MHD flow and mass transfer of a upper-convected Maxwell fluid past a porous shrinking sheet with chemical reaction species

This article looks at the mass transfer of the steady two-dimensional magnetohydrodynamic (MHD) boundary layer flow of an upper-convected Maxwell (UCM) fluid past a porous shrinking sheet in the presence of chemical reaction. The resulting nonlinear partial differential equations are reduced to the system of nonlinear ordinary differential equations by means of similarity transformations. Expressions of velocity and the concentration fields are obtained using the homotopy analysis method (HAM). The convergence of the obtained series solutions is explicitly discussed. The influences of sundry parameters on the velocity and the concentration fields are made and discussed in detail. The values of the skin friction coefficient and the surface mass transfer for various interesting parameters are also tabulated.     

Mass transpiration on Newtonian flow over a porous stretching/shrinking sheet with slip

The motivation behind this article is to research the Newtonian liquid flow porous stretching/shrinking sheet utilizing a Brinkman model. The leading system of non-linear partial differential equations relating the article is mapped to standard ordinary differential equations via similarity transformations. Exact result is obtained for velocity. The effects of the Brinkman number or viscosity ratio, slip parameter, Darcy number, suction/injection (mass transpiration) parameter and the mass suction parameter on the velocity dispersion are introduced graphically and talked about. The outcomes have conceivable innovative applications in extrusion process and such other unified zones and in the fluid based frameworks including stretchable materials. Examination of fluid flow past a permeable stretching/shrinking sheet embedded in a non-Darcy permeable medium has been performed for a wide scope of various parameters. Exact solution has been obtained.     

The influence of heat transfer in an MHD second grade fluid film over an unsteady stretching sheet

The flow and heat transfer problem of a second grade fluid film over an unsteady stretching sheet is considered. The fluid is incompressible and electrically conducting in the presence of a uniform applied magnetic field. The series solutions of the governing boundary value problems are obtained by employing homotopy analysis method (HAM). The convergence of the developed solutions is discussed explicitly. The dependence of velocity and temperature profiles on various parameters is shown and discussed through graphs. The values of skin-friction coefficient, Nusselt number and free surface temperature are given in tabular form for various emerging parameters.     

Unsteady MHD flow and heat transfer near stagnation point over a stretching/shrinking sheet in porous medium filled with a nanofluid

In this article, the unsteady magnetohydrodynamic （MHD） stagnation point flow and heat transfer of a nanofluid over a stretching/shrinking sheet is investigated numerically. The similarity solution is used to reduce the governing system of partial differential equations to a set of nonlinear ordinary differential equations which are then solved numerically using the fourth-order Runge-Kutta method with shooting technique. The ambient fluid velocity, stretching/shrinking velocity of sheet, and the wall temperature are assumed to vary linearly with the distance from the stagnation point. To investigate the influence of various pertinent parameters, graphical results for the local Nusselt number, the skin friction coefficient, velocity profile, and temperature profile are presented for different values of the governing parameters for three types of nanoparticles, namely copper, alumina, and titania in the water-based fluid. It is found that the dual solution exists for the decelerating flow. Numerical results show that the extent of the dual solution domain increases with the increases of velocity ratio, magnetic parameter, and permeability parameter whereas it remains constant as the value of solid volume fraction of nanoparticles changes. Also, it is found that permeability parameter has a greater effect on the flow and heat transfer of a nanofluid than the magnetic parameter.     

Fluctuating hydromagnetic flow through a porous medium bounded by an oscillatory porous plate

The two-dimensional flow of an incompressible, viscous electrically conducting fluid through a porous medium bounded by an infinite porous plate and subject to a uniform external magnetic field is treated. The mean velocity, the fluctuating parts of the velocity, the transient velocity, the amplitude and the phase of the skin friction, and the wall temperature are shown graphically and followed by discussions.Notation x, y, z cartesian coordinates - density - p pressure - kinetic viscosity - u, v velocity components - electrical conductivity - K permeability of the porous medium - H ₀ applied magnetic field - B ₀ magnetic induction (=H ₀) - magnetic permeability - fraquency of fluctuations - t time - T temperature - T temperature at the boundary layer - k thermal conductivity - C _p specific heat - P Prandtl number - E Eckert number The authors remain thankful to the referee for his valuable comments for the improvement of the paper.     

Dual solutions in boundary layer flow of Maxwell fluid over a porous shrinking sheet

An analysis is carried out for dual solutions of the boundary layer flow of Maxwell fluid over a permeable shrinking sheet. In the investigation, a constant wall mass transfer is considered. With the help of similarity transformations, the governing partial differential equations（PDEs） are converted into a nonlinear self-similar ordinary differential equation（ODE）. For the numerical solution of transformed self-similar ODE, the shooting method is applied. The study reveals that the steady flow of Maxwell fluid is possible with a smaller amount of imposed mass suction compared with the viscous fluid flow. Dual solutions for the velocity distribution are obtained. Also, the increase of Deborah number reduces the boundary layer thickness for both solutions.     

MHD flow of nanofluids over an exponentially stretching sheet in a porous medium with convective boundary conditions

This article concentrates on the steady magnetohydrodynamic(MHD) flow of viscous nanofluid. The flow is caused by a permeable exponentially stretching surface. An incompressible fluid fills the porous space. A comparative study is made for the nanoparticles namely Copper(Cu), Silver(Ag), Alumina(Al2O3) and Titanium Oxide(TiO2). Water is treated as a base fluid. Convective type boundary conditions are employed in modeling the heat transfer process. The non-linear partial differential equations governing the flow are reduced to an ordinary differential equation by similarity transformations. The obtained equations are then solved for the development of series solutions. Convergence of the obtained series solutions is explicitly discussed. The effects of different parameters on the velocity and temperature profiles are shown and analyzed through graphs.     

Free convective flow through porous medium with variable permeability in slip flow regime with couple stress in the presence of heat source

The unsteady free convective MHDflow of a polar fluid through a porous medium with variable permeability in the presence of heat source bounded by an infinite horizontal porous plate in slip flow regime is analyzed. The transformed nondimensional equations are solved by a perturbation method. The obtained results are presented graphically to illustrate the influence of different physical parameters on the velocity profile, angular velocity profile, temperature profile, and concentration profile. Further the effect of variable permeability parameter on the velocity profile is investigated. Some special cases with their physical significance are discussed and compared with the existing published work.     

Simulation of flow through a two-dimensional random porous medium

The cellular automata approximation of two-dimensional hydrodynamics is used to model flow between randomly placed, partially overlapping circles. The flow resistance is first roughly proportional to the number of circles and then increases more strongly for higher numbers of such obstacles.     

Effects of chemical reactions on unsteady MHD free convection and mass transfer for flow past a hot vertical porous plate with heat generation/absorption through porous medium

The paper studies the effects of chemical reactions on unsteady MHD free convection and mass transfer flow of a viscous, incompressible, electrically-conducting fluid past an infinite hot vertical porous plate embedded in porous medium. Heat generation/absorption and viscous dissipation effects are included. The temperature of the plate is assumed to be spanwise cosinusoidally fluctuating with time. The governing equations are solved by perturbation technique. Numerical evaluation of the analytical results is performed. Graphical results for transient velocity and transient temperature profiles and tabulated results for skin-friction coefficient and Nusselt number are presented and discussed.     

Stability analysis of unsteady MHD stagnation point flow and heat transfer over a shrinking sheet in the presence of viscous dissipation

The unsteady MHD stagnation-point flow and heat transfer over a shrinking sheet was carried out. This study also was conducted in the existence of suction and viscous dissipation. In order to convert the governing partial differential equations to an ordinary differential equation, an appropriate similarity transformation was applied in this study. Then, the resulting equations are worked out by Bvp4c solver in Matlab. The impacts of the parameters involved in this study towards skin friction, Nusselt number, velocity and temperature profile are showed graphically and thoroughly discussed. Remarkably, there were dual solutions present in this study which made us continue deeper in performing the stability analysis. As expected, our study proves that the solution is stable only in the first one while not in the second solution.     

Rayleigh-Taylor instability of a composite medium with variable viscosity in hydromagnetics

The frictional effect of collisions of ionized with neutral atoms on the Rayleigh-Taylor instability of a composite medium with variable viscosity is considered in the presence of a horizontal magnetic field. It is found that the simultaneous presence of viscosity, magnetic field and collisions has a stabilizing effect and completely stabilizes the wave-number bandk _* wherek _*=(k _x ² V²L/g). The collisions have no effect as such on the stratification, i.e., stable configuration remains stable and unstable configuration remains unstable. However the growth rate, under either of conditions (25), decreases with the increase of collisions.     

Effects of variable properties on MHD heat and mass transfer flow near a stagnation point towards a stretching sheet in a porous medium with thermal radiation

The effect of variable viscosity and thermal conductivity on steady magnetohydrodynamic(MHD) heat and mass transfer flow of viscous and incompressible fluid near a stagnation point towards a permeable stretching sheet embedded in a porous medium are presented,taking into account thermal radiation and internal heat genberation/absorbtion.The stretching velocity and the ambient fluid velocity are assumed to vary linearly with the distance from the stagnation point.The Rosseland approximation is used to describe the radiative heat flux in the energy equation.The governing fundamental equations are first transformed into a system of ordinary differential equations using a scaling group of transformations and are solved numerically by using the fourth-order Rung-Kutta method with the shooting technique.A comparison with previously published work has been carried out and the results are found to be in good agreement.The results are analyzed for the effect of different physical parameters,such as the variable viscosity and thermal conductivity,the ratio of free stream velocity to stretching velocity,the magnetic field,the porosity,the radiation and suction/injection on the flow,and the heat and mass transfer characteristics.The results indicate that the inclusion of variable viscosity and thermal conductivity into the fluids of light and medium molecular weight is able to change the boundary-layer behavior for all values of the velocity ratio parameter λ except for λ = 1.In addition,the imposition of fluid suction increases both the rate of heat and mass transfer,whereas fluid injection shows the opposite effect.     

Effect of magnetic and boundary parameters on flow characteristics analysis of micropolar ferrofluid through the shrinking sheet with effective thermal conductivity

Ferrofluids have many applications in mechanical and electrical engineering. In this paper, characteristics of ferrofluid over a shrinking sheet with effective thermal conductivity model are studied by the homotopy perturbation method (HPM) and Akbari-Ganji's method (AGM). Also, the Finite Element Method (FEM) has been applied for numerical solution. The governing equations formulated by the Tiwari-Das model. It is supposed that base fluid and nanoparticles are water and Fe₃O₄respectively. Effect of related parameters of micro-rotation velocity and dimensionless velocity have taken for suction and injection of mass transfer parameter. Results show that the magnetic and boundary parameters, in contrast to the micro-rotation parameter, have the same impact on velocity. Moreover, a comparison has been made between the results of this study with other researchers shows the impressive accuracy and efficiency of these methods.     

Group solution for an unsteady non-Newtonian Hiemenz flow with variable fluid properties and suction/injection

The theoretic transformation group approach is applied to address the problem of unsteady boundary layer flow of a non-Newtonian fluid near a stagnation point with variable viscosity and thermal conductivity. The application of a twoparameter group method reduces the number of independent variables by two, and consequently the governing partial differential equations with the boundary conditions transformed into a system of ordinary differential equations with the appropriate corresponding conditions. Two systems of ordinary differential equations have been solved numerically using a fourth-order Runge–Kutta algorithm with a shooting technique. The effects of various parameters governing the problem are investigated.     

Analysis of magnetohydrodynamic flow of a fractional viscous fluid through a porous medium

The aim of this paper is to investigate the exact general solutions of the incompressible viscous fluid flow by using the time-fractional Caputo–Fabrizio derivative. The flow of the fluid is subject to the motion of a plane wall, embedded in a porous medium under the influence of magnetic field. The corresponding non-dimensional governing fractional differential equation with appropriate initial and boundary conditions is solved by means of integral transforms namely, Laplace and Fourier transforms. Solutions are expressed as a sum of steady and transient parts, for the sinusoidal oscillations of the plane wall. The influence of involved physical parameters are discussed graphically. Specifically, it has been observed that the effective permeability K_eff reduces the time taken to reach the steady state.     

Series solution of unsteady free convection flow with mass transfer along an accelerated vertical porous plate with suction

The problem of unsteady free convection flow is considered for the series solution (analytic solution). The flow is induced by an infinite vertical porous plate which is accelerated in its own plane. The series solution expressions for velocity field, temperature field and concentration distribution are presented. The influence of important parameters is seen on the velocity, temperature, concentration, skin friction coefficient and temperature gradient with the help of graphs and tables. Convergence is also properly checked for different values of the important parametes for velocity field, temperature and concentration with the help of ħ-curves.     

Variable fluid properties and variable heat flux effects on the flow and heat transfer in a non-Newtonian Maxwell fluid over an unsteady stretching sheet with slip velocity

The effects of variable fluid properties and variable heat flux on the flow and heat transfer of a non-Newtonian Maxwell fluid over an unsteady stretching sheet in the presence of slip velocity have been studied. The governing differential equations are transformed into a set of coupled non-linear ordinary differential equations and then solved with a numerical technique using appropriate boundary conditions for various physical parameters. The numerical solution for the governing non-linear boundary value problem is based on applying the fourth-order Runge-Kutta method coupled with the shooting technique over the entire range of physical parameters. The effects of various parameters like the viscosity parameter, thermal conductivity parameter, unsteadiness parameter, slip velocity parameter, the Deborah number, and the Prandtl number on the flow and temperature profiles as well as on the local skin-friction coefficient and the local Nusselt number are presented and discussed. Comparison of numerical results is made with the earlier published results under limiting cases.     

MHD natural convective flow through a porous medium in a square cavity filled with liquid gallium

This article contains a computational study of free convective flow through a square enclosure filled with liquid gallium saturated porous medium in the presence of a uniform inclined magnetic field. Lower boundary of enclosure is considered to be heated uniformly, upper horizontal boundary is taken insulated, left wall of the cavity is heated linearly, and right wall is heated linearly or taken cold. Navier–Stokes equations governing the flow problem are first exposed to penalty method to eliminate the pressure terms and then Galerkin FEM is employed to solve reduced equations. Grid independent results are achieved and shown in tabular form for numerous ranges of physical flow parameters. To ensure the accuracy of developed code, computed results are compared with those available in earlier studies through figures. It is found that the strength of streamlines circulation is increased due to increase in Darcy number while imposition of vertical magnetic field instead of horizontal magnetic field causes slow rate of increase in strength of streamlines circulation. Whereas, in the case of linearly heated right wall, the average Nusselt number is an increasing function of the Darcy number, and vertical magnetic field causes higher values for average Nusselt number as compared to horizontal magnetic field along bottom and side walls of cavity. Contrarily, in the case of cold right wall, the horizontal magnetic field results in higher values of average Nusselt number as compared to the vertical magnetic field case, and the average Nusselt number reduces as we move along lower and right boundary while increases along left wall with increase in distance.