Physicochemical properties of KOH-H<Subscript>2</Subscript>O<Subscript>2</Subscript>-H<Subscript>2</Subscript>O solutions

Density, viscosity, and surface tension of KOH-H₂O₂-H₂O solutions used to synthesize potassium superoxide in sprayer apparatus were studied with various relative amounts of the components in the temperature range 0–30°C. Analytical dependences of the above-mentioned quantities on temperature and solvent (water) content of the system were found.     

Solubility isotherm for the Na<Subscript>2</Subscript>MoO<Subscript>4</Subscript>-Na<Subscript>2</Subscript>SO<Subscript>4</Subscript>-H<Subscript>2</Subscript>O system

Solubility in the Na₂MoO₄-Na₂SO₄-H₂O system was studied using isothermal saturation at 5–100°C. The boundaries of crystallization fields were determined for sodium sulfate and sodium molybdate. Solid solutions were not observed within the range of the temperatures studied. The density, refractive index, and dynamic viscosity of the saturated solutions of the system were determined, and these data were used to calculate the molar volume, kinematic viscosity, and apparent molar volume of the sum of salts in these solutions. All property isotherms of solutions are in a strict correlation with the solubility in the system; this correlation is represented as an isobaric-isothermal diagram.     

Viscosity and shrinkage of porous and quartzoid glasses of the Na<Subscript>2</Subscript>O-B<Subscript>2</Subscript>O<Subscript>3</Subscript>-SiO<Subscript>2</Subscript> system

Shrinkage of porous glasses on heating from 20 to 800°C was studied and temperature dependences of the viscosity in the range of 10¹¹–10¹³ P were determined for quartzoid (sintered) glasses based on five glasses with different compositions in the Na₂O-B₂O₃-SiO₂ system. The shrinkage of porous glasses and the viscosity of quartzoid glasses were analyzed in relation to their composition and temperature of preliminary thermal treatment.     

Phase equilibriums,ion association,and mechanisms of solvation in the LiN(CF<Subscript>3</Subscript>SO<Subscript>2</Subscript>)<Subscript>2</Subscript>-(CH<Subscript>3</Subscript>)<Subscript>2</Subscript>SO<Subscript>2</Subscript> system

The phase diagrams, isotherms of the electrical conductivity, Raman spectra, and time correlation functions of vibrational dephasing are studied for the LiN(CF₃SO₂)₂-(CH₃)₂SO₂ system, which is promising for use as an electrolyte in medium-temperature lithium-ion batteries. The phase diagram of this system contains a broad supercooled region. It is shown that the concentration dependences of the electrical conductivity are typical for solutions of strong electrolytes. The Raman spectra and the time correlation functions of vibrational dephasing for the anion and the solvent indicate that in the supercooling range, cations are weakly solvated by solvent molecules and form ion pairs.     

Solid electrolytes with cesium cation conductivity in the Ga<Subscript>2</Subscript>O<Subscript>3</Subscript>-TiO<Subscript>2</Subscript>-Cs<Subscript>2</Subscript>O system

Solid solutions based on cesium monogallate CsGaO₂ are synthesized in the Ga₂O₃-TiO₂-Cs₂O system. Their crystalline structure and also temperature and concentration conductivity dependences are studied. The cesium cation character of conductivity is confirmed. The most conducting samples contain an excess of cesium oxide and have the structure of high-temperature γ-modification of KAlO₂. Their specific conductivity is (5.0–6.7) × 10^?3 S cm^?1 at 400 °C, (2.5–5.0) × 10^?2 S cm^?1 at 700°C at the activation energy of 33–35 kJ/mol^?1.     

Thermodynamic properties of aqueous-alcoholic solutions of sodium chloride. H<Subscript>2</Subscript>O-2-C<Subscript>3</Subscript>H<Subscript>7</Subscript>OH-NaCl

The temperature-concentration dependences of the NaCl activity coefficient in aqueous solutions of isopropanol (propanol-2) at temperatures of 298.15 and 323.15 K (solution ionic force, 0.01 to 3m; alcohol content, 10–60 wt %) were determined through the electromotive force method with an ion-selective electrode. A Pitzer model was used to mathematically describe the thermodynamic properties. The integral Gibbs energy of the solution formation of the H₂O-2-C₃H₇OH-NaCl ternary system was performed according to Darken’s method. The dissociation degree of salt in the investigated solutions was estimated using the literature data on the association constant of NaCl in aqueous-isopropanol solution.     

Structure of NR<Subscript>4</Subscript>BR-H<Subscript>2</Subscript>O and CoBr<Subscript>2</Subscript>-NR<Subscript>4</Subscript>BR-H<Subscript>2</Subscript>O solutions according to electronic and IR spectroscopy data

Absorption spectra of NR₄Br-H₂O and CoBr₂-NR₄Br-H₂O (R = Et, Bu) aqueous solutions were measured within the range of 1000–25000 cm⁻¹, and the influence of tetraalkylammonium cations on the equilibrium between cobalt octahedral and tetrahedral complexes was revealed. The specificity of hydration interactions in solutions under study in various concentration ranges and resulting from them difference in spectral characteristics were analyzed. Variously directed changes in positions of bands in the region of stretching vibrations, a composite frequency of 5200 cm⁻¹, and the first water overtone occurring due to the concentration variation were found.     

Behavior of silver sulfide in the system Ag<Subscript>2</Subscript>S-Fe(NO<Subscript>3</Subscript>)<Subscript>3</Subscript>-HNO<Subscript>3</Subscript>-H<Subscript>2</Subscript>O

Behavior of silver sulfide in the system Ag₂S-Fe(NO₃)₃-HNO₃-H₂O was studied at 25, 55, and 80°C using the method of the simplex-lattice experiment design. The quantitative dependences of Ag₂S oxidation on the concentrations of the acid and Fe³⁺ were determined. The isoconcentration diagrams were obtained.     

High-temperature heat capacity of stannates Er<Subscript>2</Subscript>Sn<Subscript>2</Subscript>O<Subscript>7</Subscript> and Tm<Subscript>2</Subscript>Sn<Subscript>2</Subscript>O<Subscript>7</Subscript>

Erbium stannate Er₂Sn₂O₇ and thulium stannate Tm₂Sn₂O₇ with a pyrochlore-type structure were produced by solid-phase synthesis by calcining stoichiometric mixtures of the respective oxides in air at 1473 K for 240 and 200 h. The high-temperature heat capacity of Er2Sn2O7 and Tm₂Sn₂O₇ was studied by differential thermal calorimetry at 353–1000 K. From the experimental dependences C _P = f(T), the thermodynamic functions (enthalpy change, entropy change, and reduced Gibbs free energy) of oxide compounds were calculated.     

Tysonite-type solid solutions in the BiF<Subscript>3</Subscript>-BiOF-BaF<Subscript>2</Subscript> system: Polymorphism and anionic conductivity

Tysonite solid solutions Bi_1−x Ba _x O _y F_3−x−2y in the BiF₃-BiOF-BaF₂ system were obtained by solid-phase synthesis in sealed copper tubes in an argon atmosphere at 873 K with subsequent quenching. The solid solutions were studied by X-ray diffraction, electron diffraction, and impedance spectroscopy. On the basis of X-ray powder diffraction data, the homogeneity ranges of the tysonite solid solutions were determined and the scheme of their location in the BiF₃-BiOF-BaF₂ system at 873 K was suggested. Aliovalent substitutions in both the cation and anion sublattices Ba²⁺ → Bi³⁺ and O²⁻ → F⁻ made it possible to vary the concentration of anion vacancies. It was found that, at a high concentration of anion defects at 873 K, the hexagonal tysonite modification with space group P6₃/mmc is stable. With a decrease in the defect concentration, the trigonal tysonite modification with space group $ P\bar 3c1 $ P\bar 3c1 becomes stable. An ordered monoclinic tysonite-type modification BiO _y F_{3 − 2y} (0.13 < y < 0.23) was revealed. For the homogeneity ranges of all tysonite phases, dependences of the unit cell parameters and conductivity on the composition along the sections with a constant barium or oxygen content were reported. The most probable location of oxygen anions and anion vacancies in the tysonite structure is discussed.     

The synthesis and properties of solid solutions based on Ba<Subscript>4</Subscript>Ca<Subscript>2</Subscript>Nb<Subscript>2</Subscript>O<Subscript>11</Subscript>

(Ba_{1 ? x} Ca _x )₆Nb₂O₁₁ solid solutions were synthesized. The compositions were shown to be single-phase at 0.23 ≤ x ≤ 0.47 and have a double perovskite cubic structure with an incomplete oxygen sublattice. The interaction of solid solutions with water vapor and their electrical properties were studied. In dry atmosphere, these complex oxides were mixed oxygen-hole conductors. In humid atmosphere, they intercalated water and exhibited protonic conductivity. The influence of Ba/Ca isovalent substitution, the dynamics of the oxygen sublattice, and the concentration of intercalated water on the value and contribution of protonic and hole conductivity was analyzed.     

Conductivity of molten LiF-ZrF<Subscript>4</Subscript>, NaF-ZrF<Subscript>4</Subscript>, KF-ZrF<Subscript>4</Subscript>, RbF-ZrF<Subscript>4</Subscript>, and CsF-ZrF<Subscript>4</Subscript> systems

Specific conductivity of molten salt mixtures of the LiF-ZrF₄, NaF-ZrF₄, KF-ZrF₄, RbF-ZrF₄, and CsF-ZrF₄ systems is measured in the whole concentration range using the reference capillary technique. The results are presented in the form of equations of the χ = a + bT + cT ² [S m^?1] type. The concentration dependences of molar conductivity are calculated on the basis of the density data. The obtained regularities are explained in the terms of the complex model of ion melt structures.     

Structure and electric properties of Na<Subscript>2</Subscript>SO<Subscript>4</Subscript>-NaPO<Subscript>3</Subscript> glasses

The influence of the SO₄²⁻ ion on the temperature and concentration dependences of electric conductivity and the structure of sodium phosphate oxide glasses was studied. The increased electric conductivity of sulfate-phosphate glasses was explained by the formation of mixed sulfate-phosphate fragments with terminal SO₄²⁻ ions in the structure of glasses in the Na₂SO₄-NaPO₃ system. The dissociation energies of the sodium sulfate fragments are lower than those of pure oxide sodium phosphate structural units. As a result, the number of dissociated sodium ions increases, the activation energy of electric conductivity falls, and the conductivity (at 25°C) increases approximately 270-fold relative to the conductivity of NaPO₃. The arrangement of SO₄²⁻ ions in the structure was evaluated from the IR spectra of the glasses.     

Concentration dependence of the density of C<Subscript>70</Subscript> fullerene solutions in aromatic solvents

The concentration dependences of densities of fullerene C₇₀ solutions in benzene, toluene, and p-xylene were determined pycnometrically.     

Features of interlayer electron transport in quasi-two-dimensional organic metal (ET)<Subscript>4</Subscript>HgBr<Subscript>4</Subscript>(C<Subscript>6</Subscript>H<Subscript>4</Subscript>Cl<Subscript>2</Subscript>)

Angular dependences of the interlayer magnetoresistance in quasi-two-dimensional organic metal (ET)₄HgBr₄(C₆H₄Cl₂) (ET is bis(ethylenedithio)tetrathiafulvalene) in magnetic fields up to 15 T in the temperature range 1.5–4.2 K were studied. Interlayer charge transport in this metal can be described within the framework of the model of almost noninteracting metal layers.     

Composition of heteroassociates formed in a binary liquid system HF-Et<Subscript>2</Subscript>O

IR spectra and densities of solutions in a binary liquid system (BLS) HF-Et₂O were measured for the first time for the molar ratios of the components ranging from 1: 12 to 14: 1 and 31: 1, respectively. An analysis of the concentration dependences of the normalized (to the total number of moles of the BLS components in 1 L) absorbance and excess density of the studied solutions revealed that they contained heteroassociates with stoichiometric ratios of the molecules of 1: 2, 2: 1, 4: 1, and 11–12: 1. The concentration range in which each associate is formed in the binary mixture HF-Et₂O was estimated for all the associates. The results obtained were compared with the data on the HF: Solv ratios (Solv is solvent) in molecular complexes that prevail in the seven BLS HF-organic solvent studied earlier. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1833–1839, September, 2008.     

Electrochemical Synthesis of Co-intercalation Compounds in the Graphite-H<Subscript>2</Subscript>SO<Subscript>4</Subscript>-H<Subscript>3</Subscript>PO<Subscript>4</Subscript>System

Anodic oxidation of highly oriented pyrolytic graphite in an electrolyte containing concentrated sulfuric and anhydrous phosphoric acids is studied for the first time. The synthesis was carried out under galvanostatic conditions at a current I = 0.5 mA and an elevated temperature (t = 80°C). Intercalation compounds of graphite (ICG) are shown to form at all concentration ratios of H₂SO₄ and H³PO⁴ acids. The intercalation compound of step I forms in solutions containing more than 80 wt % H₂SO₄, a mixture of compounds of intercalation steps I and II forms in 60% H²SO⁴, intercalation step II is realized in the sulfuric acid concentration range from 10 to 40%, and a mixture of compounds of intercalation steps III and II is formed in 5% H₂SO₄ solutions. The threshold concentration of H₂SO₄ intercalation is ∼2%. With the decrease in active intercalate (H₂SO₄) concentration, the charging curves are gradually smoothed, the intercalation step number increases, and the potentials of ICG formation also increase. As the sulfuric acid concentration in the electrolyte changes from 96 to 40 wt %, the filled-layer thickness d _i in ICG monotonously increases from 0.803 to 0.820 nm, which apparently is associated with the greater size of phosphoric acid molecules. With further increase in H₃PO₄ concentration in solution, d _i remains unchanged. According to the results of chemical analysis, both acids are simultaneously incorporated into the graphite interplanar spacing and their ratio in ICG is determined by the electrolyte composition.__________Translated from Elektrokhimiya, Vol. 41, No. 5, 2005, pp. 651–655.Original Russian Text Copyright © 2005 by Leshin, Sorokina, Avdeev.     

Thermodynamic Properties of AgIn<Subscript>2</Subscript>Te<Subscript>3</Subscript>I and AgIn<Subscript>2</Subscript>Te<Subscript>3</Subscript>Br,Determined by EMF Method

Differential thermal analysis (DTA), X-ray diffraction (XRD), and electromotive force (EMF) are used to triangulate Ag–In–Te–I(Br) systems in the vicinity of compounds AgIn₂Te₃I and AgIn₂Te₃Br. The three-dimensional position of the AgIn₂Te₃I–InTe–Ag₂Te–AgI and AgIn₂Te₃Br–InTe–Ag₃TeBr phase areas with respect to the figurative points of silver is used to create equations of potential-determining chemical reactions. The potential-determining reactions are conducted in (?)C|Ag|Ag₃GeS₃I(Br) glass|D|C(+) electrochemical cells (ECCs), where C stands for inert (graphite) electrodes, Ag and D are ECC electrodes (D denotes alloys of one-, three-, and four-phase areas), and Ag₃GeS₃I and Ag₃GeS₃Br glasses are membranes with purely ionic Ag⁺ conductivity. Linear parts of the temperature dependences of the cell EMFs are used to calculate the standard integral thermodynamic functions of saturated solid solutions based on AgIn₂Te₃I and AgIn₂Te₃Br, and the relative partial thermodynamic functions of silver in the stoichiometric quaternary compounds.     

Transition metal salts of H<Subscript>4</Subscript>PMo<Subscript>11</Subscript>VO<Subscript>40</Subscript> for efficient H<Subscript>2</Subscript>S removal in the liquid redox process

Several transition metal (Cu²⁺, Fe³⁺, Zn²⁺, Mn⁴⁺, and Cr⁶⁺) salts of H₄PMo₁₁VO₄₀ were prepared and their solutions were used initially for H₂S removal in the liquid redox process. H₂S removal tests were performed by dynamic absorption experiments. Among these polyoxometalates, that with the Cu²⁺ cation was found to have pronounced H₂S removal performance with the removal efficiency of up to 98%. The relevant oxidative desulfurization mechanism and the role of Cu²⁺ were studied.