Application of Capillary and Free-Flow Zone Electrophoresis for Analysis and Purification of Antimicrobial β-Alanyl-Tyrosine from Hemolymph of Fleshfly Neobellieria bullata

The problem of a growing resistance of bacteria and other microorganisms to conventional antibiotics gave rise to a search for new potent antimicrobial agents. Insect antimicrobial peptides (AMPs) seem to be promising novel potential anti-infective therapeutics. The dipeptide β-alanyl-tyrosine (β-Ala-Tyr) is one of the endogenous insect toxins exhibiting antibacterial activity against both Gram-negative and Gram-positive bacteria. Prior to testing its other antimicrobial activities, it has to be prepared in a pure form. In this study, we have developed a capillary zone electrophoresis (CZE) method for analysis of β-Ala-Tyr isolated from the extract of the hemolymph of larvae of the fleshfly Neobellieria bullata by reversed-phase high-performance liquid chromatography (RP-HPLC). Based on our previously described correlation between CZE and free-flow zone electrophoresis (FFZE), analytical CZE separation of β-Ala-Tyr and its admixtures have been converted into preparative purification of β-Ala-Tyr by FFZE with preparative capacity of 45.5 mg per hour. The high purity degree of the β-Ala-Tyr obtained by FFZE fractionation was confirmed by its subsequent CZE analysis.     

Separation of nicotine metabolites by capillary zone electrophoresis and capillary zone electrophoresis/mass spectrometry

The use of capillary zone electrophoresis (CZE) and capillary zone electrophoresis/mass spectrometry (CZE/MS) has been demonstrated, in principle, for the separation of nicotine and nicotine metabolites. The buffer system developed for separation and detection by CZE/UV was modified for use in CZE/MS analysis. Several of the metabolites are isobaric and tandem mass spectrometric (MS/MS) techniques have been used to differentiate such analytes.     

Up-scaling capillary zone electrophoresis separations of polydisperse anionic polyelectrolytes with preparative free-flow electrophoresis exemplified with a soil fulvic acid

A scale-up of analytical capillary zone electrophoresis (CZE) to preparative free-flow electrophoresis (FFE) is described. FFE allows fractionations based on charge densities in larger amounts than in CZE, enabling further off-line analysis of the fractions. Model compounds (carboxylic acids and polystyrene sulfonates) showed a similar behavior in FFE as in CZE. Diffusion and electrodynamic distortion effects are more pronounced in FFE than in CZE. A soil fulvic acid was analyzed by CZE and fractionated by FFE. A comparison of the FFE fractions with CZE measurements of the same sample using the effective mobility scale showed good agreement of the two methods.     

Capillary zone electrophoresis of alpha-helical diastereomeric peptide pairs with anionic ion-pairing reagents

The present study uses an unique capillary electrophoresis (CE) approach, that we have termed ion-interaction capillary zone electrophoresis (II-CZE), for the separation of diastereomeric peptide pairs where a single site in the centre of the non-polar face of an 18-residue amphipathic alpha-helical peptide is substituted by the 19 L- or D-amino acids. Through the addition of perfluorinated acids at very high concentrations (up to 400 mM), such concentration levels not having been used previously in chromatography or CE, to the background electrolyte (pH 2.0), we have been able to achieve baseline resolution of all 19 diastereomeric peptide pairs with an uncoated capillary. Since each diastereomeric peptide pair has the same sequence, identical mass-to-charge ratio and identical intrinsic hydrophobicity, such a separation by CZE has previously been considered theoretically impossible. Excellent resolution was achieved due to maximum advantage being taken of even subtle disruption of peptide structure/conformation (due to the presence of D-amino acids) of the non-polar face of the amphipathic alpha-helix and its interaction with the hydrophobic anionic ion-pairing reagents. In addition, due to the excellent resolution of diastereomeric peptide pairs by this novel CZE approach, we have also been able to separate a mixture of these closely-related alpha-helical peptides.     

Separation of naturally occurring triterpenoidal saponins by capillary zone electrophoresis.

A high-performance capillary electrophoresis (HPCE) was successfully applied to the separation and quantitation of naturally occurring oleanene triterpenoidal saponins. The HPCE adapted to the separation of two pairs of disteriomeric saponins (1-2) or (3-4), obtained from Trifolium alexandrinum seeds, was based on capillary zone electrophoresis (CZE) in borate buffer with UV detection at 195 nm. An usual technique for isolation and group separation of saponins was developed as an appropriate purification step prior to determination of individual saponins by CZE. The separation parameters such as borate concentration, pH and applied voltage were varied in order to find the best compromise that complied with demands for high separation, short duration and sufficiently high detector response. The optimum running conditions were found to be 60 mM borate buffer, pH 10 and 12 kV. Under the alkaline borate electrolyte, no resolution was achieved for the saponins (1 and 3) or (2 and 4) in a single mixture, except when 20 mM beta-cyclodextrin was added to the running electrolyte. With the combined techniques of group separation, purification and CZE, a rapid and efficient method for the determination of naturally occurring diasteriomeric saponins is now available.     

On-line nanoliter cycle sequencing reaction with capillary zone electrophoresis purification for DNA sequencing

An integrated system for DNA sequencing based on a nanoreactor for cycle-sequencing reaction coupled with on-line capillary zone electrophoresis (CZE) for purification and capillary gel electrophoresis (CGE) for separation is presented. Less than 100 nl of premixed reagent solution, which includes dye-labeled terminator pre-mix, bovine serum albumin and template, was hydrodynamically injected into a fused-silica capillary (75 microm I.D.) inside a laboratory-made microthermocycler for cycle sequencing reaction. In the same capillary, the reaction products were purified by CZE followed by on-line injection of the DNA fragments into another capillary for CGE. Over 540 base pairs (bp) of DNA can be separated and the bases called for single-standed DNA with 0.9% error rate. The total time was about 3.5 h, or a cycle time of 2 h with staggered operation. For double-stranded DNA, a longer reaction time was required and base calling up to 490 bp with 1.2% error rate was achieved. The whole system is readily adaptable to automated multiplex operation for DNA sequencing or polymerase chain reaction analysis.     

Stacking in capillary zone electrophoresis

Due to the short light path of the capillaries, the CE detection limit based on concentration, is far less than that of HPLC and not sufficient for many practical applications. Several methods, based on different electrophoretic maneuvers, can concentrate the sample (stack) easily on the capillary before the separation step of capillary zone electrophoresis (CZE). These methods incorporate different types of discontinuous buffers as the means for invoking different velocities to the same analyte molecules to produce a sharpening of the band (stacking). In CZE, these buffers can be often very simple such as sample dilution or adding to the sample a high concentration of a fast mobility ion. However, in other applications these buffers can be as complicated as those required for isotachophoresis. Stacking can often yield a concentration factor of 5-30-fold, which can improve greatly in CZE the detection limits bringing them very close to those of HPLC. Different methods of stacking, the importance of discontinuous buffers and the different mechanism for concentration on the capillary are reviewed here. As there is a need for more practical applications, there will be more methods devised for stacking in CZE.     

Correlation of migration behavior in free-flow zone electrophoresis and electrophoretic titration curve

The correlation of electrophoretic migration behavior in free-flow zone electrophoresis (FFZE) and electrophoretic titration curve (ETC) has been explored. It is shown that the ETC of a protein or a mixture of proteins can be used to predict the fraction numbers at which those proteins elute in a preparative scale FFZE experiment. The ETC is a quick and effective way to choose optimal buffer conditions in FFZE. FFZE is employed to determine the isoelectric points (pI) of proteins whose pIs lie beyond the range of IEF 3-9 gels. It is found that separations in FFZE are governed by the net surface charge of the proteins.     

Ion-interaction-capillary zone electrophoresis of cationic proteomic peptide standards

We have employed a novel capillary electrophoresis (CE) approach recently developed in our laboratory, termed ion-interaction-capillary zone electrophoresis (II-CZE), to the resolution of a mixture of 27 synthetic cationic proteomic peptide standards. These peptides were comprised of three groups of nine peptides (with net charges of +1, +2 and +3 for all nine peptides within a group), the hydrophobicity of the nine peptides within a group varying only subtly between adjacent peptides. This bidimensional CE approach achieved excellent resolution of the peptides with high peak capacity by combining the powerful CZE mechanism located in the background electrolyte (BGE) with an hydrophobicity-based mechanism also located in the BGE, the latter consisting of high concentrations (up to 0.4M) of aqueous perfluorinated acids (trifluoroacetic acid, pentafluoropropionic acid and heptafluorobutyric acid). Thus, concomitant with a CZE separation of the three differently charged groups of peptides, there is an hydrophobically-mediated separation of the peptides within these groups effected through interaction of the hydrophobic anions of the perfluorinated acids with hydrophobic amino acid side-chains in the peptides. This methodology is dramatically different from other CE methods that have used complexing agents such as micelles or cyclodextrins in MEKC. Overall, the results presented here demonstrate the value of CE as a peptide separative tool in its own right, including its use for proteomic applications, and not merely as a complementary technique to reversed-phase high-performance liquid chromatography (RP-HPLC).     

Multivalent weak electrolytes - risky background electrolytes for capillary zone electrophoresis

Multivalent weak acids and bases are useful components of buffers in electrophoresis. The use of such buffers as background electrolytes (BGEs) in capillary zone electrophoresis (CZE) is, however, risky due to the existence of unsafe regions in the analytical window of the separation. This contribution discusses the problems and shows that multivalent weak species in BGEs bring about the same effects as mixtures of two independent co-ions, i.e., the presence of two centers of symmetry in the electropherograms and the existence of a migrating system zone with a mobility in between these two centers of symmetry. The system zone deteriorates the analytical separation and detection of the analytes in its neighborhood. Illustrative experimental examples for both cationic and anionic CZE are shown and related discussion is given. Finally, some basic rules are formulated to avoid the preparation of risky BGEs.     

On-line microwave-induced helium plasma atomic emission detection for capillary zone electrophoresis

We report a feasibility study on using a microwave-induced helium plasma atomic emission detector (MIP-AED) as an on-line detector in capillary zone electrophoresis (CZE). To couple CZE to MIP-AED, we used an ion exchange membrane capillary to connect the separation capillary to the interfacing capillary. The outlet end of the interfacing capillary was placed directly in the discharge tube of the MIP-AED system. The electroosmotic flow generated in the separation capillary carried the analytes and the electrolyte buffer solution through the interfacing capillary into the MIP-AED discharge tube where the analytes were detected. The performance of the CZE/MIP-AED system was evaluated with trimethyltin chloride, dimethyltin dichloride, n-propanol, and 2-butanone. The preliminary results indicate that the MIP-AED can be used in CZE to provide element-specific detection for target analytes.     

Determination of ciprofloxacin and its impurities by capillary zone electrophoresis

Capillary zone electrophoresis (CZE) has been elaborated for separation, identification and determination of ciprofloxacin and its impurities. The separation, phosphate buffer pH 6.0 was supplemented with 0.075 M pentane-1-sulfonic acid sodium salt. The elaborated method was validated. The selectivity, linearity, limits of detection (LOD) and quantification (LOQ), precision, and accuracy of capillary zone electrophoresis were evaluated. The results obtained by CZE were also compared with those obtained by liquid chromatography. Regarding the validation results the CE method fulfils the current European Pharmacopoeia (Eur. Ph.) requirements. The evaluated CE method could be applicable to the analysis of different medicinal products containing ciprofloxacin.     

Determination of ebrotidine metabolites in overlapping peaks from capillary zone electrophoresis using chemometric methods

This paper illustrates the possibilities of chemometric methods in the resolution and quantification of various compounds in overlapping peaks from capillary electrophoresis. Ebrotidine and most of its metabolites were efficiently separated by capillary zone electrophoresis (CZE) in a fused-silica capillary. However, the procedure was not suitable for the physical separation of the three less ionizable metabolites, which comigrated and overlapped with the electroosmotic flow signal. Multivariate curve resolution based on an alternating least squares procedure was used for their mathematical resolution. For such a purpose, data obtained in the CZE system with a diode array detector, which consisted of UV spectra registered over time, were analyzed. The ebrotidine metabolites were successfully resolved and quantified in synthetic mixtures and urine samples.     

Quantitative capillary zone electrophoresis of inorganic anions

Despite the availability of commercial capillary electrophoresis systems for over ten years, where quantitative analysis is required, capillary zone electrophoresis (CZE) has often failed to replace ion chromatography as the method of choice for a large number of analytes, not least inorganic anions. To investigate the reasons for this apparent failing, a review is presented of work that has been carried out to-date involving the quantitative application of CZE to the determination of inorganic anions in industrial and environmental samples. This review summarizes work both investigating and improving the quantitative aspects of the CZE of inorganic anions. A complete survey of how CZE has been applied to the determination of inorganic anions in real samples is given, including what, if any, analytical performance parameters were investigated and quoted, and if quality assurance data and validation methods were briefly considered, thoroughly investigated or simply ignored.     

Chiral capillary electrophoresis as predictor for separation of drug enantiomers in continuous flow zone electrophoresis

Separation of the enantiomers of chlorpheniramine and methadone in acidic buffers containing carboxymethyl-betacyclodextrin (CMCD) as chiral selector was investigated by capillary zone electrophoresis. For a range of pH and CMCD concentrations, the mobility difference and resolution of the enantiomers were determined. Then, conditions known to provide well resolved enantiomers and optimized chiral separation were applied to chiral continuous flow electrophoresis. In that approach, a thin film of fluid flowing between two parallel plates is employed as carrier for electrophoresis. The electrolytes and the sample are continuously admitted at one end of the electrophoresis chamber and are fractionated by an array of outlet tubes at the other. The number of pure enantiomeric fractions obtained by chiral continuous flow electrophoresis was found to be directly dependent on the enantiomeric mobility difference. For racemic chlorpheniramine separated in a betaine-acetic acid buffer at a total throughput of 5 mg/h, complete enantiomeric separation is shown to require a mobility difference of about 3 x 10(-9) m2/V s. Furthermore, compared to the previous investigations with hydroxypropyl-beta-cyclodextrin, CMCD was found to permit improved fractionation of methadone enantiomers. With a total racemic drug throughput of about 15 mg/h, continuous flow zone electrophoresis processing with CMCD as chiral selector is shown to have the potential of providing pure enantiomers on a mg/h scale. The results indicate that chiral capillary zone electrophoresis data can be employed as predictor for preparative scale chiral separations based upon continuous flow zone electrophoresis.     

Integrated electroosmotically-driven on-line sample purification system for nanoliter DNA sequencing by capillary electrophoresis

An integrated on-line system is developed for DNA sequencing at the nanoliter scale. The technique involves the use of a nanoreactor for small-volume cycle-sequencing reaction, capillary zone electrophoresis (CZE) for purification of the sequencing fragments, and capillary gel electrophoresis (CGE) for separation of the purified DNA fragments. The nanoreactor and CZE are integrated into one capillary, where a 100-nl dye-labeled terminator cycle-sequencing reaction is carried out followed by CZE to separate excess dye-labeled terminators from the sequencing fragments. On-line electrokinetic injection of the purified DNA fragments into the CGE system is accomplished at a small-volume tee connector by which the CZE capillary is interfaced to the CGE system. The utility of the system is demonstrated in sequencing nanoliter volumes of single-stranded DNA (M13mp18) and double-stranded DNA (pGEM). The use of voltage to drive both CZE and CGE makes it feasible for automation and future adaptation of the whole system to a microchip.     

Quantitative investigation of resolution increase of free-flow electrophoresis via simple interval sample injection and separation

Interval free‐flow zone electrophoresis (FFZE) has been used to suppress sample band broadening greatly hindering the development of free‐flow electrophoresis (FFE). However, there has been still no quantitative study on the resolution increase of interval FFZE. Herein, we tried to make a comparison between bandwidths in interval FFZE and continuous one. A commercial dye with methyl green and crystal violet was well chosen to show the bandwidth. The comparative experiments were conducted under the same sample loading of the model dye (viz. 3.49, 1.75, 1.17, and 0.88 mg/h), the same running time (viz. 5, 10, 15, and 20 min), and the same flux ratio between sample and background buffer (= 10.64 × 10^?3). Under the given conditions, the experiments demonstrated that (i) the band broadening was evidently caused by hydrodynamic factor in continuous mode, and (ii) the interval mode could clearly eliminate the hydrodynamic broadening existing in continuous mode, greatly increasing the resolution of dye separation. Finally, the interval FFZE was successfully used for the complete separation of two‐model antibiotics (herein pyoluteorin and phenazine‐1‐carboxylic acid coexisting in fermentation broth of a new strain Pseudomonas aeruginosa M18), demonstrating the feasibility of interval FFZE mode for separation of biomolecules.     

Combining capillary electrophoresis with mass spectrometry for applications in proteomics

Mass spectrometry (MS)-based proteomics is currently dominated by the analysis of peptides originating either from digestion of proteins separated by two-dimensional gel electrophoresis (2-DE) or from global digestion; the simple peptide mixtures obtained from digestion of gel-separated proteins do not usually require further separation, while the complex peptide mixtures obtained by global digestion are most frequently separated by chromatographic techniques. Capillary electrophoresis (CE) provides alternatives to 2-DE for protein separation and alternatives to chromatography for peptide separation. This review attempts to elucidate how the most promising CE modes, capillary zone electrophoresis (CZE) and capillary isoelectric focusing (CIEF), might best be applied to MS-based proteomics. CE-MS interfacing, mass analyzer performance, column coating to minimize analyte adsorption, and sample stacking for CZE are considered prior to examining numerous applications. Finally, multidimensional systems that incorporate CE techniques are examined; CZE often finds use as a fast, final dimension before ionization for MS, while CIEF, being an equilibrium technique, is well-suited to being the first dimension in automated fractionation systems.     

Capillary zone electrophoresis with electroosmotic flow controlled by external radial electric field.

A new way of regulation of electroosmotic flow (EOF) in capillary zone electrophoresis (CZE) by external electric field has been developed. A set of three high-voltage power supplies is used to form a radial electric field across the capillary wall. One power supply is applied in the usual way as a driving force of CZE and EOF to the ends of the inner capillary compartment dipped into the electrode vessels and filled with background electrolyte. Two power supplies are connected to the ends of the outer low-conductivity coating of the capillary which is formed by the dispersion of copolymer of aniline and p-phenylenediamine in polystyrene matrix. The difference between electric potentials on the outer capillary surface and inside the capillary determines the voltage of radial electric field across the capillary wall and affects the electrokinetic potential at the solid-liquid interface inside the capillary. The effect of magnitude and polarity of external radial electric field on the flow rate of EOF, on the migration times of charged analytes and on the separation efficiency and resolution of CZE separations of synthetic oligopeptides, diglycine, triglycine and octapeptide fragments of human insulin was evaluated. Through the EOF control by external electric field the dynamic effective length of the capillary was obtained and the speed of analysis and resolution of CZE separations of peptide analytes could be optimized.     

Capillary electrophoresis of cationic random coil peptide standards: effect of anionic ion-pairing reagents and comparison with reversed-phase chromatography

The present study compares a charge/hydrophobicity capillary electrophoresis (CE) approach to reversed-phase high-performance liquid chromatography (RP-HPLC) for the separation of three series of four synthetic, random coil peptide standards. Each series has peptides of the same positive charge (+1, +2 and +3 series) and length but differing in hydrophobicity. Complete resolution of the 12 peptides was achieved via a novel CE approach: a capillary zone electrophoresis (CZE) mode effected a separation of identically charged peptides; within each charged group of peptides, the addition of perfluorinated acid anionic ion-pairing reagents allowed resolution of the peptides through a mechanism based on peptide hydrophobicity which we have termed ioninteraction (II)-CZE. The peak capacity and peptide resolution of this CE approach was superior to that of RP-HPLC and stresses an important role for CE for peptide/proteomic applications.