold interpenetrating three‐dimensional (3D) framework with a dia topology. In MOF ( 2 ), there are two crystallographically different Cd^II ions showing a distorted pentagonal bipyramidal [CdNO₆] and a distorted octahedral [CdN₂O₄] coordination geometry, respectively. Two Cd^II ions are connected by three carboxylate groups to form a binuclear [Cd₂(COO)₃] cluster. Each binuclear cluster as a 6‐connected node is further linked by acetate groups and L^? ligands to produce a non‐interpenetrating 3D framework with a pcu topology. MOF ( 3 ) contains two crystallographically distinct Ni^II ions on special positions. Each Ni^II ion adopts an elongated octahedral [NiN₂O₄] geometry. Each Ni^II ion as a 4‐connected node is linked by L^? ligands to generate a two‐dimensional network with an sql topology, which is further stabilized by two types of intermolecular OW—HW…O hydrogen bonds to form a 3D supramolecular framework. MOFs ( 1 )–( 3 ) were also characterized by powder X‐ray diffraction, IR spectroscopy and thermogravimetic analysis. Furthermore, the solid‐state photoluminescence of HL and MOFs ( 1 ) and ( 2 ) have been investigated. The photoluminescence of MOFs ( 1 ) and ( 2 ) are enhanced and red‐shifted with respect to free HL. The gas adsorption investigation of MOF ( 2 ) indicates a good separation selectivity (71) of CO₂/N₂ at 273 K (i.e. the amount of CO₂ adsorption is 71 times higher than N₂ at the same pressure).     

Effects of substituted side‐chain position on donor–acceptor conjugated copolymers

The optical properties and electrical properties of a series of low‐band‐gap conjugated copolymers, in which alkyl side chains were substituted at various positions, were investigated using donor–acceptor conjugated copolymers consisting of a cyclopentadithiophene derivative and dithienyl‐benzothiadiazole. With substituted side chains, the intrinsic properties of the copolymers were significantly altered by perturbations of the intramolecular charge transfer. The absorption of poly[2, 6‐(4,4‐bis(2‐octyl)‐4H‐cyclopenta‐[2,1‐b:3,4‐b′]dithiophene)‐alt‐4, 7‐bis(4‐octyl‐thiophene‐2‐yl)benzo‐2,1,3‐thiadiazole] [ PCPDT‐ttOTBTOT ( P2 )], which assumed a tail–tail configuration, tended to blue shift relative to the absorption of poly[2,6‐(4,4‐bis(2‐octyl)‐4H‐cyclopenta‐[2,1‐b:3,4‐b′]dithiophene)‐alt‐4,7‐bis (thiophene‐2‐yl)benzo‐2,1,3‐thiadiazole] [ PCPDT‐TBTT ( P1 )]. The absorption of poly[2,6‐(4,4‐bis(2‐octyl)‐4H‐cyclopenta‐[2,1‐b:3, 4‐b′]dithiophene)‐alt‐4,7‐bis(3‐octyl‐thiophene‐2‐yl)benzo‐2,1,3‐thiadiazole] [ PCPDT‐hhOTBTOT ( P3 )], which assumed a head–head configuration, was blue shifted relative to that of P2 . The electrical transport properties of field‐effect transistors were sensitive to the side chain position. The field‐effect mobility in P2 (μ₂ = 1.8 × 10^?3 cm²/V s) was slightly lower than that in P1 (μ₁ = 4.9 × 10^?3 cm²/V s). However, the mobility of P3 was very low (μ₃ = 3.8 × 10^?6 cm²/V s). Photoexcitation spectroscopy showed that the charge generation efficiency (shown in transient absorption spectra) and polaron pair mobility in P1 and P2 were higher than in P3 , yielding P1 and P2 device performances that were better than the performance of devices based on P3 . © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Adsorption behaviour of a CdII–triazole MOF for butan‐2‐one in a single‐crystal‐to‐single‐crystal (SCSC) fashion: the role of hydrogen bonding and C—H…π interactions

The adsorption behaviour of the Cd^II–MOF {[Cd(L)₂(ClO₄)₂]·H₂O ( 1 ), where L is 4‐amino‐3,5‐bis[3‐(pyridin‐4‐yl)phenyl]‐1,2,4‐triazole, for butan‐2‐one was investigated in a single‐crystal‐to‐single‐crystal (SCSC) fashion. A new host–guest system that encapsulated butan‐2‐one molecules, namely poly[[bis{μ₃‐4‐amino‐3,5‐bis[3‐(pyridin‐4‐yl)phenyl]‐1,2,4‐triazole}cadmium(II)] bis(perchlorate) butanone sesquisolvate], {[Cd(C₂₄H₁₈N₆)₂](ClO₄)₂·1.5C₄H₈O}_n, denoted C₄H₈O@Cd‐MOF ( 2 ), was obtained via an SCSC transformation. MOF 2 crystallizes in the tetragonal space group P4₃2₁2. The specific binding sites for butan‐2‐one in the host were determined by single‐crystal X‐ray diffraction studies. N—H…O and C—H…O hydrogen‐bonding interactions and C—H…π interactions between the framework, ClO₄^? anions and guest molecules co‐operatively bind 1.5 butan‐2‐one molecules within the channels. The adsorption behaviour was further evidenced by ¹H NMR, IR, TGA and powder X‐ray diffraction experiments, which are consistent with the single‐crystal X‐ray analysis. A ¹H NMR experiment demonstrates that the supramolecular interactions between the framework, ClO₄^? anions and guest molecules in MOF 2 lead to a high butan‐2‐one uptake in the channel.     

Two Unusual Two‐dimensional (4,4) Network Cadmium Coordination Polymers Based on Flexible Bis(triazole) and Rigid Benzenedicarboxylate Co‐ligands

Two cadmium(II) coordination polymers {[Cd(btp)(NO₂‐1,3‐bdc)(H₂O)]·H₂O}_n ( 1 ) and {[Cd(btp)(1,2‐bdc)(H₂O)]·H₂O}_n ( 2 ) were synthesized by the reaction of 1,3‐bis(1,2,4‐triazol‐1‐yl)propane (btp), 5‐nitroisophthalate (NO₂‐1,3‐bdc), and 1,2‐benzenedicarboxylate (1,2‐bdc). 1 consists of undulated 2D (4,4) networks. Two identical undulated layers are parallel stacking to give a (2D→2D) polythreaded 2D network. A 3D supramolecular architectute is constructed through the hydrogen bond interactions. 2 has an unusual 2D (4,4) network with a thickness of ca. 10 Å. The btp ligands exhibit the anti‐gauche conformation in 1 and the anti‐anti conformation in 2 . The flexible btp ligand exhibits the key role in the assembly of the topologies of 1 and 2 . The luminescence and thermal stability were investigated.     

Regioselective Photochemical Cycloaddition Reactions of Diolefinic Ligands in Coordination Polymers

The pure diolefinic ligand 1,4‐bis(pyridin‐4‐yl)‐1,3‐butadiene (bpbde) is photostable in the crystalline state. With the assistance of coordination‐driven metal‐organic assemblies, the photoreactivity of this diolefinic ligand can be significantly enhanced. A hydrothermal reaction of bpbde with Cd(NO₃)₂?4 H₂O and the auxiliary ligand adipic acid resulted in the formation of a two‐dimensional photoreactive coordination polymer (CP), [Cd(adipate)(bpbde)]_n ( 1 ). When the aliphatic carboxylic acid was replaced by pimelic acid, another photoreactive CP [Cd(pimelate)(bpbde)]_n ( 2 ) with a three‐dimensional framework was obtained. With irradiation of 365 nm UV light, the bpbde ligands in crystalline 1 and 2 underwent a regioselective photochemical [2+2] cycloaddition reaction and converted to 3,4,7,8‐tetra(pyridin‐4‐yl)tricyclo[4.2.0.0^2,5]octane (tptco) and 1,3‐bis(pyridin‐4‐yl)‐2,4‐bis(2‐(pyridin‐4‐yl)vinyl)cyclobutane (bpbpvcb), respectively. The results provide an interesting insight into the rational design of highly regio‐ or stereoselective photocatalytic reactions for the formation of special organic molecules.     

Syntheses,Crystal Structures,and Magnetic Properties of Two Cobalt Coordination Polymers Constructed From 1,3‐Bis(2,4‐dicarboxyphenyl) Benzene and Bis(imidazole) Linkers

Abstract. The 3D cobalt(II) coordination polymers [Co_1.5(HDDB)(1,4‐bib)_1.5(H₂O)]_n ( 1 ), and {[Co₂(DDB)(1,3‐bib)₂(μ₂‐H₂O)] · H₂O}_n ( 2 ) were assembled by mixed‐ligand synthetic strategy [H₄DDB = 1,3‐bis(2,4‐dicarboxyphenyl) benzene, 1,3‐bib = 1,3‐bis(1H‐imidazol‐4‐yl)benzene, and 1,4‐bib = 1,4‐bis(1H‐imidazol‐4‐yl)benzene]. Their structures were determined by single‐crystal X‐ray diffraction analyses and further characterized by elemental analyses (EA), IR spectroscopy, powder X‐ray diffraction (PXRD), and thermogravimetric (TG) analyses. Single X‐ray diffraction analysis reveals that complex 1 is an interestingly 3D (3,3.6)‐connected (6³)₄(6⁵ · 8⁸ · 10²) net, and complex 2 is an unprecedented dinuclear [Co₂(COO)(μ₂‐H₂O)] SBUs based 3D (3,6)‐connected (3 · 6 · 7)(3² · 4³ · 5⁴ · 6³ · 7 · 8²) net. Additionally, the magnetic properties of 2 were investigated.     

Synthesis,properties, and field effect transistor characteristics of new thiophene‐[1,2,5]thiadiazolo[3,4‐g]quinoxaline‐thiophene‐based conjugated polymers

Four new conjugated copolymers based on the moiety of bis(4‐hexylthiophen‐2‐yl)‐6,7‐diheptyl‐[1,2,5]thiadiazolo[3,4‐g]quinoxaline (BTHTQ) were synthesized and characterized, including poly(6,7‐diheptyl‐4,9‐bis(4‐hexylthiophen‐2‐yl)‐[1,2,5]thiadiazolo[3,4‐g]quinoxaline) (PBTHTQ), poly‐(6,7‐diheptyl‐4,9‐bis(4‐hexylthiophen‐2‐yl)‐[1,2,5]thiadiazolo‐[3,4‐g]quinoxaline‐alt‐2,5‐thiophene) (PTTHTQ), poly(6,7‐diheptyl‐4,9‐bis(4‐hexylthiophen‐2‐yl) [1,2,5]‐thiadiazolo‐[3,4‐g]quinoxaline‐alt‐9,9‐dioctyl‐2,7‐fluore‐ne) (PFBTHTQ), and poly(6,7‐diheptyl‐4,9‐bis(4‐hexylthiophen‐2‐yl)‐[1,2,5]thiadiazolo[3,4‐g]quinoxaline‐alt‐1,4‐bis(decyloxy)phenylene) (PPBTHTQ). The λ_max of PBTHTQ, PTTHTQ, PFBTHTQ, and PPBTHTP thin films was shown at 780, 876, 734, and 710 nm, respectively, with the corresponding optical band gaps (E) of 1.31, 1.05, 1.40, and 1.43 eV. The relatively small band gaps of the synthesized polymers suggested the significance of intramolecular charge transfer between the donor and TQ moiety. The estimated hole mobilities of PBTHTQ, PTTHTQ, and PFBTHTQ‐based field effect transistor devices using CHCl₃ solvent were 8.5 × 10^?5, 8.5 × 10^?4, and 2.8 × 10^?5 cm² V^?1 s^?1, respectively, but significantly enhanced to 1.6 × 10^?4, 3.8 × 10^?3, and 1.5 × 10^?4 cm² V^?1 s^?1 using high boiling point solvent of chlorobenzene (CB). The higher hole mobility of PTTHTQ than the other two copolymers was attributed from its smaller band gap or ordered morphology [wormlike (chloroform) or needle‐like (CB)]. The characteristics of small band gap and high mobility suggest the potential applications of the BTHTQ‐based conjugated copolymers in electronic and optoelectronic devices. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6305–6316, 2008     

Syntheses,Crystal Structures,and Photocatalytic Activities of Three Copper Coordination Polymers Based on Bis(1H‐imidazol‐4‐yl)benzene/3‐(2‐Pyridyl)pyrazole

Three copper(II) coordination polymers (CuCPs), namely, [Cu_0.5(1,4‐bib)(SO₄)_0.5]_n ( 1 ), {[Cu(1,3‐bib)₂(H₂O)] · SO₄ · H₂O}_n ( 2 ), and [Cu(bpz)(SO₄)_0.5]_n ( 3 ), were assembled from the reaction of three N‐donors [1,4‐bib = 1,4‐bis(1H‐imidazol‐4‐yl)benzene, 1,3‐bib = 1,3‐bis(1H‐imidazol‐4‐yl)benzene, and Hbpz = 3‐(2‐pyridyl)pyrazole] with copper sulfate under hydrothermal conditions. Their structures were determined by single‐crystal X‐ray diffraction analyses and further characterized by elemental analyses (EA), IR spectroscopy, powder X‐ray diffraction (PXRD), and thermogravimetric analyses (TGA). Structure analyses reveal that complex 1 is a 3D 6‐connected {4¹² · 6³}‐ pcu net, complex 2 is a fourfold 3D 4‐connected 6⁶‐ dia net, whereas complex 3 is a 1D snake‐like chain, which further expanded into 3D supramolecular architectures with the help of C–H ··· O hydrogen bonds. Moreover, the photocatalytic tests demonstrate that the obtained CuCPs are photocatalysts in the degradation of MB with the efficiency is 86.4 % for 1 , 75.3 % for 2 , and 91.3 % for 3 after 2 h, respectively.     

Microporous La–Metal–Organic Framework (MOF) with Large Surface Area

A microporous La–metal‐organic framework (MOF) has been synthesized by the reaction of La(NO₃)₃ ? 6 H₂O with a ligand 4,4′,4′′‐s‐triazine‐1,3,5‐triyltri‐p‐aminobenzoate (TATAB) featuring three carboxylate groups. Crystal structure analysis confirms the formation of 3D MOF with hexagonal micropores, a Brunauer–Emmett—Teller (BET) surface area of 1074 m² g^?1 and high thermal and chemical stability. The CO₂ adsorption capacities are 76.8 cm³ g^?1 at 273 K and 34.6 cm³ g^?1 at 293 K, a highest measured CO₂ uptake for a Ln–MOFs.     

Luminescence Tuning and White‐Light Emission of Co‐doped Ln–Cd–Organic Frameworks

Four new three‐dimensional isostructural lanthanide–cadmium metal–organic frameworks (Ln–Cd MOFs), [LnCd₂(imdc)₂(Ac)(H₂O)₂]?H₂O (Ln=Pr ( 1 ), Eu ( 2 ), Gd ( 3 ), and Tb ( 4 ); H₃imdc=4,5‐imidazoledicarboxylic acid; Ac=acetate), have been synthesized under hydrothermal conditions and characterized by IR, elemental analyses, inductively coupled plasma (ICP) analysis, and X‐ray diffraction. Single‐crystal X‐ray diffraction shows that two Ln^III ions are surrounded by four Cd^II ions to form a heteronuclear building block. The blocks are further linked to form 3D Ln–Cd MOFs by the bridging imdc^3? ligand. Furthermore, the left‐ and right‐handed helices array alternatively in the lattice. Eu–Cd and Tb–Cd MOFs can emit characteristic red light with the Eu^III ion and green light with the Tb^III ion, respectively, while both Gd–Cd and Pr–Cd MOFs generate blue emission when they are excited. Different concentrations of Eu³⁺ and Tb³⁺ ions were co‐doped into Gd–Cd/Pr–Cd MOFs, and tunable luminescence from yellow to white was achieved. White‐light emission was obtained successfully by adjusting the excitation wavelength or the co‐doping ratio of the co‐doped Gd–Cd and Pr–Cd MOFs. These results show that the relative emission intensity of white light for Gd–Cd:Eu³⁺,Tb³⁺ MOFs is stronger than that of Pr–Cd:Eu³⁺,Tb³⁺ MOFs, which implies that the Gd complex is a better matrix than the Pr complex to obtain white‐light emission materials.     

Framework Cationization by Preemptive Coordination of Open Metal Sites for Anion‐Exchange Encapsulation of Nucleotides and Coenzymes

Cationic frameworks can selectively trap anions through ion exchange, and have applications in ion chromatography and drug delivery. However, cationic frameworks are much rarer than anionic or neutral ones. Herein, we propose a concept, preemptive coordination (PC), for targeting positively charged metal–organic frameworks (P‐MOFs). PC refers to proactive blocking of metal coordination sites to preclude their occupation by neutralizing ligands such as OH^?. We use 20 MOFs to show that this PC concept is an effective approach for developing P‐MOFs whose high stability, porosity, and anion‐exchange capability allow immobilization of anionic nucleotides and coenzymes, in addition to charge‐ and size‐selective capture or separation of organic dyes. The CO₂ and C₂H₂ uptake capacity of 117.9 cm³ g^?1 and 148.5 cm³ g^?1, respectively, at 273 K and 1 atm, is exceptionally high among cationic framework materials.     

Dynamic Equilibria in Solvent‐Mediated Anion,Cation and Ligand Exchange in Transition‐Metal Coordination Polymers: Solid‐State Transfer or Recrystallisation?

The solution properties of a series of transition‐metal–ligand coordination polymers [ML(X)_n]_∞ [M=Ag^I, Zn^II, Hg^II and Cd^II; L=4,4′‐bipyridine (4,4′‐bipy), pyrazine (pyz), 3,4′‐bipyridine (3,4′‐bipy), 4‐(10‐(pyridin‐4‐yl)anthracen‐9‐yl)pyridine (anbp); X=NO₃^?, CH₃COO^?, CF₃SO₃^?, Cl^?, BF₄^?; n=1 or 2] in the presence of competing anions, metal cations and ligands have been investigated systematically. Providing that the solubility of the starting complex is sufficiently high, all the components of the coordination polymer, namely the anion, the cation and the ligand, can be exchanged on contact with a solution phase of a competing component. The solubility of coordination polymers is a key factor in the analysis of their reactivity and this solubility depends strongly on the physical properties of the solvent and on its ability to bind metal cations constituting the backbone of the coordination polymer. The degree of reversibility of these solvent‐induced anion‐exchange transformations is determined by the ratio of the solubility product constants for the starting and resultant complexes, which in turn depend upon the choice of solvent and the temperature. The extent of anion exchange is controlled effectively by the ratio of the concentrations of incoming ions to outgoing ions in the liquid phase and the solvation of various constituent components comprising the coordination polymer. These observations can be rationalised in terms of a dynamic equilibrium of ion exchange reactions coupled with Ostwald ripening of crystalline products. The single‐crystal X‐ray structures of [Ag(pyz)ClO₄]_∞ ( 1 ), {[Ag(4,4′‐bipy)(CF₃SO₃)] ? CH₃CN}_∞ ( 2 ), {[Ag(4,4′‐bipy)(CH₃CN)]ClO₄ ? 0.5 CH₃CN}_∞ ( 3 ), metal‐free anbp ( 4 ), [Ag(anbp)NO₃(H₂O)]_∞ ( 5 ), {[Cd(4,4′‐bipy)₂(H₂O)₂](NO₃)₂ ? 4 H₂O}_∞ ( 6 ) and {[Zn(4,4′‐bipy)SO₄(H₂O)₃] ? 2 H₂O}_∞ ( 7 ) are reported.     

Cadmium(II) iodide and thiocyanate complexes adopted by polycyclic 1,4‐bis(pyridazin‐4‐yl)benzene: interplay of coordination and π–π stacking interactions

New complexes containing the 1,4‐bis(pyridazin‐4‐yl)benzene ligand, namely diaquatetrakis[1,4‐bis(pyridazin‐4‐yl)benzene‐κN²]cadmium(II) hexaiodidodicadmate(II), [Cd(C₁₄H₁₀N₄)₄(H₂O)₂][Cd₂I₆], (I), and poly[[μ‐1,4‐bis(pyridazin‐4‐yl)benzene‐κ²N²:N^2′]bis(μ‐thiocyanato‐κ²N:S)cadmium(II)], [Cd(NCS)₂(C₁₄H₁₀N₄)]_n, (II), demonstrate the adaptability of the coordination geometries towards the demands of slipped π–π stacking interactions between the extended organic ligands. In (I), the discrete cationic [Cd—N = 2.408 (3) and 2.413 (3) Å] and anionic [Cd—I = 2.709 (2)–3.1201 (14) Å] entities are situated across centres of inversion. The cations associate via complementary O—H...N^2′ hydrogen bonding [O...N = 2.748 (4) and 2.765 (4) Å] and extensive triple π–π stacking interactions between pairs of pyridazine and phenylene rings [centroid–centroid distances (CCD) = 3.782 (4)–4.286 (3) Å] to yield two‐dimensional square nets. The [Cd₂I₆]²⁻ anions reside in channels generated by packing of successive nets. In (II), the Cd^II cation lies on a centre of inversion and the ligand is situated across a centre of inversion. A two‐dimensional coordination array is formed by crosslinking of linear [Cd(μ‐NCS)₂]_n chains [Cd—N = 2.3004 (14) Å and Cd—S = 2.7804 (5) Å] with N²:N^2′‐bidentate organic bridges [Cd—N = 2.3893 (12) Å], which generate π–π stacks by double‐slipped interactions between phenylene and pyridazine rings [CCD = 3.721 (2) Å].