Single electron transfer‐living radical polymerization of methyl methacrylate in fluoroalcohol: Dual control over molecular weight and tacticity

The Cu(0)‐mediated single electron transfer‐living radical polymerization (SET‐LRP) of methyl methacrylate (MMA) using ethyl 2‐bromoisobutyrate (EBiB) as an initiator with Cu(0)/N,N,N′,N′′,N′′‐pentamethyldiethylenetriamine as a catalyst system in 1,1,1,3,3,3‐hexafluoro‐2‐propanol (HFIP) was studied. The polymerization showed some living features: the measured number‐average molecular weight (M_n,GPC) increased with monomer conversion and produced polymers with relatively low polydispersities. The increase of HFIP concentration improved the controllability over the polymerization with increased initiation efficiency and lowered polydispersity values. ¹H NMR, MALDI‐TOF‐MS spectra, and chain extension reaction confirmed that the resultant polymer was end‐capped by EBiB species, and the polymer can be reactivated for chain extension. In contrast, in the cases of dimethyl sulfoxide or N,N‐dimethylformamide as reaction solvent, the polymerizations were uncontrolled. The different effects of the solvents on the polymerization indicated that the mechanism of SET‐LRP differed from that of atom transfer radical polymerization. Moreover, HFIP also facilitated the polymerization with control over stereoregularity of the polymers. Higher concentration of HFIP and lower reaction temperature produced higher syndiotactic ratio. The syndiotactic ratio can be reached to about 0.77 at 1/1.5 (v/v) of MMA/HFIP at ?18 °C. In conclusion, using HFIP as SET‐LRP solvent, the dual control over the molecular weight and tacticity of PMMA was realized. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6316–6327, 2009     

Carbocations as Lewis Acid Catalysts in Diels–Alder and Michael Addition Reactions

In general, Lewis acid catalysts are metal‐based compounds that owe their reactivity to a low‐lying empty orbital. However, one potential Lewis acid that has received negligible attention as a catalyst is the carbocation. We have demonstrated the potential of the carbocation as a highly powerful Lewis acid catalyst for organic reactions. The stable and easily available triphenylmethyl (trityl) cation was found to be a highly efficient catalyst for the Diels–Alder reaction for a range of substrates. Catalyst loadings as low as 500 ppm, excellent yields, and good endo/exo selectivities were achieved. Furthermore, by changing the electronic properties of the substituents on the tritylium ion, the Lewis acidity of the catalyst could be tuned to control the outcome of the reaction. The ability of this carbocation as a Lewis acid catalyst was also further extended to the Michael reaction.     

Optically Active Helical Lanthanide Complexes: Storable Chiral Lewis Acidic Catalysts for Enantioselective Diels–Alder Reaction of Siloxydienes

Lanthanide triflates and a series of hexadentate chiral ligand complexes were synthesized. X‐ray‐quality crystals were obtained from mixtures of the lanthanide complexes, which were helical in shape. The complexes showed Lewis acidity and catalyzed the enantioselective Diels–Alder reaction of electron‐rich siloxydienes. The complexes were stable enough to be stored at ambient temperature on a laboratory bench and retained their Lewis acidity even after a month.     

Tuning the Lewis Acidity of Boranes in Frustrated Lewis Pair Chemistry: Implications for the Hydrogenation of Electron‐Poor Alkenes

An analysis of the metal‐free reduction of electron deficient olefins by frustrated Lewis pairs indicates that the rate‐determining step might be either the heterolytic cleavage of H₂ to form an ‐onium borohydride salt, or the subsequent transfer of the hydride moiety to the substrate following a Michael‐type addition reaction. While the use of strong Lewis acids such as B(C₆F₅)₃ facilitates the first of these processes, hydride transfer to the olefin should be contrarily favoured by the use of weak Lewis acids which, for this very same reason, might be unable to promote the prior H₂ split. After systematic testing of several boranes of different Lewis acidity (assessed by using the Childs’ method) and steric demand, an optimal situation that employs tris(2,4,6‐trifluorophenyl)borane was reached. Mixtures of this borane with 1,4‐diazabicyclo[2.2.2]octane (DABCO) exhibited excellent catalytic activity for the hydrogenation of alkylidene malonates. In fact, this transformation could be achieved under milder conditions than those we reported previously. Moreover, the reaction scope could be expanded to other electron deficient olefins containing esters, sulfones or nitro functionalities as electron‐withdrawing substituents.     

Functionalization of the methylene bridges of the calix[6]arene scaffold

The bromine atoms of the hexabromo calixarene derivative 3 were replaced by other groups under S(N)1 conditions, allowing the facile synthesis of calix[6]arene derivatives incorporating identical functionalities at all bridges. Heating at reflux a mixture of 3 and the appropriate alcohol incorporated primary and secondary alkoxy substituents. Hydride abstraction was observed when the reaction with EtOH and i-PrOH was conducted in hexafluoroisopropanol (HFIP). Solvolysis of 3 in TFE in the presence of strong nucleophiles (such as N3(-) and aniline) afforded the corresponding hexaazido and hexaanilino derivatives. Hydroxyl groups were incorporated into the calix[6]arene scaffold via acetolysis of 3, followed by LiAlH4 reduction of the hexaacetate derivative obtained. Friedel-Crafts alkylations in the absence of Lewis acids were conducted by heating at reflux a mixture of 3, HFIP, and a substituted benzene derivative (e.g, m-xylene, p-methyl anisole, mesitylene). The calix[6]arene bridges were alkylated by heating at reflux a mixture of 3 and 2,4-pentanedione in TFE or HFIP. In all cases the reaction proceeded with high diastereoselectivity, and the major isomer isolated was assigned to the rc5 (i.e., all-cis) form. NMR spectroscopy indicates that the conformation adopted by the macrocycle possesses 3-fold symmetry (a "pinched cone") that is rigid in the laboratory time scale in the mesityl-substituted derivative.     

Lewis Acid Mediated Vinyl‐Transfer Reaction of Alkynes to N‐Alkylimines by Using the N‐Alkyl Residue as a Sacrificial Hydrogen Donor

A variety of N‐alkyl‐α,α‐dichloroaldimines were vinylated by terminal acetylenes in the presence of Lewis acids such as In(OTf)₃ or BF₃ ? OEt₂ and hexafluoroisopropanol (HFIP) as an additive. The reaction proceeds at ambient temperature and leads to geometrically pure allylic β,β‐dichloroamines. This approach is complementary to previously reported transition‐metal‐catalyzed vinyl‐transfer methods, which are not applicable to aliphatic imines and are restricted to imines that contain an electron‐withdrawing nitrogen substituent. In the present approach, terminal alkynes were used as a source of the vinyl residue, and the N‐alkyl moiety of the imine acts as a sacrificial hydrogen donor. The additional advantage of this methodology is the fact that no external toxic or hazardous reducing agents or molecular hydrogen has to be used. This new methodology nicely combines a C(sp²)? C(sp) bond formation, hydride transfer, and an unusual cleavage of an unactivated C? N bond, thereby giving rise to functionalized primary allylic amines. A detailed experimental study supported by DFT calculations of the mechanism has been done.     

Efficient Lewis acid ionic liquid-catalyzed synthesis of the key intermediate of coenzyme Q10 under microwave irradiation

An efficient synthesis of a valuable intermediate of coenzyme Q(10) by microwave-assisted Lewis acidic ionic liquid (IL)-catalyzed Friedel-Crafts alkylation is reported. The acidity of six [Etpy]BF(4)-based ionic liquids was characterized by means of the FT-IR technique using acetonitrile as a molecular probe. The catalytic activities of these ionic liquids were correlated with their Lewis acidity. With increasing Lewis acid strength of the ionic liquids, their catalytic activity in the Friedel-Crafts reaction increased, except for [Etpy]BF(4)-AlCl(3). The effects of the reaction system, the molar fraction of Lewis acid in the Lewis acid ILs and heating techniques were also investigated. Among the six Lewis acid ionic liquids tested [Etpy]BF(4)-ZnCl(2) showed the best catalytic activity, with a yield of 89% after a very short reaction time (150 seconds). This procedure has the advantages of higher efficiency, better reusability of ILs, energy conservation and eco-friendliness. The method has practical value for preparation of CoQ(10) on an industrial scale.     

Substituent and solvent effects on the beta-heterolysis reaction of beta-hydroxy arylethyl radicals

Time-resolved conversion of a series of beta-hydroxy arylethyl radicals with electron-donating and -withdrawing aromatic substituents to their corresponding styrene radical cation via heterolytic loss of the beta-hydroxy leaving group was examined with nanosecond laser flash photolysis. In all cases, the reaction was catalyzed by added perchloric acid. Radicals 2a-d reacted via a pre-equilibrium protonation mechanism in acidic 1,1,1,3,3,3-hexafluoroisopropanol (HFIP), and measuring rate constants for radical cation formation as a function of acid content allowed for the determination of absolute rate constants ranging from 3.6 x 10(6) to 3.8 x 10(7) s(-1) for the loss of water from the protonated beta-hydroxy arylethyl radicals 2a-d, as well as the acidity constants, pKa approximately 1.5 (in HFIP), for the protonated radicals. The 4-methoxy-substituted beta-hydroxy arylethyl radical 2e reacted by rate determining protonation in HFIP with a second-order rate constant of k(H+) = 7.8 x 10(8) M(-1) s(-1). However, in acetonitrile, 2,2,2-trifluoroethanol, and mixtures of these two solvents, 2e reacted by pre-equilibrium protonation, allowing for solvent effects on the rate constant for loss of water from the protonated radical 2e to be determined. With use of these data, substituent electronic effects on the kinetics of the beta-heterolysis reaction are discussed. Differences in the effect of solvent on the rate constant for loss of water from the protonated beta-hydroxy arylethyl radicals and other beta-substituted arylethyl radicals are also discussed.     

The Affinity of Some Lewis Bases for Hexafluoroisopropanol as a Reference Lewis Acid: An ITC/DFT Study

To figure out the possible role of 1,1,1,3,3,3-hexafluoropropan-2-ol (HFIP) as well as to provide reference thermochemical data in solution, the formation of Lewis acid-base complexes between HFIP (Lewis acid) and a series of 8 different Lewis bases (3 sulfoxides, 3 Nsp² pyridine derivatives, 1 aromatic amine, 1 cyclic aliphatic ether) was examined by isothermal titration calorimetry (ITC) experiments and static density functional theory augmented with Dispersion (DFT−D) calculations. Measured ITC association enthalpy values (ΔH_a) lie between −9.3 and −14 kcal mol⁻¹. Computations including a PCM implicit solvation model produced similar exothermicity of association of all studied systems compared to the ITC data with ΔH_a values ranging from −8.5 to −12.7 kcal mol⁻¹. An additional set of calculations combining implicit and explicit solvation by chlorobenzene of the reactants, pointed out the relatively low interference of the solvent with the HFIP-base complexation: its main effect is to slightly enhance the Gibbs energy of the HFIP-Lewis base association. It is speculated that the interactions of bulk HFIP with Lewis bases therefore may significantly intervene in catalytic processes not only via the dynamic microstructuring of the medium but also more explicitly by affecting bonds’ polarization at the Lewis bases.     

Electrospun core–sheath fibers for integrating the biocompatibility of silk fibroin and the mechanical properties of PLCL

In the process of preparing core–sheath fibers via coaxial electrospinning, the relative evaporation rates of core and sheath solvents play a key role in the formation of the core–sheath structure of the fiber. Both silk fibroin (SF) and poly(lactide‐co‐ε‐caprolactone) (PLCL) have good biocompatibility and biodegradability. SF has better cell affinity than PLCL, whereas PLCL has higher breaking strength and elongation than SF. In this work, hexafluoroisopropanol (HFIP)‐formic acid (volume ratio 8:2), HFIP and HFIP–dichloromethane (volume ratio 8:2) were used to dissolve PLCL as the core solutions, and HFIP was used to dissolve SF as the sheath solution. Then, core–sheath structured SF/PLCL (C‐SF/PLCL) fibers were prepared by coaxial electrospinning with the core and sheath solutions. Transmission electron microscopy images indicated the existence of the core–shell structure of the fibers, and energy dispersive X‐ray analysis results revealed that the fiber mat with the greatest content of core–shell structure fibers was obtained when the core solvent was HFIP–dichloromethane (volume ratio 8:2). Tensile tests showed that the C‐SF/PLCL fiber mat displayed improved tensile properties, with strength and elongation that were significantly higher than those of the pure SF mat. The C‐SF/PLCL fiber mat was further investigated as a scaffold for culturing EA.hy926 cells, and the results showed that the fiber mat permitted cellular adhesion, proliferation and spreading in a manner similar to that of the pure SF fiber mat. These results indicated that the coaxial electrospun SF/PLCL fiber mat could be considered a promising candidate for tissue engineering scaffolds for blood vessels. Copyright © 2014 John Wiley & Sons, Ltd.     

Active Molybdenum‐Based Anode for Dehydrogenative Coupling Reactions

A new and powerful active anode system that can be operated in 1,1,1,3,3,3‐hexafluoro‐2‐propanol (HFIP) has been discovered. In HFIP the molybdenum anode forms a compact, conductive, and electroactive layer of higher‐valent molybdenum species. This system can replace powerful but stoichiometrically required Mo^V reagents for the dehydrogenative coupling of aryls. This electrolytic reaction is more sustainable and allows the conversion of a broad scope of activated arenes.     

Organo‐Iodine(III)‐Catalyzed Oxidative Phenol–Arene and Phenol–Phenol Cross‐Coupling Reaction

The direct oxidative coupling reaction has been an attractive tool for environmentally benign chemistry. Reported herein is that the hypervalent iodine catalyzed oxidative metal‐free cross‐coupling reaction of phenols can be achieved using Oxone as a terminal oxidant in 1,1,1,3,3,3‐hexafluoropropan‐2‐ol (HFIP). This method features a high efficiency and regioselectivity, as well as functional‐group tolerance under very mild reaction conditions without using metal catalysts.     

Poly(vinyl chloride) stabilisation with organo-tin compounds—Part II: Catalysis of the dehydrochlorination by butyl-tin chlorides

The catalytic effect of the various butyl-tin chlorides on the dehydrochlorination reaction of chlorohexene, used as a model compound for allylic chlorides in poly(vinyl chloride), has been studied in tetrahydrofuran and dichloroethane solutions. The reaction follows an E2 mechanism, the rate determining step being the formation of a delocalised allylic carbocation. The catalytic power is directly related to the Lewis acidity of the tin chlorides and, further, RSnCl₃ is comparable with ZnCl₂, although it is more sensitive to complexing with weak Lewis bases. In the presence of poly(vinyl chloride) at 180°C, these butyl-tin chlorides show a retardation effect on dehydrochlorination, superimposed on a catalytic effect which increases with the Lewis acidity; however, in these conditions, RSnCl₃ is much less efficient than ZnCl₂ in catalysing the dehydrochlorination reaction.     

Boron(II) Cations: Interplay between Lewis‐Pair‐Acceptor and Electron‐Donor Properties

Boron(III) cations are widely used as highly Lewis acidic reagents in synthetic chemistry. In contrast, boron(II) cations are extremely rare and their chemistry almost completely unknown. They are both Lewis acids and electron donors, properties that are commonly associated with catalytically active late‐transition‐metal complexes. This double reactivity pattern ensures a rich and diverse chemistry. Herein we report the facile synthesis of several new boron(II) cations starting with a special diborane with two easily exchangeable triflate substituents. By increasing the π‐acceptor character of the neutral σ‐donor reaction partners, first reactions were developed in which the combined Lewis acidity and electron‐donor properties of boron(II) cations are applied for the reduction of organic molecules. The results of our study pave the way for applications of these unusual compounds in synthetic chemistry.     

[4+2] or [4+1] Annulation: Changing the Reaction Pathway of a Rhodium‐Catalyzed Process by Tuning the Cp Ligand

A change in reaction pathway was achieved for the first time by tuning the cyclopentadienyl (Cp) ligand used for the rhodium‐catalyzed cyclization of benzamides with conjugated enynones. Depending on the Cp ligand, the reaction pathway switched between [4+2] and [4+1] annulation. Electronic effects turned out to be crucial for the product distribution. The dichotomy was attributed to the alteration of the Lewis acidity of the resultant Cp‐bound rhodium species.     

Cage-shaped borate esters with tris(2-oxyphenyl)methane or -silane system frameworks bearing multiple tuning factors: geometric and substituent effects on their Lewis acid properties

Boron complexes that contain new tridentate ligands, tris(o‐oxyaryl)methanes and ‐silanes, were prepared. These complexes had a cage‐shaped structure around a boron center and showed higher Lewis acidity and catalytic activity than open‐shaped boron compounds. The cage‐shaped ligands determined the properties of the borates by altering the geometry and were consistently bound to the metal center by chelation. The synthesized compounds were L?B(OC₆H₄)₃CH, L?B(OC₆H₄)₃SiMe, and its derivatives (L=THF or pyridine as an external ligand). Theoretical calculations suggested that the cage‐shaped borates had a large dihedral angle (C_ipso‐O‐B‐O) compared with open‐shaped borates. The geometric effect due to the dihedral angle means that compared with open‐shaped, the cage‐shaped borates have a greater Lewis acidity. The introduction of electron‐withdrawing groups on the aryl moieties in the cage‐shaped framework increased the Lewis acidity. Substitution of a bridgehead Si for a bridgehead C decreased the Lewis acidity of the boron complexes because the large silicon atom reduces the dihedral angle of C_ipso‐O‐B‐O. The ligand‐exchange rates of the para‐fluoro‐substituted compound B(OC₆H₃F)₃CH and the ortho‐phenyl‐substituted compound B(OC₆H₃Ph)₃CH were less than that of the unsubstituted borate B(OC₆H₄)₃CH. The ligand‐exchange rate of B(OC₆H₄)₃SiMe was much faster than that of B(OC₆H₄)₃CH. A hetero Diels–Alder reaction and Mukaiyama‐type aldol reactions were more effectively catalyzed by cage‐shaped borates than by the open‐shaped borate B(OPh)₃ or by the strong Lewis acid BF₃?OEt₂. The cage‐shaped borates with the bulky substituents at the ortho‐positions selectively catalyzed the reaction with less sterically hindered substrates, while the unsubstituted borate showed no selectivity.     

In situ Crystallization Technique – an Approach to Circumvent Crystal Structures with high Z′‐Crystallization Behavior of (CF3)2C–OH

In situ crystallization on the diffractometer of 1,1,1,3,3,3‐hexafluoro‐2‐propanol (HFIP) with and without pyridine allows to obtain the new polymorphic form II of HFIP and the cocrystal HFIP‐pyridine. In contrast of the known HFIP form I, single‐crystal X‐ray diffraction analysis of HFIP form II shows a reduced number of molecules in the asymmetric unit (form I: Z′ = 8, form II: Z′ = 4) Furthermore, UNI Force Field calculations were used to gain a deeper understanding of the intermolecular potentials of the main interactions of the described crystal structures.     

Influence of the structure of polyfluorinated alcohols on Brønsted acidity/hydrogen-bond donor ability and consequences on the promoter effect

The influence of substituents on the properties of tri- and hexafluorinated alcohols derived from 2,2,2-trifluoroethanol (TFE) and 1,1,1,3,3,3-hexafluoro-2-propanol (HFIP) was examined. Measurements of specific solvent-solute interactions revealed that H-bond donation (HBD) of fluorinated alcohols is sensitive to the steric hindrance of the OH group, whereas their Br?nsted acidity is dependent only on the number of fluorine atoms. For hexafluorinated alcohols (HFAs), their association with amines characterized by X-ray diffraction showed that the balance between HBD and acidity is influenced by their structure. Moreover, the ability of HFAs to donate H-bonds is exerted in synclinal (sc), synperiplanar (sp), and also antiperiplanar (ap) conformations along the C-O bond. Comparison of the effects of fluorinated alcohols as promoting solvents in three reactions is reported. The positive correlation between rate constants and H-bonding donation ability for sulfide oxidation and imino Diels-Alder reaction brings to light the role of this property, while acidity might have a minor influence. In the third reaction, epoxide opening by piperidine, none of these properties can clearly be put forward at this stage.     

Adsorption of Carbon Dioxide on Unsaturated Metal Sites in M2(dobpdc) Frameworks with Exceptional Structural Stability and Relation between Lewis Acidity and Adsorption Enthalpy

A series of metal–organic frameworks (MOFs) M₂(dobpdc) (M=Mn, Co, Ni, Zn; H₄dobpdc=4,4′‐dihydroxy‐1,1′‐biphenyl‐3,3′‐dicarboxylic acid), with a highly dense arrangement of open metal sites along hexagonal channels were prepared by microwave‐assisted or simple solvothermal reactions. The activated materials were structurally expanded when guest molecules including CO₂ were introduced into the pores. The Lewis acidity of the open metal sites varied in the order Mn<Co<Ni>Zn, as confirmed by C=O stretching bands in the IR spectra, which are related to the CO₂ adsorption enthalpy. DFT calculations revealed that the high CO₂ binding affinity of transition‐metal‐based M₂(dobpdc) is primarily attributable to the favorable charge transfer from CO₂ (oxygen lone pair acting as a Lewis base) to the open metal sites (Lewis acid), while electrostatic effects, the underlying factor responsible for the particular order of binding strength observed across different transition metals, also play a role. The framework stability against water coincides with the order of Lewis acidity. In this series of MOFs, the structural stability of Ni₂(dobpdc) is exceptional; it endured in water vapor, liquid water, and in refluxing water for one month, and the solid remained intact on exposure to solutions of pH 2–13. The DFT calculations also support the experimental finding that Ni₂(dobpdc) has higher chemical stability than the other frameworks.     

Exploring meso-/microporous composite molecular sieves with core-shell structures

A series of core–shell‐structured composite molecular sieves comprising zeolite single crystals (i.e., ZSM‐5) as a core and ordered mesoporous silica as a shell were synthesized by means of a surfactant‐directed sol–gel process in basic medium by using cetyltrimethylammonium bromide (CTAB) as a template and tetraethylorthosilicate (TEOS) as silica precursor. Through this coating method, uniform mesoporous silica shells closely grow around the anisotropic zeolite single crystals, the shell thickness of which can easily be tuned in the range of 15–100 nm by changing the ratio of TEOS/zeolite. The obtained composite molecular sieves have compact meso‐/micropore junctions that form a hierarchical pore structure from ordered mesopore channels (2.4–3.0 nm in diameter) to zeolite micropores (≈0.51 nm). The short‐time kinetic diffusion efficiency of benzene molecules within pristine ZSM‐5 (≈7.88×10^?19 m² s^?1) is almost retainable after covering with 75 nm‐thick mesoporous silica shells (≈7.25×10^?19 m² s^?1), which reflects the greatly opened junctions between closely connected mesopores (shell) and micropores (core). The core–shell composite shows greatly enhanced adsorption capacity (≈1.35 mmol g^?1) for large molecules such as 1,3,5‐triisopropylbenzene relative to that of pristine ZSM‐5 (≈0.4 mmol g^?1) owing to the mesoporous silica shells. When Al species are introduced during the coating process, the core–shell composite molecular sieves demonstrate a graded acidity distribution from weak acidity of mesopores (predominant Lewis acid sites) to accessible strong acidity of zeolite cores (Lewis and Brønsted acid sites). The probe catalytic cracking reaction of n‐dodecane shows the superiority of the unique core–shell structure over pristine ZSM‐5. Insight into the core–shell composite structure with hierarchical pore and graded acidity distribution show great potential for petroleum catalytic processes.