蛋氨酸衍生物的合成及其缓蚀性能研究

本文合成了一种新型蛋氨酸衍生物酸洗缓蚀剂,运用红外光谱及核磁共振氢谱对其结构进行了鉴定。采用失重法和电化学法研究了在0. 5mol·L~(-1)硫酸介质中其对碳钢试片的缓蚀性能,并通过吸附等温模型对缓蚀机理进行初步的探讨。结果表明,蛋氨酸衍生物的缓蚀效率约为90%,整体用量适中,是一种有望得到良好应用的绿色缓蚀剂。电化学分析表明,蛋氨酸衍生物为混合型缓蚀剂,其通过增大金属表面的电荷转移电阻而降低电化学腐蚀速率。     

蛋氨酸衍生物缓蚀剂的合成与性能研究

以蛋氨酸为基础通过酰胺化反应合成一种新型的蛋氨酸衍生物缓蚀剂,应用极化曲线、电化学阻抗谱图研究蛋氨酸及其衍生物在3(wt)%Na Cl溶液中对N80碳钢的缓蚀作用,利用SEM观察添加缓蚀剂过后钢片表面的腐蚀形貌,并从分子结构上探讨了缓蚀剂在碳钢表面的作用机理。结果表明,蛋氨酸及其衍生物都属于阳极型缓蚀剂,且缓蚀率随着添加浓度增加而增加,添加250mg/L蛋氨酸衍生物在3(wt)%Na Cl溶液中对N80碳钢的缓蚀率达到86.94%。相同浓度条件下蛋氨酸衍生物的缓蚀率要高于蛋氨酸,其原因是蛋氨酸衍生物分子结构中增加了吸附位点和疏水长链。     

胡麻籽油咪唑啉类缓蚀剂的制备及其缓蚀性能

以胡麻籽油、羟乙基乙二胺为原料合成咪唑啉中间体,用苄基氯进行改性,得到阳离子咪唑啉衍生物。利用FT IR对合成产物进行了表征,用静态失重法、电化学极化曲线和FESEM对其缓蚀性能进行了评价,并考察了不同缓蚀剂浓度、腐蚀浸泡时间对缓蚀效果的影响,探讨了其在A30钢表面的吸附行为。结果表明,合成的缓蚀剂在盐酸体系中对A30钢有较好的缓蚀性能,在浓度为100mg/L时对低碳钢的缓蚀效率可达87%,并且其产物为阳离子型缓蚀剂,吸附满足Langmuir等温吸附方程。最后采用量子化学方法对其缓蚀剂的缓蚀机理进行了分析。     

胡麻籽油咪唑啉缓蚀剂的制备及其对A30钢的缓蚀效果

以胡麻籽油、羟乙基乙二胺为原料合成咪唑啉中间体,用苄基氯进行改性,得到阳离子咪唑啉衍生物。利用FT IR对合成产物进行了表征,用静态失重法、电化学极化曲线和FESEM对其缓蚀性能进行了评价,并考察了不同缓蚀剂浓度、腐蚀浸泡时间对缓蚀效果的影响,探讨了其在A30钢表面的吸附行为。结果表明,合成的缓蚀剂在盐酸体系中对A30钢有较好的缓蚀性能,在浓度为100mg/L时对低碳钢的缓蚀效率可达87%,并且其产物为阳离子型缓蚀剂,吸附满足Langmuir等温吸附方程。最后采用量子化学方法对其缓蚀剂的缓蚀机理进行了分析。     

具有表面活性的杂环缓蚀剂的合成及性能评价

以2-氨基苯并咪唑、氰尿酰氯、正己胺以及N,N-二甲基-1,3-丙二胺为原料,合成一种具有表面活性的杂环类缓蚀剂。通过测定含不同浓度缓蚀剂的盐酸溶液的表面张力来研究其表面性能。采用失重法和动电位极化及电化学阻抗谱方法考察了其与2-氨基苯并咪唑在盐酸介质中对碳钢的缓蚀行为,并通过扫描电镜观察了腐蚀碳钢试片的外貌形态。结果表明,表面活性以及多活性吸附中心的引入提高了缓蚀剂在碳钢表面的吸附能力,合成的缓蚀剂的缓蚀性能比2-氨基苯并咪唑有显著提高。在实验范围内,缓蚀剂的缓蚀效率随浓度增大而提高,电化学测试表明其为一种混合型缓蚀剂。     

五种氨基酸在HCl溶液中对铜的缓蚀作用

采用失重法、动电位极化曲线和电化学阻抗谱等方法,分别研究了1mmol/L L-蛋氨酸、L-半胱氨酸、L-精氨酸、L-赖氨酸和L-丙氨酸在0.5mol/L HCl溶液中对铜的缓蚀作用。实验结果表明,5种氨基酸均为阴极型缓蚀剂,其中L-赖氨酸缓蚀效果最好,缓蚀效率可达84.77%,同时也说明L-赖氨酸结构中游离的双氨基对于铜的缓蚀具有一定作用。     

碱性介质中POTAS和PDTAS对铜的缓蚀作用

合成了两种吡唑啉酮衍生物POTAS 和PDTAS, 并采用失重法和电化学方法研究了这两种吡唑啉酮衍生物对铜在5%(w)NaHCO3水溶液中的缓蚀性能和吸附行为. 结果表明, 在5%NaHCO3水溶液中这两种化合物对铜均有较好的缓蚀作用, 缓蚀效率大小顺序为POTAS>PDTAS. 并且POTAS与PDTAS均为混合型缓蚀剂. 两种化合物在铜表面的吸附均为单层吸附, 属于物理吸附.     

L-蛋氨酸对预腐蚀Q235碳钢缓蚀性能的分子动力学研究

采用失重法、密度泛函理论和分子动力学模拟研究了预腐蚀对L-蛋氨酸在60℃、1M的HCl溶液中对Q235碳钢的影响和缓蚀剂的缓蚀机理。结果表明:预腐蚀作用降低了L-蛋氨酸对Q235碳钢缓蚀作用,缓蚀率下降15%。密度泛函理论和分子动力学模拟结果表明,羧基上的氧原子带有明显的负电荷能够吸附到金属表面形成缓蚀剂膜,发挥缓蚀作用,为成膜缓蚀机理。L-蛋氨酸在没有预腐蚀的Q235碳钢表面吸附分子数为24时,缓蚀剂膜最致密。而L-蛋氨酸在预腐蚀后的Q235碳钢表面吸附时的吸附能显著降低,缓蚀剂在碳钢表面的分布密度也明显下降,这很好解释了预腐蚀作用降低了缓蚀剂缓蚀率的实验结果。本文的研究结果对缓蚀剂的研究和实际应用具有一定的指导意义。     

咪唑啉衍生物缓蚀剂对碳钢在CO2盐水中的缓蚀机理

采用极化曲线和交流阻抗研究新合成咪唑啉衍生物缓蚀剂对碳钢在饱和CO2盐水中的缓蚀性能和机理. 计算了缓蚀效率和热力学参数. 缓蚀效率随着缓蚀剂浓度增大而增加, 但随着温度增加先增加后降低. 咪唑啉衍生物在碳钢表面的吸附符合Langmuir等温式. 电化学结论由量子化学计算补充说明.     

羟基取代菲并咪唑衍生物对低碳钢的缓蚀性能

通过分子设计,增大邻菲罗啉平面结构,在不同位次引入-OH,合成2-(2-羟基苯基)-1H-咪唑[4,5-f][1,10]邻菲啰啉(2HIP)、2-(3-羟基苯基)-1H-咪唑[4,5-f][1,10]邻菲啰啉(3HIP)和2-(4-羟基苯基)-1H-咪唑[4,5-f][1,10]邻菲啰啉(4HIP)等三种羟基取代菲并咪唑衍生物。采用失重法、电化学法以及扫描电镜等研究其在1mol·L^-1HCl溶液中对低碳钢的缓蚀性能。三种缓蚀剂在低碳钢表面服从Langmuir吸附,缓蚀效率在实验浓度范围内均超过了90%,且4HIP具有最好的缓蚀效果,最高缓蚀效率为96.36%。DFT理论计算探讨了三种缓蚀剂分子结构与缓蚀剂效率关系,理论计算与实验结果具有一致性。     

Synthesis,characterization and corrosion inhibition efficiency of 2-(6-methylpyridin-2-yl)-1H-imidazo[4,5-f][1,10] phenanthroline on mild steel in sulphuric acid

Phenanthroline derivative, 2-(6-methylpyridin-2-yl)-1H-imidazo[4,5-f][1,10] phenanthroline (MIP) was synthesized and characterized by elemental analysis, FT-IR, ¹H NMR, ¹³C NMR, and single crystal X-ray diffraction study. MIP was evaluated as corrosion inhibitor for mild steel in 0.5 M H₂SO₄ solution using gravimetric and UV–Visible spectrophotometric methods at 303–333 K. Results obtained show that MIP acts as inhibitor for mild steel in H₂SO₄ solution. The inhibition efficiency was found to increase with increase in MIP concentration but decreased with temperature. Activation parameters and Gibbs free energy for the adsorption process using statistical physics were calculated and discussed. The UV–Visible absorption spectra of the solution containing the inhibitor after the immersion of mild steel specimen indicate the formation of a MIP-Fe complex.     

Inhibition effect of hexadecyl pyridinium bromide on the corrosion behavior of some austenitic stainless steels in H2SO4 solutions

The inhibition effect of hexadecyl pyridinium bromide (HDPB) as a cationic surfactant on the corrosion behavior of some Egyptian austenitic stainless steel SS 304L, SS 316H and SS 304H in 0.5 M H₂SO₄ solutions was investigated by using potentiodynamic polarization technique and electrochemical impedance spectroscopy (EIS). The results indicate that HDPB is a good inhibitor for the samples under investigation in 0.5 M H₂SO₄ solutions. In addition, the inhibition efficiency η% increases with the inhibitor concentration while decreases with the increasing temperature referring to physical adsorption. The adsorption of the inhibitor obeys a Temkin adsorption isotherm. Polarization curves show that HDPB is a mixed inhibitor in H₂SO₄ solutions. The results obtained from polarization and impedance measurements are in good agreement. Activation-free energies, enthalpies, and entropies for the inhibition process of HDPB were determined.     

Mild steel corrosion inhibition by acid extract of leaves of Hibiscus sabdariffa as a green corrosion inhibitor and sorption behavior

A new corrosion inhibitor, namely acid extract of leaves of Hibiscus sabdariffa, has been synthesized, and its inhibiting action on the corrosion of mild steel in acidic bath (1.2 N HCl and 1.2 N H₂SO₄) has been investigated by corrosion-monitoring techniques. The results of the present study show that this compound has decent inhibiting property for mild steel corrosion in 1.2 N H₂SO₄ than 1.2 N HCl. Four sorption isotherms are tested for the data, namely Langmuir, Frumkin, Florry–Huggins, and Langmuir–Freundlich isotherms; of these the Langmuir isotherm fits the data well having correlation coefficient over 0.99 in both the acid environments.     

Inhibitive action of ethanol extracts from Nauclea latifolia on the corrosion of mild steel in H2SO4 solutions and their adsorption characteristics

The inhibitive action of ethanol extracts from leaves (LV), bark (BK) and roots (RT) of Nauclea latifolia on mild steel corrosion in H₂SO₄ solutions at 30–60 °C was studied using weight loss and gasometric techniques. The extracts were found to inhibit the corrosion of mild steel in H₂SO₄ solutions and the inhibition efficiencies of the extracts follow the trend: RT > LV > BK. The inhibition efficiency increased with the extracts concentration but decreased with temperature rise. Physical adsorption of the phytochemical components of the plant on the metal surface is proposed as the mechanism of inhibition. The adsorption characteristics of the inhibitor were approximated by the thermodynamic-kinetic model of El-Awady et al.     

Enhancement inhibition efficiency of PBTCA depending on the inclusion complex with hydroxypropyl-β-cyclodextrin

For the first time, hydroxypropyl-β-cyclodextrin (HP-β-CD) has been brought in to include 2-phosphonobutane-1,2,4-tricarboxylic acid (PBTCA) in order to enhance inhibition efficiency of PBTCA, which leads a new approach to study oil–gas field corrosion inhibition in the process of acid treatment. Based on the host–guest inclusion reaction, the inclusion complex of PBTCA with HP-β-CD has been prepared in the laboratory. UV–Vis absorption spectrum was applied to study the inclusion behavior of PBTCA with HP-β-CD. The results revealed that PBTCA with HP-β-CD can form a 1:1 stoichiometry inclusion complex. The 1:1 inclusion complex synthesized by using lyophilization was further characterized by Fourier transform infrared spectroscopy. Besides, inhibition effect of the inclusion complex on the corrosion inhibition of Q235 carbon steel has been investigated in 0.1 M sulfuric acid (H₂SO₄) solution using potentiodynamic polarization, electrochemical impedance spectroscopy techniques and scanning electron microscopy (SEM). It was found that the presence of the inclusion complex better achieved the anti-corrosion property in aggressive medium than was the case with alone PBTCA and the highest inhibition efficiency of the inclusion complex over 90 % was obtained, which are suggestive of the active effect of the inclusion complex for improving inhibition efficiency of PBTCA. Meanwhile, the results obtained from SEM further showed that the inclusion complex acts as a more efficient corrosion inhibitor for Q235 carbon steel in H₂SO₄ medium.     

Effect of piperidones on hydrogen permeation and corrosion inhibition of mild steel in acidic solutions

The influence of 3-methyl-2,6-diphenyl piperidin-4-one (MDPO) and 2-phenyl decahydroquinoline-4-one (PDQO) synthesised in the laboratory on hydrogen permeation and corrosion inhibition of mild steel in 1N H₂SO₄ has been studied using weight loss and various electrochemical AC and DC corrosion-monitoring techniques. Both the compounds inhibit the corrosion of mild steel in H₂SO₄. Potentiodynamic polarisation studies clearly reveal that they behave predominantly as cathodic inhibitors. The extent of decrease in hydrogen permeation current through steel surfaces has been studied by the hydrogen electropermeation technique. Double layer capacitance (C _dl ) and charge transfer resistance (R _t ) values are derived from Nyquist plots obtained from AC impedance studies. The adsorption of these compounds on mild steel surfaces from H₂SO₄ obeys Temkin’s adsorption isotherm.     

Hydroclathrus clathratus marine alga as a green inhibitor of acid corrosion of mild steel

The corrosion inhibitive and adsorption behaviors of Hydroclathrus clathratus on mild steel in 1 M HCl and 1 M H₂SO₄ solutions at 303, 313 and 323 K were investigated by weight loss, electrochemical, and surface analysis techniques. The results show that H. clathratus acts as an inhibitor of corrosion of mild steel in acid media. The inhibition efficiency was found to increase with increase in inhibitor concentration but to decrease with rise in temperature, suggestive of physical adsorption. The adsorption of the inhibitor onto the mild steel surface was found to follow the Temkin adsorption isotherm. The inhibition mechanism was further corroborated by the results obtained from electrochemical methods. Scanning electron microscopy (SEM) and atomic force microscopy (AFM) analyses supported the inhibitive action of the alga against acid corrosion of mild steel.     

Inhibition of cold rolled steel corrosion in sulphuric acid solution by 2-mercapto-1-methylimidazole: Time and temperature effects treatments

2-Mercapto-1-methylimidazole (MMI) has been evaluated as a corrosion inhibitor for cold rolled steel in aerated 2 M H₂SO₄ by gravimetric method. The effect of MMI on the corrosion rate was determined at various immersions time and concentrations. The effect of the temperature on the corrosion behaviour with addition of different concentrations of MMI was studied in the temperature range 30–60 °C. The MMI acts as an effective corrosion inhibitor for cold rolled in sulphuric acid medium. The inhibition process is attributed to the formation of an adsorbed film of MMI on the metal surface which protects the metal against corrosion. The protection efficiency increased with increase in inhibitor concentration at various immersions time and decreased with increase in temperature. Adsorption of MMI on the cold rolled steel surface is found to obey the Langmuir adsorption isotherm. Some thermodynamic functions of dissolution and adsorption processes were also determined.     

Essential oil of Salvia aucheri mesatlantica as a green inhibitor for the corrosion of steel in 0.5 M H2SO4

Essential oil of aerial parts of Salvia aucheri Boiss. var. mesatlantica was obtained by hydrodistillation and analyzed by GC and GC/MS. The oil was predominated by camphor (49.59%). The inhibitory effect of this essential oil was estimated on the corrosion of steel in 0.5 M H₂SO₄ using electrochemical polarization and weight loss measurements. The corrosion rate of steel is decreased in the presence of natural oil. The inhibition efficiency was found to increase with oil content to attain 86.12% at 2 g/L. Polarization curves revealed that the oil of S. aucheri mesatlantica acts as mixed type inhibitor with a strong predominance of anodic character. The temperature effect on the corrosion behavior of steel in 0.5 M H₂SO₄ without and with the inhibitor at 2 g/L was studied in the temperature range from 303 to 343 K, the associated activation energy have been determined. The adsorption of oil on the steel surface was found to obey Langmuir’s adsorption isotherm.     

A study of synthesized Mannich base inhibition on mild steel corrosion in acid medium

1((Cyclohexylamino)methyl)urea Mannich base was synthesized and characterized using FT-IR, H¹NMR and C¹³NMR spectra and it was tested as a corrosion inhibitor for mild steel in 1?N HCl and 1?N H₂SO₄ solutions using potentiodynamic polarization and AC impedance techniques over the temperature range of 303?C333?K. The inhibition efficiency was increased with respect to concentration of inhibitor and temperature in 1?N HCl, whereas the inhibition efficiency was increased with respect to concentration of inhibitor and decreased with respect to temperature in 1?N H₂SO₄. Potentiodynamic polarization results revealed that the inhibitor acts as mixed type inhibitor. AC impedance study indicates that the corrosion of steel was mainly controlled by a charge transfer process. Surface analysis was carried out using SEM technique. The adsorption of inhibitor follows Langmuir adsorption isotherm. Activation and adsorption parameters were calculated to gain information about the inhibitive action mechanism.