Feasibility of application of conductometric biosensor based on acetylcholinesterase for the inhibitory analysis of toxic compounds of different nature

This study was aimed at the development of a conductometric biosensor based on acetylcholinesterase considering the feasibility of its application for the inhibitory analysis of various toxicants. In this paper, the optimum conditions for enzyme immobilization on the transducer surface are selected as well as the optimum concentration of substrate for inhibitory analysis. Sensitivity of the developed biosensor to different classes of toxic compounds (organophosphorus pesticides, heavy metal ions, surfactants, aflatoxin, glycoalkaloids) was tested. It is shown that the developed biosensor can be successfully used for the analysis of pesticides and mycotoxins, as well as for determination of total toxicity of the samples. A new method of biosensor analysis of toxic substances of different classes in complex multicomponent aqueous samples is proposed.     

Extraction and determination of the potato glycoalkaloid α -solanine in soil

The toxic glycoalkaloids α-solanine and α-chaconine are produced in all parts of the potato plant, and post-harvest potato tubers may represent a source of soil and water contamination. A new method was developed for extraction and purification of α-solanine in soil samples. Soil samples were extracted with THF?:?H₂O?:?ACN?:?CH₃COOH (50?:?30?:?20?:?1) and the extract purified by SPE before HPLC determination of α-solanine. The limit of detection was 2.4?mg of α-solanine?kg^?1 soil. The new procedure was used for determination of α-solanine in spiked soils with varying content of organic matter and texture. Recovery for soil samples spiked with α-solanine 1?h before extraction was 61–68% for soils low in organic carbon (<2.2% C), and to 47% for soil high in organic carbon. Similar recoveries were obtained for α-chaconine. The reproducibility of the method shown by the relative standard deviation varied from 1.7 to 10.1%, depending on the soil type. No decrease in extractable α-solanine was observed until day 17 for soil samples spiked with pure α-solanine kept at 5°C, while the content in samples spiked with potato materials showed a faster decline. This indicates that the degradation and/or ageing processes proceed relatively slowly for glycoalkaloids in soil matrices. This is the first method reported for determination of potato glycoalkaloids in soil.     

Assay of Glomalin Using a Quartz Crystal Microbalance Biosensor

Glomalin is a soil protein abundantly occurring in the soil. In the current time, knowledge about glomalin is limited and there are also missing simple test for the determination of glomalin in the environment. This work is devoted to construction of a biosensor which is expected to be a simple device for the determination of glomalin in extracts from soil samples. The biosensor was constructed using an antibody against glomalin and piezoelectric quartz crystal microbalance (QCM) sensor platform allowing label free assay. Electrodes of QCM were activated using cysteamine and glutaraldehyde and finally, an antibody against glomalin was immobilized. Glomalin was acquired from various soil samples by extraction in an autoclave and its content was determined by a standard spectrophotometric test. Time necessary to bind sufficient amount of glomalin was discovered for the biosensor and four hours incubation interval corresponded with maximal efficacy. Limit of detection for the biosensor based assay was found to be equal to 3.40 μg/g which is enough to cover all the tested soil samples containing glomalin in a concentration from 291 μg/g to 3.47 mg/g. The assay also fully correlated with the standard tests. In a conclusion, the piezoelectric biosensor seems to be a suitable platform for the determination of glomalin in samples of environment origin. The method represents an improvement of the current analytical platforms that are based on measurement of total protein content in soil extract.     

An interference-free first generation alcohol biosensor based on a gold electrode modified by an overoxidised non-conducting polypyrrole film

An interference-free first generation alcohol biosensor based on alcohol oxidase immobilized, by glutaraldehyde co-crosslinking with bovine serum albumin, on a perm-selective electropolymerized film modified gold electrode is described. The use, in place of platinum, of a gold electrode, properly conditioned by an electrochemical pre-treatment, allowed the elimination of the electrode fouling and of the interference caused by the direct alcohol oxidation at the electrode surface. The efficiency of overoxidized polypyrrole and poly-ortho-phenylendiamine as anti-interferent perm-selective films towards the most common electroactive interferents was also investigated.The low response time and the fabrication procedure employed in this study allowed the use of the biosensor in a flow injection system equipped with a conventional thin-layer electrochemical cell.The biosensor showed a high sensitivity, a good stability and a complete suppression of electroactive interferences in operational conditions. Biosensor performances were tested by the rapid determination of the alcohol content in just diluted wine samples and the results compared well with those obtained with the classical method of distillation.     

Evaluation of glycoalkaloids in tubers of genetically modified virus Y-resistant potato plants (var. Désirée) by non-aqueous capillary electrophoresis coupled with electrospray ionization mass spectrometry (NACE–ESI–MS)

The glycoalkaloid content of transgenic potatoes was evaluated by an optimised method based on non-aqueous capillary electrophoresis coupled on-line with electrospray ionization-mass spectrometry (NACE-ESI-MS). The potato material consisted of tubers from a conventional cv. Désirée and from three lines of modified plants resistant, intermediate and susceptible to infection by potato virus Y (PVY). The main glycoalkaloids were confirmed to be alpha-solanine and alpha-chaconine with parent ion masses m/z 852 and 868, respectively. In addition, an unknown minor peak at m/z 850.6 was found both in conventional (control) and susceptible line potato tubers. Such a compound exhibited an MS(2) spectrum with fragments ions at 704 and 396 m/z derived by loss of two ions, i.e. m/z 146 and 307, most likely corresponding to a rhamnose unit and a [glucose-(rhamnose)(2)] moiety, respectively. Up to 30-80-fold higher concentrations of total glycoalkaloids were found in the peel compared to flesh samples of all tubers examined. TGA content was nearly doubled in peel samples of resistant compared to control lines, and these levels were lower than the limit recommended for food safety, i.e. 20-60 mg of TGA per 100 g fresh weight. Moreover, it was established that tubers produced by virus-resistant clones are substantially equivalent in glycoalkaloid contents to those produced by conventional potato varieties.     

Potato glycoalkaloids in soil-optimising liquid chromatography-time-of-flight mass spectrometry for quantitative studies

Potato glycoalkaloids are produced in high amounts in potato fields during the growth season and losses to soil potentially impact shallow groundwater and via tiles to fresh water ecosystems. A quantitative liquid chromatography-electrospray ionization time-of-flight mass spectrometry (LC-ESI-TOF-MS) method for determination and quantification of potato glycoalkaloids and their metabolites in aqueous soil extracts was developed. The LC-ESI-TOF-MS method had linearities up to 2000microg/L for alpha-solanine and alpha-chaconine and up to 760microg/L for solanidine. No matrix effect was observed, and the detection limits found were in the range 2.2-4.7microg/L. The method enabled quantification of the potato glycoalkaloids in environmental samples.     

Rapid determination of the glucose content of molasses using a biosensor

A knowledge of the sugar content of molasses is of commercial importance to a number of industrial fermentations. Hence the feasibility of using a glucose oxidase biosensor to determine the glucose content of molasses samples was investigated. This method was compared with standard high-performance liquid chromatographic (HPLC) and gas-liquid chromatographic (GLC) procedures and with the use of a commercially available glucose analyser. A good correlation was obtained between the standard acetic anhydride GLC and glucose oxidase biosensor results (correlation coefficient = 0.98). Rapid and accurate measurements could be carried out using the biosensor without the need to employ the sample preparation step required in standard GLC methods. It was concluded that the use of the biosensor technique for the determination of glucose in molasses samples has distinct advantages over conventional methods.     

Rapid Determination of Phenolic Compounds in Water Samples: Development of a Paper‐based Nanobiosensor Modified with Functionalized Silica Nanoparticles and Potato Tissue

In this study, we present a fast, simple, low‐cost and disposable method for determination of phenolic content in water samples, using a paper based polyphenol oxidase biosensor. The propylamine functionalized silica nanoparticles was dropped onto a paper sheet. After drying at room temperature, the potato tissue extract including polyphenol oxidase was immobilized on the paper via physical and chemical adsorption. The modified paper was placed on the top of the graphite screen printed electrode. To construct of an electrochemical nanobiosensor, the electrochemical behavior of the modified electrode in different steps was investigated by cyclic voltammetry and electrochemical impedance spectroscopy methods. After being optimized the effective parameters, the changes in the biosensor electrochemical response vs. to the different concentrations of the substrate (phenol solution) were monitored by differential pulse voltammetry and amperometry methods. The linear relationships for phenol detection were obtained in the concentration ranges of 0.01–160 μM and 0.1–300 μM with a detection limit of 0.007 μM and 0.042 μM with DPV and amperometry methods, respectively. This method was successfully used in the voltammetric determination of the phenol content in the real samples, like the river water and the wastewater of wood factory.     

Potentiometric Biosensors Based on ISFETs and Immobilized Cholinesterases

This paper describes the authors' achievements in the development, investigation, and application of cholinesterase biosensors based on ISFETs. Various biosensors for determination of concentrations of different toxic substances (organophosphorous and carbamate pesticides, hypochlorite, glycoalkaloids) were designed on the basis of reversible and/or irreversible enzyme inhibition effects. The main analytical characteristics of the biosensors developed have been studied under different conditions and optimal experimental protocols for toxic substances determination have been proposed. Most of these biosensors show a high reproducibility and a good operational and storage stability. A quite good correlation with results obtained through routinely used standard methods as HPLC has been shown.     

Attenuated total reflectance infrared determination of sodium nitrilotriacetate in alkaline liquid detergents

An attenuated total reflectance infrared (ATR-FTIR) method has been developed for the direct determination of the chelating agent sodium nitrilotriacetate (NTA) in high pH cleaning formulations. Aqueous samples and standards were placed directly on the diamond ATR cell without any pre-treatment and FTIR spectra were recorded between 4000 and 600 cm⁻¹. Measurement conditions were evaluated. Results obtained for five different commercial formulations containing from 6.22 to 9.25% (w/w) of NTA were in good agreement with the manufacturer's declared content (differences between 3.2 and −3.7%). Recovery studies evidenced the accuracy of the developed method, having found values between 98.4 and 102.4%. The developed procedure provides an excellent throughput of 50 independent determinations per hour, and each measurement required only less than 0.2 ml of sample or standard.     

Simple and sensitive method for determination of glycoalkaloids in potato tubers by high-performance liquid chromatography with chemiluminescence detection

A novel, simple and sensitive high-performance liquid chromatographic method for the determination of the potato glycoalkaloids, alpha-solanine and alpha-chaconine, based on the chemiluminescent reaction of tris(2,2'-bipyridine)ruthenium(III) has been developed. The calibration graph was linear in the range of 5 ng/ml-10 microg/ml for both alpha-solanine and alpha-chaconine. The detection limits of alpha-solanine and alpha-chaconine were 1.2 and 1.3 ng/ml, respectively. This method was successfully applied to a potato tuber sample without cleanup, pre-concentration, and derivatization steps. The recoveries (mean +/- standard deviation, %) of alpha-solanine and alpha-chaconine spiked in tuber pith at 10 microg/g (n = 6) were 101.0 +/- 4.4% and 103.6 +/- 7.1%, respectively.     

Determination of the Insecticide Imidacloprid in Potato (<Emphasis Type="Italic">Solanum tuberosum</Emphasis> L.) and Onion (<Emphasis Type="Italic">Allium cepa</Emphasis>) by High-Performance Liquid Chromatography with Diode-Array Detection

A high-performance liquid chromatography (HPLC) method has been proposed for the determination of imidacloprid residues in fortified potato (Solanum tuberosum L.) and onion (Allium cepa) and in treated potato and onion samples. Sample preparation consisted of dichloromethane extraction of imidacloprid from the plant material, followed by purification of the obtained onion extract on an LC-Florisil disposable cartridge. The obtained potato extracts were further analyzed without purification. The HPLC-diode-array-detection (DAD) method has been developed on reversed phase for separation of imidacloprid with isocratic elution with a mixture of 0.01 M phosphate buffer (pH 3.15) and acetonitrile (75 : 25, v/v). Spectral data obtained with DAD allow the identification of imidacloprid residue. Detector response showed a linear dynamic range from 0.0125 to 0.500 μg/mL. Imidacloprid was recovered from fortified samples in a range of 94–99%. The within-day RSD of repeatability of the retention time of imidacloprid standard solution was less than 0.1% and of the obtained peak area less than 5%. For potato and onion samples, the limits of detection were 0.0075 and 0.0060 mg/kg and the limits of determination were 0.015 and 0.012 mg/kg, respectively. __________ From Zhurnal Analiticheskoi Khimii, Vol. 60, No. 12, 2005, pp. 1273–1278. Original English Text Copyright ? 2005 by Mandic, Lazic, Okresz, Gaal. The text was submitted by the authors in English.     

On-line microdialysis-ion chromatographic determination of inorganic anions in olive-oil mill wastewater

A fully automated method is presented for the determination of inorganic anions in olive-oil mill effluents using on-line dialysis-ion chromatography. The wastewater is first of all sonicated at room temperature to make it homogeneous, then diluted and microdialized. Most of the organic load of the effluents is removed in a few minutes without using reagents, while soluble anion quantitation remains unaffected. The clear solution is analyzed for the inorganic anions content by direct injection on to an ion chromatograph equipped with a conductivity detector. In the absence of standards, the separation efficiency of microdialysis has been investigated by spiking wastewater samples as well as standard oil emulsions with varying amounts of inorganic anions and subjecting them to microdialysis for different periods of time prior to performing instrumental analysis. Excellent spike recoveries and low relative standard deviations are obtained for all the anions if a 10 min microdialysis time is overcame. Chloride, nitrite, nitrate, phosphate and sulphate are not affected by the microdialysis procedure and their recovery is between 96 and 104% in wastewater as well as in standard oil emulsion. Calibration plots are linear over about two orders of magnitude. The dialysis membrane has been replaced after more than 100 analyses. The UV photolysis pre-treatment of the same sample evidences the different information that can be obtained by the two sample pre-treatment procedures.     

Determination of uranium in tap water by ICP-MS

A fast and accurate procedure has been developed for the determination of uranium at microg L(-1) level in tap and mineral water. The method is based on the direct introduction of samples, without any chemical pre-treatment, into an inductively coupled plasma mass spectrometer (ICP-MS). Uranium was determined at the mass number 238 using Rh as internal standard. The method provides a limit of detection of 2 ng L(-1) and a good repeatability with relative standard deviation values (RSD) about 3% for five independent analyses of samples containing 73 microg L(-1) of uranium. Recovery percentage values found for the determination of uranium in spiked natural samples varied between 91% and 106%. Results obtained are comparable with those found by radiochemical methods for natural samples and of the same order for the certified content of a reference material, thus indicating the accuracy of the ICP-MS procedure without the need of using isotope dilution. A series of mineral and tap waters from different parts of Spain and Morocco were analysed.     

A novel enzyme biosensor for steroidal glycoalkaloids detection based on pH-sensitive field effect transistors.

For the design of a biosensor sensitive to steroidal glycoalkaloids, pH-Sensitive Field Effect Transistors as transducers and immobilised butyrylcholinesterase as a biorecognition element have been used. The total potato glycoalcaloids can be measured by this biosensor in the concentration range 0.5-100 microM with detection limits of 0.5 microM for alpha-chaconine and of 2.0 microM for alpha-solanine and solanidine, respectively. The responses of the developed biosensors were reproducible with a relative standard deviation of about 1.5% and 5% for intra- and inter-sensor responses (both cases, n=10, for an alkaloid concentration of 5 microM), respectively. Moreover, due to the reversibility of the enzyme inhibition, the same sensor chip with immobilised butyrylcholinesterase can be used several times (for at least 100 measurements) after a simple washing by a buffer solution and can be stored at 4 degrees C for at least 3 months without any significant loss of the enzymatic activity.     

Flow injection analysis of L-lactate in milk and yoghurt by on-line microdialysis and amperometric detection at a disposable biosensor.

A disposable lactate biosensor able to operate in flow injection analysis is described and characterized. The biosensing layer, obtained by glutaraldehyde co-crosslinking of lactate oxidase with bovine serum albumin, was cast on an underlying electropolymerized layer of overoxidized polypyrrole. The resulting biosensor was interference-free and showed a K'M value of 2.4 mmol l-1 and a maximum current density of 440 microA cm-2. When integrated in a flow injection analysis system, a sensitivity of 300 +/- 10 nA mmol-1 l, a linear response up to 1 mmol l-1 and detection limits in the low micromolar range were obtained. The introduction of a microdialysis membrane-based sampler reduced the sensitivity to 7.9 +/- 0.2 nA mmol-1 l and extended the linear range up to 50 mmol l-1 lactate. The anti-interference characteristics of the biosensor permitted lactate determination in untreated milk and diluted yoghurt samples.     

Flow injection spectrophotometric determination of calcium, phosphate and chloride ions in milk.

Flow injection procedures for the determination of calcium, phosphate and chloride ions in milk samples are described. The reactions are based on the formation of coloured complexes and their spectrophotometric monitoring. A sample pre-treatment with acetate buffer was carried out owing to the complexity of the sample matrix. For chloride, a rapid and reliable automated procedure for direct measurement of its content in milk (using a dialyser to eliminate interferences) is also described. After optimizing the sample pre-treatment and flow injection variables, the procedures were applied to commercial milk; the results obtained agreed satisfactorily with those of the reference methods. With 50 mm3 samples, a working range of 0-15 ppm for calcium, 50-150 ppm for phosphate and 5-100 ppm for chloride is covered with a precision of better than 1.1%. The sample throughput was higher than 50 samples h-1. These preliminary experiments are the basis for the automation of the determination of calcium, phosphate and chloride ions using a computer-controlled, self-designed and laboratory-built autoanalyser.     

A fiber optic biosensor for sulfite analysis in food

The sulfite fiber optic biosensor developed herein is based on the enzymatic oxidation reaction of sulfite catalyzed by sulfite oxidase (SOD). The consumption of O(2) is measured with an O(2) fiber optic sensor which monitors the fluorescence quenching of the indicator, perylene, by molecular oxygen. Perylene is immobilized into a polymer matrix and attached to the end of a fiber bundle forming an O(2) sensor. The enzyme, sulfite oxidase is immobilized on a pre-activated membrane and mounted onto the O(2) sensor. Several analytical characteristics of this sulfite biosensor were investigated including dynamic range, reversibility, reproducibility, stability and selectivity. The sulfite contents of various food samples, e.g. dried fruits, potato flakes, lemon juice were determined and the results obtained were in good agreement with the standard AOAC method.     

Surface Plasmon Resonance imaging-based sensing for anti-bovine immunoglobulins detection in human milk and serum

Only few papers deal with Surface Plasmon Resonance imaging (SPRi) direct detection on complex matrices, limiting the biosensor application to real analytical problems. In this work a SPRi biosensor for anti-bovine IgG detection in untreated human bodily fluids, i.e. diluted human serum and milk, was developed. Enhanced levels of cow's milk antibodies in children's serum are suspected for their possible correlation with Type 1 diabetes during childhood and their detection in real samples was up to now performed by classical immunoassays based on indirect detection. The biosensor was optimised in standard samples and then in untreated human milk for anti-bovine IgG direct detection. The key novelty of the work is the evaluation of matrix effect by applying to real samples an experimental and ex ante method previously developed for SPRi signal sampling in standard solutions, called "Data Analyzer"; it punctually visualises and analyses the behaviour of receptor spots of the array, to select only spot areas with the best specific vs. unspecific signal values. In this way, benefits provide by SPRi image analysis are exploited here to quantify and minimise drawbacks due to the matrix effect, allowing to by-pass every matrix pre-treatment except dilution.     

Development of Electrochemical Biosensor Based on Nanostructured Carbon Materials for Paracetamol Determination

This work describes the development of a biosensor for paracetamol (PAR) determination based on a glassy carbon electrode (GCE) modified with multiwalled carbon nanotubes (MWCNT) and laccase enzyme (LAC), which was immobilized by means of covalent crosslinking using glutaraldehyde. Voltammetric investigations were carried out by cyclic voltammetry (CV), differential pulse voltammetry (DPV) and square wave voltammetry (SWV). The biosensor was characterized by Scanning Electron Microscope (SEM) and Fourier Transform Infrared Spectroscopy (FT‐IR). The results showed that the use of MWCNT/LAC composite increased the sensor sensitivity, compared to bare glassy carbon electrode. Factors affecting the voltammetric signals such as pH, ionic strength, scan rate and interferents were assessed. Linear range, limit of detection (LOD) and limit of quantitation (LOQ) obtained were 10–320 μmol L^?1, 7 μmol L^?1 and 10 μmol L^{? 1}, respectively. The developed biosensor was successfully applied to PAR determination in urine and pharmaceutical formulations samples, with recovery varying from 99.96 to 106.20 % in urine samples and a relative standard deviation less than 1.04 % for PAR determination in pharmaceutical formulations. Therefore, the MWCNT‐LAC/GCE exhibits excellent sensitivity and can be used to PAR determination as a viable alternative in clinical analyzes and quality control of pharmaceutical formulations, through a simple, fast and inexpensive methodology.