Synthesis and thermochemistry of SrB2O4·4H2O and SrB2O4

Two pure strontium borates SrB₂O₄·4H₂O and SrB₂O₄ have been synthesized and characterized by means of chemical analysis and XRD, FT-IR, DTA-TG techniques. The molar enthalpies of solution of SrB₂O₄·4H₂O and SrB₂O₄ in 1 mol dm⁻³ HCl(aq) were measured to be −(9.92 ± 0.20) kJ mol⁻¹ and −(81.27 ± 0.30) kJ mol⁻¹, respectively. The molar enthalpy of solution of Sr(OH)₂·8H₂O in (HCl + H₃BO₃)(aq) were determined to be −(51.69 ± 0.15) kJ mol⁻¹. With the use of the enthalpy of solution of H₃BO₃ in 1 mol dm⁻³ HCl(aq), and the standard molar enthalpies of formation for Sr(OH)₂·8H₂O(s), H₃BO₃(s), and H₂O(l), the standard molar enthalpies of formation of −(3253.1 ± 1.7) kJ mol⁻¹ for SrB₂O₄·4H₂O, and of −(2038.4 ± 1.7) kJ mol⁻¹ for SrB₂O₄ were obtained.     

Calorimetric determination of enthalpy changes for the proton ionization of glycine, N,N-bis(2-hyroxyethyl)glycine (“bicine”) and N-tris(hydroxymethyl)methylglycine (“tricine”) in water-methanol mixtures

Enthalpies for the two proton ionizations of glycine, N,N-bis(2-hyroxyethyl)glycine (“bicine”) and N-tris(hydroxymethyl)methylglycine (“tricine”) were obtained in water-methanol mixtures with methanol mole fraction (X_m) from 0 to 0.360. With increasing methanol the ionization enthalpy for the first proton (ΔH₁) of glycine increased from 4.4 to 9.4 kJ mol⁻¹ with a minimum of 4.1 kJ mol⁻¹ at X_m = 0.059. The ionization enthalpy of the second proton (ΔH₂) for glycine decreased from 46.3 to 38.1 kJ mol⁻¹. ΔH₁ of bicine increased from 3.5 to 7.6 kJ mol⁻¹ at X_m = 0.273 before dropping to 4.1 kJ mol⁻¹ at X_m = 0.360. ΔH₂ of bicine increased from 24.9 to 29.4 kJ mol⁻¹. For tricine, ΔH₁ increased from 6.7 to 9.8 kJ mol⁻¹ at X_m = 0.194 then dropped to 7.4 kJ mol⁻¹ at X_m = 0.360. ΔH₂ for tricine first dropped from 30.8 to 28.5 kJ mol⁻¹ at X_m = 0.059 before increasing to 33.3 kJ mol⁻¹ at X_m = 0.273. The solvent composition was selected so as to include the region of maximum structure enhancement of water by methanol. The results were interpreted in terms of solvent-solvent and solvent-solute interactions.     

Synthesis, heat capacity and enthalpy of formation of [Ho2(l-Glu)2(H2O)8](ClO4)4·H2O

A complex of holmium perchlorate coordinated with l-glutamic acid, [Ho₂(l-Glu)₂(H₂O)₈](ClO₄)₄·H₂O, was prepared with a purity of 98.96%. The compound was characterized by chemical, elemental and thermal analysis. Heat capacities of the compound were determined by automated adiabatic calorimetry from 78 to 370 K. The dehydration temperature is 350 K. The dehydration enthalpy and entropy are 16.34 kJ mol⁻¹ and 16.67 J K⁻¹ mol⁻¹, respectively. The standard enthalpy of formation is −6474.6 kJ mol⁻¹ from reaction calorimetry at 298.15 K.     

Calorimetric study and thermal analysis of [Gd4/3Y2/3(Gly)6(H2O)4](ClO4)6·5H2O and [ErY(Gly)6(H2O)4](ClO4)6·5H2O (Gly: glycin)

Two solid-state coordination compounds of rare earth metals with glycin, [Gd_4/3Y_2/3(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O and [ErY(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O were synthesized. The low-temperature heat capacities of the two coordination compounds were measured with an adiabatic calorimeter over the temperature range from 78 to 376 K. [Gd_4/3Y_2/3(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O melted at 342.90 K, while [ErY(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O melted at 328.79 K. The molar enthalpy and entropy of fusion for the two coordination compounds were determined to be 18.48 kJ mol⁻¹ and 53.9 J K⁻¹ mol⁻¹ for [Gd_4/3Y_2/3(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O, 1.82 kJ mol⁻¹ and 5.5 J K⁻¹ mol⁻¹ for [ErY(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O, respectively. Thermal decompositions of the two coordination compounds were studied through the thermogravimetry (TG). Possible mechanisms of the decompositions are discussed.     

Calorimetric determination of enthalpy changes for proton ionization of N-[2-hydroxyethyl]piperazine-N′-[2-ethane sulfonic acid] (HEPES) and N-[2-hydroxyethyl]piperazine-N′-[2-hydroxypropane sulfonic acid] (HEPPSO) in water-methanol mixtures

Enthalpies for the two proton ionizations of the biochemical buffers N-[2-hydroxyethyl]piperazine-N′-[2-ethane sulfonic acid] (HEPES) and N-[2-hydroxyethyl]piperazine-N′-[2-hydroxypropane sulfonic acid] (HEPPSO) were obtained in water-methanol mixtures with methanol mole fraction (X_m) from 0 to 0.360. With increasing methanol, the ionization enthalpy for the first proton (ΔH₁) of HEPES increased steadily from 8.4 to 15.3 kJ mol⁻¹ whereas that for HEPPSO rose to a maximum of 21.0 kJ mol⁻¹ at X_m = 0.123 before dropping to 18.4 kJ mol⁻¹ at X_m = 0.360. The ionization enthalpy for the second proton (ΔH₂) of HEPES varied from 20.8 kJ mol⁻¹ in water to 13.6 kJ mol⁻¹ at X_m = 0.360 with a maximum of 24.8 kJ mol⁻¹ at X_m = 0.194. For HEPPSO, ΔH₂ increased steadily from 23.4 to 29.2 kJ mol⁻¹. The solvent composition was selected so as to include the region of maximum structure enhancement of water by methanol. The results were interpreted in terms of solvent-solvent and solvent-solute interactions.     

Thermodynamic properties of the gaseous barium silicates BaSiO2 and BaSiO3

In the present study, the stability of gaseous barium silicates was confirmed by the high temperature mass spectrometry. On the basis of equilibrium constants measured for gas-phase reactions, the standard formation enthalpies were determined for gaseous barium silicates as (−510 ± 15) kJ · mol⁻¹ and (−884 ± 18) kJ · mol⁻¹ at 298 K; standard atomization enthalpies as (1637 ± 17) kJ · mol⁻¹ and (2318 ± 20) kJ · mol⁻¹ at 298 K for BaSiO₂ and BaSiO₃, respectively. Based on the results obtained the critical analysis of the literature data was carried out.     

Vaporization of DyI3(s) and thermochemistry of the homocomplexes (DyI3)2(g) and (DyI3)3(g)

The vaporization of DyI₃(s) was investigated in the temperature range between 833 and 1053 K by the use of Knudsen effusion mass spectrometry. The ions DyI₂⁺, DyI₃⁺, Dy₂I₄⁺, Dy₂I₅⁺, Dy₃I₇⁺, and Dy₃I₈⁺ were detected in the mass spectrum of the equilibrium vapor. The gaseous species DyI₃, (DyI₃)₂, and (DyI₃)₃ were identified and their partial pressures determined. Enthalpies and entropies of sublimation resulted according to the second- and third-law methods. The following sublimation enthalpies at 298 K were determined for the gaseous species given in brackets: 274.8±8.2 kJ mol⁻¹ [DyI₃], 356.0±11.3 kJ mol⁻¹ [(DyI₃)₂], and 436.6±14.6 kJ mol⁻¹ [(DyI₃)₃]. The enthalpy changes of the dissociation reactions (DyI₃)₂=2 DyI₃ and (DyI₃)₃=3 DyI₃ were obtained as Δ_dH°(298)=193.3±5.6 and 390.3±13.0 kJ mol⁻¹, respectively.     

Energetics of cobalt phosphate frameworks: α, β, and red NaCoPO4

Thermal behavior, relative stability, and enthalpy of formation of α (pink phase), β (blue phase), and red NaCoPO₄ are studied by differential scanning calorimetry, X-ray diffraction, and high-temperature oxide melt drop solution calorimetry. Red NaCoPO₄ with cobalt in trigonal bipyramidal coordination is metastable, irreversibly changing to α NaCoPO₄ at 827 K with an enthalpy of phase transition of −17.4±6.9 kJ mol⁻¹. α NaCoPO₄ with cobalt in octahedral coordination is the most stable phase at room temperature. It undergoes a reversible phase transition to the β phase (cobalt in tetrahedra) at 1006 K with an enthalpy of phase transition of 17.6±1.3 kJ mol⁻¹. Enthalpy of formation from oxides of α, β, and red NaCoPO₄ are −349.7±2.3, −332.1±2.5, and −332.3±7.2 kJ mol⁻¹; standard enthalpy of formation of α, β, and red NaCoPO₄ are −1547.5±2.7, −1529.9±2.8, and −1530.0±7.3 kJ mol⁻¹, respectively. The more exothermic enthalpy of formation from oxides of β NaCoPO₄ compared to a structurally related aluminosilicate, NaAlSiO₄ nepheline, results from the stronger acid-base interaction of oxides in β NaCoPO₄ (Na₂O, CoO, P₂O₅) than in NaAlSiO₄ nepheline (Na₂O, Al₂O₃, SiO₂).     

On AgRhO2, and the new quaternary delafossites AgLi1/3M2/3O2, syntheses and analyses of real structures

Two new quaternary delafossite type oxides with the general formula Ag(Li_1/3M_2/3)O₂, M=Rh, Ir, have been synthesized, and their structures characterized. Based on X-ray and electron diffraction analyses the structural similarity with AgRhO₂ delafossite, has been evidenced. The real structures of the quaternary delafossites have been revealed, which has allowed to fully explain the diffuse scattering as observed in X-ray powder diffraction. AgRhO₂ is thermally stable up to 1173 K, the behavior of the two quaternary compounds AgLi_1/3Rh_2/3O₂ and AgLi_1/3Ir_2/3O₂ is comparable, and they decompose above 950 and 800 K, respectively. AgRhO₂ shows temperature independent paramagnetism, while for the other two an effective magnetic moment of 1.77μ_B for Ir, and 1.70μ_B for Rh were determined, applying the Curie-Weiss law. All compounds are semiconducting with activation energies of 4.97 kJ mol⁻¹ (AgLi_1/3Rh_2/3O₂), 11.42 kJ mol⁻¹ (AgLi_1/3Ir_2/3O₂) and 17.58 kJ mol⁻¹ (AgRhO₂).     

Isothermal and polythermal kinetics of depolymerization of C60 polymers

Isothermal depolymerization of the two polymers of C₆₀, i.e. of 1D orthorhombic phase (O) and of “dimer state” (DS) have been studied by means of Infra-red spectroscopy in the temperature ranges 383-423 and 453-503 K, respectively. Differential Scanning Calorimetry (DSC) has been used to obtained depolymerization polytherms for O-phase and DS. Standard set of reaction models have been applied to describe depolymerization behavior of O-phase and DS. The choice of the reaction models was based primarily on the isotherms. Several models however demonstrated almost equal goodness of fit and were statistically indistinguishable. In this case we looked for simpler/more realistic mechanistic model of the reaction. For DS the first-order expression (Mampel equation) with the activation energy E_a = 134 ± 7 kJ mol⁻¹ and preexponential factor ln(A/s⁻¹) = 30.6 ± 2.1, fitted the isothermal data. This activation energy was nearly the same as the activation energy of the solid-state reaction of dimerization of C₆₀ reported in the literature. This made the enthalpy of depolymerization close to zero in accord with the DSC data on depolymerization of DS. Mampel equation gave the best fit to the polythermal data with E_a = 153 kJ mol⁻¹ and preexponential factor ln(A/s⁻¹) = 35.8. For O-phase two reasonable reaction models, i.e. Mampel equation and “contracting spheres” model equally fitted to the isothermal data with E_a = 196 ± 2 and 194 ± 8 kJ mol⁻¹, respectively and ln(A/s⁻¹) = 39.1 ± 0.5 and 37.4 ± 0.2, respectively and to polythermal data with E_a = 163 and 170 kJ mol⁻¹, respectively and ln(A/s⁻¹) = 32.5 and 29.5, respectively.     

Adsorption of arsenic(III) into modified lamellar Na-magadiite in aqueous medium—Thermodynamic of adsorption process

Synthetic Na-magadiite sample was used for organofunctionalization process with N-propyldiethylenetrimethoxysilane and bis[3-(triethoxysilyl)propyl]tetrasulfide, after expanding the interlayer distance with polar organic solvents such as dimethylsulfoxide (DMSO). The resulted materials were submitted to process of adsorption with arsenic solution at pH 2.0 and 298±1 K. The adsorption isotherms were adjusted using a modified Langmuir equation with regression nonlinear; the net thermal effects obtained from calorimetric titration measurements were adjusted to a modified Langmuir equation. The adsorption process was exothermic (Δ_intH=−4.15-5.98 kJ mol⁻¹) accompanied by increase in entropy (Δ_intS=41.32-62.20 J k⁻¹ mol⁻¹) and Gibbs energy (Δ_intG=−22.44−24.56 kJ mol⁻¹). The favorable values corroborate with the arsenic (III)/basic reactive centers interaction at the solid-liquid interface in the spontaneous process.     

Ethylene addition to OsO3(CH2) - A theoretical study

Quantum chemical calculations at the B3LYP/TZVP level of theory have been carried out for the initial steps of the addition reaction of ethylene to OsO₃(CH₂). The calculations predict that there are two reaction channels with low activation barriers. The kinetically and thermodynamically most favored reaction is the [3+2]_O, C addition which has a barrier of only 2.3 kcal mol⁻¹. The [3+2]_O, O addition has a slightly higher barrier of 6.5 kcal mol⁻¹. Four other reactions of OsO₃(CH₂) with C₂H₄ have significantly larger activation barriers. The addition of ethylene to one oxo group with concomitant migration of one hydrogen atom from ethylene to the methylene ligand yields thermodynamically stable products but the activation energies for the reactions are 16.7 and 20.9 kcal mol⁻¹. Even higher barriers are calculated for the [2+2] addition to the OsO bond (32.6 kcal mol⁻¹) and for the addition to the oxygen atom yielding an oxiran complex (41.2 kcal mol⁻¹). The activation barriers for the rearrangement to the bisoxoosmaoxirane isomer (36.3 kcal mol⁻¹) and for the addition reactions of the latter with C₂H₄ are also quite high. The most favorable reactions of the cyclic isomer are the slightly exothermic [2+2] addition across the OsO bond which has an activation barrier of 46.6 kcal mol⁻¹ and the [3+2]_O, O addition which is an endothermic process with an activation barrier of 44.3 kcal mol⁻¹.     

Synthesis, characterization and standard molar enthalpy of formation of La(C7H5O3)2·(C9H6NO)

The product from reaction of lanthanum chloride seven-hydrate with salicylic acid and 8-hydroxyquinoline, La(C₇H₅O₃)₂·(C₉H₆NO), was characterized by IR, elemental analysis, molar conductance, and thermogravimetric analysis. The standard molar enthalpies of solution of [LaCl₃·7H₂O (s)], [2C₇H₆O₃ (s)], [C₉H₇NO (s)] and [La(C₇H₅O₃)₂·(C₉H₆NO) (s)] in a mixed solvent of absolute ethyl alcohol, dimethyl formamide (DMF) and perchloric acid were determined by calorimetry to be [LaCl₃·7H₂O (s), 298.15 K] = −96.45 ± 0.18 kJ mol⁻¹, [2C₇H₆O₃ (s), 298.15 K] = 14.99 ± 0.17 kJ mol⁻¹, [C₉H₇NO (s), 298.15 K] = −3.86 ± 0.06 kJ mol⁻¹ and [La(C₇H₅O₃)₂·(C₉H₆NO) (s), 298.15 K] = −117.78 ± 0.11 kJ mol⁻¹. The enthalpy change of the reaction

(1)     

Study of the in vitro degradation of poly(ethyl glyoxylate)

In vitro degradation of poly(ethyl glyoxylate) (PEtG), a functionalised polyacetal, was investigated. First, the thermodynamic polymerization parameters and the ceiling temperature (T_c) were determined (ΔH_p = 28 ± 3 kJ mol⁻¹, ΔS_p = 98 ± 7 J mol⁻¹ K⁻¹, T_c = 310 ± 4 K). Secondly, PEtG hydrolysis was investigated using potentiometry, weight loss measurements, SEC and ¹H NMR. The results show that PEtG is stable for at least 7 days in aqueous media. Then degradation occurs and releases ethanol and glyoxylic acid hydrate as final products. A scheme for the degradation mechanism involving chain scission and ester hydrolysis is proposed.     

Kinetics and mechanism of hydroboration reactions of HBBr2 · SMe2 and HBCl2 · SMe2 - Application of B NMR spectroscopy

The kinetics and mechanism of the hydroboration reactions of 1-octene with HBBr₂ · SMe₂ and HBCl₂ · SMe₂, in CH₂Cl₂ as a solvent, were studied. Rates of hydroboration were monitored using ¹¹B NMR spectroscopy. The reactions exhibited simple second-order kinetics of the form . The HBCl₂ · SMe₂ was found to be 20 times more reactive than the HBBr₂ · SMe₂. The overall activation parameters (ΔH^≠, ΔS^≠) for the reaction of HBBr₂ · SMe₂ with 1-octene were found to be 82 ± 1 kJ mol⁻¹, −18 ± 4 J K⁻¹ mol⁻¹ and with 1-hexyne were 78 ± 4 kJ mol⁻¹ −34 ± 12 J K⁻¹ mol⁻¹. For the reaction of HBCl₂ · SMe₂ with 1-octene, ΔH^≠ and ΔS^≠ were 104 ± 5 kJ mol⁻¹ and 43 ± 16 J K⁻¹ mol⁻¹, respectively. The activation parameters (ΔH^≠, ΔS^≠) for the dissociation of Me₂S from HBBr₂ · SMe₂ were found to be 104 ± 2 kJ mol⁻¹, +33 ± 8 J K⁻¹ mol⁻¹, respectively. Based on the activation parameters, it was concluded that the detaching of Me₂S from the boron centre follows a dissociative mechanism, while the hydroboration process follows an associative pathway. It was also concluded that the dissociation of Me₂S from the boron centre is the rate determining step.     

Kinetics of the CH3 + HCl/DCl → CH4/CH3D + Cl and CD3 + HCl/DCl → CD3H/CD4 + Cl reactions: An experimental H atom tunneling investigation

The kinetics of the radical reactions of CH₃ with HCl or DCl and CD₃ with HCl or DCl have been investigated in a temperature controlled tubular reactor coupled to a photoionization mass spectrometer. The CH₃ (or CD₃) radical, R, was produced homogeneously in the reactor by a pulsed 193 nm exciplex laser photolysis of CH₃COCH₃ (or CD₃COCD₃). The decay of CH₃/CD₃ was monitored as a function of HCl/DCl concentration under pseudo-first-order conditions to determine the rate constants as a function of temperature, typically from 188 to 500 K. The rate constants of the CH₃ and CD₃ reactions with HCl had strong non-Arrhenius behavior at low temperatures. The rate constants were fitted to a modified Arrhenius expression k = QA exp (−E_a/RT) (error limits stated are 1σ + Students t values, units in cm³ molecule⁻¹ s⁻¹): k(CH₃ + HCl) = [1.004 + 85.64 exp (−0.02438 × T/K)] × (3.3 ± 1.3) × 10⁻¹³ exp [−(4.8 ± 0.6) kJ mol⁻¹/RT] and k(CD₃ + HCl) = [1.002 + 73.31 exp (−0.02505 × T/K)] × (2.7 ± 1.2) × 10⁻¹³ exp [−(3.5 ± 0.5) kJ mol⁻¹/RT]. The radical reactions with DCl were studied separately over a wide ranges of temperatures and in these temperature ranges the rate constants determined were fitted to a conventional Arrhenius expression k = A exp (−E_a/RT) (error limits stated are 1σ + Students t values, units in cm³ molecule⁻¹ s⁻¹): k(CH₃ + DCl) = (2.4 ± 1.6) × 10⁻¹³ exp [−(7.8 ± 1.4) kJ mol⁻¹/RT] and k(CD₃ + DCl) = (1.2 ± 0.4) × 10⁻¹³ exp [−(5.2 ± 0.2) kJ mol⁻¹/RT] cm³ molecule⁻¹ s⁻¹.     

New C2-symmetric 2,2′-bipyridine crown macrocycles for enantioselective recognition of amino acid derivatives

A series of new C₂-symmetric 2,2′-bipyridine-contaning crown macrocycles 1-4 has been developed for enantiomeric recognition of amino acid derivatives. These new macrocycles have been showed to be strong complexing agents for primary organic ammonium salts (with K up to 4.83×10⁵ M⁻¹ and −ΔG₀ up to 32.4 kJ mol⁻¹) and also useful chromophores for UV-vis titration studies. These macrocyclic hosts exhibited enantioselective binding towards the (S)-enantiomer of phenylglycine methyl ester hydrochloride (Am1) with K_(S)/K_(R) up to 2.10 (ΔΔG₀=−1.84 kJ mol⁻¹) in CH₂Cl₂ with 0.25% CH₃OH. The structure-binding relationship studies showed that the aromatic subunit and the ester group of the ammonium guests are both important for good enantioselectivity. In addition, the host-guest complexes have been studied using various NMR experiments.     

Peroxide-related chemiluminescence of cellulose and its self-absorption

In chemiluminometry, we measure the very faint light as a consequence of chemical reactions. During oxidation of cellulose, several reaction pathways lead to light production and in the present work we investigated chemiluminescence as a consequence of peroxide formation.With ¹³C-1 labelled glucose we studied oxidation of the end groups by following the emission of ¹³CO₂ using gas chromatography-mass spectrometry. A mechanism of peroxyacyl radical formation is suggested. Its proposed decomposition is a first-order reaction, which is reflected in chemiluminometric experiments. From these, we calculated the activation energy of the process, which depends on the temperature and is approximately 75 kJ mol⁻¹ at T > 100 °C and ∼55 kJ mol⁻¹ at T < 100 °C.Evidence is also presented on self-absorption of chemiluminescence in cellulose, suggesting that the phenomenon may account for up to 50% intensity loss.     

A computational study of SbnF5n (n = 1-4): Implications for the fluoride ion affinity of nSbF5

This contributions shows with a series of ab initio MP2 and DFT (BP86 and B3-LYP) computations with large basis sets up to cc-pVQZ quality that the literature value of the standard enthalpy of depolymerization of Sb₄F_20(g) to give SbF_5(g) (+18.5 kJ mol⁻¹) [J. Fawcett, J.H. Holloway, R.D. Peacock, D.R. Russell, J. Fluorine Chem. 20 (1982) 9] is by about 50 kJ mol⁻¹ in error and that the correct value of (Sb₄F_20(g)) is +68 ± 10 kJ mol⁻¹. We assign , , and values for Sb_nF_5n with n = 2-4 and compare the results to available experimental gas phase data. Especially the MP2/TZVPP values obtained in an indirect procedure that rely on isodesmic reactions or the highly accurate compound methods G2 and CBS-Q are in excellent agreement with the experimental data, and reproduce also the fine experimental details at temperatures of 423 and 498 K. With these data and the additional calculation of [Sb_nF_5n+1]⁻ (n = 1-4), we then assessed the fluoride ion affinities (FIAs) of Sb_nF_5n(g), nSbF_5(g), nSbF_5(l) and the standard enthalpies of formation of Sb_nF_5n(g) and [Sb_nF_5n+1]⁻_(g): FIA(Sb_nF_5n(g)) = 514 (n = 1), 559 (n = 2), 572 (n = 3) and 580 (n = 4) kJ mol⁻¹; FIA(nSbF_5(g)) = 667 (n = 2), 767 (n = 3) and 855 (n = 4) kJ mol⁻¹; FIA(nSbF_5(l)) = 434 (n = 1), 506 (n = 2), 528 (n = 3) and 534 (n = 4) kJ mol⁻¹. Error bars are approximately ±10 kJ mol⁻¹. Also the related Gibbs energies were derived. Δ_fH°([Sb_nF_5n+1]⁻_(g)) = −2064 ± 18 (n = 1), −3516 ± 25 (n = 2), −4919 ± 31 (n = 3) and −6305 ± 36 (n = 4) kJ mol⁻¹.