Ultrasonic energy as a tool in the sample treatment for polymer characterization through matrix-assisted laser desorption ionization time-of-flight mass spectrometry

Different ultrasonic devices including ultrasonic bath with dual frequency, sonoreactor and ultrasonic probe, were tested for their viability in the sample treatment for polymer characterization by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry analysis. The effect of sonication frequency (35 kHz, 40 kHz and 130 kHz), sonication amplitude, and sonication time on the polymer's number-average molecular weight (M_n) and weight-average molecular weight (M_w) were investigated. The effect of those variables in the molecular mass distribution of three polymer standards, poly(styrene) 2000 Da and 10,000 Da and poly(ethylene glycol) 1000 Da, was evaluated. In addition, the influence of ultrasonic energy on the sample treatment as a function of the matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI) matrix was also studied through two common standard matrices, dithranol and 2,5-dihydroxybenzoic acid. The results obtained show that the ultrasonic bath at 35 kHz is the best option for the purpose of fast sample treatment for polymer characterization. The M_n and M_w values obtained for this ultrasonic device and for the three polymers tested using dithranol as MALDI matrix, were not statistically different from the ones acquired with vortex mixing and also were in concordance with the values recommended by the polymer manufacturers.     

Extraction of surfactin from fermentation broth with n-hexane in microporous PVDF hollow fibers: Significance of membrane adsorption

In order to avoid foaming behavior and the formation of stable emulsions in traditional extraction, non-dispersive extraction of surfactin from the fermentation broth of Bacillus subtilis ATCC 21332 culture with n-hexane was studied in microporous polyvinylidene fluoride (PVDF, pore size 0.2 μm) hollow fiber module. In this work, the broth was pretreated by acid precipitation and the precipitate was then dissolved in NaOH solution, and the treated broth was passed through the lumen side of the module and n-hexane was flowed across the shell side. Experiments were performed at a fixed pH of 8.0 and a flow rate of both phases of 2.5 mL min⁻¹ but at different surfactin concentrations (300–3000 mg L⁻¹). Under the conditions studied, it was shown that surfactin was adsorbed onto the surface of the fibers, instead of being extracted by n-hexane and transported through the pores of the fibers into bulk n-hexane phase. The adsorption capacity was determined and the adsorption dynamics was analyzed. The purity of surfactin desorbed from the fibers with ethanol was found to be higher than that obtained after solvent extraction with n-hexane.     

Optimisation of microwave-assisted extraction for the determination of nonylphenols and phthalate esters in sediment samples and comparison with pressurised solvent extraction

Microwave-assisted extraction (MAE) of nonylphenols (NP), nonylphenol mono- and diethoxylates (NP1EO and NP2EO, respectively) and phthalate esters was optimised using an experimental design approach. A D-optimal mixture design was used to optimise the pressure inside the extraction vessel (110-207 kPa), the extraction time (5-25 min) and the extraction solvent (methanol, acetone or n-hexane) or the solvent mixture for the microwave-assisted extraction. Percentage of microwave power (80%) and solvent volume (15 ml) were fixed in all the experiments. As a consequence, the optimum extraction of these compounds was carried out at an intermediate pressure (159 kPa) with pure methanol and during 15 min. Moreover, solid phase extraction was also optimised for the clean-up of the extracts and C-18, LiChrolut^® and Oasis^® cartridges were studied in order to obtain the best recoveries of the compounds of interest. The highest recoveries were obtained with LiChrolut^® cartridges after the elution with ethyl acetate. The cleaned extracts were analysed in a gas chromatograph with mass spectrometric detection and in a liquid chromatograph with diode array and fluorescence detection (HPLC-DAD-UV-FLD). The same sediment was also extracted twice in order to check that an exhaustive extraction of the analytes had occurred. Finally, the optimised extraction method was compared with pressurised solvent extraction (PSE), using an estuarine sediment sample.     

Distribution of pesticides in n-hexane/water and n-hexane/acetonitrile systems and estimation of possibilities of their extraction isolation and preconcentration from various matrices

Distribution of 150 most widely used pesticides of different chemical classes (amides, anilinopirimidines, aromatics, benzenesulfonates, carbamates, dicarboximides, organophosphorus compounds, phenyl esters, phenylureas, pyrazoles, pyrethroids, pyrimidines, strobilurins, sulfamides, triazines, triazoles, etc.) in n-hexane/water and n-hexane/acetonitrile systems was investigated at 25 °C. Distribution constants of pesticides (P) have been calculated as ratio of pesticide concentration in n-hexane to its concentration in water or acetonitrile phase. HPLC and GC methods were used for pesticides determination in phases. It was found that the overwhelming majority of pesticides are hydrophobic, i.e. in n-hexane/water system Lg P ? 0, and the difference in Lg P values can reach 9.1 units. Replacement of water for acetonitrile leads to dramatic fall of Lg P values reaching 9.5 units. The majority of Lg P values in this case are negative and their differences is strongly leveled in comparison with a hexane/water system. Thus, maximal difference in pesticides Lg P values for n-hexane/acetonitrile system is 3.2 units. It is shown that n-hexane can be used for selective and efficient extraction and preconcentration of pesticides from water matrices. On the other hand, acetonitrile is effective for the isolation and preconcentration of pesticides from hydrocarbon and vegetable oil matrices. The distribution constants described in the paper may be effectively used for the estimation of possibilities of extraction isolation, preconcentration and separation of pesticides.     

Application of enzymatic probe sonication extraction for the determination of selected veterinary antibiotics and their main metabolites in fish and mussel samples

A new method based on enzymatic probe sonication extraction prior to high-performance liquid chromatography (HPLC) has been developed for the determination of 11 antibiotics (drugs) and the main metabolites of five of them in fish tissue and mussel samples. The analytes belong to four different classes of antibiotics (sulfonamides, tetracyclines, penicillins and amphenicols). The analysed compounds were sulfadiazine (SDI) and N⁴-acetylsulfadiazine (NDI) metabolite, sulfamethazine (SMZ) and N⁴-acetylsulfamethazine (NMZ), sulfamerazine (SMR) and N⁴-acetylsulfamerazine (NMR), sulfamethoxazole (SMX), trimetroprim (TMP), amoxicillin (AMX) and its main metabolite amoxicilloic acid (AMA), ampicillin (AMP) and its main metabolite ampicilloic acid (APA), chloramphenicol (CLF), thiamphenicol (TIF), oxytetracycline (OXT) and chlortetracycline (CLT).The main factors affecting the extraction efficiency (type of enzyme, type and volume of extractant, ultrasounds power and extraction time) were optimised in tissue of hake (Merluccius merluccius), anchovy (Engraulis encrasicolus), mussel (Mytilus sp.) and wedge sole (Solea solea). The extraction was carried out using an extraction time of 5 min with 5 mL of water and subsequent clean-up with dichloromethane.High-performance liquid chromatography (HPLC) with diode array (DAD) and fluorescence (FLD) detectors was used for the determination of the antibiotics. The separation of the analysed compounds was conducted by means of a Phenomenex^® Gemini C₁₈ (150 mm × 4.6 mm I.D., particle size 5 μm) analytical column with LiChroCART^® LiChrospher^® C₁₈ (4 mm × 4 mm, particle size 5 μm) guard-column. Analysed drugs were determined using formic acid 0.1% (v/v) in water and acetonitrile in gradient elution mode as mobile phase. The proposed method was also evaluated by a laboratory assay consisting of the determination of the targeted analytes in samples of Cyprinus carpio which had previously administered the antibiotics.     

Ultrasound-assisted matrix solid-phase dispersive liquid extraction for the determination of intermediates in hair dyes with ion chromatography

A novel one-step sample preparation technique called ultrasound-assisted matrix solid-phase dispersive liquid extraction was developed. After sample matrices being dispersed, target analytes were extracted into acid solutions and fat and lipin were dissolved in n-hexane while the interfering components were retained by dispersing sorbent. The extraction process could be rapidly accomplished within 9 min with high sample throughput under the synergistic effects of vibration, ultrasound action and heating. The extraction efficiency of approach was demonstrated for the determination of intermediates in commercial hair dyes with ion chromatography. Linearity ranges of 0.2–100 mg L⁻¹ and detection limits varying from 0.019 to 0.048 mg L⁻¹ were achieved. The recoveries ranged from 85.7 to 107.0% with the relative standard deviations (RSDs) of 0.31–3.7%. These results showed that the method was simple, time-saving, reliable and suitable for the routine analysis of intermediates in large numbers of hair dyes.     

Revisiting extraction of bioactive apocarotenoids from Crocus sativus L. dry stigmas (saffron)

An ultrasound assisted extraction method is proposed for the recovery of bioactive glycosides (i.e. crocins and picrocrocin) from Crocus sativus L. dry stigmas using aqueous methanol. Response surface methodology (RSM) was employed to optimize the extraction parameters, namely, the percentage of methanol (%), the duration (min) and the duty cycles (s) of sonication. Optical microscopy, spectrophotometry and RP-HPLC-DAD were employed to follow pros and cons of the process. Additional experiments were conducted to compare recoveries with those under other agitation conditions (e.g. magnetic stirring according to ISO 3632-2 standard). The percentage of methanol, the sonication duration and duty cycles combination that can be recommended as optimum for the recovery of crocins and picrocrocin were 50%, 30 min, 0.2 s and 0.44%, 30 min, 0.6 s, respectively. Picrocrocin levels were not influenced dramatically under the optimum conditions for crocins extraction (11 ± 2 instead of 12 ± 1 mg kg⁻¹ dry stigmas, respectively) so that these can be considered optimum for both categories of tested compounds. Ultrasound assisted extraction speeded up further recovery of these precious apocarotenoids. Our findings for extraction conditions are useful for both industrial and analytical applications and should be considered in a forthcoming revision of the ISO 3632-2 technical standard.     

Evaluation of surfactant assisted pressurized liquid extraction for the determination of glycyrrhizin and ephedrine in medicinal plants

Surfactant assisted pressurized liquid extraction (PLE) with a laboratory made system was applied for the extraction of glycyrrhizin in Radix glycyrrhizae/liquorice and ephedrine in Ephedra sinica. The proposed system set-up for this current work was simpler as no heating and back pressure regulator was required. Extraction with surfactant assisted PLE was carried out dynamically at a flow of 1.5 mL min⁻¹, at room temperature, under an applied pressure of 10-20 bar with an extraction time of 45-50 min. The extraction efficiencies of the proposed method using surfactants such as sodium dodecyl sulfate (SDS) and Triton X-100 were compared with sonication using organic solvent for different batches of medicinal plants materials. For the determination of glycyrrhizin in R. glycyrrhizae, the extraction efficiencies of surfactant assisted PLE with SDS and Triton X-100 was observed to be comparable with sonication. The method precision was found to vary from 1.6 to 2.6% (R.S.D., n = 6) on different days. For ephedrine in E. sinica, surfactant assisted PLE with SDS was found to give higher extraction efficiencies compared to Triton X-100. The overall method precision for surfactant assisted PLE with SDS for ephedrine in E. sinica was found to vary from 1.5 to 4.1% (R.S.D., n = 6) on different days. The marker compounds present in the various medicinal plant extracts were determined by gradient elution HPLC. Our data showed the possibility of PLE at room temperature and the advantages of eliminating the use of organic solvents in the extraction process.     

In-vial liquid–liquid microextraction-capillary electrophoresis method for the determination of phenolic acids in vegetable oils

An in-vial liquid–liquid microextraction method was developed for the selective extraction of the phenolic acids (caffeic, gallic, cinnamic, ferulic, chlorogenic, syringic, vanillic, benzoic, p-hydroxybenzoic, 2,4-dihydroxybenzoic, o-coumaric, m-coumaric and p-coumaric) in vegetable oil samples. The optimised extraction conditions for 20 g sample were: volume of diluent (n-hexane), 2 mL; extractant, methanol: 5 mM sodium hydroxide (60:40; v/v); volume of extractant, 300 μL (twice); vortex, 1 min; centrifugation, 5 min. Recoveries for the studied phenolic acids were 80.1–119.5%. The simultaneous determination of the phenolic acid extracts was investigated by capillary electrophoresis (CE). Separations were carried out on a bare fused-silica capillary (50 μm i.d. × 40 cm length) involving 25 mM sodium tetraborate (pH 9.15) and 5% methanol as CE background electrolyte in the normal polarity mode, voltage of 30 kV, temperature of 25 °C, injection time of 4 s (50 mbar) and electropherograms were recorded at 200 nm. The phenolic acids were successfully separated in less than 10 min. The validated in-vial LLME-CE method was applied to the determination of phenolic acids in vegetable oil samples (extra virgin olive oil, virgin olive oil, pure olive oil, walnut oil and grapeseed oil). The developed method shows significant advantages over the current methods as lengthy evaporation step is not required.     

Optimisation of a matrix solid-phase dispersion method for the determination of organophosphate compounds in dust samples

A fast and inexpensive sample preparation procedure based on the matrix solid-phase dispersion (MSPD) technique is proposed for the isolation of several organophosphate esters (mainly employed as flame retardants and plasticizers) from indoor dust samples. Extraction and clean-up were carried out in a single step and target compounds were determined by gas chromatography (GC) with nitrogen-phosphorus detection (NPD). The main parameters affecting extraction yield and selectivity, such as type and amount of dispersant material, clean-up co-sorbent and extraction solvent, were evaluated and optimised. Under final conditions, 0.5 g of dust were dispersed with equal amounts of anhydrous sodium sulphate and Florisil, and loaded on the top of a polypropylene cartridge containing 0.5 g of alumina. The dispersed sample was washed with 2 mL of n-hexane to remove the least polar interferences and analytes were eluted with 3 mL of acetone. Recoveries of the proposed method for spiked samples ranged from 80 to 116%, and the day-to-day variability remained between 5 and 10%. Data on levels of organophosphate species in dust from private houses and vehicle cabins are provided. In both cases, the lowest concentrations corresponded to the short chain, non-chlorinated, alkyl organophosphates, whereas mean values above 1 μg g⁻¹ were measured for the rest of analytes.     

Liquid–liquid equilibrium data for binary perfluoroalkane (C6 and C8) + n-alkane systems

This study aims to make detailed measurements of the solubility data for perfluoroalkane + n-alkane systems. Using a laser-scattering technique developed in our laboratory, we determined the liquid–liquid equilibria (LLE) for three binary mixtures: perfluorohexane + n-hexane, perfluorohexane + n-octane, and perfluorooctane + n-octane. The experimental LLE data were represented by the NRTL equation. In addition, the activity coefficients obtained from the experimental LLE data were compared with those obtained from the vapor–liquid equilibrium (VLE) data.     

Development of an ultrasound-assisted extraction method for biomonitoring of vanadium and nickel in the coastal environment under the influence of the Prestige fuel spill (North east Atlantic Ocean)

As a consequence of the Prestige shipwreck occurred in the Northeast Atlantic Ocean in November 2002, the need for establishing the environmental impact caused by metals has been of primary concern. Among the different metals contained in the fuel spill, V and Ni are particularly of interest since they appear at relatively high concentration in the original fuel. Biomonitoring of V and Ni using wild mussels (Mytilus edulis) collected along the Galician Coast (NW Iberian Peninsula) has been performed. Ultrasound-assisted extraction of V and Ni from dried mussel tissues using probe sonication allowed a fast solid-liquid extraction thus facilitating sample preparation from large sample batches used for biomonitoring. V and Ni were determined in shellfish caught in the Galician littoral and tar balls from the Prestige spill by electrothermal-atomic absorption spectrometry and inductively coupled plasma-optical emission spectrometry, respectively. A Plackett-Burman saturated design was applied for screening optimization of variables influencing the ultrasound-assisted extraction of V and Ni from shellfish. Efficient extraction of both metals was obtained from slurries prepared in 2 mL capacity sample vials (10 mg sample with a particle size less than 100 μm) using a 3% (v/v) HNO₃ diluent and subjected to probe sonication (3 min; 30% vibrational amplitude of the probe). The method was successfully validated by means of three certified reference materials: NRCC-TORT-2 Lobster hepatopancreas, NIST-SRM 1566b Oyster tissue and NIST-SRM 2977 Mussel tissue. The detection limit (LOD) of V and Ni in the marine biological tissues, calculated according to the 3σ criterion, were 0.24 μg g⁻¹ and 0.15 μg g⁻¹ for V and Ni, respectively. V and Ni concentrations in M. edulis were in the range 1.7-4.8 and 0.8-2.8 μg g⁻¹, respectively. Whilst no significant variations in Ni contents were observed in regard to reference values, an important increase in V concentration is observed at some sampling points, thereby indicating bioaccumulation.     

Headspace solid-phase micro-extraction gas chromatography-mass detection method for the determination of butyltin compounds in wines

Butyltin compounds are widespread contaminants which have also been found in some wines, determined by liquid-liquid extraction followed by alkylation with a Grignard reagent and gas chromatography-mass spectrometric (GC-MS) analysis. A promising alternative to this extraction/derivatization method is the one-step tetraethylborate in situ ethylation/solid-phase micro-extraction (SPME) method. In this work, a SPME-GC-MS method for the determination of butyltin compounds in wine was optimised. The optimised parameters concerned the pre-treatment with tetramethylammonium hydroxide, matrix modification with sodium chloride, tetraethylborate concentration, extraction time and temperature, and the GC separation program. The analytical figures of merit of the optimised method (range, limit of detection (LOD) and reproducibility) were evaluated. The sensitivity (range 20-1421 kcounts μg⁻¹ l⁻¹ as Sn) and LOD (range, 0.01-0.2 μg l⁻¹ as Sn) depended greatly on the butyltin species to be measured and on the type of wine. For the tested species (monobutyltin, dibutyltin and tributyltin) the highest sensitivities were achieved for Port wine samples, followed by red wine>white wine>white Verde wine. The method allowed acceptable repeatability (relative standard deviation (R.S.D.), 6-8%; n=4) and reproducibility (R.S.D., 8-9%; n=3).     

Optimisation of focused ultrasound extraction (FUSE) and microwave-assisted extraction (MAE) of hydrocarbons in geological chert samples

The analysis of hydrocarbons in chert rocks provides a worthwhile source of information regarding the geochemical features of a depositional setting. Since the typical analytical procedure requires long Soxhlet extractions and the use of large quantities of sample (30-50 g), in this work we have optimised the focused ultrasound extraction (FUSE) and the microwave-assisted extraction (MAE) to make available a less severe procedure. In both cases a full experimental design including solvent mixture composition (Dichloromethane/Hexane/Acetone) and process variables (sonication time and cycles, and extraction temperature and time) by means of D-optimal designs. In the extracted fractions hydrocarbons (C₁₆-C₄₀) were analysed by gas-chromatography-mass spectrometry. In the case of FUSE the process variables were the most sensitive variables and the optimum conditions were defined at 60:40 DCM/Hex mixture and a sonication time of 30 min and 9 cycles. In the case of MAE all the variables shown a significant effect on the extraction yield and the most adequate conditions (60:30:10 DCM/Hex/Ace mixture and an irradiation time of 15 min at 110 °C) were established from the analysis of the response surface. Both methods were systematically applied with different chert samples collected in Cucho (Trebiño County, Burgos, Spain) and we were able to assure quantitative extractions (>85%) in the first extraction. Additionally, from the distribution patterns of n-alkanes obtained in the different chert samples (nodular chert, laminar chert and massive-brechoid chert) collected in Cucho, we were able to distinguish different origins and diagenetic history.     

Optimization and validation of a low temperature microwave-assisted extraction method for analysis of polycyclic aromatic hydrocarbons in airborne particulate matter

A low temperature microwave-assisted extraction method (MAE) is reported for the analysis of polycyclic aromatic hydrocarbons (PAHs) in airborne particulate matter (PM). The main parameters affecting the extraction efficiency (choice of extractants, microwave power, and extraction time) were investigated and optimized. The optimized procedure requires a 20 ml mixture of acetone:n-hexane (1:1) for extraction of PAHs in PM at 150 W of microwave energy (20 min extraction time). Clean-up of MAE extracts was not found to be necessary. The optimized method was validated using two different SRM (1648-urban particulate matter and 1649a, urban dust). The results obtained are in good agreement with certified values. PAHs recoveries for both reference materials were between 79 and 122% with relative standard deviation ranging from 3 to 21%. Detection limits were determined based on blank determination using two kinds of quartz filter substrates (n = 10), which ranged from 0.001 (0.03) ng m⁻³ (pg/μg) for B(k)Ft to 1.119 (37.3) for Naph in ng m⁻³ (pg/μg), respectively. The repeatability and day-to-day reproducibility obtained in this study were in the range of 4-16 and 3-25% for spiked standards and SRM 1649, respectively. The optimized and validated MAE technique was applied to the extraction of PAHs from a set of real world PM samples collected in Singapore. The sum of particulate-bound PAHs in outdoor PM ranged from 1.05 to 3.45 ng m⁻³ while that in indoor PM (cooking emissions) ranged from 27.6 to 75.7 ng m⁻³, respectively.     

Scaling function of critical binary mixtures: Nitrobenzene-n-hexane data revisited

Ultrasonic attenuation spectra of the nitrobenzene-n-hexane mixture of critical composition have been analysed. Data between 50 kHz and 1 GHz from different sources have been included to show that at a given temperature the spectra, in addition to the critical contribution, reveal a non-critical relaxation term. Taking this additional term into account inconsistencies in the scaling function reported in the literature are avoided. In the final analysis the scaling function of the nitrobenzene-n-hexane system follows the predictions of the Bhattacharjee-Ferrell theory with critical amplitude and relaxation rate of concentration fluctuations in nice agreement with determinations from independent methods. The low-frequency attenuation data are briefly discussed with a view to a bulk viscosity approach which yields a slightly different proportionality constant in the linear regime of the scaling function than the Bhattacharjee-Ferrell theory. Evidence in favour of the latter is obtained.     

HPLC-UV and HPLC-MSn multiresidue determination of amidosulfuron, azimsulfuron, nicosulfuron, rimsulfuron, thifensulfuron methyl, tribenuron methyl and azoxystrobin in surface waters

The paper presents a new HPLC method, with UV and MSⁿ detection, for the determination of seven pesticides, including the sulfonylurea herbicides amidosulfuron, azimsulfuron, nicosulfuron, rimsulfuron, thifensulfuron methyl, tribenuron methyl, and the fungicide azoxystrobin characterised by a methoxyacrilate structure. The methodology consists of a preconcentration/SPE (solid phase extraction) step and HPLC-UV (240 nm detection wavelength)-MSⁿ analysis. Under the optimised conditions and after a 1000/1 preconcentration factor, the limits of detection were lower than 14.5 ng L⁻¹ for UV detection and lower than 8.1 ng L⁻¹ for MS detection. The limits of quantification were lower than 48.3 ng L⁻¹ in UV detection and than 26.9 ng L⁻¹ in MSⁿ detection. The analysis of two samples, spiked with a mixture of the pesticides at threshold level concentrations, gave more than 60% recovery.     

Physical properties of 3-methyl-N-butylpyridinium tricyanomethanide and ternary LLE data with an aromatic and an aliphatic hydrocarbon at T = (303.2 and 328.2) K and p = 0.1 MPa

Several physical properties were determined for the ionic liquid 3-methyl-N-butylpyridinium tricyanomethanide ([3-mebupy]C(CN)₃): liquid density, viscosity, surface tension, thermal stability and heat capacity in the temperature range from (283.2 to 363.2) K and at 0.1 MPa. The density and the surface tension could well be correlated with linear equations and the viscosity with a Vogel-Fulcher-Tamman equation. The IL is stable up to a temperature of 420 K.Ternary data for the systems {benzene + n-hexane, toluene + n-heptane, and p-xylene + n-octane + [3-mebupy]C(CN)₃} were determined at T = (303.2 and 328.2) K and p = 0.1 MPa. All experimental data were well correlated with the NRTL model. The experimental and calculated aromatic/aliphatic selectivities are in good agreement with each other.     

Ultrasonic solvent extraction of organochlorine pesticides from soil

Ultrasonic solvent extraction of the organochlorine pesticides (OCP) including α-, β-, γ- and Δ-hexachlorocyclohexane (HCH), heptachlor, aldrin, o,p′-DDE, dieldrin, p,p′-DDE, p,p′-DDT, methoxychlor, mirex from soil is reported. The extraction procedure was optimized with regard to the solvent type, amount of solvent, duration of sonication and number of extraction steps. Determination of pesticides was carried out by gas chromatography (GC) equipped with electron capture detection (ECD). Twice ultrasonic extraction using 25 mL of a mixture of petroleum ether and acetone (1/1 v/v) for 20 min of sonication showed satisfactory extraction efficiency. Recoveries of pesticides from fortified soil samples are over 88% for three different fortification levels between 15 and 200 μg kg⁻¹, and relative standard deviations of the recoveries are generally below 6%. Real soil samples were analyzed for OCP residues by optimized ultrasonic solvent extraction and shake-flask as well as soxhlet extraction technique. Investigated all extraction methods showed comparable extraction efficiencies. Optimized ultrasonic solvent extraction is the most rapid procedure because the use of time in ultrasonic extraction was considerably reduced compared to shake-flask and soxhlet extraction.     

Selection of entrainers in the 1-hexene/n-hexane system with a limited solubility

Vapor-liquid equilibria (VLE) have been measured for five 1-hexene/n-hexane/ionic liquid systems and 1-hexene/n-hexane/NMP (N-methyl-2-pyrrolidone) system with a headspace-gas chromatography (HSGC) apparatus at 333.15 K. The ionic liquids investigated were 1,3-dimethylimidazolium tetrafluoroborate [C₂MIM]⁺[BF₄]⁻, 1-butyl-3-methylimidazolium tetrafluoroborate [C₄MIM]⁺[BF₄]⁻, 1-methyl-3-octylimidazolium tetrafluoroborate [C₈MIM]⁺[BF₄]⁻, 1,3-dimethylimidazolium dicyanamide [C₂MIM]⁺[N(CN)₂]⁻ and 1-octylquinolinium bis(trifluoromethylsulfonyl)amide [C₈Chin]⁺[BTA]⁻. It was found that at low feeding concentration of 1-hexene and n-hexane, the separation ability of ionic liquids is in the order of [C₂MIM]⁺[BF₄]⁻ > [C₄MIM]⁺[BF₄]⁻ ≈ [C₂MIM]⁺[N(CN)₂]⁻ > [C₈MIM]⁺[BF₄]⁻ > [C₈Chin]⁺[BTA]⁻, which is consistent with the priori prediction of the COSMO-RS (conductor-like screening model for real solvents) model. But at high feeding concentration, the separation ability of ionic liquids is in the order of [C₂MIM]⁺[BF₄]⁻ < [C₄MIM]⁺[BF₄]⁻ ≈ [C₂MIM]⁺[N(CN)₂]⁻ < [C₈MIM]⁺[BF₄]⁻ < [C₈Chin]⁺[BTA]⁻. The liquid demixing effect should be taken into account. The activity coefficients of 1-hexene and n-hexane at infinite dilution calculated with the COSMO-RS model were correlated using the NRTL, Wilson and UNIQUAC model. In this work the predictive results from the COSMO-RS model and UNIFAC model for the 1-hexene/n-hexane and 1-hexene/n-hexane/NMP systems were compared. The UNIFAC model is one of the most important academic contributions by Prof. Jürgen Gmehling.