A Cobalt‐Catalyzed Alkene Hydroboration with Pinacolborane

An extremely efficient cobalt catalyst for the hydroboration of both vinylarenes and aliphatic α‐olefins with pinacolborane is described, providing the anti‐Markovnikov products with excellent regio‐ and chemoselectivity, broad functional‐group tolerance, and high turnover numbers (up to 19 800). The alkene hydroboration route is further extended to a two‐step, one‐pot hydroboration and cross‐coupling of alkylboronates with aryl chlorides.     

Manganese‐Catalyzed Hydrofunctionalization of Alkenes

The manganese‐catalyzed hydrosilylation and hydroboration of alkenes has been developed using a single manganese(II) precatalyst and reaction protocol. Both reactions proceed with excellent control of regioselectivity and in high yields across a variety of sterically and electronically differentiated substrates (25 examples). Alkoxide activation, using NaO^tBu, was key to precatalyst activation and reactivity. Catalysis was achieved across various functional groups and on gram‐scale for both the developed methodologies with catalysts loadings as low as 0.5 mol %.     

Transfer Hydrocyanation of α‐ and α,β‐Substituted Styrenes Catalyzed by Boron Lewis Acids

A straightforward gram‐scale preparation of cyclohexa‐1,4‐diene‐based hydrogen cyanide (HCN) surrogates is reported. These are bench‐stable but formally release HCN and rearomatize when treated with Lewis acids. For BCl₃, the formation of the isocyanide adduct [(CN)BCl₃]^? and the corresponding Wheland complex was verified by mass spectrometry. In the presence of 1,1‐di‐ and trisubstituted alkenes, transfer of HCN from the surrogate to the C?C double bond occurs, affording highly substituted nitriles with Markovnikov selectivity. The success of this transfer hydrocyanation depends on the Lewis acid employed; catalytic amounts of BCl₃ and (C₆F₅)₂BCl are shown to be effective while B(C₆F₅)₃ and BF₃?OEt₂ are not.     

Iron‐Catalyzed Hydroboration: Unlocking Reactivity through Ligand Modulation

Iron‐catalyzed hydroboration (HB) of alkenes and alkynes is reported. A simple change in ligand structure leads to an extensive change in catalyst activity. Reactions proceed efficiently over a wide range of challenging substrates including activated, unactivated and sterically encumbered motifs. Conditions are mild and do not require the use of reducing agents or other additives. Large excesses of borating reagent are not required, allowing control of chemo‐ and regioselectivity in the presence of multiple double bonds. Mechanistic insight reveals that the reaction is likely to proceed via a highly reactive iron hydride intermediate.     

B(C6F5)3‐Catalyzed Hydrogenation of Oxime Ethers without Cleavage of the NO Bond

The hydrogenation of oximes and oxime ethers is usually hampered by N? O bond cleavage, hence affording amines rather than hydroxylamines. The boron Lewis acid B(C₆F₅)₃ is found to catalyze the chemoselective hydrogenation of oxime ethers at elevated or even room temperature under 100 bar dihydrogen pressure. The use of the triisopropylsilyl group as a protecting group allows for facile liberation of the free hydroxylamines.     

B(C6F5)3‐Catalyzed Transfer Hydrogenation of Imines and Related Heteroarenes Using Cyclohexa‐1,4‐dienes as a Dihydrogen Source

The strong boron Lewis acid tris(pentafluorophenyl)borane, B(C₆F₅)₃, is shown to abstract a hydride from suitably donor‐substituted cyclohexa‐1,4‐dienes, eventually releasing dihydrogen. This process is coupled with the FLP‐type (FLP=frustrated Lewis pair) hydrogenation of imines and nitrogen‐containing heteroarenes that are catalyzed by the same Lewis acid. The net reaction is a B(C₆F₅)₃‐catalyzed, i.e., transition‐metal‐free, transfer hydrogenation using easy‐to‐access cyclohexa‐1,4‐dienes as reducing agents. Competing reaction pathways with or without the involvement of free dihydrogen are discussed.     

B(C6F5)3-Catalyzed E-Selective Isomerization of Alkenes

Herein, we report the B(C₆F₅)₃-catalyzed E-selective isomerization of alkenes. The transition-metal-free method is applicable across a diverse array of readily accessible substrates, giving access to a broad range of synthetically useful products containing versatile stereodefined internal alkenes. The reaction mechanism was investigated by using synthetic and computational methods.     

B(C6F5)3‐Catalyzed Transfer of Dihydrogen from One Unsaturated Hydrocarbon to Another

A transition‐metal‐free transfer hydrogenation of 1,1‐disubstituted alkenes with cyclohexa‐1,4‐dienes as the formal source of dihydrogen is reported. The process is initiated by B(C₆F₅)₃‐mediated hydride abstraction from the dihydrogen surrogate, forming a Brønsted acidic Wheland complex and [HB(C₆F₅)₃]^?. A sequence of proton and hydride transfers onto the alkene substrate then yields the alkane. Although several carbenium ion intermediates are involved, competing reaction channels, such as dihydrogen release and cationic dimerization of reactants, are largely suppressed by the use of a cyclohexa‐1,4‐diene with methyl groups at the C1 and C5 as well as at the C3 position, the site of hydride abstraction. The alkene concentration is another crucial factor. The various reaction pathways were computationally analyzed, leading to a mechanistic picture that is in full agreement with the experimental observations.     

The B(C6F5)3 Boron Lewis Acid Route to Arene‐Annulated Pentalenes

4,5‐Dimethyl‐1,2‐bis(1‐naphthylethynyl)benzene ( 12 ) undergoes a rapid multiple ring‐closure reaction upon treatment with the strong boron Lewis acid B(C₆F₅)₃ to yield the multiply annulated, planar conjugated π‐system 13 (50 % yield). In the course of this reaction, a C₆F₅ group was transferred from boron to carbon. Treatment of 12 with CH₃B(C₆F₅)₂ proceeded similarly, giving a mixture of 13 (C₆F₅‐transfer) and the product 15 , which was formed by CH₃‐group transfer. 1,2‐Bis(phenylethynyl)benzene ( 8 a ) reacts similarly with CH₃B(C₆F₅)₂ to yield a mixture of the respective C₆F₅‐ and CH₃‐substituted dibenzopentalenes 10 a and 16 . The reaction is thought to proceed through zwitterionic intermediates that exhibit vinyl cation reactivities. Some B(C₆F₅)₃‐substituted species ( 26 , 27 ) consequently formed by in situ deprotonation upon treatment of the respective 1,2‐bis(alkynyl)benzene starting materials ( 24 , 8 ) with the frustrated Lewis pair B(C₆F₅)₃/P(o‐tolyl)₃. The overall formation of the C₆F₅‐substituted products formally require HB(C₆F₅)₂ cleavage in an intermediate dehydroboration step. This was confirmed in the reaction of a thienylethynyl‐containing starting material 21 with B(C₆F₅)₃, which gave the respective annulated pentalene product 23 that had the HB(C₆F₅)₂ moiety 1,4‐added to its thiophene ring. Compounds 12 – 14 , 23 , and 26 were characterized by X‐ray diffraction.     

Extending the Scope of the B(C6F5)3‐Catalyzed CN Bond Reduction: Hydrogenation of Oxime Ethers and Hydrazones

The B(C₆F₅)₃‐catalyzed hydrogenation is applied to aldoxime triisopropylsilyl ethers and hydrazones bearing an easily removable phthaloyl protective group. The C?N reduction of aldehyde‐derived substrates (oxime ethers and hydrazones) is enabled by using 1,4‐dioxane as the solvent known to participate as the Lewis‐basic component in FLP‐type heterolytic dihydrogen splitting. More basic ketone‐derived hydrazones act as Lewis bases themselves in the FLP‐type dihydrogen activation and are therefore successfully hydrogenated in nondonating toluene. The difference in reactivity between aldehyde‐ and ketone‐derived substrates is also reflected in the required catalyst loading and dihydrogen pressure.     

Enantioselective Nazarov Cyclizations Catalyzed by an Axial Chiral C6F5‐Substituted Boron Lewis Acid

A chiral variant of B(C₆F₅)₃ with a 3,3′‐disubstituted binaphthyl backbone is shown to catalyze Nazarov cyclizations with high levels of enantio‐ and diastereocontrol. The parent B(C₆F₅)₃ also promotes these ring closures efficiently. This electrocyclization is another example of the still small family of C?C bond formations mediated by B(C₆F₅)₃ as the catalyst.     

Highly Selective Hydroboration of Alkenes,Ketones and Aldehydes Catalyzed by a Well‐Defined Manganese Complex

Well‐defined manganese complexes based on inexpensive, readily available ligands, 2,2′:6′,2′′‐terpyridine and its derivatives have been prepared and employed for the selective hydroboration of alkenes, ketones and aldehydes. Highly Markovnikov regioselective hydroboration of styrenes as well as excellent chemoselective hydroboration of ketones over alkenes were achieved, for the first time, by an earth‐abundant manganese catalyst.     

Synthesis and Structure of an Extremely Air‐Stable Binuclear Hafnocene Perfluorooctanesulfonate Complex and Its Use in Lewis Acid‐Catalyzed Reactions

Stable complexes : An extremely air‐stable μ²‐hydroxy‐bridged binuclear hafonocene perfluorooctanesulfoante complex shows high catalytic efficiency in Lewis acid‐catalyzed reactions, such as esterification, Friedel–Crafts acylation, the Mukaiyama aldol reation, and the allylation of aldehyde (see scheme).

     

Stoichiometric and Catalytic C−C and C−H Bond Formation with B(C6F5)3 via Cationic Intermediates

This work showcases a new catalytic cyclization reaction using a highly Lewis acidic borane with concomitant C−H or C−C bond formation. The activation of alkyne‐containing substrates with B(C₆F₅)₃ enabled the first catalytic intramolecular cyclizations of carboxylic acid substrates using this Lewis acid. In addition, intramolecular cyclizations of esters enable C−C bond formation as catalytic B(C₆F₅)₃ can be used to effect formal 1,5‐alkyl migrations from the ester functional groups to unsaturated carbon–carbon frameworks. This metal‐free method was used for the catalytic formation of complex dihydropyrones and isocoumarins in very good yields under relatively mild conditions with excellent atom efficiency.     

Tuning the Lewis Acidity of Boranes in Frustrated Lewis Pair Chemistry: Implications for the Hydrogenation of Electron‐Poor Alkenes

An analysis of the metal‐free reduction of electron deficient olefins by frustrated Lewis pairs indicates that the rate‐determining step might be either the heterolytic cleavage of H₂ to form an ‐onium borohydride salt, or the subsequent transfer of the hydride moiety to the substrate following a Michael‐type addition reaction. While the use of strong Lewis acids such as B(C₆F₅)₃ facilitates the first of these processes, hydride transfer to the olefin should be contrarily favoured by the use of weak Lewis acids which, for this very same reason, might be unable to promote the prior H₂ split. After systematic testing of several boranes of different Lewis acidity (assessed by using the Childs’ method) and steric demand, an optimal situation that employs tris(2,4,6‐trifluorophenyl)borane was reached. Mixtures of this borane with 1,4‐diazabicyclo[2.2.2]octane (DABCO) exhibited excellent catalytic activity for the hydrogenation of alkylidene malonates. In fact, this transformation could be achieved under milder conditions than those we reported previously. Moreover, the reaction scope could be expanded to other electron deficient olefins containing esters, sulfones or nitro functionalities as electron‐withdrawing substituents.     

Reaction of a 6-dimethylaminopentafulvene with the Mes2PCH2CH2B(C6F5)2 frustrated Lewis pair

The frustrated Lewis pair Mes(2)PCH(2)CH(2)B(C(6)F(5))(2) reacts readily with 6-dimethylamino-6-methylfulvene at room temperature to yield the trans-1-[B(C(6)F(5))(2)]-2-[CH(2)CH(2)PMes(2)] disubstituted fulvene derivative 9 that features an internal N-B contact. Thermolysis (80 °C in toluene) results in a complete isomerization to the respective 1-[B(C(6)F(5))(2)]-3-[CH(2)CH(2)PMes(2)] isomer 10. Both compounds were characterized by using X-ray diffraction. A reaction scheme is formulated to rationalize the specific formation of these compounds, involving a retro-hydroboration/hydroboration sequence. The reaction of the 6-dimethylaminofulvene with HB(C(6)F(5))(2) yielded the corresponding parent compound 13 that was also characterized by X-ray diffraction.