Preparation of visible-light responsive PF-codoped TiO2 nanotubes

Fabrication of PF-codoped TiO₂ nanotubes was carried out using a one-step electrochemical anodization process by tailoring the composition of the electrolyte with the aim of PF-codoping to extend the optical absorption of TiO₂ to the visible-light region. The as-prepared PF-codoped TiO₂ nanotubes were characterized by SEM, XPS, and UV-vis diffuse reflectance absorption spectra (DRS). The results showed that the tube diameter of the nanotubes was approximately 100 nm and the tube length was approximately 510 nm. The phosphorus and fluorine were successfully doped into TiO₂ nanotubes, as evidenced by XPS. Moreover, the PF-codoped samples displayed remarkably strong visible-light response.     

Near infrared spectroscopy of organic acids: comparing OH and CH oscillator frequencies and intensities

This work investigates the vibrational spectroscopy of a series of organic acids, CH₃(CH₂)_nCOOH (n = 1-5), previously unobserved in the IR and near-IR (2000-15 000 cm⁻¹). The work obtains frequencies and relative intensities for all OH and CH stretching transitions. Comparison of the frequencies and intensities of CH and OH stretching transitions reveal interesting trends in acid chain length that are discussed. Literature values for acetic acid (CH₃COOH) and formic acid (HCOOH) are used to gain a broader understanding for the spectroscopy of the organic acids CH₃(CH₂)_nCOOH. The observation of several combination bands involving the CH and OH stretching vibrations and possible rotational isomer and hot band transitions are reported.     

Ab initio studies of electronic spectra of the linear aluminum-bearing carbon chains AlC2nH (n = 1-5)

Geometries and stabilities of the linear aluminum-bearing carbon chains AlC_2nH (n = 1-5) in their ground states have been explored by the DFT-B3LYP and RCCSD(T) methods. Structures of the X¹Σ⁺ and 1¹Π electronic states have also been optimized by the CASSCF approach. The studies indicate that these species have single-triple bond alternate pattern, AlCCCC?CCH, and the electronic excitation from X¹Σ⁺ to 1¹Π leads to the shortening of the AlC bonds. The vertical excitation energies of the 1¹Π ← X¹Σ⁺ and 2¹Π ← X¹Σ⁺ transitions for AlC_2nH (n = 1-5) have been investigated by the CASPT2, EOM-CCSD, and TD-B3LYP levels of theory with the cc-pVTZ basis set, respectively. CASPT2-predicted 1¹Π ← X¹Σ⁺ transition energies are 3.57, 3.44, 3.33, 3.26, and 3.21 eV, respectively. For AlC₂H, our estimate agrees very well with the experimental value of 3.57 eV. In addition, the AlC bond dissociation energies and the exponential-decay curves for these vertical excitation energies are also discussed.     

Influence of thermal treatment of low dielectric constant SiOC(H) films using MTES/O2 deposited by PECVD

Low dielectric constant SiOC(H) films are deposited on p-type Si(100) substrates by plasma enhanced chemical vapor deposition (PECVD) using methyltriethoxysilane (MTES, C₇H₁₈O₃Si) and oxygen gas as precursors. The SiOC(H) films are deposited at room temperature, 100, 200, 300 and 400 °C and then annealed at 100, 200, 300 and 400 °C temperatures for 30 min in vacuum. The influence of deposition temperature and annealing on SiOC(H) films are investigated. Film thickness and refractive index are measured by field emission scanning electron microscopy and ellipsometry, respectively. Chemical bonding characteristics of as-deposited and annealed films are investigated by Fourier transform infrared (FTIR) spectroscopy in the absorbance mode. As more carbon atoms are incorporated into the SiOC(H) films, both film density and refractive index are decreased due to nano pore structure of the film. In the SiOC(H) film, CH₃ group as an end group is introduced into OSiO network, thereby reducing the density to decrease the dielectric constant thereof. The dielectric constant of SiOC(H) film is evaluated by C-V measurements using metal-insulator-semiconductor (MIS), Al/SiOC(H)/p-Si structure and it is found to be as low as 2.2 for annealed samples deposited at 400 °C.     

Structural study of thin films prepared from tungstate glass matrix by Raman and X-ray absorption spectroscopy

Thin films were prepared using glass precursors obtained in the ternary system NaPO₃BaF₂WO₃ and the binary system NaPO₃WO₃ with high concentrations of WO₃ (above 40% molar). Vitreous samples have been used as a target to prepare thin films. Such films were deposited using the electron beam evaporation method onto soda-lime glass substrates. Several structural characterizations were performed by Raman spectroscopy and X-ray Absorption Near Edge Spectroscopy (XANES) at the tungsten L_I and L_III absorption edges. XANES investigations showed that tungsten atoms are only sixfold coordinated (octahedral WO₆) and that these films are free of tungstate tetrahedral units (WO₄). In addition, Raman spectroscopy allowed identifying a break in the linear phosphate chains as the amount of WO₃ increases and the formation of POW bonds in the films network indicating the intermediary behavior of WO₆ octahedra in the film network. Based on XANES data, we suggested a new attribution of several Raman absorption bands which allowed identifying the presence of WO⁻ and WO terminal bonds and a progressive apparition of WOW bridging bonds for the most WO₃ concentrated samples (above 40% molar) attributed to the formation of WO₆ clusters.     

Low temperature catalytic performance of nanosized TiNiO for oxidative dehydrogenation of propane to propene

Nanosized TiNiO catalysts prepared by a modified sol-gel method have been investigated in the oxidative dehydrogenation of propane (ODP) to propene. At 300 °C the yield to propene of 12.1% was obtained on 9.1 wt.% TiNiO catalyst with the selectivity of 43%. The continued variety of lattice parameter and variation of chemical value of nickel and titanium ion on the surface indicates that there are strong interactions of TiO₂ and NiO. The decreased low temperature oxygen desorption and the weaker reducibility seems to be responsible for the decreased activity and enhanced selectivity of propane oxidative dehydrogenation over TiNiO catalysts.     

S180 cell growth on low ion energy plasma treated TiO2 thin films

X-ray photoelectron spectroscopy (XPS) was used to characterise the effects of low energy (<2 eV) argon ion plasma surface modification of TiO₂ thin films deposited by radio frequency (RF) magnetron sputter system. The low energy argon ion plasma surface modification of TiO₂ in a two-stage hybrid system had increased the proportion of surface states of TiO₂ as Ti³⁺. The proportion of carbon atoms as alcohol/ether (COX) was decreased with increase the RF power and carbon atoms as carbonyl (CO) functionality had increased for low RF power treatment. The proportion of C(O)OX functionality at the surface was decreased at low power and further increase in power has showed an increase in its relive proportion at the surface. The growth of S180 cells was observed and it seems that cells are uniformly spreads on tissue culture polystyrene surface and untreated TiO₂ surfaces whereas small-localised cell free area can be seen on plasma treated TiO₂ surfaces which may be due to decrease in C(O)OX, increase in CO and active sites at the surface. A relatively large variation in the surface functionalities with no change in the surface roughness was achieved by different RF plasma treatments of TiO₂ surface whereas no significant change in S180 cell growth with different plasma treatments. This may be because cell growth on TiO₂ was mainly influenced by nano-surface characteristics of oxide films rather than surface chemistry.     

Effect of oxidation on the optical and surface properties of AlGaN

The chemical properties of Al_xGa_1−xN surfaces exposed to air for different time periods are investigated by atomic force microscopy (AFM), photoluminescence (PL) measurement and X-ray photoelectron spectroscopy (XPS). PL and AFM results show that Al_xGa_1−xN samples exhibit different surface characteristics for different air-exposure times and Al contents. The XPS spectra of the Al 2p and Ga 2p core levels indicate that the peaks shifted slightly, from an AlN to an AlO bond and from a GaN to a GaO bond. All of these results show that the epilayer surface contains a large amount of Ga and Al oxides.     

Improvement of photoluminescence properties of porous silicon by silica passivation

Porous silicon (PS) was passivated by silica film using a sol-gel method; the photoluminescence (PL) properties were significantly improved; namely, PL intensity and stability increased and PL peak shifted to shorter wavelength. Scanning electron microscope (SEM) and Fourier transformed infrared spectroscope (FTIR) results indicated that silica passivation produced a compact film on the PS surface and modified the surface state of PS. The number of stable surface bonds (HSiO₃, HSiSiO₂ and H₂SiO₂) increased due to the oxidation of SiH back-bonds during the gelation process, and thus the PL intensity and stability were improved. Moreover, the blue-shift of PL peak was determined due to the increase in the ratio of SiO/SiH.     

Asymmetric surface modification of poly(ethylene terephthalate) film by CF4 plasma immersion

Poly(ethylene terephthalate) (PET) films were treated with CF₄ plasma immersion. The samples were processed at different RF powers and treatment time. The surface modification of PET films was evaluated by water contact angle (CA), X-ray photoelectron spectroscopy (XPS) and atomic force microscope (AFM). Decrease in contact angle of both sides of PET films was observed under mild treatment conditions. However, as raising treatment power and/or time, the change in contact angle between the two sides of PET films was different. The relatively hydrophobic and hydrophilic surfaces were being in situ formed on the two sides of PET films, respectively. And the extreme values of water contact angle reached 108.63 and 7.56°, respectively. XPS analyses revealed that there was a substantial incorporation of fluorine and/or oxygen atoms in both side surfaces. The relative chemical composition of the C (ls) spectra's showed the incorporation of non-polar fluorine-based functionalities (i.e. CFCF_n, CF₂ or CF₃ groups) and polar oxygen-based functionalities (i.e. COOH or OH groups) in the surfaces. Correlation between the plasma parameters and the surface modification of PET films is also discussed.     

Chlorine nuclear quadrupole coupling in chlorodifluoroacetyl chloride: Theory and experiment

A potential energy scan of chlorodifluoroacetyl chloride, CF₂ClC(O)Cl, at the MP2/6-311+G(d) level of theory predicts stable gauche and trans conformers, with E_gauche<E_trans. Ab initio calculations were made of approximate equilibrium structures of these and, on these structures, calculations were made of ³⁵Cl and ³⁷Cl nuclear quadrupole coupling constant tensors. Coupling constants here predicted, as well as rotational constants and molecular dipole moments, are applied to aid analyses of experimental microwave spectra. Chirped pulse Fourier transform microwave spectroscopy has been used to rapidly record the rotational spectra of four isotopologues of the title molecule, CClF₂C(O)Cl, namely ³⁵Cl³⁵Cl, ³⁵Cl³⁷Cl, ³⁷Cl³⁵Cl, and ³⁷Cl³⁷Cl. Only the gauche conformer was observed under the experimental conditions. For the four isotopologues a total of 464, 219, 197, and 77 transitions have been recorded, respectively. With the exception of the ³⁷Cl³⁷Cl isotopologue sufficient data was available to determine all Cl quadrupole coupling tensors. Comparisons between the theoretical and experimental results are made.     

X-ray photoelectron spectroscopy study of cubic boron nitride single crystals grown under high pressure and high temperature

The defects, impurities and their bonding states of unintentionally doped cubic boron nitride (cBN) single crystals were investigated by X-ray photoelectron spectroscopy (XPS). The results indicate that nitrogen vacancy (V_N) is the main native defect of the cBN crystals since the atomic ratio of B:N is always larger than 1 before Ar ion sputtering. After sputter cleaning, around 6 at% carbon, which probably comes from the growth chamber, remains in the samples as the main impurity. Carbon can substitute nitrogen lattice site and form the bonding states of CBN or CB, which can be verified by the XPS spectra of C1s, B1s and N1s. The C impurity (acceptor) and N vacancy (donor) can compose the donor-acceptor complex to affect the electrical and optical properties of cBN crystals.     

Effect of phase structures on the formation rate of hydroxyl radicals on the surface of TiO2

To study the relationship between the phase structures of TiO₂ and the photoinduced hydroxyl radicals (OH), TiO₂ nanocrystallines were synthesized by a hydrolysis-precipitate method using tetrabutylorthotitanate (TBOT) as precursor, and then calcined at 450, 600, 700, 800 and 900 °C for 2 h, respectively. The calcined samples were characterized by X-ray diffraction and N₂ sorption. The formation rate of OH on the surface of UV-illuminated TiO₂ was detected by the photoluminescence (PL) technique using terephthalic acid as a probe molecule. The results show that with increasing calcined temperatures, the amorphous (Am) TiO₂ precursor begins to turn into anatase (A) at 450 °C and rutile (R) phase appears at 600 °C, which is completely turned into the rutile phase at 900 °C. The BET specific surface areas of the catalyst decrease as the calcined temperatures increase. TiO₂ sample calcined at 600 °C, with a mixed phase of anatase and rutile, shows the highestOH formation rate, and the order of the OH formation rate is as follows: A+R>A>R>Am. Phase structures of TiO₂ play a more important role than specific surface areas in the OH formation rate. Two phase structure of anatase and rutile with a proper ratio is beneficial to the OH formation due to decrease of the combination rate of photo-generated electrons and holes. Our experimental result implies that the mixed phase of anatase and rutile can markedly enhance the photocatalytic activity of TiO₂.     

Modification of wetting properties of CR39 by plasma source ion implantation

Plasma source ion implantation (PSII), a hybrid implantation technique between ion beams and immersion plasmas has been used to modify CR39 surfaces for improved wettability providing both advancing (θ_a) and receding (θ_r) contact angles below 5°. The modifications brought to the polymer surface structure have been characterized by X-ray photoelectron spectroscopy (XPS) and its combination with chemical derivatization (CD-XPS). Oxygen desorption has been observed in spite of the very hydrophilic surfaces. C_1s XPS peak has been displaced toward greater energies, while the opposite has been found for O_1s, both involving new components and strong modifications after ion implantation treatment. Strong evidences about the formation of new chemical functions, like OOH, COOH and CC, have been found and have provided an explanation for the increased wettability.     

Modification of H-terminated Ge surface in hydrochloric acid

Various amounts of H-termination on a Ge surface were prepared by dipping a Ge wafer in differentially diluted hydrofluoric acid solutions for different periods of time. Formation of GeH_x in hydrofluoric acid and its disappearance in hydrochloric acid (HCl) were directly measured by using multiple internal reflection Fourier transform infrared spectroscopy (MIR FT-IR). Peak intensity of GeH_x vibration mode was increased with diluted hydrofluoric acid (DHF) treatment time and the concentration of HF solution. Therefore, it is suggested that microroughness of a Ge surface changes depending on the concentration of HF. Peak intensity of GeH_x vibration mode was reduced when the GeH_x surface was treated in HCl solution. With an increase in HCl treatment time, peak intensity of GeH_x vibration mode was reduced. Ge surfaces treated in a more diluted HF solution were barely modified, because it was thought to have fewer kink sites, dihydrides and trihydrides.     

Anharmonic force field and equilibrium structure of nitric acid

The quadratic, cubic and semi-diagonal quartic force field of nitric acid has been calculated at the CCSD(T) level of theory employing a basis set of triple-ζ quality. A semi-experimental equilibrium structure has been derived from experimental ground state rotational constants and rovibrational interaction parameters calculated from the ab initio force field. It is found that the A and B semi-experimental equilibrium rotational constants of the ¹⁸O isotopologues (for which the rotation of principal axes is large) cannot be accurately reproduced. This problem is discussed and a remedy is proposed. Finally, the semi-experimental structure is in agreement with the ab initio structure calculated at the CCSD(T) level of theory using a basis set of at least quadruple-ζ quality and a core correlation correction, except for the long NO single bond for which the CCSD(T) value is too short due to inadequate treatment of electron correlation. The empirical structures are also determined and their accuracy is discussed. The best equilibrium structure is: r_e(NO_syn) = 1.209(1) Å, r_e(NO_anti) = 1.194(1) Å, r_e(NO) = 1.397(1) Å, r_e(OH) = 0.968(1) Å, ∠(ONO_syn) = 115.8(1)°, ∠(ONO_anti) = 114.2(1)° and ∠(NOH) = 102.2(1)°.     

Effect of contact interface configuration on electronic transport in (C20)2-based molecular junctions

Using first-principles calculations, we study the electronic transport properties in Au(C₂₀)₂Au molecular junctions with different contact interface configurations: point contact and bond contact. We observe that the transmission through the bond contact is considerably higher than that of point contact. Furthermore, the I-V characteristics are rather different. For the bond contact, we get a metallic behavior followed by a varistor-type behavior. While as for the point contact, the current increases very slowly in a nonlinear way and is one order of magnitude smaller than that of bond contact. We attribute these obvious differences to the distinct contact configurations.     

The surface modification of nanoporous SiOx thin films with a monofunctional organosilane

The surfaces of nanostructured, porous SiO_x/Si (air-oxidized Si) and SiO_x thin films, deposited by excimer laser ablation in He and He + O₂ gas ambients, respectively, have been modified by the deposition of a monofunctional organosilane. They were characterized using photoacoustic Fourier-transform infrared (FTIR) X-ray photoelectron (XPS) spectroscopies, and field-emission scanning electron microscopy (FESEM). Photoacoustic FTIR analysis indicates that the organosilane has hydrolyzed to form a silanol, which has chemically reacted with SiO_x through its surface silanol (SiOH) group, to form siloxane (SiOSi) structures. An enhanced IR spectral signal is found, due to the expansion and contraction of both the pores of the solid and the gas within them.     

Magnesia formed on calcination of Mg(OH)2 prepared from natural bischofite

Calcination of magnesium hydroxide, which was prepared from natural bischofite MgCl₂·6H₂O, leading to dehydration 2(MgOH) → MgOMg + H₂O, is accompanied by transition of phase not only to MgO but also to MgO_x at x < 1 (assigned to Mg₄O₃) at moderate temperatures. At higher temperatures, MgO_x is completely transformed into MgO. Magnesium hydroxide and oxide heated at different temperatures were studied using the TEM, XRD, IR, PCS, TG-DTA, nitrogen and argon adsorption methods. The electronic structure of MgO and Mg₄O₃ was studied using the ab initio quantum chemical method with periodic conditions. According to TEM images, the morphology of particles changing from Mg(OH)₂ laminae to aggregates of interpenetrated MgO cubelets and foils depend strongly on the calcination temperature. Significant changes in surface area are observed mainly at 325-470 °C on desorption of a major portion of eliminated water corresponding to 28.4 wt.% at its total amount of 30.9 wt.%. Pore size distribution (PSD) is sensitive to treatment conditions and the main PSD peaks shift towards larger pore size with elevating temperature. The characteristics of the surface hydroxyls as well as of the bulk MgO bonds depend on heating conditions, as noticeable changes are observed in the XRD patterns and the IR spectra of the samples undergoing the mentioned transformation of phase Mg(OH)₂ → MgO_x → MgO.