不可压粘性流体浸入边界直接力法及软件实现

浸入边界法通过在N-S方程中施加体积力模拟不可滑移固壁边界及动边界,避免生成复杂贴体网格及动网格,极大地节省了网格建模时间及动网格计算消耗。本文提出一种新型附加体积力简化计算方法,将简化附加体积力以源项形式嵌入动量方程迭代中,通过用户自定义函数对CFD软件FLUENT二次开发,实现了浸入边界法和通用流体力学求解器的耦合计算。通过静止圆柱和动圆柱绕流数值模拟进行了验证,并探讨了插值函数对计算精度的影响。研究表明,通过引入浸入边界模型,能够提高计算效率,并实现结构网格背景下复杂边界和动边界的高效建模。     

一种投影浸入边界法的快速直接求解方法

根据投影浸入边界法分步投影求解的特点,同时针对压力泊松方程离散后的大型稀疏线性方程组是非奇异非对称的特点,结合开源函数库UMFPACK,在传递线性方程组的系数矩阵和右端向量时,采用函数库Eigen将系数矩阵的数据结构改写优化,大大降低了存储空间,实现对高维大型稀疏线性方程组的快速求解,同时求解保持良好的稳定性。本文首先利用一具有解析解的数值算例验证了求解泊松方程数值方法的准确性和网格依赖性,进而利用VC++编写投影浸入边界法的数值计算程序,以单圆柱绕流为基准数值算例,通过与其他文献和实验结果的对比,验证了投影浸入边界法数值计算结果的可靠性,并进一步分析了不同雷诺数下圆柱绕流的流场结构特征和尾涡结构的动态演化过程。     

一种模拟动边界绕流的锐利界面浸入边界法

为避免复杂贴体网格的更新和畸形对动边界流场计算效率、精度的影响,以充分掌握结构场的受力特性,采用一种改进的锐利界面（sharp-interface）浸入边界法模拟具有动边界绕流的流动问题。该方法将计算域中的固体视为流体,固体边界离散为若干个拉格朗日网格点,通过在界面单元处插值重构流动参数（速度）,将其直接作为流动求解器的边界条件,由此来反映固体边界的影响。即通过构造“虚拟点—受力点—垂足点”的计算结构,借助双线性插值得到虚拟点的速度,再通过强制满足固体边界的无滑移条件计算出受力点的速度,以此为边界条件,最终求解基于浸入边界法的耦合系统方程,实现复杂动边界的流动数值模拟。采用C++编写该浸入边界法的数值程序,以单圆柱绕流为验证算例,通过与文献和实验结果的对比,验证了该方法的准确性和可靠性。在此基础上,对主动运动椭圆柱绕流问题进行了精细计算,探讨了不同轴长比(A_R)、不同攻角($ \theta $)下的椭圆柱对尾涡结构分布特征和水力不稳定现象的影响。捕捉到了反对称S型、“P+S” Ⅰ型、“P+S” Ⅱ型尾涡脱落模态,漩涡强度、涡脱频率和升阻比随A_R和$ \theta $的变化规律,以及确定了升阻比临界攻角(25°)。

     

两种浸入式边界方法的比较

介绍两类不同的浸入式边界方法及其对它的改进. 然后采用均匀矩形交错网格和压力校正投影法,对不可压流场中的二维圆柱绕流进行了数值求解并对比了两类方法的精度.计算分析表明,连续显力法具有构造简单,适用性强的优点. 但离散隐力法在物面边界精度上要优于前者. 改进后,在二阶精度的离散格式下物面边界精度较低的显示力源法的精度有一定提高,同时发现,加密网格以提高数值精度的方法对于连续显力法并不总是有效.而同样格式下,离散隐力法具有更高精度,其中预测-校正离散隐力法可以在此基础上获得更小的计算误差和更快的收敛速度. 数值解与文献已有的数值和实验结果吻合得很好,表明边界算法及其程序是可靠和有效的.      

浸入式边界方法的研究及应用进展

本文总结了浸入式边界方法 (immersed bundary method, IB method)中的力源建模研究进展,并且对该方法在诸如生物体绕流及流固耦合等典型的复杂边界以及运动边界问题中的应用进行了介绍.边界精度低是IB方法主要特征之一,但该方法目前在计算气动声学等高精度计算中同样有所应用.最后本文对IB方法在处理高雷诺数流动问题上所面临的挑战以及目前研究进展和未来发展方向进行了介绍.     

浸入边界法及其应用

浸入边界法主要用于模拟存在复杂外形结构的流场的运动情况和处理各种动边界问题,目前已广泛应用于计算流体力学领域.浸入边界法既是数学建模方法又是数值离散方法,它将物体边界与流体的相互作用通过在流体运动方程中加体积力项来体现,并在数值计算中采用简单的笛卡尔网格,避免了按照物体边界形状生成贴体网格时所遇到的各种问题.浸入边界法分为连续力法和离散力法:连续力法主要用于处理弹性边界问题,它的力源项满足特定的力学关系式;离散力法主要用于处理固体界面问题,它的力源项由边界条件推导得到.着重阐述了浸入边界法的基本原理和数学构造,对目前已有的几种不同的浸入边界法做了简单地介绍,并给出了一些应用实例,最后提出了浸入边界法未来的发展方向.     

基于反馈力浸入边界法模拟复杂动边界流动

浸入边界法是模拟流固耦合的重要数值方法之一。本文采用反馈力浸入边界方法,对旋转圆柱和水轮机活动导叶旋转摆动绕流后的动边界流场进行数值模拟。其中,固体边界采用一系列离散的点近似代替,流体为不可压缩牛顿流体,使用笛卡尔自适应加密网格,利用有限差分法进行求解。固体对流场的作用通过构造适宜的反馈力函数实现。本文首先通过旋转圆柱绕流的计算结果同实验结果进行对比,吻合较好,验证了该计算方法的可靠性。然后针对水电站水力过渡过程中水轮机活动导叶旋转摆动绕流后的动边界流场进行数值模拟,得到导叶动态绕流后的流场分布特性和涡结构的演化特性。     

一种强耦合预估-校正浸入边界法

为克服传统浸入边界法的质量不守恒缺陷,提出了一种用于可压缩流固耦合问题的强耦合预估-校正浸入边界法。通过阐述一般流固耦合系统的矩阵表示,推导了流固耦合系统的强耦合Gauss-Seidel迭代格式,进一步导出预估-校正格式,提出了预估-校正浸入边界法。该方法使用无耦合边界模型对流体进行预估,将流固耦合边界视为自由面,固体原本占据的空间初始化为零质量的单元,允许流体自由穿过耦合边界。对于流体的计算,使用带有minmod限制器的二阶MUSCL有限体积格式和基于Zha-Bilgen分裂的AUSM+-up方法,配合三阶Runge-Kutta格式推进时间步。在校正步骤中,通过一组质量守恒的输运规则来实现输运过程。输运算法可概括为将边界内侧的流体进行标记,根据标记顺序以均匀方式分割和移动流体,产生一个指向边界外侧的流动,最后在边界附近施加速度校正保证无滑移条件。标记和输运算法避免了繁琐的对截断单元的几何处理,确保了算法易于实现。对于固体的计算,分别采用一阶差分格式和隐式动力学有限元格式求解刚体和线弹性体,并利用高斯积分获得固体表面的耦合力。使用预估-校正浸入边界法计算了一维问题和二维问题。在一维活塞问题中,获得了压力分布、相对质量历史和误差曲线,并与其他方法进行了对比。在二维的激波冲击平板问题中,获得了数值模拟纹影和平板结构的挠度历史,并与实验结果进行了对比。研究表明,该方法区别于传统的虚拟网格方法和截断单元方法,能够精确地维持流场的质量守恒并易于实现,且具有一阶收敛精度,能够较准确地预测激波绕射后的流场以及平板在激波作用下的挠度,为开发流固耦合算法提供了一种新的思路。     

基于浸入边界法的扑翼飞行数值模拟

本文提出了基于浸入边界法的扑翼鸟建模与仿真,首先检验了数值方法的精确性,而后对NACA 0012翼型的升沉运动与俯仰运动进行了研究,最后对三维扑翼的翅膀拍动时间非对称性进行了研究。结果表明：浸入边界法对拍动翼型的模拟能够很好地和文献结果吻合。升沉运动的推进能力由翼型前缘涡的大小和位置决定,升沉运动推进效率的峰值主要集中在0.3≤St≤0.4时。升沉运动耦合俯仰运动时,在俯仰角25°及相位差85°时,推进效率达到峰值。在三维模拟中,适当增加翅膀下拍速度,能提供更大的升力,同时耗能也更高。研究结果可以为微型扑翼飞行器的扑动参数设置提供参考。

     

紧致插值曲线方法在流向强迫振荡圆柱绕流中的应用

利用紧致插值曲线(constrained interpolation profile method in Zhejiang University, CIP-ZJU) 数学模型, 对低科勒冈-卡朋特(Keulegan–Carpenter) 数KC 静止流体中振荡圆柱以及雷诺数Re = 200 时流向强迫振荡圆柱绕流进行了数值模拟. 模型在直角坐标系统下建立, 采用紧致插值曲线方法作为流场的基本求解器离散了纳维-斯托克斯方程, 基于多相流的理论实现流固耦合同步求解, 利用浸入边界方法处理固体边界. 模拟结果与现有文献结果进行比较, 二者吻合情况较好, 验证了此方法对于计算复杂流动问题的可靠性.      

High-order ghost-point immersed boundary method for viscous compressible flows based on summation-by-parts operators

A high-order immersed boundary method is devised for the compressible Navier-Stokes equations by employing high-order summation-by-parts difference operators. The immersed boundaries are treated as sharp interfaces by enforcing the solid wall boundary conditions via flow variables at ghost points. Two different interpolation schemes are tested to compute values at the ghost points and a hybrid treatment is used. The first method provides the bilinearly interpolated flow variables at the image points of the corresponding ghost points and the second method applies the boundary condition at the immersed boundary by using the weighted least squares method with high-order polynomials. The approach is verified and validated for compressible flow past a circular cylinder at moderate Reynolds numbers. The tonal sound generated by vortex shedding from a circular cylinder is also investigated. In order to demonstrate the capability of the solver to handle complex geometries in practical cases, flow in a cross-section of a human upper airway is simulated.     

Moving immersed boundary method

A novel implicit immersed boundary method of high accuracy and efficiency is presented for the simulation of incompressible viscous flow over complex stationary or moving solid boundaries. A boundary force is often introduced in many immersed boundary methods to mimic the presence of solid boundary, such that the overall simulation can be performed on a simple Cartesian grid. The current method inherits this idea and considers the boundary force as a Lagrange multiplier to enforce the no‐slip constraint at the solid boundary, instead of applying constitutional relations for rigid bodies. Hence excessive constraint on the time step is circumvented, and the time step only depends on the discretization of fluid Navier‐Stokes equations, like the CFL condition in present work. To determine the boundary force, an additional moving force equation is derived. The dimension of this derived system is proportional to the number of Lagrangian points describing the solid boundaries, which makes the method very suitable for moving boundary problems since the time for matrix update and system solving is not significant. The force coefficient matrix is made symmetric and positive definite so that the conjugate gradient method can solve the system quickly. The proposed immersed boundary method is incorporated into the fluid solver with a second‐order accurate projection method as a plug‐in. The overall scheme is handled under an efficient fractional step framework, namely, prediction, forcing, and projection. Various simulations are performed to validate current method, and the results compare well with previous experimental and numerical studies.     

An immersed boundary method for incompressible flows using volume of body function

A simple and effective immersed boundary method using volume of body (VOB) function is implemented on unstructured Cartesian meshes. The flow solver is a second‐order accurate implicit pressure‐correction method for the incompressible Navier–Stokes equations. The domain inside the immersed body is viewed as being occupied by the same fluid as outside with a prescribed divergence‐free velocity field. Under this view a fluid–body interface is similar to a fluid–fluid interface encountered in the volume of fluid (VOF) method for the two‐fluid flow problems. The body can thus be identified by the VOB function similar to the VOF function. In fluid–body interface cells the velocity is obtained by a volume‐averaged mixture of body and fluid velocities. The pressure inside the immersed body satisfies the same pressure Poisson equation as outside. To enhance stability and convergence, multigrid methods are developed to solve the difference equations for both pressure and velocity. Various steady and unsteady flows with stationary and moving bodies are computed to validate and to demonstrate the capability of the current method. Copyright © 2005 John Wiley & Sons, Ltd.     

An immersed boundary method for simulation of inviscid compressible flows

In this paper, an immersed boundary method for simulating inviscid compressible flows governed by Euler equations is presented. All the mesh points are classified as interior computed points, immersed boundary points (interior points closest to the solid boundary), and exterior points that are blanked out of computation. The flow variables at an immersed boundary point are determined via the approximate form of solution in the direction normal to the wall boundary. The normal velocity is evaluated by applying the no‐penetration boundary condition, and therefore, the influence of solid wall in the inviscid flow is taken into account. The pressure is computed with the local simplified momentum equation, and the density and the tangential velocity are evaluated by using the constant‐entropy relation and the constant‐total‐enthalpy relation, respectively. With a local coordinate system, the present method has been extended easily to the three‐dimensional case. The present work is the first endeavor to extend the idea of hybrid Cartesian/immersed boundary approach to compressible inviscid flows. The tedious task of handling multi‐valued points can be eliminated, and the overshoot resulting from the extrapolation for the evaluation of flow variables at exterior points can also be avoided. In order to validate the present method, inviscid compressible flows over fixed and moving bodies have been simulated. All the obtained numerical results show good agreement with available data in the literature. Copyright © 2014 John Wiley & Sons, Ltd.     

Jump-reduced immersed boundary method for compressible flow

The main challenge of the immersed boundary approach is the proper enforcement of boundary conditions on the body interface without any spurious oscillations, which are induced by the nongrid-conforming boundary configuration. In this study, a new sharp interface ghost-cell immersed boundary method (IBM) is proposed for obtaining solutions near the immersed boundary with a high order of accuracy. The main idea is “jump-reduction” instead of jump-correction across the boundary interface by combining the ghost-cell method with the flow reconstruction method. In the proposed IBM, the unknown values at the three points, that is, boundary points, ghost cell, and flow field reconstruction point are solved simultaneously using equations formulated by the moving least-squares interpolation method. It is a hybrid of ghost-cell and flow reconstruction methods, correlated with interface values, which result in a reduced jump-discontinuity. In addition, a discontinuity-distinguishing algorithm is introduced so that the low-order method is applied only to the discontinuous or non smooth region, while the current high-order method is applied elsewhere. Reduced jump-discontinuity of the proposed IBM has been verified in both subsonic and supersonic flow using fundamental benchmark problems. We observed that the reduced jump-discontinuity does not hamper the mass conservation and shows even better conservation property than conventional methods due to the nonoscillatory performance in smooth regions. The numerical results further confirm the ability of the proposed IBM to solve complex flow physics with high-order accuracy and improved stability.     

Vortex‐in‐cell method combined with a boundary element method for incompressible viscous flow analysis

In this study, an immersed boundary vortex‐in‐cell (VIC) method for simulating the incompressible flow external to two‐dimensional and three‐dimensional bodies is presented. The vorticity transport equation, which is the governing equation of the VIC method, is represented in a Lagrangian form and solved by the vortex blob representation of the flow field. In the present scheme, the treatment of convection and diffusion is based on the classical fractional step algorithm. The rotational component of the velocity is obtained by solving Poisson's equation using an FFT method on a regular Cartesian grid, and the solenoidal component is determined from solving an integral equation using the panel method for the convection term, and the diffusion term is implemented by a particle strength exchange scheme. Both the no‐slip and no‐through flow conditions associated with the surface boundary condition are satisfied by diffusing vortex sheet and distributing singularities on the body, respectively. The present method is distinguished from other methods by the use of the panel method for the enforcement of the no‐through flow condition. The panel method completes making use of the immersed boundary nature inherent in the VIC method and can be also adopted for the calculation of the pressure field. The overall process is parallelized using message passing interface to manage the extensive computational load in the three‐dimensional flow simulations. Copyright © 2011 John Wiley & Sons, Ltd.     

Improvement of mass source/sink for an immersed boundary method

An improved immersed boundary method using a mass source/sink as well as momentum forcing is developed for simulating flows over or inside complex geometries. The present method is based on the Navier–Stokes solver adopting the fractional step method and a staggered Cartesian grid system. A more accurate formulation of the mass source/sink is derived by considering mass conservation of the virtual cells in the fluid crossed by the immersed boundary. Two flow problems (the decaying vortex problem and uniform flow past a circular cylinder) are used to validate the proposed formulation. The results indicate that the accuracy near the immersed boundary is improved by introducing the accurate mass source/sink. Copyright © 2006 John Wiley & Sons, Ltd.