Homochiral MOF–Polymer Mixed Matrix Membranes for Efficient Separation of Chiral Molecules

Homochiral metal–organic framework (MOF) membranes have been recently reported for chiral separations. However, only a few high‐quality homochiral polycrystalline MOF membranes have been fabricated due to the difficulty in crystallization of a chiral MOF layer without defects on porous substrates. Alternatively, mixed matrix membranes (MMMs), which combine potential advantages of MOFs and polymers, have been widely demonstrated for gas separation and water purification. Here we report novel homochiral MOF–polymer MMMs for efficient chiral separation. Homochirality was successfully incorporated into achiral MIL‐53‐NH₂ nanocrystals by post‐synthetic modification with amino acids, such as l ‐histidine (l ‐His) and l ‐glutamic acid (l ‐Glu). The MIL‐53‐NH‐l ‐His and MIL‐53‐NH‐l ‐Glu nanocrystals were then embedded into polyethersulfone (PES) matrix to form homochiral MMMs, which exhibited excellent enantioselectivity for racemic 1‐phenylethanol with the highest enantiomeric excess value up to 100 %. This work, as an example, demonstrates the feasibility of fabricating diverse large‐scale homochiral MOF‐based MMMs for chiral separation.     

A Designed Three‐Stranded β‐Sheet in an α/β Hybrid Peptide

The incorporation of β‐amino acid residues into the antiparallel β‐strand segments of a multi‐stranded β‐sheet peptide is demonstrated for a 19‐residue peptide, Boc‐LV^βFV^DPGL^βFVVL^DPGLVL^βFVV‐OMe (BBH19). Two centrally positioned ^DPro–Gly segments facilitate formation of a stable three‐stranded β‐sheet, in which β‐phenylalanine (^βPhe) residues occur at facing positions 3, 8 and 17. Structure determination in methanol solution is accomplished by using NMR‐derived restraints obtained from NOEs, temperature dependence of amide NH chemical shifts, rates of H/D exchange of amide protons and vicinal coupling constants. The data are consistent with a conformationally well‐defined three‐stranded β‐sheet structure in solution. Cross‐strand interactions between ^βPhe3/^βPhe17 and ^βPhe3/Val15 residues define orientations of these side‐chains. The observation of close contact distances between the side‐chains on the N‐ and C‐terminal strands of the three‐stranded β‐sheet provides strong support for the designed structure. Evidence is presented for multiple side‐chain conformations from an analysis of NOE data. An unusual observation of the disappearance of the Gly NH resonances upon prolonged storage in methanol is rationalised on the basis of a slow aggregation step, resulting in stacking of three‐stranded β‐sheet structures, which in turn influences the conformational interconversion between type I′ and type II′ β‐turns at the two ^DPro–Gly segments. Experimental evidence for these processes is presented. The decapeptide fragment Boc‐LV^βFV^DPGL^βFVV‐OMe (BBH10), which has been previously characterized as a type I′ β‐turn nucleated hairpin, is shown to favour a type II′ β‐turn conformation in solution, supporting the occurrence of conformational interconversion at the turn segments in these hairpin and sheet structures.     

β‐Hairpins Generated from Hybrid Peptide Sequences Containing both α‐ and β‐Amino Acids

The incorporation of the β‐amino acid residues into specific positions in the strands and β‐turn segments of peptide hairpins is being systematically explored. The presence of an additional torsion variable about the C(α) C(β) bond (θ) enhances the conformational repertoire in β‐residues. The conformational analysis of three designed peptide hairpins composed of α/β‐hybrid segments is described: Boc‐Leu‐Val‐Val‐^DPro‐β Phe ‐Leu‐Val‐Val‐OMe ( 1 ), Boc‐Leu‐Val‐β Val ‐^DPro‐Gly‐β Leu ‐Val‐Val‐OMe ( 2 ), and Boc‐Leu‐Val‐β Phe ‐Val‐^DPro‐Gly‐Leu‐β Phe ‐Val‐Val‐OMe ( 3 ). 500‐MHz ¹H‐NMR Analysis supports a preponderance of β‐hairpin conformation in solution for all three peptides, with critical cross‐strand NOEs providing evidence for the proposed structures. The crystal structure of peptide 2 reveals a β‐hairpin conformation with two β‐residues occupying facing, non‐H‐bonded positions in antiparallel β‐strands. Notably, βVal(3) adopts a gauche conformation about the C(α) C(β) bond (θ=+65°) without disturbing cross‐strand H‐bonding. The crystal structure of 2 , together with previously published crystal structures of peptides 3 and Boc‐β Phe ‐β Phe ‐^DPro‐Gly‐β Phe ‐β Phe ‐OMe, provide an opportunity to visualize the packing of peptide sheets with local ‘polar segments' formed as a consequence of reversal peptide‐bond orientation. The available structural evidence for hairpins suggests that β‐residues can be accommodated into nucleating turn segments and into both the H‐bonding and non‐H‐bonding positions on the strands.     

The Propensity of α‐Aminoisobutyric Acid (=2‐Methylalanine; Aib) to Induce Helical Secondary Structure in an α‐Heptapeptide: A Computational Study

We present a molecular‐dynamics simulation study of an α‐heptapeptide containing an α‐aminoisobutyric acid (=2‐methylalanine; Aib) residue, Val¹‐Ala²‐Leu³‐Aib⁴‐Ile⁵‐Met⁶‐Phe⁷, and a quantum‐mechanical (QM) study of simplified models to investigate the propensity of the Aib residue to induce 3₁₀/α‐helical conformation. For comparison, we have also performed simulations of three analogues of the peptide with the Aib residue being replaced by L ‐Ala, D ‐Ala, and Gly, respectively, which provide information on the subtitution effect at C(α) (two Me groups for Aib, one for L ‐Ala and D ‐Ala, and zero for Gly). Our simulations suggest that, in MeOH, the heptapeptide hardly folds into canonical helical conformations, but appears to populate multiple conformations, i.e., C₇ and 3₁₀‐helical ones, which is in agreement with results from the QM calculations and NMR experiments. The populations of these conformations depend on the polarity of the solvent. Our study confirms that a short peptide, though with the presence of an Aib residue in the middle of the chain, does not have to fold to an α‐helical secondary structure. To generate a helical conformation for a linear peptide, several Aib residues should be present in the peptide, either sequentially or alternatively, to enhance the propensity of Aib‐containing peptides towards the helical conformation. A correction of a few of the published NMR data is reported.     

Incorporation of N‐Methyl‐d‐glucamine Functionalized Oligomer into MIL‐101(Cr) for Highly Efficient Removal of Boric Acid from Water

Polymeric resins are practically important adsorbents in a wide variety of applications, but they generally suffer from low surface areas and limited functionalized adsorption sites owing to their closely compacted and tangled polymeric chains. A metal–organic framework (MOF)–polymer composite with enhanced adsorption capacity against the compacted polymeric resins was reported. The strategy to incorporate functionalized oligomer within the cavities of the MOF was demonstrated by the preparation of MIL‐101(Cr) incorporated with N‐methyl‐d ‐glucamine‐based organosiloxane polymer. The resulting MOF composite shows high efficiency for the removal of boric acid from water because of exceptionally high loading of functional groups responsible for the boron adsorption. This material offers promising perspectives for boron removal applications in seawater desalination.     

Hierarchical Organization of Ferrocene–Peptides

Hierarchical self‐assembly of disubstituted ferrocene (Fc)–peptide conjugates that possess Gly‐Val‐Phe and Gly‐Val‐Phe‐Phe peptide substituents leads to the formation of nano‐ and micro‐sized assemblies. Hydrogen‐bonding and hydrophobic interactions provide directionality to the assembly patterns. The self‐assembling behavior of these compounds was studied in solution by using ¹H NMR and circular dichroism (CD) spectroscopies. In the solid state, attenuated total reflectance (ATR) FTIR spectroscopy, single‐crystal X‐ray diffraction (XRD), powder X‐ray diffraction (PXRD), and scanning electron microscopy (SEM) methods were used. Spontaneous self‐assembly of Fc–peptides through intra‐ and intermolecular hydrogen‐bonding interactions induces supramolecular assemblies, which further associate and give rise to fibers, large fibrous crystals, and twisted ropes. In the case of Fc[CO‐Gly‐Val‐Phe‐OMe]₂ ( 1 ), molecules initially interact to form pleated sheets that undergo association into long fibers that form bundles and rectangular crystalline cuboids. Molecular offsets and defects, such as screw dislocations and solvent effects that occur during crystal growth, induce the formation of helical arrangements, ultimately leading to large twisted ropes. By contrast, the Fc–tetrapeptide conjugate Fc[CO‐Gly‐Val‐Phe‐Phe‐OMe]₂ ( 2 ) forms a network of nanofibers at the supramolecular level, presumably due to the additional hydrogen‐bonding and hydrophobic interactions that stem from the additional Phe residues.     

Synthesis of Aib‐ and Phe(2Me)‐Containing Cyclopentapeptides

Some recently described pentapeptides containing the α,α‐disubstituted α‐amino acids Aib and Phe(2Me) have been cyclized in DMF solution using diphenyl phosphorazidate (DPPA), O‐(1H‐benzotriazol‐1‐yl)‐N,N,N′,N′‐tetamethyluronium tetrafluoroborate/1‐hydroxybenzotriazole (TBTU/HOBt), and diethyl phosphorocyanidate (DEPC), respectively, to give the corresponding cyclopentapeptides in fair‐to‐good yields. In the case of peptides with L ‐amino acids, and (R)‐ and (S)‐Phe(2Me), the yields differed significantly in favor of the L /(R) combination. The conformations in the crystals of cyclo(Gly‐Aib‐(R,S)‐Phe(2Me)‐Aib‐Gly) and cyclo(Gly‐(R)‐Phe(2Me)‐Pro‐Aib‐Gly) have been determined by X‐ray crystallography, leading to quite different results. In the latter case, the conformation in solution has been elucidated by NMR studies.     

Enhancing the Water Stability of Al‐MIL‐101‐NH2 via Postsynthetic Modification

The resistance of metal–organic frameworks towards water is a very critical issue concerning their practical use. Recently, it was shown for microporous MOFs that the water stability could be increased by introducing hydrophobic pendant groups. Here, we demonstrate a remarkable stabilisation of the mesoporous MOF Al‐MIL‐101‐NH₂ by postsynthetic modification with phenyl isocyanate. In this process 86 % of the amino groups were converted into phenylurea units. As a consequence, the long‐term stability of Al‐MIL‐101‐URPh in liquid water could be extended beyond a week. In water saturated atmospheres Al‐MIL‐101‐URPh decomposed at least 12‐times slower than the unfunctionalised analogue. To study the underlying processes both materials were characterised by Ar, N₂ and H₂O sorption measurements, powder X‐ray diffraction, thermogravimetric and chemical analysis as well as solid‐state NMR and IR spectroscopy. Postsynthetic modification decreased the BET equivalent surface area from 3363 to 1555 m² g^?1 for Al‐MIL‐101‐URPh and reduced the mean diameters of the mesopores by 0.6 nm without degrading the structure significantly and reducing thermal stability. In spite of similar water uptake capacities, the relative humidity‐dependent uptake of Al‐MIL‐101‐URPh is slowed and occurs at higher relative humidity values. In combination with ¹H‐²⁷Al D ‐HMQC NMR spectroscopy experiments this favours a shielding mechanism of the Al clusters by the pendant phenyl groups and rules out pore blocking.     

A Metal–Organic Framework Containing Unusual Eight‐Connected Zr–Oxo Secondary Building Units and Orthogonal Carboxylic Acids for Ultra‐sensitive Metal Detection

Two metal–organic frameworks (MOFs) with Zr–oxo secondary building units (SBUs) were prepared by using p,p′‐terphenyldicarboxylate (TPDC) bridging ligands pre‐functionalized with orthogonal succinic acid (MOF‐ 1 ) and maleic acid groups (MOF‐ 2 ). Single‐crystal X‐ray structure analysis of MOF‐ 1 provides the first direct evidence for eight‐connected SBUs in UiO‐type MOFs. In contrast, MOF‐ 2 contains twelve‐connected SBUs as seen in the traditional UiO MOF topology. These structural assignments were confirmed by extended X‐ray absorption fine structure (EXAFS) analysis. The highly porous MOF‐ 1 is an excellent fluorescence sensor for metal ions with the detection limit of <0.5 ppb for Mn²⁺and three to four orders of magnitude greater sensitivity for metal ions than previously reported luminescent MOFs.     

Probing the Structural Stability of and Enhanced CO2 Storage in MOF MIL‐68(In) under High Pressures by FTIR Spectroscopy

The unique structural topology of metal–organic framework (MOF) MIL‐68, featuring two types of channels with distinct pore sizes, makes it a promising candidate for application in gas storage and separation. In this study, the behavior of as‐made and activated MIL‐68(In) was investigated in a diamond‐anvil cell under high pressure by in situ IR spectroscopy. The framework exhibits high stability under compression up to 9 GPa, whereas the bridging OH groups appear to be very sensitive to compression. Pressure‐induced structural modifications were found to be completely reversible for as‐made MIL‐68(In) but irreversible for the activated framework. Moreover, the addition of Nujol as pressure‐transmitting medium makes the framework more resilient to pressure. Finally, when loaded with CO₂, the framework exhibited interesting differential binding affinities with CO₂ in the hexagonal and triangular pores at different pressures. The pressure‐enhanced CO₂ storage behavior and the guest–host interaction mechanism between CO₂ and the MOF framework were explored with the aid of Monte Carlo simulations. These studies demonstrated great potential for MIL‐68(In) in gas‐storage applications that require extreme loading pressures.     

Synthesis,and Helix or Hairpin‐Turn Secondary Structures of ‘Mixed’ α/β‐Peptides Consisting of Residues with Proteinogenic Side Chains and of 2‐Amino‐2‐methylpropanoic Acid (Aib)

Twelve peptides, 1 – 12 , have been synthesized, which consist of alternating sequences of α‐ and β‐amino acid residues carrying either proteinogenic side chains or geminal dimethyl groups (Aib). Two peptides, 13 and 14 , containing 2‐methyl‐3‐aminobutanoic acid residues or a ‘random mix’ of α‐, β²‐, and β³‐amino acid moieties were also prepared. The new compounds were fully characterized by CD (Figs. 1 and 2), and ¹H‐ and ¹³C‐NMR spectroscopy, and high‐resolution mass spectrometry (HR‐MS). In two cases, 3 and 14 , we discovered novel types of turn structures with nine‐ and ten‐membered H‐bonded rings forming the actual turns. In two other cases, 8 and 11 , we found 14/15‐helices, which had been previously disclosed in mixed α/β‐peptides containing unusual β‐amino acids with non‐proteinogenic side chains. The helices are formed by peptides containing the amino acid moiety Aib in every other position, and their backbones are primarily not held together by H‐bonds, but by the intrinsic conformations of the containing amino acid building blocks. The structures offer new possibilities of mimicking peptide–protein and protein–protein interactions (PPI).     

A New Benzotriazole‐Mediated Stereoflexible Gateway to Hetero‐2,5‐diketopiperazines

Open chain Cbz‐L ‐aa¹‐L ‐Pro‐Bt (Bt=benzotriazole) sequences were converted into either the corresponding trans‐ or cis‐fused 2,5‐diketopiperazines (DKPs) depending on the reaction conditions. Thermodynamic tandem cyclization/epimerization afforded selectively the corresponding trans‐DKPs (69–75 %). Complementarily, tandem deprotection/cyclization led to the cis‐DKPs (65–72 %). A representative set of proline‐containing cis‐ and trans‐DKPs has been prepared. A mechanistic investigation, based on chiral HPLC, kinetics, and computational studies enabled a rationalization of the results.     

The Design of α/β‐Peptides: Study on Three‐Residue Turn Motifs and the Influence of Achiral Glycine on Helix and Turn

Novel three‐residue helix‐turn secondary structures, nucleated by a helix at the N terminus, were generated in peptides that have ‘β‐Caa‐L ‐Ala‐L ‐Ala,’ ‘β‐Caa‐L ‐Ala‐γ‐Caa,’ and ‘β‐Caa‐L ‐Ala‐δ‐Caa’ (in which β‐Caa is C‐linked carbo‐β‐amino acid, γ‐Caa is C‐linked carbo‐γ‐amino acid, and δ‐Caa is C‐linked carbo‐δ‐amino acid) at the C terminus. These turn structures are stabilized by 12‐, 14‐, and 15‐membered (mr) hydrogen bonding between NH(i)/CO(i+2) (i+2 is the last residue in the peptide) along with a 7‐mr hydrogen bond between CO(i)/NH(i+2). In addition, a series of α/β‐peptides were designed and synthesized with alternating glycine (Gly) and (S)‐β‐Caa to study the influence of an achiral α‐residue on the helix and helix‐turn structures. In contrast to previous results, the three ‘β–α–β’ residues at the C terminus (α‐residue being Gly) are stabilized by only a 13‐mr forward hydrogen bond, which resembles an α‐turn. Extensive NMR spectroscopic and molecular dynamics (MD) studies were performed to support these observations. The influence of chirality and side chain is also discussed.     

Differentiation of Boc‐protected α,δ‐/δ,α‐ and β,δ‐/δ,β‐hybrid peptide positional isomers by electrospray ionization tandem mass spectrometry

Two new series of Boc‐N‐α,δ‐/δ,α‐ and β,δ‐/δ,β‐hybrid peptides containing repeats of L ‐Ala‐δ⁵‐Caa/δ⁵‐Caa‐L ‐Ala and β³‐Caa‐δ⁵‐Caa/δ⁵‐Caa‐β³‐Caa (L ‐Ala = L ‐alanine, Caa = C‐linked carbo amino acid derived from D ‐xylose) have been differentiated by both positive and negative ion electrospray ionization (ESI) ion trap tandem mass spectrometry (MS/MS). MSⁿ spectra of protonated isomeric peptides produce characteristic fragmentation involving the peptide backbone, the Boc‐group, and the side chain. The dipeptide positional isomers are differentiated by the collision‐induced dissociation (CID) of the protonated peptides. The loss of 2‐methylprop‐1‐ene is more pronounced for Boc‐NH‐L ‐Ala‐δ‐Caa‐OCH₃ (1), whereas it is totally absent for its positional isomer Boc‐NH‐δ‐Caa‐L ‐Ala‐OCH₃ (7), instead it shows significant loss of t‐butanol. On the other hand, second isomeric pair shows significant loss of t‐butanol and loss of acetone for Boc‐NH‐δ‐Caa‐β‐Caa‐OCH₃ (18), whereas these are insignificant for its positional isomer Boc‐NH‐β‐Caa‐δ‐Caa‐OCH₃ (13). The tetra‐ and hexapeptide positional isomers also show significant differences in MS² and MS³ CID spectra. It is observed that ‘b’ ions are abundant when oxazolone structures are formed through five‐membered cyclic transition state and cyclization process for larger ‘b’ ions led to its insignificant abundance. However, b₁⁺ ion is formed in case of δ,α‐dipeptide that may have a six‐membered substituted piperidone ion structure. Furthermore, ESI negative ion MS/MS has also been found to be useful for differentiating these isomeric peptide acids. Thus, the results of MS/MS of pairs of di‐, tetra‐, and hexapeptide positional isomers provide peptide sequencing information and distinguish the positional isomers. Copyright © 2010 John Wiley & Sons, Ltd.     

Synthesis of chromene derivatives in the presence of mordenite zeolite/MIL‐101 (Cr) metal–organic framework composite as catalyst

In the present study, the synthesis of mordenite zeolite/MIL‐101(Cr) metal–organic framework (MOF) composite [MOR/MIL‐101(Cr)] using the ship in a bottle method was suggested. The properties of prepared composite and individual MOF and MOR zeolite were characterized by X‐ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), nitrogen adsorption–desorption measurement, and thermogravimetric analysis (TGA). The XRD results indicated diffraction peaks for each compound (MOR and MOF) in composite. The SEM and TEM images showed the formation of plates MOR (with size of 2.5 × 3 μm) along with spherical particles MIL‐101. The Brunauer–Emmett–Teller results showed that the surface area of the composite was smaller than individual MOF and MOR zeolite. Based on TGA plots, the hybrid zeolite/MOF composite was more thermally stable compared with the isolated MIL‐101(Cr). The composite was functionalized by post‐synthetic modification to obtain acid–base bifunctionality (H‐MOR/MIL‐101‐ED) for the synthesis of chromene derivatives. The acidity from framework Al‐O(H)‐Si sites in MOR and basicity from amine groups in MIL‐101 were obtained by post‐synthetic modification.     

Near–Infrared‐Responsive Peptide that Targets Collagen Fibrils to Induce Cytotoxicity

A novel conjugate, PHG10 dye, was synthesized using a collagen peptide and a near–infrared (NIR)‐responsive dye to achieve targeted cytotoxicity. The collagen peptide motif, ‐(Pro‐Hyp‐Gly)₁₀‐ (PHG10), was incorporated for targeting collagen fibrils that are excessively produced by activated fibroblasts around tumor cells. PHG10 dye was purified by HPLC and identified by MALDI‐MS. The phototoxicity and cytotoxicity of PHG10 dye were examined using human glioma cells (HGCs). Fluorescent images indicated that PHG10 dye preferably assembled to collagen‐coated HGCs compared with noncoated HGCs. Under irradiation with NIR light, effective cytotoxicity was observed on collagen‐coated HGCs within 20 min. Because phototoxicity and cytotoxicity are dependent on the assembled amount of PHG10 dye, the targeting of collagen fibrils by the collagen peptide motif PHG10 is assured.     

Thermosensitive gel formation of novel polypeptides containing a collagen‐derived Pro‐Hyp‐Gly sequence and an elastin‐derived Val‐Pro‐Gly‐Val‐Gly sequence

A triple‐helix‐forming collagen model peptide, (prolyl‐trans‐4‐hydroxyprolyl‐glycyl)₁₀ [(Pro‐Hyp‐Gly)₁₀], and a thermosensitive elastin‐derived pentapeptide, valyl‐prolyl‐glycyl‐valyl‐glycyl (Val‐Pro‐Gly‐Val‐Gly), were copolymerized in various mole ratios using 1‐ethyl‐3‐(3‐dimethylaminopropyl)‐carbodiimide hydrochloride and 1‐hydroxybenzotriazole in dimethyl sulfoxide at 20 °C. All of the obtained polypeptides have molecular weight higher than 10³ and contain a triple‐helical structure, and showed an inverse phase transition from transparent solution to turbid suspension in response to a rise in temperature. The lower critical solution temperature of the polypeptide solution decreased upon increasing the content of Val‐Pro‐Gly‐Val‐Gly. Furthermore, polypeptides containing 82–86 mol % of Val‐Pro‐Gly‐Val‐Gly in composition showed reversible gel formation, suggesting that (Pro‐Hyp‐Gly)₁₀ acts as a hydrated unit and Val‐Pro‐Gly‐Val‐Gly acts as a thermosensitive crosslinking point. These biodegradable thermosensitive polypeptides may be useful for biomedical applications, including, as a scaffold for tissue regeneration. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6048–6056, 2005     

Formation of a Single‐Crystal Aluminum‐Based MOF Nanowire with Graphene Oxide Nanoscrolls as Structure‐Directing Agents

An innovative strategy is proposed to synthesize single‐crystal nanowires (NWs) of the Al³⁺ dicarboxylate MIL‐69(Al) MOF by using graphene oxide nanoscrolls as structure‐directing agents. MIL‐69(Al) NWs with an average diameter of 70±20 nm and lengths up to 2 μm were found to preferentially grow along the [001] crystallographic direction. Advanced characterization methods (electron diffraction, TEM, STEM‐HAADF, SEM, XPS) and molecular modeling revealed the mechanism of formation of MIL‐69(Al) NWs involving size‐confinement and templating effects. The formation of MIL‐69(Al) seeds and the self‐scroll of GO sheets followed by the anisotropic growth of MIL‐69(Al) crystals are mediated by specific GO sheets/MOF interactions. This study delivers an unprecedented approach to control the design of 1D MOF nanostructures and superstructures.     

Influence of Sequential Modifications and Carbohydrate Variations in Synthetic AFGP Analogues on Conformation and Antifreeze Activity

Certain Arctic and Antarctic ectotherm species have developed strategies for survival under low temperature conditions that, among others, consist of antifreeze glycopeptides (AFGP). AFGP form a class of biological antifreeze agents that exhibit the ability to inhibit ice growth in vitro and in vivo and, hence, enable life at temperatures below the freezing point. AFGP usually consist of a varying number of (Ala‐Ala‐Thr)_n units (n=4–55) with the disaccharide β‐D ‐galactosyl‐(1→3)‐α‐N‐acetyl‐D ‐galactosamine glycosidically attached to every threonine side chain hydroxyl group. AFGP have been shown to adopt polyproline II helical conformation. Although this pattern is highly conserved among different species, microheterogeneity concerning the amino acid composition usually occurs; for example, alanine is occasionally replaced by proline in smaller AFGP. The influence of minor and major sequence mutations on conformation and antifreeze activity of AFGP analogues was investigated by replacement of alanine by proline and glycosylated threonine by glycosylated hydroxyproline. The target compounds were prepared by using microwave‐enhanced solid phase peptide synthesis. Furthermore, artificial analogues were obtained by copper‐catalyzed azide–alkyne cycloaddition (CuAAC): propargyl glycosides were treated with polyproline helix II‐forming peptides comprising (Pro‐Azp‐Pro)_n units (n=2–4) that contained 4‐azidoproline (Azp). The conformations of all analogues were examined by circular dichroism (CD). In addition, microphysical analysis was performed to provide information on their inhibitory effect on ice recrystallization.