Modeling of vertical external cavity semiconductor laser with MQW resonant structure

Numerical model is developed for modeling pulsed operation of a vertical external cavity semiconductor laser (VECSEL) with a resonant gain structure. Properties of optical modes for compound resonator formed by Bragg reflector, chip boundary and external spherical mirror were studied. For above threshold operation carrier density in each of quantum wells (QW) obeys non-linear diffusion equation with a source supplied by electron-hole pairs generated in barrier layers by pump radiation or fast electron beam. A new iteration procedure for round-trip operator evaluation was developed, which provides linear growth of computation time with the number of QWs. Results of numerical simulations are reported for a VECSEL comprising 25 QW in resonant configuration and the output spherical mirror with curvature radius 3 cm. Variation of distance to the external mirror is found to result in notable changes in power and optical quality of the output beam. The decisive role of gain and index non-linearity in these changes is identified. A range of values of distance to external mirror is found where iterative procedure does not converge. In another range, the resulting solution depends on the initial conditions for the iteration procedure.     

Instantaneous frequency measurement applied to semiconductor laser relaxation oscillations

The frequency of relaxation oscillations in the output power of lasers, particularly semiconductor lasers, is an important parameter which can be used to inform other fundamental laser variables, for comparison with expected theory, and to show the effect of external influences, such as optical feedback, by a change in value. Thus, precision measurement of the relaxation frequency is important. Instantaneous frequency measurement algorithms are applied to experimental semiconductor laser relaxation-oscillation signals to determine whether reliable values can be extracted, for an extended range of injection current, as compared to direct measurement and fast Fourier transform techniques. Improvement is achieved but, more importantly, the technique clearly shows when other oscillations, such as those due to packaging, connectorization and power supply, dominate the oscillatory component of the output power, at low injection currents. The work further supports the finding that only mid-range injection currents can be used for reliable precision relaxation oscillation frequency measurement.     

激光散斑的亚像素位移法计算及比较

根据激光散斑相关测量中采用的插值法、梯度算法和牛顿一拉夫森迭代法3种亚像素位移算法的特点,逐一在亚像素尺度计算出磁流体干燥过程中的同一激光散斑图的偏均值和标准差变化曲线。基于得到的偏差均值和标准差讨论了3种算法处理激光散斑图的特点,比较了3种算法处理散斑图的计算精度、稳定性和计算用时。结果显示,在小变形的亚像素位移测量时,梯度算法的精度较高,且较为稳定,计算效率也较牛顿一拉夫森算法快约9倍。因此,在进行小变形亚像素位移测量时,采用梯度算法计算激光散斑是有效的。     

Narrow stripe semiconductor laser for improved performance of optical communication systems

A narrow stripe (GaAl) As/GaAs laser is described, which has low source noise, high linearity and an expected life in excess of 20,000 hours. It has a short coherence length compared with a self-focused or refractive index guided laser giving very good modal noise performance. It is suitable for all digital systems and all but the most demanding amplitude modulated analogue systems.     

Linewidth analysis of 40-GHz passively mode-locked multi-mode semiconductor lasers

An experimental analysis on the quality of 40-GHz radio-frequency signals generated by various passively mode-locked semiconductor lasers is addressed. The analysis is performed considering the frequency linewidth of 40-GHz optically generated signals and the number of longitudinal modes selected by the cavity of each laser under study. Four of these devices are multi-quantum wells InAlGaAs Fabry-Pérot lasers. They have been engineered to exhibit a specific number of longitudinal modes: 4, 5, 10, and 22 modes, respectively. Another device under test is a bulk distributed Bragg reflector laser exhibiting 3 lasing modes. The last device under study is a quantum-dash Fabry-Pérot laser characterized by 40 lasing modes. From our experimental results it appears that, regardless the nature of the device cavity and active media, the strength of the passively mode-locked mechanism might be enhanced with the number of longitudinal modes oscillating into the laser cavity, allowing a reduction in the frequency linewidth.     

半导体激光器线宽压窄及其特性研究

本文从理论上分析了外腔半导体激光器的线宽压窄原理,用延时自外差法对外腔半导体激光器的线宽特性进行了测量研究,得到了线宽反比于激光器输出功率及外腔反馈率的实验结果.     

双光子聚合多次快速扫描机制与小线宽研究

采用自由基浓度起伏理论并考虑光镊集聚效应,理论研究了飞秒激光双光子聚合多次快速扫描的线宽问题。根据双光子光聚合过程中自由基浓度随时间变化的关系,考虑光镊力及自由扩散效应对自由基分布的影响,得到了多次快速扫描加工线宽的表达式。研究了多次扫描过程中产生自由基浓度随扫描次数的变化、双光子聚合加工不同扫描次数下加工线宽随激光功率的变化、多次扫描过程中间隔时间对于加工线宽的影响。多次扫描的线宽表达式可以直接回归至单次扫描的一般公式,且理论结果与文献中实验加工线宽相吻合,两者误差在2%。控制扫描间隔时间,减少自由基的向外扩散运动以及被树脂材料内大分子猝灭,使得活性自由基的分布更为集中,可以获得更小的加工线宽。研究结果为飞秒激光双光子更小线宽加工的研究提供了新的思路,为飞秒激光多次快速扫描加工提供了理论依据。     

Cavity linewidth narrowing by means of electromagnetically induced transparency in Rb with a longitudinal magnetic field

We demonstrate a method for further reducing the cavity linewidth by the application of a small longitudinal magnetic field on the Rb cell. Because of the magnetic field multiple electromagnetically induced transparen- cies （EITs） are observed. The center EIT linewidth is measured as a function of the magnetic field. By utilizing the center EIT we narrow the cavity linewidth to 2 MHz which is half of the cavity linewidth without magnetic field.     

考虑光镊效应的飞秒激光双光子加工线宽

采用自由基浓度起伏理论结合光镊集聚效应,理论研究了飞秒激光双光子加工的线宽问题。根据双光子光聚合过程中自由基浓度随时间变化的关系,考虑光镊效应对自由基分布范围的影响,得到了飞秒激光双光子加工线宽的表达式。研究了线宽随扫描速度与激光功率的变化关系,并讨论了不同光引发剂对线宽的影响。得到了以自由基浓度起伏为基础,并考虑光镊效应的双光子加工线宽表达式,该结果与实验结果相符。研究结果为飞秒激光双光子加工的研究提供了新的思路,为光镊集聚效应对线宽影响的实验研究提供了理论依据。     

Linewidth of a detuned single mode laser near threshold

The linewidth of a detuned single mode laser is calculated. Using the Fokker-Planck equation method, the problem is reduced to a nonhermitian eigenvalue problem. Numerical results near threshold and an approximate linewidth formula are given.     

Mode structure of a semiconductor laser subject to filtered optical feedback

We present an analytical study of the mode structure of a semiconductor laser subject to filtered optical feedback (FOF). First, we derive expressions for the solution sets that define the structure of the modes. We then employ continuation techniques to investigate how this structure changes as filter width, filter detuning and feedback phase are varied. This leads to a comprehensive picture of the FOF laser’s mode structure. In particular, we find an equation for the boundary of the parameter region in which one finds two separate components of modes.     

外光注入半导体激光器实现时钟分频

从理论和实验上研究了利用光注入半导体激光器对高重复速率光脉冲产生的周期振荡和时钟分频现象.结果表明，光注入半导体激光器引起的二倍周期振荡是使注入脉冲重复频率分频的直接原因.通过耦合速率方程，数值模拟了半导体激光器在外光注入时输出光的时间序列和功率谱，并且分析了激光腔内各种周期振荡的特征.研究表明，当注入光使半导体激光器出现稳定的二倍周期振荡，且注入光的重复频率为此振荡频率的二倍时，时钟分频即可产生实验中，采用重复频率为6.32GHz的光脉冲注入Fabry-Perot激光器，实现了3.16GHz时钟分频信号 关键词： 周期振荡 时钟分频 光谱侧带 光注入     

Quantum dot semiconductor laser with optoelectronic feedback

The optoelectronic feedback (OEF) in quantum dot semiconductor lasers (QD SLs) is studied theoretically where a model includes wetting layer ground state and excited state for QDs are included separating electrons and holes in their dynamics. Both positive and negative OEF are studied. The time series of photon density, the phase portraits of carriers in the states are studied. The parameters affecting OEF are examined where an excitability is seen. The QD SL is found to be more sensitive to the changes in time delay compared with other SLs and a complicated routs are seen in the behavior of QD SL.     

Multimode semiconductor laser with selective optical feedback

We study a multimode semiconductor laser subject to moderate selective optical feedback. The steady state of the laser is destabilized by a Hopf bifurcation and exhibits a period-doubling route to chaos. We also show the existence of a heteroclinic connection between a saddle node and an unstable focus that can be associated with experimentally observed multimode low-frequency fluctuations. This heteroclinic connection coexists with a chaotic attractor resulting from the period-doubling process.     

Linewidth of SG-DBR laser and its effect on DPSK transmission

In this paper the linewidth of widely tunable SG-DBR lasers has been investigated theoretically and experimentally. We demonstrate experimentally the importance of obtaining low linewidth operation for the application of SG-DBR laser with advanced modulation format transmission. This is achieved by choosing two sets of tuning currents for an SG-DBR laser that give the same wavelength channel and good SMSR, but different linewidths. When the laser is employed in a DPSK system only the operating point (the set of drive currents used to obtain specific output characteristics) that portrays low linewidth achieves error free transmission. This work shows that although calibration of tunable lasers is normally based on achieving sufficient SMSR and output power, it will be important to consider the linewidth parameter as these lasers begin to be used in more spectrally efficient WDM systems employing advanced modulation formats. The simulation results illustrate that the operating points which achieve narrow linewidth are correlated with those that exhibit low threshold current. This finding may be used for calibration of SG-DBR lasers to achieve minimum linewidth at each operating wavelength.     

Coherent addition of two dimensional array of fiber lasers

Configurations for efficient free space coherent addition of four separate fiber lasers arranged in two dimensional array are presented. They include compact and robust interferometric combiners that can be inserted either inside or outside the cavity of the combined lasers system. The results reveal that over 85% combining efficiency can be obtained.     

Polarization and coherence properties of a beam formed by superposition of a pair of stochastic electromagnetic beams

General expressions are derived for the spectral degree of polarization and for the spectral degree of coherence of a beam generated by the superposition of two stochastic electromagnetic beams. A method to calculate the mutual cross-spectral density matrix of the superposed beam is discussed, as well as experiments to determine it.     

An inverse problem in the theory of stochastic electromagnetic beams

The cross-spectral density matrix of an electromagnetic beam has been playing increasingly important role in studies of changes of spectra, of coherence and of polarization as the beam propagates. In this paper we derive solution to an inverse problem, which makes it possible to determine the cross-spectral density matrix of the beam in the source plane z=0, from the knowledge of the matrix in any cross-section z=z₀>0 in the half-space into which the beam propagates. We apply the result to the theory of so-called Stokes beams, which were introduced not long ago.     

Design study of an improved laser wire system for electron beam measurement

The laser wire (LW) method has been demonstrated to be an effective non-interceptive technique for measuring transverse profile and emittance of electron beams in colliders, storage rings and dumping rings. In this paper, we present an improved design of high repetition LW system for high average power free electron lasers (HAP FELs) and energy recovery linacs (ERLs). This improved LW utilizes the excess power of the photocathode drive laser, thus making itself much cheaper and simpler. The system main parameters are optimized with numerical calculations and Monte Carlo simulations, indicating that resolutions would be better than 100 μm and scanning time less than 1 minute. Status of the experiment preparation is also presented.