Diversity in Gold‐Catalyzed Formal Cycloadditions of Ynamides with Azidoalkenes or 2H‐Azirines: [3+2] versus [4+3] Cycloadditions

Gold‐catalyzed cycloadditions of ynamides with azidoalkenes or 2H‐azirines give [3+2] or [4+3] formal cycloadducts of three classes. Cycloadditions of ynamides with 2H‐azirine species afford pyrrole products with two regioselectivities when the C_β‐substituted 2H‐azirine is replaced from an alkyl (or hydrogen) with an ester group. For ynamides substituted with an electron‐rich phenyl group, their reactions with azidoalkenes proceed through novel [4+3] cycloadditions to deliver 1H‐benzo[d]azepine products instead.     

On the Mechanism of Copper(I)‐Catalyzed Azide–Alkyne Cycloaddition

The copper(I)‐catalyzed azide–alkyne cycloaddition (CuAAC) reaction regiospecifically produces 1,4‐disubstituted‐1,2,3‐triazole molecules. This heterocycle formation chemistry has high tolerance to reaction conditions and substrate structures. Therefore, it has been practiced not only within, but also far beyond the area of heterocyclic chemistry. Herein, the mechanistic understanding of CuAAC is summarized, with a particular emphasis on the significance of copper/azide interactions. Our analysis concludes that the formation of the azide/copper(I) acetylide complex in the early stage of the reaction dictates the reaction rate. The subsequent triazole ring‐formation step is fast and consequently possibly kinetically invisible. Therefore, structures of substrates and copper catalysts, as well as other reaction variables that are conducive to the formation of the copper/alkyne/azide ternary complex predisposed for cycloaddition would result in highly efficient CuAAC reactions. Specifically, terminal alkynes with relatively low pK_a values and an inclination to engage in π‐backbonding with copper(I), azides with ancillary copper‐binding ligands (aka chelating azides), and copper catalysts that resist aggregation, balance redox activity with Lewis acidity, and allow for dinuclear cooperative catalysis are favored in CuAAC reactions. Brief discussions on the mechanistic aspects of internal alkyne‐involved CuAAC reactions are also included, based on the relatively limited data that are available at this point.     

Strain‐Promoted Azide–Alkyne Cycloaddition with Ruthenium(II)–Azido Complexes

The reactivity of an exemplary ruthenium(II)–azido complex towards non‐activated, electron‐deficient, and towards strain‐activated alkynes at room temperature and low millimolar azide and alkyne concentrations has been investigated. Non‐activated terminal and internal alkynes failed to react under such conditions, even under copper(I) catalysis conditions. In contrast, as expected, rapid cycloaddition was observed with electron‐deficient dimethyl acetylenedicarboxylate (DMAD) as the dipolarophile. Since DMAD and related propargylic esters are excellent Michael acceptors and thus unsuitable for biological applications, we investigated the reactivity of the azido complex towards cycloaddition with derivatives of cyclooctyne (OCT), bicyclo[6.1.0]non‐4‐yne (BCN), and azadibenzocyclooctyne (ADIBO). While no reaction could be observed in the case of the less strained cyclooctyne OCT, the highly strained cyclooctynes BCN and ADIBO readily reacted with the azido complex, providing the corresponding stable triazolato complexes, which were amenable to purification by conventional silica gel column chromatography. An X‐ray crystal structure of an ADIBO cycloadduct was obtained and verified that the formed 1,2,3‐triazolato ligand coordinates the metal center through the central N2 atom. Importantly, the determined second‐order rate constant for the ADIBO cycloaddition with the azido complex (k₂=6.9 × 10^?2 M ^?1 s^?1) is comparable to the rate determined for the ADIBO cycloaddition with organic benzyl azide (k₂=4.0 × 10^?1 M ^?1 s^?1). Our results demonstrate that it is possible to transfer the concept of strain‐promoted azide–alkyne cycloaddition (SPAAC) from purely organic azides to metal‐coordinated azido ligands. The favorable reaction kinetics for the ADIBO‐azido‐ligand cycloaddition and the well‐proven bioorthogonality of strain‐activated alkynes should pave the way for applications in living biological systems.     

Organocatalytic Enantioselective Higher‐Order Cycloadditions of In Situ Generated Amino Isobenzofulvenes

The [8+2] cycloaddition of indene‐2‐carbaldehydes and nitro olefins is described to provide benzonorbornene scaffolds in a highly peri‐, diastereo‐, and enantioselective fashion in the presence of a C₂‐symmetric aminocatalyst. This reaction, which proceeds through a transient semi‐aromatic amino isobenzofulvene, represents the first example of catalytic formation and transformation of these species. Quantum chemical calculations suggest a kinetically controlled stepwise mechanism where the stereochemistry is determined in the first bond‐forming event. Beyond the useful [8+2] cycloadducts, [10+4] cycloadducts have been identified in silico as potential off‐pathway intermediates.     

Hydroxy‐Directed Ruthenium‐Catalyzed Alkene/Alkyne Coupling: Increased Scope,Stereochemical Implications,and Mechanistic Rationale

The recognition of the dual binding mode of propargyl and allyl alcohols to [Cp*Ru] fragments fostered the development of a highly regioselective intermolecular Alder‐ene‐type reaction of alkynes with 1,2‐disubstituted alkenes. The increased substrate scope opens new perspectives in stereochemical terms. As the loaded catalyst is chiral‐at‐metal, stereochemical information is efficiently relayed from the propargylic site to the emerging C−C bond. This interpretation is based on the X‐ray structure of the first Cp*Ru complex carrying an intact enyne ligand, and provides valuable insights into bonding and activation of the substrates. Computational data draw a clear picture of the principles governing regio‐ and stereocontrol.     

Gold‐Catalyzed Formal Dehydro‐Diels–Alder Reactions of Ene‐Ynamide Derivatives Bearing Terminal Alkyne Chains: Scope and Mechanistic Studies

A new protocol for the synthesis of a variety of N‐containing aromatic heterocycles by a formal gold‐catalyzed dehydro‐Diels–Alder reaction of ynamide derivatives has been developed. Deuterium‐labeling experiments and kinetic studies support the involvement of a dual gold catalysis mechanism in which a gold acetylide moiety adds onto an aurated keteneiminium.     

Stereoselective Rhodium‐Catalysed [2+2+2] Cycloaddition of Linear Allene–Ene/Yne–Allene Substrates: Reactivity and Theoretical Mechanistic Studies

Allene–ene–allene ( 2 and 5 ) and allene–yne–allene ( 3 and 7 ) N‐tosyl and O‐linked substrates were satisfactorily synthesised. The [2+2+2] cycloaddition reaction catalysed by the Wilkinson catalyst [RhCl(PPh₃)₃] was evaluated. Substrates 2 and 5 , which bear a double bond in the central position, gave a tricyclic structure in a reaction in which four contiguous stereogenic centres were formed as a single diastereomer. The reaction of substrates 3 and 7 , which bear a triple bond in the central position, gave a tricyclic structure with a cyclohexenic ring core, again in a diastereoselective manner. All cycloadducts were formed by a regioselective reaction of the inner allene double bond and, therefore, feature an exocyclic diene motif. A Diels–Alder reaction on N‐tosyl linked cycloadducts 8 and 10 allowed pentacyclic scaffolds to be diastereoselectively constructed. The reactivity of the allenes on [2+2+2] cycloaddition reactions was studied for the first time by density functional theory calculations. This mechanistic study rationalizes the order in which the unsaturations take part in the catalytic cycle, the reactivity of the two double bonds of the allene towards the [2+2+2] cycloaddition reaction, and the diastereoselectivity of the reaction.     

Gold‐Catalyzed Formal [4+1]/[4+3] Cycloadditions of Diazo Esters with Triazines

Reported herein is the unprecedented gold‐catalyzed formal [4+1]/[4+3] cycloadditions of diazo esters with hexahydro‐1,3,4‐triazines, thus providing five‐ and seven‐membered heterocycles in moderate to high yields under mild reaction conditions. These reactions feature the use of a gold complex to accomplish the diverse annulations and the first example of the involvement of a gold metallo‐enolcarbene in a cycloaddition. It is also the first utilization of stable triazines as formal dipolar adducts in the carbene‐involved cycloadditions. Mechanistic investigations reveal that the triazines reacted directly, rather than as formaldimine precursors, in the reaction process.     

Unravelling RNA–Substrate Interactions in a Ribozyme‐Catalysed Reaction Using Fluorescent Turn‐On Probes

The Diels–Alder reaction is one of the most important C?C bond‐forming reactions in organic chemistry, and much effort has been devoted to controlling its enantio‐ and diastereoselectivity. The Diels–Alderase ribozyme (DAse) catalyses the reaction between anthracene dienes and maleimide dienophiles with multiple‐turnover, stereoselectivity, and up to 1100‐fold rate acceleration. Here, a new generation of anthracene‐BODIPY‐based fluorescent probes was developed to monitor catalysis by the DAse. The brightness of these probes increases up to 93‐fold upon reaction with N‐pentylmaleimide (NPM), making these useful tools for investigating the stereochemistry of the ribozyme‐catalysed reaction. With these probes, we observed that the DAse catalyses the reaction with >91 % de and >99 % ee. The stereochemistry of the major product was determined unambiguously by rotating‐frame nuclear Overhauser NMR spectroscopy (ROESY‐NMR) and is in agreement with crystallographic structure information. The pronounced fluorescence change of the probes furthermore allowed a complete kinetic analysis, which revealed an ordered bi uni type reaction mechanism, with the dienophile binding first.     

Mechanistic Intricacies of Gold‐Catalyzed Intermolecular Cycloadditions between Allenamides and Dienes

The mechanism of the gold‐catalyzed intermolecular cycloaddition between allenamides and 1,3‐dienes has been explored by means of a combined experimental and computational approach. The formation of the major [4+2] cycloaddition products can be explained by invoking different pathways, the preferred ones being determined by the nature of the diene (electron neutral vs. electron rich) and the type of the gold catalyst (AuCl vs. [IPrAu]⁺, IPr=1,3‐bis(2,6‐diisopropylphenyl)imidazole‐2‐ylidene). Therefore, in reactions catalyzed by AuCl, electron‐neutral dienes favor a concerted [4+3] cycloaddition followed by a ring contraction event, whereas electron‐rich dienes prefer a stepwise cationic pathway to give the same type of formal [4+2] products. On the other hand, the theoretical data suggest that by using a cationic gold catalyst, such as [IPrAuCl]/AgSbF₆, the mechanism involves a direct [4+2] cycloaddition between the diene and the gold‐activated allenamide. The theoretical data are also consistent with the observed regioselectivity as well as with the high selectivity towards the formation of the enamide products with a Z configuration. Finally, our data also explain the formation of the minor [2+2] products that are obtained in certain cases.     

Enantioselective Nucleophilic β‐Carbon‐Atom Amination of Enals: Carbene‐Catalyzed Formal [3+2] Reactions

An enantioselective β‐carbon amination for enals is disclosed. The nitrogen atom from a protected hydrazine with suitable electronic properties readily behaves as a nucleophile. Addition of the nitrogen nucleophile to a catalytically generated N‐heterocyclic‐carbene‐bound α,β‐unsaturated acyl azolium intermediate constructs a new carbon–nitrogen bond asymmetrically. The pyrazolidinone products from our catalytic reactions are common scaffolds in bioactive molecules, and can be easily transformed into useful compounds such as β³‐amino‐acid derivatives.     

Synthesis of Aminopyridines and Aminopyridones by Cobalt‐Catalyzed [2+2+2] Cycloadditions Involving Yne‐Ynamides: Scope,Limitations, and Mechanistic Insights

An in‐depth study of the cobalt‐catalyzed [2+2+2] cycloaddition between yne‐ynamides and nitriles to afford aminopyridines has been carried out. About 30 nitriles exhibiting a broad range of steric demand and electronic properties have been evaluated, some of which open new perspectives in metal‐catalyzed arene formation. In particular, the use of [CpCo(CO)(dmfu)] (dmfu=dimethyl fumarate) as a precatalyst made possible the incorporation of electron‐deficient nitriles into the pyridine core. Modification of the substitution pattern at the yne‐ynamide allows the regioselectivity to be switched toward 3‐ or 4‐aminopyridines. Application of this synthetic methodology to the construction of the aminopyridone framework using a yne‐ynamide and an isocyanate was also briefly examined. DFT computations suggest that 3‐aminopyridines are formed by formal [4+2] cycloaddition between the nitrile and the intermediate cobaltacyclopentadiene, whereas 4‐aminopyridines arise from an insertion pathway.     

Intracellular Ruthenium‐Promoted (2+2+2) Cycloadditions

Metal‐mediated intracellular reactions are becoming invaluable tools in chemical and cell biology, and hold promise for strongly impacting the field of biomedicine. Most of the reactions reported so far involve either uncaging or redox processes. Demonstrated here for the first time is the viability of performing multicomponent alkyne cycloaromatizations inside live mammalian cells using ruthenium catalysts. Both fully intramolecular and intermolecular cycloadditions of diynes with alkynes are feasible, the latter providing an intracellular synthesis of appealing anthraquinones. The power of the approach is further demonstrated by generating anthraquinone AIEgens (AIE=aggregation induced emission) that otherwise do not go inside cells, and by modifying the intracellular distribution of the products by simply varying the type of ruthenium complex.     

The Sequential Building of Chiral Macrocyclic Bis‐β‐Lactams by Double Staudinger–Cu‐Catalyzed Azide–Alkyne Cycloadditions

A novel approach for the synthesis of macrocyclic bis‐β‐lactams based on the Cu‐catalyzed alkyne–azide cycloaddition (CuAAC) is reported. The procedure is general and allows access to a full range of diastereomerically or enantiomerically pure macrocyclic cavities in good yields. The incorporation of chiral oxazolidinone fragments at C3 in the β‐lactam rings allows the total enantiocontrol of the process.     

Desilylation‐Activated Propargylic Transformation: Enantioselective Copper‐Catalyzed [3+2] Cycloaddition of Propargylic Esters with β‐Naphthol or Phenol Derivatives

A copper‐catalyzed asymmetric [3+2] cycloaddition of 3‐trimethylsilylpropargylic esters with either β‐naphthols or electron‐rich phenols has been realized and proceeds by a desilylation‐activated process. Under the catalysis of Cu(OAc)₂?H₂O in combination with a structurally optimized ketimine P,N,N‐ligand, a wide range of optically active 1,2‐dihydronaphtho[2,1‐b]furans or 2,3‐dihydrobenzofurans were obtained in good yields and with high enantioselectivities (up to 96 % ee). This represents the first desilylation‐activated catalytic asymmetric propargylic transformation.     

Rapid Room‐Temperature,Chemoselective C −C Coupling of Poly(pseudo)halogenated Arenes Enabled by Palladium(I) Catalysis in Air

While chemoselectivities in Pd⁰‐catalyzed coupling reactions are frequently non‐intuitive and a result of a complex interplay of ligand/catalyst, substrate, and reaction conditions, we herein report a general method based on Pd^I that allows for an a priori predictable chemoselective C −C coupling at C−Br in preference to C−OTf and C−Cl bonds, regardless of the electronic or steric bias of the substrate. The C−C bond formations are extremely rapid (<5 min at RT) and are catalyzed by an air‐ and moisture‐stable Pd^I dimer under open‐flask conditions.     

Borane‐Catalyzed Reductive α‐Silylation of Conjugated Esters and Amides Leaving Carbonyl Groups Intact

Described herein is the development of the B(C₆F₅)₃‐catalyzed hydrosilylation of α,β‐unsaturated esters and amides to afford synthetically valuable α‐silyl carbonyl products. The α‐silylation occurs chemoselectively, thus leaving the labile carbonyl groups intact. The reaction features a broad scope of both acyclic and cyclic substrates, and the synthetic utility of the obtained α‐silyl carbonyl products is also demonstrated. Mechanistic studies revealed two operative steps: fast 1,4‐hydrosilylation of conjugated carbonyls and then slow silyl group migration of a silyl ether intermediate.