表面活性剂和n型载流子对钴掺杂氧化锌薄膜铁磁性的双重调控（英文）

本文提出了一种利用表面活性剂钝化和电子载流子掺杂来调制钴掺杂氧化锌稀磁半导体薄膜固有铁磁性的"双重操纵效应"新方法.第一性原理计算表明,氢表面钝化作为薄膜表面Co-O-Co磁耦合的磁开关,可以控制掺杂钴原子的自旋极化.同时,电子载流子掺杂可以进一步用作类层状铁磁性媒介来调节薄膜内部原子层的铁磁性.该双重操纵效应揭示了n型钴掺杂氧化锌稀磁半导体薄膜的本质铁磁性来源,并且还有可能用作其他n型稀磁半导体氧化物薄膜增强铁磁性的替代策略.     

磁控溅射法制备钴掺杂氧化锌薄膜室温磁学性质

钴掺杂氧化锌是室温稀磁半导体的重要候选材料,其磁学特性和钴掺杂浓度、显微结构及光学性质密切相关。磁控溅射具有成本低、易于大面积沉积高质量薄膜等特点,是广受关注的稀磁半导体薄膜制备方法。利用磁控溅射方法制备了不同浓度的钴掺杂氧化锌薄膜,并对其显微结构、光学性质和磁学特性进行了系统分析。结果表明:当掺杂原子分数在8%以内时,钴掺杂氧化锌薄膜保持单一的铅锌矿晶体结构,钴元素完全溶解在氧化锌晶格之中;薄膜在可见光区域有很高的透射率,但在567, 615和659 nm处有明显吸收峰,这些吸收峰源于Co2+处于O2-形成的四面体晶体场中的特征d-d跃迁。磁学特性测试结果表明钴掺杂氧化锌薄膜具有室温铁磁性,且钴的掺杂浓度对薄膜的磁学特性有重要影响。结合薄膜结构、光学和电学性质分析,实验中观察到的室温铁磁性应源于钴掺杂氧化锌薄膜的本征属性,其铁磁耦合机理可由束缚磁极化子模型进行解释。     

磁控溅射法制备钴掺杂氧化锌薄膜室温磁学性质（英文）

钴掺杂氧化锌是室温稀磁半导体的重要候选材料,其磁学特性和钴掺杂浓度、显微结构及光学性质密切相关。磁控溅射具有成本低、易于大面积沉积高质量薄膜等特点,是广受关注的稀磁半导体薄膜制备方法。利用磁控溅射方法制备了不同浓度的钴掺杂氧化锌薄膜,并对其显微结构、光学性质和磁学特性进行了系统分析。结果表明:当掺杂原子分数在8%以内时,钴掺杂氧化锌薄膜保持单一的铅锌矿晶体结构,钴元素完全溶解在氧化锌晶格之中;薄膜在可见光区域有很高的透射率,但在567,615和659nm处有明显吸收峰,这些吸收峰源于Co2+处于O2-形成的四面体晶体场中的特征d-d跃迁。磁学特性测试结果表明钴掺杂氧化锌薄膜具有室温铁磁性,且钴的掺杂浓度对薄膜的磁学特性有重要影响。结合薄膜结构、光学和电学性质分析,实验中观察到的室温铁磁性应源于钴掺杂氧化锌薄膜的本征属性,其铁磁耦合机理可由束缚磁极化子模型进行解释。     

溶胶凝胶合成锰掺杂ZnO的室温磁性行为

通过溶胶凝胶自燃法合成锰掺杂氧化锌纳米晶体, 研究了Mn掺杂ZnO稀磁半导体(简称DMS)的性质．X射线衍射光谱表明,锰掺杂氧化锌保留纤锌矿型状氧化锌六角晶体结构．采用能量色散X射线能谱和扫描电子显微镜分别对成分和形态进行研究．温度依赖的电阻率显示了DMS的半导体材料行为．振动样品磁强计测定的室温磁性行为,揭示了锰掺杂氧化锌的铁磁性和反磁性特性.     

N型稀磁半导体Ge_(0.96–x) Bi_xFe_(0.04)Te薄膜的磁电性质研究

GeTe基稀磁半导体材料因具有可独立调控载流子浓度和磁性离子浓度的特性而受到广泛关注.本文利用脉冲激光沉积技术制备了该体系的单晶外延薄膜,并通过高价态Bi元素部分取代Ge元素的方法实现了材料中载流子类型从空穴向电子的转变,即制备出N型GeTe基稀磁半导体.测量结果表明,无论是室温还是低温下的Hall电阻曲线皆呈现负斜率,说明体系中载流子是电子;并且当Bi掺杂量达到32%时,电子浓度为10~(21)/cm~3.变温输运性质的测量证明体系的输运行为呈现半导体特征.通过测量低温10 K下的绝热磁化曲线,在高Bi掺杂体系中观测到了明显的铁磁行为,而低于32%Bi掺杂量的体系中未观察到.这一结果说明,高掺杂Bi的替代导致载流子浓度的增加,促进了载流子传递Ruderman-Kittel-Kasuya-Yoshida相互作用,使得分散的Fe-Fe之间产生磁耦合作用,进而形成铁磁有序态.     

Cu、Ag和Au掺杂AlN的电磁性质的第一性原理研究

采用基于密度泛函理论（DFT）的平面波超软赝势法,研究了Cu、Ag、Au掺杂AlN的晶格常数、磁矩、能带结构和态密度。电子结构表明,Cu、Ag、Au的掺杂使在带隙中引入了由杂质原子的d态与近邻N原子的2p态杂化而成的杂质带,都为p型掺杂,增强了体系的导电性。Cu掺杂AlN具有半金属铁磁性,半金属能隙为0.442eV,理论上可实现100%的自旋载流子注入;Ag掺杂AlN具有很弱的半金属铁磁性;而Au掺杂AlN不具有半金属铁磁性。因此,与Ag、Au相比,Cu更适合用来制作AlN基稀磁半导体。     

Gd掺杂ZnO纳米线磁耦合性质的第一性原理研究

本文利用基于密度泛函理论的第一性原理方法计算了钆(Gd)掺杂氧化锌(ZnO)纳米线的磁耦合特性. 讨论了两个Gd原子替换ZnO纳米线中不同位置Zn原子的各种可能情况. 计算发现, ZnO中掺杂的Gd原子处于相邻的位置时它们之间的相互作用是铁磁性的, 并且体系的铁磁性可以通过注入合适数目的电子来得到加强. 同时发现Gd掺杂ZnO纳米线后s-f耦合作用变得显著, 使得体系的铁磁性变得更加稳定, 这也是Gd掺杂ZnO纳米线呈现铁磁性的原因. 这些结果为实验上发现的Gd掺杂ZnO纳米线呈铁磁性提供了理论依据.     

过渡金属原子掺杂的锯齿型磷烯纳米带的磁电子学特性

利用基于密度泛函理论的第一性原理方法,研究了掺杂铁、钴和镍原子的锯齿型磷烯纳米带(ZPNR)的磁电子学特性.研究表明,掺杂和未掺杂ZPNR的结构都是稳定的.当处于非磁态时,未掺杂和掺杂钴原子的ZPNR为半导体,而掺杂铁或者镍原子的ZPNR为金属.自旋极化计算表明,未掺杂和掺杂钴原子的ZPNR无磁性,而掺杂铁或者镍原子的ZPNR有磁性,但只能表现出铁磁性.处于铁磁态时,掺杂铁原子的ZPNR为磁性半导体,而掺杂镍原子的ZPNR为磁性半金属.掺杂铁或者镍原子的ZPNR的磁性主要由杂质原子贡献,产生磁性的原因则是在ZPNR中存在未配对电子.掺杂位置对ZPNR的磁电子学特性有一定的影响.该研究对于发展基于磷烯纳米带的纳米电子器件具有重要意义.     

ZnCoO稀磁半导体的室温磁性

采用固相反应法，将ZnO和Co₂O₃粉末按不同的成分配比混合，制备了稀磁半导体Zn_1-xCo_xO (x=0.02,0.06,0.10)材料.并使用H₂气氛退火技术对样品进行了处理，得到了具有室温铁磁性的掺Co氧化锌稀磁半导体.利用全自动X射线衍射仪、X射线光电子能谱仪、高分辨透射电子显微镜和超导量子干涉器件磁强计对样品的结构、晶粒的尺寸、微观形貌以及磁性等进行了测量和标度. 关键词： 稀磁半导体 氧化锌 掺杂 固相反应法     

磁控溅射Cl掺杂CdTe薄膜的孪晶结构与电学性质

CdTe用作薄膜太阳能电池吸收层需要经过氯处理才能得到高的光电转换效率,其中Cl原子的作用机理仍然没有完全被理解.实验发现Cl原子主要偏聚在CdTe晶界处,对晶界有钝化作用,而有第一性原理计算认为Cl原子掺入CdTe晶格能够引入浅能级提高光电转换效率.为了验证Cl原子掺杂是否对CdTe的光电转换效率有益,本文通过磁控溅射制备了100 ppm(ppm=1/1000000)Cl原子掺杂的CdTe(CdTe:Cl)薄膜并研究了薄膜的晶体结构与电学性质,同时对比了正常氯处理的无掺杂CdTe薄膜与CdTe:Cl薄膜之间的性质区别.实验发现Cl原子掺杂会在CdTe:Cl中形成大量仅由几个原子层构成的孪晶,电子和空穴在CdTe:Cl薄膜中没有分离的传导通道,而在氯处理后的CdTe薄膜中电子沿晶界传导,空穴沿晶粒内部传导.磁控溅射沉积的CdTe:Cl多晶薄膜属于高阻材料,退火前载流子迁移率很低,退火后载流子浓度降低到本征数量级,电阻率提高.CdTe:Cl薄膜电池效率远低于正常氯处理的无掺杂CdTe薄膜电池效率.磁控溅射制备的非平衡重掺杂CdTe:Cl多晶薄膜不适合用作薄膜太阳能电池的吸收层.     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Femtosecond Transform-Limited Pulse Generation by Compensating for the Linear Chirp of SPM Spectra in Dispersion Shifted Fibers

A simple technique of pulse compression, based on the linear chirp compensation of self-phase modulation (SPM) spectra in dispersion shifted fibers, is demonstrated. The optimization procedure is carried out, for a short span of a single-mode fiber, using a parabolic law, which describes the behavior of the squared output pulse width versus the pump peak power in the case of Gaussian pulses. The experimental results give a minimum pulse duration of 233 fs, which is in good agreement with the model. Shorter and coherent pulses, down to 90 fs, have been obtained by inserting an interference filter at the optical output.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Sorting of bending magnets for the SSRF booster

The Shanghai Synchrotron Radiation Facility(SSRF)booster ring,a full energy injector for the storage ring,is deigned to accelerate the electron beam energy from 150MeV to 3.5GeV that demands high extraction efficiency at the extraction energy with low beam loss rate when electrons are ramping.Closed orbit distortion(COD)caused by bending magnet field uniformity errors which affects the machine performance harmfully could be effectively reduced by bending magnet location sorting.Considering the affections of random errors in measurement,both ideal sorting and realistic sorting are studied based on measured bending magnet field uniformity errors and one reasonable combination of bending magnets which can reduce the horizontal COD by a factor of 5is given as the final installation sequence of the booster bending magnets in this paper.     

Measurement of nonlinear coefficient of optical fiber based on small chirped soliton transmission

We measure the waveform and phase curves of short optical pulses before and after transmission over different lengths of fibers by use of the pulse analyzer with the frequency-resolved optical gating (FROG),and numerically simulate pulse evolution under the experimental conditions.The nonlinear coefficient of the fiber is given by comparing the experimental results with the numerical ones.Difference between the experiment and numerical simulation is analyzed.     

Resonance scattering of canonical elastic shells in absorbing fluid medium

Resonance scattering of elastic spherical shell and cylindrical shell while the surrounding fluid medium has absorption is studied. The normal mode solution derived using exact elastic theory and the separation of variables is still applicable. However, the scattering form function has to be modified for the absorbing medium, otherwise the unreasonable result would be obtained. The backscattering form function in the absorbing medium is redefined, and the form function of elastic spherical and cylindrical shell with vacuum or solid matter filled is calculated in various absorption conditions. The results show that the absorption of surrounding fluid leads to notable attenuation of the coincidence resonances in the mid-frequency, but it has a little influence on the low-frequency resonance scattering induced by the filler inside the shell.     

Single-beam self-referenced phase-sensitive surface plasmon resonance sensor with high detection resolution

A versatile and low-cost single-beam self-referenced phase-sensitive surface plasmon resonance(SPR)sensing system with ultra-high resolution performance is presented.The system exhibits a root-mean-square phase fluctuation of ±0.0028.over a period of 45 min.i.e.a resolution of±5.2×10-9 refractive index units.The enhanced performance has been achieved through the incorporation of three design elements:a true single-beam configuration enabling complete self-referencing so that only the phase change associated with SPR gets detected,a differential measurement scheme to eliminate spurious signals not related to the sensor response,and the elimination of retardation drifts by incorporating temperature stabilization in the liquid crystal phase modulato .Our design should bring the detection sensitivity of non-labeling SPR biosensing closer to that achievable by conventional fluorescence-based techniques.     

Influences of SiO2 protective layers and annealing on the laser-induced damage threshold of Ta2O5 films

Ta2O5 films are prepared on BK7 substrates with conventional electron beam evaporation deposition.The effects of SiO2 protective layers and annealing on the laser-induced damage threshold (LIDT) of the films are investigated.The results show that SiO2 protective layers exert little influence on the electric field intensity(EFI)distribution,microstructure and microdefect density but increase the absorption slightly.Annealing iS effective on decreasing the microdefect density and the absorption of the films.Both SiO2 protective layers and annealing are beneficial to the damage resistance of the films and the latter is more effective to improve the LIDT.Moreover,the maximal LIDT of Ta2O5 films is achieved by the combination of SiO2 protective layers and annealing.     

A stereo matching algorithm using multi-peak candidate matches and geometric constraints

Gray cross correlation matching technique is adopted to extract candidate matches with gray cross correla- tion coefficients less than some certain range of maximal correlation coefficient called multi-peak candidate matches. Multi-peak candidates are extracted corresponding to three closest feature points at first. The corresponding multi-peak candidate matches are used to construct the model polygon. Correspondence is determined based on the local geometric relations between the three feature points and the multi-peak candidates. The disparity test and the global consistency checkout are applied to eliminate the remaining ambiguous matches that are not removed by the local geometric relational test. Experimental results show that the proposed algorithm is feasible and accurate.