Electroanalytical characteristics of antipsychotic drug ziprasidone and its determination in pharmaceuticals and serum samples on solid electrodes

Ziprasidone is a psychotropic agent used for the treatment of schizophrenia. Its oxidation was investigated electrochemically at boron-doped diamond and glassy carbon electrodes using cyclic, differential pulse, and square wave voltammetry. The dependence of the peak current and peak potentials on pH, concentration, nature of the buffer, and scan rate were examined. The process was diffusion and adsorption controlled for boron-doped diamond and glassy carbon electrodes, respectively. The possible mechanism of oxidation was discussed with some model compounds that have indole and piperazine oxidations. A linear response was obtained between 8 × 10⁻⁷ and 8 × 10⁻⁵ M for the first peak in acetate buffer (pH 5.5) and between 2 × 10⁻⁶ and 2 × 10⁻⁴ M for the second peak in 0.1 M H₂SO₄ with boron-doped diamond electrode for differential pulse and square wave voltammetric techniques. The reproducibility and accuracy of the proposed methods were found between 0.31 and 1.20, 99.27 and 100.22, respectively. The recovery studies were also achieved to check selectivity and accuracy of the methods. The proposed methods were applied for the determination of ziprasidone from pharmaceutical dosage forms and human serum samples without any time-consuming extraction, separation, evaporation or adsorption steps prior to drug assay except precipitation of the proteins using acetonitrile. The results were statistically compared with those obtained through an established LC-UV technique, no significant differences were been found between the voltammetric and LC methods.     

Anodic voltammetric behavior of resveratrol and its electroanalytical determination in pharmaceutical dosage form and urine

The anodic voltammetric behavior of resveratrol was studied using cyclic and square wave voltammetric techniques. The oxidation of resveratrol is irreversible and exhibits an adsorption controlled process which is of pH dependence. The oxidation mechanism was proposed in this work. The dependence of the current on pH, the concentration and nature of buffer, and scan rate was investigated to optimize the experimental conditions for the determination of resveratrol. It was found that the optimum buffer for the determination of resveratrol is 1.0 × 10⁻³ M KCl + 0.1 M HNO₃ solution with the pH of 1.0. In the range of 5.00 × 10⁻⁹ to 1.65 × 10⁻⁷ M, the current measured by square wave voltammetry presents a good linear property as a function of the concentration of resveratrol. In addition, the reproducibility, precision and accuracy of the method were checked as well. The method was applied for the determination of resveratrol in Chinese patent medicine and diluted urine.     

Electrochemical study and flow injection analysis of paracetamol in pharmaceutical formulations based on screen-printed electrodes and carbon nanotubes

Acetaminophenol or paracetamol is one of the most commonly used analgesics in pharmaceutical formulations. Acetaminophen is electroactive and voltammetric mechanistic studies for the electrode processes of the acetaminophenol/N-acetyl-p-quinoneimine redox system are presented. Carbon nanotubes modified screen-printed electrodes with enhanced electron transfer properties are used for the study of the electrochemical-chemical oxidation mechanism of paracetamol at pH 2.0.Quantitative analysis of paracetamol by using its oxidation process (in a Britton-Robinson buffer solution pH 10.0) at +0.20 V (vs. an Ag pseudoreference electrode) on an untreated screen-printed carbon electrode (SPCE) was carried out. Thus, a cyclic voltammetric based reproducible determination of acetaminophen (R.S.D., 2.2%) in the range 2.5 × 10⁻⁶ M to 1 × 10⁻³ M, was obtained. However, when SPCEs are used as amperometric detectors coupled to a flow injection analysis (FIA) system, the detection limit achieved for paracetamol was 1 × 10⁻⁷ M, one order of magnitude lower than that obtained by voltammetric analysis. The repeatability of the amperometric detection with the same SPCE is 2% for 15 successive injections of 10⁻⁵ M acetaminophen and do not present any memory effect.Finally, the applicability of using screen-printed carbon electrodes for the electrochemical detection of paracetamol (i.e. for quality control analysis) was demonstrated by using two commercial pharmaceutical products.     

A novel method for determination of magnesium in urine and water samples with mercury film-plated carbon paste electrode

A square wave adsorptive stripping voltammetric (SWAdSV) method for the indirect determination of trace amounts of magnesium with thiopentone sodium (TPS) as an electroactive ligand, at carbon paste mercury film electrode (CP-MFE) is proposed. It is observed that the increase of the square wave voltammetric cathodic peak current of TPS, under alkaline conditions, is linear with the increase of Mg concentration. Under optimum experimental conditions viz.; pH 10.75, 3×10⁻⁵ M TPS and 0.05 M phosphate buffer (Na₂HPO₄-NaH₂PO₄), a linear relation in the range 6×10⁻⁹ to 9×10⁻⁸ M Mg²⁺ (0.14-2.16 ppb), at 60 s deposition time, is obtained. The detection limit of Mg²⁺ is 0.14 ppb for 60 s deposition time with the relative standard deviation is 0.5% (n=5). The proposed method was successfully applied to the determination of magnesium in urine and tap water samples with satisfactory results. The data obtained are compared with the standard flame atomic absorption spectrophotometric method (FAAS).     

Electrochemical characterisation of nefazodone hydrochloride and voltammetric determination of the drug in pharmaceuticals and human serum

Nefazodone, an antidepressant was electrochemically studied in various buffer systems and at different pH using glassy carbon electrode. Nefazodone was electrochemically oxidized at all pH values. According to the linear relation between the peak current and the nefazodone concentration differential pulse (DPV) and square wave (SWV) voltammetric methods for its quantitative determination in pharmaceuticals and human serum were developed. For analytical purposes, a very well resolved diffusion controlled voltammetric peak was obtained in 0.1 M H₂SO₄ at 0.99 and 1.03 V for DPV and SWV techniques, respectively. The linear response was obtained in the ranges of 8×10⁻⁷ to 6×10⁻⁴ M with a detection limit of 2.1×10⁻⁷ M for DPV and 1.17×10⁻⁷ M for SWV techniques. The repeatability and reproducibility of the methods were within 1.03, 0.81% relative standard deviations (R.S.D.) for peak currents and 0.40, 0.20% R.S.D. for peak potentials, for DPV and SWV, respectively. Precision and accuracy of the developed method was checked by recovery studies. The proposed methods were successfully applied to the individual tablet dosage form and human serum.     

Determination of antihelminthic drug pyrantel pamoate in bulk and pharmaceutical formulations using electro-analytical methods

Electrochemical behaviour of pyrantel pamoate has been studied by using different voltammetric and polarographic techniques in Britton Robinson buffer system. Differential pulse polarographic and cyclic voltammetric methods have been developed for the determination of drug in pharmaceutical formulation. A well-defined cathodic wave and one anodic peak were observed for the pyrantel pamoate in the entire pH range. Number of electrons transferred in the reduction process was calculated and the reduction mechanism postulated. The results indicate that the electrode process is reversible and diffusion controlled. The proposed method has been validated. The peak current is found to be linear over the concentration range 4 × 10⁻⁴ to 2 × 10⁻² mol L⁻¹. The lower detection limit (LOD) and lower limit of quantitation (LOQ) is found to be 2.45 × 10⁻⁵ and 8 × 10⁻⁵ mol L⁻¹.     

Study of the electrochemical behavior of isorhamnetin on a glassy carbon electrode and its application

The electrochemical behavior of isorhamnetin (ISO) at a glassy carbon electrode was studied in a phosphate buffer solution (PBS) of pH 4.0 by cyclic voltammetry (CV) and differential pulse voltammetric method (DPV). A well-defined redox wave of ISO involving one electrons and one proton appeared. The electrode reaction is a reactant weak adsorption-controlled process with a charge transfer coefficient (α) of 0.586. Based on the understanding of the electrochemical process of ISO at the glassy carbon electrode, analysis of ISO can be realized. Under optimal conditions, the oxidation peak current showed linear dependence on the concentration of ISO in the range of 1.0 × 10⁻⁸ to 4.0 × 10⁻⁷ M and 1.0 × 10⁻⁶ to 1.0 × 10⁻⁵ M. The detection limit is 5.0 × 10⁻⁹ M. This method has been successfully applied to the detection of ISO in tablets.     

Urea as new stabilizing agent for imipenem determination: electrochemical study and determination of imipenem and its primary metabolite in human urine

Imipenem shows a fast chemical conversion to a more stable imin form (identical to that of biochemical dehydropeptidase degradation) in aqueous solutions and stabilizing agents used avoid its electrochemical study and determination.The aim of this work is the proposal of urea as stabilizing agent which allows the electrochemical study of imipenem and the proposal of electrochemical methods for the determination of imipenem and its primary metabolite (M1) in human urine samples. Electrochemical studies were realized in phosphate buffer solutions over pH range 1.5-8.0 using differential-pulse polarography, DC-tast polarography, cyclic voltammetry and adsorptive stripping voltammetry. In acidic media, a non-reversible diffusion-controlled reduction involving a two steps mechanism which involves one electron and one proton in the first step and two electrons and two protons in the second step occurs and the mechanism for the reduction was suggested.A differential-pulse polarographic method for the determination of imipenem in the concentration range 3.2 × 10⁻⁶ to 2 × 10⁻⁵ M (0.95-3.4 mg/L) and its primary metabolite in the concentration range 1.4 × 10⁻⁶ to 10⁻⁴ M (0.43-26.1 mg/L) with detection limits of 9.6 × 10⁻⁷ M (0.28 μg/L imipenem) and 4.3 × 10⁻⁷ M (0.14 μg/L M1) was proposed. Also, a method based on controlled adsorptive pre-concentration of imipenem on the hanging mercury drop electrode followed by voltammetric measure, allows imipenem determination in the concentration range 1.8 × 10⁻⁸ to 1.2 × 10⁻⁶ M (5.42-347 μg/L) with a detection limit of 5.4 × 10⁻⁹ M (1.63 μg/L). The proposed methods have been used for the direct determination of the analytes in a pharmaceutical formulation and human urine.     

Sensitive voltammetric determination of baicalein at DNA Langmuir-Blodgett film modified glassy carbon electrode

The present paper describes to modify a double stranded DNA-octadecylamine (ODA) Langmuir-Blodgett film on a glassy carbon electrode (GCE) surface to develop a voltammetric sensor for the detection of trace amounts of baicalein. The electrode was characterized by atomic force microscopy (AFM) and cyclic voltammetry (CV). Electrochemical behaviour of baicalein at the modified electrode had been investigated in pH 2.87 Britton-Robinson buffer solutions by CV and square wave voltammetry (SWV). Compared with bare GCE, the electrode presented an electrocatalytic redox for baicalein. Under the optimum conditions, the modified electrode showed a linear voltammetric response for the baicalein within a concentration range of 1.0 × 10⁻⁸-2.0 × 10⁻⁶ mol L⁻¹, and a value of 6.0 × 10⁻⁹ mol L⁻¹ was calculated for the detection limit. And the modified electrode exhibited an excellent immunity from epinephrine, dopamine, glucose and ascorbic acid interference. The method was also applied successfully to detect baicalein in the medicinal tablets and spiked human blood serum samples with satisfactory results.     

Electrooxidation of the antiviral drug valacyclovir and its square-wave and differential pulse voltammetric determination in pharmaceuticals and human biological fluids

The electrochemical properties of valacyclovir, an antiviral drug, were investigated in pH range 1.8-12.0 by cyclic, differential pulse and square-wave voltammetry. The drug was irreversibly oxidized at a glassy carbon electrode in one or two oxidation steps, which are pH-dependent. For analytical purposes, a very resolved diffusion controlled voltammetric peak was obtained in Britton-Robinson buffer at pH 10.0 using differential pulse and square-wave modes. Limits of detection were 1.04 × 10⁻⁷ and 4.60 × 10⁻⁸ M for differential pulse and square-wave voltammetry, respectively. The applicability to direct assays of tablets, spiked human serum and simulated gastric fluid, was described.     

Electrooxidation of pimozide and its differential pulse voltammetric and HPLC-EC determination

The oxidative behaviour of pimozide was studied in hydroalcoholic media (10+90 methanol-H₂O, pH range 2-7.5) at carbon based electrodes. Pimozide was irreversibly oxidized at high positive potentials, resulting in the formation of a couple with a reduction and re-oxidation peak at much lower potentials. The response was evaluated with respect to pH, scan rate, addition of surfactant and other variables. Using differential pulse voltammetry (DPV), the drug yielded a well-defined voltammetric response in Britton-Robinson buffer, pH 2.1 at +1.1 V (versus Ag/AgCl) on glassy carbon electrode. The process could be used to determine pimozide concentrations in the range 8×10⁻⁷-1×10⁻⁴ M. Applicability to tablets and human serum analysis was illustrated. Furthermore, a high-performance liquid chromatographic method with electrochemical detection (HPLC-EC) was developed, which allowed pimozide to be detected down to a level of 2.7×10⁻¹⁰ M (0.25 ppb).     

Accumulation and trace measurement of chloroquine drug at DNA-modified carbon paste electrode

The voltammetric behaviour of chloroquine was investigated at carbon paste and dsDNA-modified carbon paste electrodes in different buffer systems over a wide pH range using cyclic and differential pulse voltammetry. Chloroquine was oxidized in the pH range 2.0-11.0 yielding one irreversible main oxidation peak. A second peak was also observed only in the pH range 5.0-7.0. The modification of the carbon paste surface with dsDNA allowed a preconcentration process to take place for chloroquine such that higher sensitivity was achieved as compared with the bare surface. The response was characterized with respect to solution pH, ionic strength, accumulation time and potential, chloroquine concentration, and other variables. Stripping voltammetric response showed a linear calibration curve in the range 1.0 × 10⁻⁷ to 1.0 × 10⁻⁵ mol l⁻¹ with a detection limit of 3.0 × 10⁻⁸ mol l⁻¹ at the dsDNA-modified electrode. Application of the modified electrode to serum, without sample pretreatment, resulted in good recovery higher than 95% and the higher standard deviation was 3.0%.     

Simultaneous voltammetric determination of prednisone and prednisolone in human body fluids

A sensitive, rapid and reliable electrochemical method based on voltammetry at single wall carbon nanotube (SWNT) modified edge plane pyrolytic graphite electrode (EPPGE) is proposed for the simultaneous determination of prednisolone and prednisone in human body fluids and pharmaceutical preparations. The electrochemical response of both the drugs was evaluated by osteryoung square wave voltammetry (OSWV) in phosphate buffer medium of pH 7.2. The modified electrode exhibited good electrocatalytic properties towards prednisone and prednisolone reduction with a peak potential of ∼−1230 and ∼−1332 mV respectively. The concentration versus peak current plots were linear for both the analytes in the range 0.01-100 μM and the detection limit (3σ/slope) observed for prednisone and prednisolone were 0.45 × 10⁻⁸, 0.90 × 10⁻⁸ M, respectively. The results of the quantitative estimation of prednisone and prednisolone in biological fluids were also compared with HPLC and the results were in good agreement.     

Fabrication of a covalently attached multilayer film electrode containing cobalt phthalocyanine and its application as a potentiometric sensor of iodide ion

Construction of a highly stable covalently attached multilayer film electrode containing cobalt phthalocyanine was achieved by UV irradiation of ionic self-assembled multilayer films of diazo-resins (DAR) and cobalt phthalocyanine tetrasulfonic acid (CoTsPc) tetrasodium salt. The modified electrode had good potentiometric response to iodide ion. The potentiometric response was independent of the pH of the solution between pH 2.5 and 6.0, while it was dependent on the nature of the buffer media. The modified electrode had a linear dynamic range between 4.7×10⁻⁶ M and 0.1 M with a Nernstian slope of 58.8 mV per decade and a detection limit of 3.5×10⁻⁶ M in acetate buffer (0.1 M, pH 4.6). The modified electrode also exhibited a fast response, good stability and repeatability.     

Voltammetric determination of Imatinib (Gleevec) and its main metabolite using square-wave and adsorptive stripping square-wave techniques in urine samples

The voltammetric behaviour of Imatinib (STI 571) and its main metabolite (N-demethylated piperazine derivative) were studied by square-wave techniques, resulting in to two methods for their determination in aqueous and urine samples at pH 2. The application of the square-wave (SW) without the adsorptive accumulation and voltammetric stripping (AdSV) exhibit a peak at a reduction potential of −0.70 V for an accumulation potential of −0.45 V. The sensitivity was higher for the stripping technique because a signal four times higher than that provided by the square-wave method without the previous accumulation was obtained. Due to the fact that Imatinib and its metabolite show the same voltammetric reduction process, some experiments were performed in order to compare the voltammetric response of Imatinib and its main metabolite in a similar ratio than that of the therapeutic concentration. The calibration curve for Imatinib in urine was linear in the range from 1.9 × 10⁻⁸ to 1.9 × 10⁻⁶ M in stripping mode with an accumulation time (t_acc) of 10 s. The relative standard deviations obtained for concentration levels of Imatinib as low as 2.0 × 10⁻⁷ M for square-wave was 2.17% (n = 9) and for stripping square-wave was 2.65% (n = 9) in the same day. The limits of detection for square-wave and stripping square-wave were 5.55 × 10⁻⁹ and 5.19 × 10⁻⁹ M, respectively. Thus, the presented method are straightforward, rapid and sensitive and has been applied to the determination of Imatinib and its main metabolite altogether in urine samples from real patients.     

Anodic stripping voltammetry at in situ bismuth-plated carbon and gold microdisc electrodes in variable electrolyte content unstirred solutions

Carbon and gold microdisc electrodes (30 and 10 μm, respectively) have been tested as substrates for in situ bismuth film plating from unstirred solutions of variable acetate buffer content and were subsequently used in the anodic stripping voltammetry determination of Pb(II) and Cd(II) ions. The effects of Bi(III) concentration, analyte accumulation time, stirring as well as supporting electrolyte content have been studied. Under optimal conditions good voltammetric responses were obtained by means of square wave anodic stripping voltammetry in unstirred analyte solutions of 5 × 10⁻⁸ to 10⁻⁶ M, even in the absence of added buffer. In an indicative application, Pb(II) ion levels were determined in tap water using bismuth-plated carbon microdisc electrodes.     

Indirect determination of cyanide ion and hydrogen cyanide by adsorptive stripping voltammetry at a mercury electrode

An indirect voltammetric method is described for determination of cyanide ions and hydrogen cyanide, using the effect of cyanide on cathodic adsorptive stripping peak height of Cu-adenine. The method is based on competitive Cu complex formation reaction between adenine at the electrode surface and CN⁻ ions in solution. Under the optimum experimental conditions (pH=6.42 Britton-Robinson buffer, 1×10⁻⁴ M copper and 8×10⁻⁷ M adenine), the linear decrease of the peak current of Cu-adenine was observed, when the cyanide concentration was increased from 5×10⁻⁸ to 8×10⁻⁷ M. The detection limit was obtained as 1×10⁻⁸ M for 60 s accumulation time. The relative standard deviations for six measurements were 4 and 2% for the cyanide concentrations of 5×10⁻⁸ and 2×10⁻⁷ M, respectively. The method was applied to the determination of cyanide in various industrial waste waters such as electroplating waste water and also for determination of hydrogen cyanide in air samples.     

Simultaneous determination of N-acetyl-p-aminophenol and p-aminophenol with poly(3,4-ethylenedioxythiophene) modified glassy carbon electrode

A sensitive and selective method was developed for the determination of N-acetyl-p-aminophenol (APAP) and p-aminophenol (PAP) using poly(3,4-ethylenedioxythiophene) (PEDOT)-modified glassy carbon electrode (GCE). Cyclic voltammetry and differential pulse voltammetry were used to investigate the electrochemical reaction of APAP and PAP at the modified electrode. Both APAP and PAP showed quasireversible redox reactions with formal potentials of 367 mV and 101 mV (vs. Ag/AgCl), respectively, in phosphate buffer solution of pH 7.0. The significant peak potential difference (266 mV) between APAP and PAP enabled the simultaneous determination both species based on differential pulse voltammetry. The voltammetric responses gave linear ranges of 1.0 × 10⁻⁶-1.0 × 10⁻⁴ mol L⁻¹ and 4.0 × 10⁻⁶-3.2 × 10⁻⁴ mol L⁻¹, with detection limits of 4.0 × 10⁻⁷ mol L⁻¹ and 1.2 × 10⁻⁶ mol L⁻¹ for APAP and PAP, respectively. The method was successfully applied for the determination of APAP and PAP in pharmaceutical formulations and biological samples.     

Study on electrochemical behavior of tryptophan at a glassy carbon electrode modified with multi-walled carbon nanotubes embedded cerium hexacyanoferrate

Electrochemical behavior of cerium hexacyanoferrate (CeHCF) incorporated on multi-walled carbon nanotubes (MWNTs) modified GC electrode is investigated by scanning electron microscopy (SEM) and electrochemical techniques. The CeHCF/MWNT/GC electrode showed potent electrocatalytic activity toward the electrochemical oxidation of tryptophan in phosphate buffer solution (pH 7.0) with a diminution of the overpotential of 240 mV. The anodic peak currents increased linearly with the concentration of tryptophan in the range of 2.0 × 10⁻⁷ to 1.0 × 10⁻⁴ M with a detection limit of 2.0 × 10⁻⁸ M (at a S/N = 3). And the determination of tryptophan in pharmaceutical samples was satisfactory.     

Determination of sildenafil citrate (viagra) and its metabolite (UK-103,320) by square-wave and adsorptive stripping square-wave voltammetry. Total determination in biological samples

The voltammetric behaviour of Sildenafil citrate (SC) and its main metabolite UK-103,320 (UK) was studied by square wave techniques, leading to two methods for its total determination in biological samples (urine and human serum). The application of the square wave (SW), without the adsorptive accumulation, shows a maximum response at −0.950 V. The effect of experimental parameters that affect this determination are discussed. The stripping technique, proved to be more sensitive, yielding signals three times larger than those obtained by applying a square wave scan without the previous accumulation. Two calibration graphs to determine total SC and UK concentration were established. Calibration graph in urine sample was linear in the range 4.4×10⁻⁸ to 4.8×10⁻⁷ M by the stripping mode with an accumulation time of 10 s. In the same conditions but in serum sample regression line was linear in the range 3.4×10⁻⁸ to 9.7×10⁻⁷ M. The two proposed methods (SW and square-wave adsorptive stripping voltammetry (SWAdSV)) were applied to the total concentration analysis in eight different biological samples by the standard addition method with satisfactory results in the four different serum samples by the SW and in the four urines by SWAdSV.