Concise synthesis of quinazoline alkaloids, luotonins A and B, and rutaecarpine

The total synthesis of luotonin A was achieved in excellent yield by using a Pd-assisted biaryl coupling reaction of N-(bromoquinolinyl)methylquinazolinone with Cy₃P and KOAc. The successive treatment of luotonin A with NBS and aq. AgNO₃ gave luotonin B in good yield. Although the Pd-assisted coupling reaction of N-(2-bromoindolyl)ethylquinazolinone with Cy₃P and KOAc yielded rutaecarpine in poor yield, N-acetate under the same reaction conditions yielded the desired rutaecarpine directly in excellent yield.     

On the mechanism of Pd(0)-catalyzed coupling of propargylic carbonates with N-tosylhydrazones: density functional theory survey

In this article, we have theoretically investigated the possible reaction mechanisms for Pd(0)-catalyzed coupling of propargylic carbonates with N-tosylhydrazones. The ωb97X-D method and C-PCM solvent model are used to describe the reaction processes. After the formation of allenylpalladium through C–O bond cleavage from propargylic carbonates, both decarboxylation and ligand exchange processes are explored. Then, depending on different conditions, we considered three possible types of reaction mechanisms, carbene insertion triggered by N₂ release, C–C coupling reactions without N₂ release, and C–C coupling reactions via the out-sphere attack of diazo compound. Our results indicate that it is favorable to undergo the carbene insertion into allenylpalladium after ligand exchange with diazo compound, which is partially agreement with the experimental suggestions. Although the decarboxylation is more difficult than ligand exchange, the reaction rate could be limited by Pd-catalyzed N₂ dissociation from diazo compound. Additionally, it should be essential to select DFT-D method to describe this reaction.     

Syntheses of amides via iodine-catalyzed multiple sp~3 C–H bonds oxidation of methylarenes and sequential coupling with N,N-dialkylformamides

<正>~~     

Pd2dba3/P(i-BuNCH2CH2)3N: a highly efficient catalyst for the one-pot synthesis of trans-4-N,N-diarylaminostilbenes and N,N-diarylaminostyrenes

A Pd₂dba₃/P(i-BuNCH₂CH₂)₃N catalyzed one-pot synthesis of unsymmetrically substituted trans-4-N,N-diarylaminostilbenes and both symmetrically and unsymmetrically substituted N,N-diarylaminostyrene derivatives is reported. The procedure involves two or more palladium catalyzed sequential coupling reactions (an amination and an inter-molecular Heck reaction) in one-pot using the same catalyst system with two different aryl halides, including aryl chlorides and hetero aryl halides as the coupling partners.     

Regioselective synthesis of 2,3-disubstituted 1-alkyl pyrrolo[2,3-b] quinoxalines through palladium-catalyzed Heck reaction of chalcones and evaluation of their anti-bacterial activities

The regioselective synthesis of 1-alkyl-2-aryl-3-acyl pyrrolo[2,3-b]quinoxalines through palladium-catalyzed Heck coupling reaction/heteroannulation was reported. The reaction of N-alkyl/benzyl-3-chloroquinoxaline-2-amines with chalcones catalyzed by Pd(OAc)₂ in the presence of KO^tBu, as the base, in DMSO afforded the desired products in good-to-high yields. The MIC and MBC determinations revealed that these compounds could be used in the future research works for the development of antibiotics.     

One-pot synthesis of imidazolines from aldehydes: detailed study about solvents and substrates

Imidazolines were prepared in one-pot operation from aldehydes and diamines through oxidation of aminal intermediates by NBS. This method could be applied to various aromatic and aliphatic aldehydes and N-nonsubstituted and N-monosubstituted 1,2-diamines. Furthermore, it was found that CH₂Cl₂ could be altered to TBME, a more environmentally friendly solvent, in the reaction using N-nonsubstituted 1,2-diamines. The reaction conditions were very mild and chemoselective.     

Efficient and eco-friendly process for the synthesis of N-substituted 4-methylene-2-oxazolidinones in ionic liquids

The carbonylation of amines with propargylic alcohol using CO₂ as carbonyl source to yield N-substituted 4-methylene-2-oxazolidinones could efficiently proceed in ionic liquids, and various 4-methylene oxazolidinones with high yields could be obtained under relatively mild conditions. This result showed that ionic liquid might be an effective catalyst and reaction medium for the activation of CO₂, which also offered a new way to the chemical fixation of CO₂.     

Selective coupling of carbon dioxide and epoxystyrene via salicylaldimine-, thiophenaldimine-, and quinolinaldimine-iron(II), iron(III), chromium(III), and cobalt(III)/Lewis base catalysts

A series of chromium(III)-, cobalt(III)-, and iron(III)-based complexes of the general formula [(N∩O)₂MCl] (1–7) (N∩O: N-salicylidene(R)amine, R = 1-naphthyl or cyclohexyl) have been applied as catalysts for the coupling reaction of carbon dioxide and epoxystyrene (styrene oxide) in the presence of tetrabutylammonium bromide (Bu₄NBr) as a cocatalyst. The reactions were carried out under relatively low pressure and solvent-free conditions. In addition, iron complexes (8–10) containing the ligands, N′-(thiophene-2-methylene)benzene-1,2-diamine, (8), N′-(quinoline-2-methylene)benzene-1,2-diamine (9), and sodium N-(4-sulfonato-salicylidene)-1,2-phenylenediamine (10) were also utilized for the catalytic reaction. The influence of metal center, ligand, temperature, and reaction time on the coupling reaction was investigated. The catalyst systems proved to be selective in the coupling reaction of CO₂ and styrene oxide, resulting in cyclic styrene carbonate. In general, the iron(III)- and cobalt(III)-based catalysts bearing the aromatic 1-naphthyl terminal groups showed the highest catalytic activity under similar reaction conditions.     

Facile synthesis of fluorinated α-imino alkynes by the coupling reaction of imidoyl iodides with terminal alkynes

A series of N-arylbromodifluoroacetimidoyl iodides and 1-alkynes were converted into α-imino alkynes by using Pd(Ph₃)₂Cl₂/CuI as the catalyst under mild conditions. The reaction proceeded smoothly to give the coupling products in good to excellent yields.     

Palladium(II)-catalyzed Suzuki–Miyaura reactions of arylboronic acid with aryl halide in water in the presence of 4-(benzylthio)-N,N,N-trimethybenzenammonium chloride

This work reported that Suzuki–Miyaura coupling reactions of arylboronic acid with aryl bromide or iodides were mediated by Pd(OAc)₂ and 4-(benzylthio)-N,N,N-trimethylbenzenammonium chloride in the presence of Na₂CO₃ in water under the mild conditions. The corresponding Suzuki–Miyaura coupling products were obtained in good to excellent yields.     

Copper(I)-anilide complex [Na(phen)3][Cu(NPh2)2]: an intermediate in the copper-catalyzed N-arylation of N-phenylaniline

Complex [Na(phen)₃][Cu(NPh₂)₂] ( 2 ), containing a linear bis(N‐phenylanilide)copper(I) anion and a distorted octahedral tris(1,10‐phenanthroline)sodium counter cation, has been isolated from the catalytic C? N cross‐coupling reaction with the CuI/phen/tBuONa (phen=1,10‐phenanthroline) catalytic system. Complex 2 can react with 4‐iodotoluene to produce 4‐methyl‐N,N‐diphenylaniline ( 3 a ) with 70.6 % yield. In addition, 2 can work as an effective catalyst for C? N coupling under the same reaction conditions, thus indicating that 2 is the intermediate of the catalytic system. Both [Cu(NPh₂)₂]^? and [Cu(NPh₂)I]^? have been observed by in situ electron ionization mass spectrometry (ESI‐MS) under catalytic reaction conditions, thus confirming that they are intermediates in the reaction. A catalytic cycle has been proposed based on these observations. The molecular structure of 2 has been determined by single‐crystal X‐ray diffraction analysis.     

Oxidative addition of N-halosuccinimides to palladium(0): the discovery of neutral palladium(II) imidate complexes, which enhance Stille coupling of allylic and benzylic halides

The Stille coupling of organostannanes and organohalides, mediated by air and moisture stable palladium(II) phosphine complexes containing succinimide or phthalimide (imidate) ligands, has been investigated. An efficient synthetic route to several palladium(II) complexes containing succinimide and phthalimide ligands, has been developed. cis-Bromobis(triphenylphosphine)(N-succinimide)palladium(II) [(Ph₃P)₂Pd(N-Succ)Br] is shown to mediate the Stille coupling of allylic and benzylic halides with alkenyl, aryl and allyl stannanes. In competition experiments between 4-nitrobromobenzene and benzyl bromide with a cis-stannylvinyl ester, (Ph₃P)₂Pd(N-Succ)Br preferentially cross-couples benzyl bromide, whereas with other commonly employed precatalysts 4-nitrobromobenzene undergoes preferential cross-coupling. Furthermore, preferential reaction of deactivated benzyl bromides over activated benzyl bromides is observed for the first time. The type of halide and presence of a succinimide ligand are essential for effective Stille coupling. The type of phosphine ligand is also shown to alter the catalytic activity of palladium(II) succinimide complexes.     

Phosphineborane analogs of trimethylsilyl amides

The reaction of (CH₃)₂(BH₃)PCl with the lithium salts of acetamide, N-methyl acetamide, and N-methyl formamide produced the N(CH₃)₂(BH₃)P-monosubstituted amides. Attempts to employ the same procedure for the preparation of the bis-acetamide, the acetanilide and the N-methyl benzamide derivatives were unsuccessful. Variable temperature NMR spectroscopy revealed the presence of rotational isomers for the formamide with a population of 0.85 for the major rotamer which on the basis of the ³¹P-formyl proton coupling constants was assigned the structure where the (CH₃)₂(BH₃)P group is trans to carbonyl oxygen. The free energies of activation were determined to be 16.2 and 17.3 kcal/mol. For the other derivatives only one isomer could be detected down to—60°C. The compounds are similar to the trimethylsilyl analogs in structure and rotational populations, but the lower rotational barrier in the phosphineborane formamide derivative suggests a greater destabilization of the polar ground state amide resonance structure by the formal positive charge on phosphorus.     

Palladium catalyzed Suzuki-Miyaura coupling with aryl chlorides using a bulky phenanthryl N-heterocyclic carbene ligand

A novel bis-phenanthryl N-heterocyclic carbene (NHC) based palladium acetate catalyst was effective for the coupling of various aryl and vinyl chlorides with organoboron compounds. N,N-Bis-(2,9-dicyclohexyl-10-phenanthryl)-4,5-dihydroimidazolium chloride 8 (H₂ICP·HCl) with Pd(OAc)₂ and KF·18-c-6 in THF at room temperature gave Suzuki-Miyaura coupling of aryl and vinyl chorides, including unactivated and di-ortho substituted substrates in high yields. Hindered tri- and tetra-ortho substituted products were also efficiently produced. Benzyl chloride was also found to be a useful coupling partner and trimethylboroxine was used to give methylated products. The effect of ligand, base, temperature, solvent, and reaction time are reported along with various substrates including halides and triflates.     

Enantioselective oxidative coupling of methyl 3-hydroxy-2-naphthoate using mono-N-alkylated octahydrobinaphthyl-2,2′-diamine ligand

Mono-N-alkylated octahydrobinaphthyl-2,2′-diamine (H₈-BINAM) chiral ligands were employed in the catalytic and asymmetric oxidative coupling of methyl 3-hydroxy-2-naphthoate to the corresponding binaphthol derivative. The diamine ligand with one N-(3-pentyl) group shows highest enantioselectivity in the biaryl coupling among other BINAM derivatives, and the coupling reaction proceeds faster than the reactions using alkanediamine ligands.     

Palladium-benzimidazolium salt catalyst systems for Suzuki coupling: development of a practical and highly active palladium catalyst system for coupling of aromatic halides with arylboronic acids

Palladium-benzimidazolium salt catalyst systems have been studied for the Suzuki coupling. A different substitutent effect has been uncovered with respect to nitrogen substituents in the benzimidazolium salts from the palladium-imidazolium salt analogs. A practical and highly active palladium catalyst system, PdCl₂/N,N′-dibenzylbenzimidazolium chloride 2, has been identified for the Suzuki coupling of aromatic halides with arylboronic acids. The coupling of a wide array of aromatic halides with arylboronic acids with the PdCl₂-2 catalyst system gave good to excellent yields. The effective palladium loading could be as low as 0.0001 mol% and 0.01-0.1 mol% for iodide and bromide substrates, respectively. The coupling of unactivated aromatic chlorides with arylboronic acids also gave good results using Cs₂CO₃ as base with a 2 mol% palladium loading. The electronic factors from aromatic halides exert a significant influence on the Suzuki coupling catalyzed by the PdCl₂-2 system while the electronic effect from the arylboronic counterparts is negligible. The aromatic halides with modest steric hindrance could also couple smoothly with phenylboronic acids using the PdCl₂-2 catalyst system.     

Suzuki-Miyaura cross-coupling of alkenyl tosylates with alkenyl MIDA boronates

A practical procedure for the palladium-catalysed Suzuki-Miyaura coupling of various alkenyl tosylates with alkenyl MIDA boronates has been developed. Commercially available trans-bromo[N-succinimidyl-bis(triphenylphosphine)]palladium(II) [Pd(PPh₃)₂NBS] is an effective catalyst under the slow release conditions of MIDA boronates; with less activated alkenyl tosylates addition of the cheap, air-stable tricyclohexylphosphine tetrafluoroborate enhances reactivity.     

Stereoselective synthesis of amides possessing a vinylsilicon functionality via a ruthenium catalyzed silylative coupling reaction

An effective stereoselective synthesis of E-N-2-(silyl)vinylamides via silylative coupling of vinyl amides such as N-vinylpyrrolidinone, N-vinylphthalimide, and N-vinylformamide with vinyltrisubstituted silanes catalyzed by [RuH(Cl)(CO)(PCy₃)₂] I is described.     

Copper-catalyzed oxidative C‒H,N‒H coupling of azoles and thiophenes

C?H, N?H coupling of azole and thiophene derivatives takes place in the presence of a catalytic amount of Cu(OAc)₂ and an additive. The reaction of azoles smoothly occurs with several amines and amides catalyzed by 20 mol % of Cu(OAc)₂–2PPh₃ and 4 equiv of NaOAc under O₂ or in the presence of Ag₂CO₃ under N₂. The coupling reaction leads to a facile synthesis of a N-substituted analogue of 2,5-diarylthiazole, which shows photoluminescent properties with extended π-conjugation. Spectroscopic characteristics of the obtained thiazole derivatives are discussed by measurements of UV–vis absorption and photoluminescent spectra. Under the reaction conditions using Ag₂CO₃ as an additive and Cu(OAc)₂–2PPh₃ as a catalyst, thiophene derivatives also react with 2-pyrrolidone to undergo C?H, N?H amidation.     

Route selection in the synthesis of C-4 and C-6 substituted thienopyrimidines

Three different routes have been investigated for the preparation of 6-aryl-N-(1-arylethyl)thienopyrimidin-4-amines. First the possibilities of selective Suzuki reactions on 6-bromo-4-chlorothienopyrimidine were investigated. The preference for mono arylation at C-6 could be increased, in the case of Pd(PPh₃)₄ catalysis, by reducing the water content of the reaction, or by using less electron rich Pd-ligands. The highest selectivity was obtained with Pd(OAc)₂ or Pd₂(dba)₃, while reactions with the more electron rich Pd(PPh₃)₄ and especially XPhos gave a lower mono- to dicoupled product ratio. Secondly, two alternative strategies avoiding this selectivity issue were tested. Suzuki reaction on C-6 of 6-bromothienopyrimidin-4(3H)-one (three examples) proceeded in 70-89% yield using Pd(PPh₃)₄ in dioxane/water. Similar conditions on 4-amino-6-bromo-thienopyrimidine (eight examples) gave 67-95% yield. The reaction could be performed with boronic acids containing nonprotected phenolic groups in the ortho, meta and para positions. By prolonging the reaction time, coupling with sterically crowded arylboronic acids was also efficient. Diarylation of 6-bromo-4-chlorothienopyrimidine gave the corresponding 4,6-diarylated derivatives in 71-80% yield depending on the nature of the arylboronic acid.