Sandwich-type electrochemiluminescence immunosensor based on N-(aminobutyl)-N-ethylisoluminol labeling and gold nanoparticle amplification

A novel electrochemiluminescence (ECL) sandwich-type immunosensor for human immunoglobulin G (hIgG) on a gold nanoparticle modified electrode was developed by using N-(aminobutyl)-N-ethylisoluminol (ABEI) labeling. The primary antibody, goat-anti-human IgG was first immobilized on a gold nanoparticle modified electrode, then the antigen (human IgG) and the ABEI-labeled second antibody was conjugated successively to form a sandwich-type immunocomplex. ECL was carried out with a double-step potential in carbonate buffer solution (CBS) containing 1.5 mM H₂O₂. The ECL intensity increased linearly with the concentration of hIgG over the range 5.0-100 ng/mL. The limit of detection was 1.68 ng/mL (S/N = 3). The relative standard deviation was 3.79% at 60 ng/mL (n = 9). The present immunosensor is simple and sensitive. It has been successfully applied to the detection of hIgG in human serums.     

Highly selective and sensitive thiocyanate membrane electrode based on nickel(II)-1,4,8,11,15,18,22,25-octabutoxyphthalocyanine

A highly selective membrane electrode based on nickel(II)-1,4,8,11,15,18,22,25-octabutoxyphthalocyanine (NOBP) is presented. The proposed electrode shows very good selectivity for thiocyanate ions over a wide variety of common inorganic and organic anions. The sensor displays a near Nernstian slope of −58.7 ± 0.6 mV per decade. The working concentration range of the electrode is 1.0 × 10⁻⁶ to −1.0 × 10⁻¹ M with a detection limit of 5.7 × 10⁻⁷ M (33.06 ng/mL). The response time of the sensor in whole concentration ranges is very short (<10 s). The response of the sensor is independent on the pH range of 4.3-9.8. The best performance was obtained with a membrane composition of 30% PVC, 65% dibutyl phthalate, 3% NOBP and 2% hexadecyltrimethylammonium bromide. It was successfully applied to direct determination of thiocyanate in biological samples, and as an indicator electrode for titration of thiocyanate ions with AgNO₃ solution.     

A novel capacitive immunosensor based on gold colloid monolayers associated with a sol-gel matrix

A capacitive sensing method based on self-assembling gold nanoparticles to the surface of the sol-gel modified electrode has been developed for the direct detection of the human IgG in human serum. The capacitance of the immunosensor corresponding to the concentration of human IgG is investigated by alternating current impedance. The formed mercaptopropyltriethoxysilane (MPTS) film is ultrathin; the immobilization density of antibodies is high because of high surface-volume area of the assembled gold nanoparticles and the biological macromolecules when immobilized on gold nanoparticles can retain their bioactivity. This capacitive immunosensor prepared with present method can provide high sensitivity. The linear calibration curve was obtained in the range 8.3-2128 ng/ml, with a detection limit of 3.3 ng/ml when plotted versus the logarithm of the antigen concentration. After each immunoassay, the regeneration of the electrode could be performed through washing in basic solution without obvious decrease in response. No cross-reactivity was observed with other protein species. The dependence of sol-gel modified electrode stability on the pH value and ion strength was studied. The insulating properties of the different layers of the immunosensor were also investigated.     

Label free capacitive immunosensor for detecting calpastatin — A meat tenderness biomarker

An immunological capacitive biosensor for calpastatin was developed, optimized and applied for the analysis of meat extract samples. Anti-calpastatin antibody was immobilized on a gold electrode modified with a self-assembled monolayer of mercaptoundecanoic acid and Protein A from Staphylococcus aureus, and the obtained immunosensor was inserted as the working electrode in an electrochemical cell of a flow injection system. The dynamic range of the sensor was 20 to 160 ng/mL calpastatin. The electrode could be regenerated and re-used for more than 7 days with minimal reduction in sensitivity. For the analysis of real samples, the target analyte was extracted from the Longissimus dorsi muscle from beef carcasses directly after slaughtering. The extract was analyzed both with the developed immunosensor and microtiter plate ELISA, and a good correlation was obtained. However the immunosensor offers advantages of speed, simplicity, sensitivity and possibility for miniaturization over conventional assays for calpastatin quantification.     

Electrically assisted solid-phase microextraction combined with liquid chromatography-mass spectrometry for determination of parathion in water

A novel method for electrically assisted microextraction coupled to liquid chromatography-mass spectrometry was evaluated for determination of trace levels of parathion in water. A pencil lead electrode was used in a di-electrode system to extract parathion onto the electrode surface with a reductive potential applied. The optimum extraction conditions were found to be a potential of −600 mV for 60 s in pH 2 phosphate buffer solution. The parathion was desorbed statically for 1 min and dynamically for 3 min in the commercial SPME-HPLC desorption chamber, then analyzed with LC-APCI-MS/MS. The detection limit (LOD) for parathion in water was found to be 0.3 ng/mL. The proposed technique was demonstrated to be fast, sensitive and not require a solvent sample pretreatment.     

Voltammetric detection of the α-dicarbonyl compound: Methylglyoxal as a flavoring agent in wine and beer

A simple, rapid and highly selective method for the determination of the most abundant α-dicarbonyl compound in wine and beer has been developed for the first time by employing square wave voltammetry. A novel electrochemical sensor, based on the electrodeposition of platinum nanoparticles onto single wall carbon nanotubes that were cast on a glassy carbon electrode (GCE) substrate, is presented in this paper. This modified electrode exhibited excellent catalytic activity in the electroreduction of methylglyoxal, showing much higher peak currents than those measured on an unmodified GCE. The effects of different experimental and instrumental parameters, such as solution pH and square wave frequency, were examined. The reduction peak current showed a linear range of from 0.1 × 10⁻⁶ to 100 × 10⁻⁶ M with a 0.9979 correlation coefficient; and a low detection limit of 2.8 × 10⁻⁹ M was also obtained. The proposed methodology was successfully applied to the quantitative analysis of methylglyoxal in wine and beer samples. The developed sensor possesses advantageous properties such as a high active surface area, stability, and rapid electron transfer rate, which cumulatively demonstrate high performance toward the electrocatalytic reduction and detection of methylglyoxal.     

Utilization of electrodeposition for electrothermal atomic absorption spectrometry determination of gold

Gold was determined by electrothermal atomic absorption spectrometry after electrochemical preconcentration on the graphite ridge probe used as a working electrode and sample support. The probe surface was electrochemically modified with Pd, Re and the mixture of both. The electrolysis of gold was performed under galvanostatic control at 0.5 mA. Maximum pyrolysis temperature for the probe surface modified with Pd was 1200 °C, with Re 1300 °C. The relative standard deviation for the determination of 2 μg l^− 1 Au was not higher than 5.6% (n = 8) for 2 min electrodeposition. The sensitivity of gold determination was reproducible for 300 electrodeposition and atomization cycles. When the probe surface was modified with a mixture of Pd and Re the detection limit was 31 ng l^− 1 for 2 min electrodeposition, 3.7 ng l^− 1 for 30 min, 1.5 ng l^− 1 for 1 h and 0.4 ng l^− 1 for 4 h electrodeposition, respectively. The procedure was applied to the determination of gold in river water samples. The relative standard deviation for the determination of 2.5 ng l^− 1 Au at 4 h electrodeposition time at 0.5 mA was 7.5%.     

Sandwich-type electrochemiluminescence immunosensor based on Ru-silica@Au composite nanoparticles labeled anti-AFP

A simple and sensitive sandwich-type electrochemiluminescence immunosensor for α-1-fetoprotein (AFP) on a gold nanoparticles (nano-Au) modified glassy carbon electrode (GCE) was developed by using Ru-silica (Ru(bpy)₃²⁺-doped silica) doped Au (Ru-silica@Au) composite as labels. The primary antibody, anti-AFP was first immobilized on the gold nanoparticles modified electrode due to the covalent conjugation, then the antigen and the Ru-silica@Au composite nanoparticles labeled secondary antibody was conjugated successively to form a sandwich-type immunocomplex through the specific interaction. The surfaces of Ru-silica nanoparticles were modified via the assemble of Au nanoparticles. The prepared Ru-silica@Au composite nanoparticles own the large surface area, good biocompatibility and highly effective electrochemiluminescence properties. The morphologies of the Ru-silica@Au composite nanoparticles were investigated by using transmission electronic microscope (TEM). The Ru-silica@Au composite nanoparticles labeled anti-AFP/AFP/bovine serum albumin (BSA)/anti-AFP/nano-Au modified GCE electrode was evaluated by means of cyclic voltammetry (CV) and electrogenerated chemiluminescence (ECL). The immunosensor performed high sensitivity and wide liner for detection AFP in the range of 0.05-50 ng/mL and the limit detection was 0.03 ng/mL (defined as S/N = 3).     

Surface plasmon resonance immunosensor for histamine based on an indirect competitive immunoreaction

The use of a surface plasmon resonance immunosensor for the analysis of histamine (β-imidazole ethylamine) is described. The method is based on an indirect competitive reaction of an anti-histamine antibody in a sample solution with histamine immobilized on a sensor chip and with histamine in the sample solution. A sensor chip immobilized with histamine was prepared using a self-assembly monolayer of 11-mercaptoundecanoic acid (11-MUA) as an anchor membrane, followed by an amino-coupling reaction with histamine after activation of the 11-MUA layer on the sensor chip by treatment with 1-ethyl-3-(3-dimethylaminopropyl)-carbodiimide and N-hydroxysuccinimide. The sensor chip can be reused, after regeneration with a 10 mM HCl solution, which dissociates the anti-histamine antibody complex from histamine on the sensor chip. The affinity constants for the immunocomplex of the anti-histamine antibody with histamine in the solution and for that of the anti-histamine antibody with histamine immobilized on the sensor chip were calculated to be 1.5 × 10⁷ and 7.2 × 10⁵ M⁻¹, respectively, by assuming a Langmuir-type adsorption of the anti-histamine antibody to histamine immobilized on the sensor chip. The detection limit of the method was determined to be 3 ppb.     

Highly ordered MnO2 nanowire array thin films on Ti/Si substrate as an electrode for electrochemical capacitor

AAO/Ti/Si substrate was successfully synthesized by a two-step electrochemical anodization of the aluminum film on the Ti/Si substrate and then used as template to grow nanowire arrays. The ordered MnO₂ nanowire arrays with about 40 nm diameters had been directly fabricated on AAO/Ti/Si substrate by direct current (DC) electrodeposition. The microstructure of the nanowire arrays was investigated by field-emission scanning electron microscopy, transmission electron microscopy and X-ray diffraction. Their electrochemical characterization was performed using cyclic voltammetry in 0.5 M Na₂SO₄ aqueous solution. The synthesized MnO₂ nanowires had amorphous nature until 400 °C. The deal capacitive behavior was obtained when the as-prepared sample was heat-treated at 200 °C. The specific capacitance of the electrode was about 254 F/g.     

Flow immunoassay of trinitrophenol based on a surface plasmon resonance sensor using a one-pot immunoreaction with a high molecular weight conjugate

A surface plasmon resonance (SPR) immunosensor based on a competitive immunoreaction for the determination of trinitrophenol (TNP) is described. A goat anti-mouse IgG (1st antibody), which recognizes an Fc moiety of an antibody, was immobilized on a gold film of an SPR sensor chip by physical adsorption. A TNP solution containing a fixed concentration of a mouse anti-TNP monoclonal antibody (2nd antibody) and a TNP-keyhole limpet hemocyanin (KLH) conjugate was incubated in one-pot and introduced into the sensor chip. The TNP-KLH conjugate competes with TNP for binding with the 2nd antibody. The resulting complex of the 2nd antibody with the TNP-KLH conjugate was bound to the 1st antibody, which is immobilized on the sensor chip. The SPR sensor signal based on resonance angle shift is dependent on the concentration of TNP in the incubation solution in the range from 25 ppt to 25 ppb, and the coefficient of variation of the SPR signals for the 25 ppb TNP solution was determined to be 13% (n = 4). The experimental results for the adsorption constant of the 1st antibody on the sensor chip and the binding constant of the 1st antibody complex with the 2nd antibody are discussed, together with theoretical considerations.     

Preconcentration of palladium in a flow-through electrochemical cell for determination by graphite furnace atomic absorption spectrometry

An electrochemical preconcentration at a controlled potential on the electrode in a flow-through mode followed by graphite furnace atomic absorption spectrometric (GFAAS) detection is proposed for determination of trace amounts of palladium. After electrolysis the polarization of the electrodes was changed and deposited metal was dissolved electrochemically in the presence of an appropriate stripping reagent. Conditions for the electrodeposition, such as pH of the solutions, a deposition potential, dissolution potential and a composition of stripping solution were optimised. The graphite electrode (GE) and glassy carbon electrode (GCE) were tested for the palladium reduction process. The detection limit of 0.05 ng ml⁻¹ Pd (1 pg) was obtained after palladium preconcentration on the GCE and dissolution with 0.2 mol l⁻¹ thiourea in 0.1 mol l⁻¹ HCl followed by GFAAS detection. The method was applied for the determination of palladium in spiked tap water and road dust samples.     

Optimization of some experimental parameters in the electro membrane extraction of chlorophenols from seawater

An electro membrane extraction (EME) methodology was utilized to study the isolation of some environmentally important pollutants, such as chlorophenols, from aquatic media based upon the electrokinetic migration process. The analytes were transported by application of an electrical potential difference over a supported liquid membrane (SLM). A driving force of 10 V was applied to extract the analytes through 1-octanol, used as the SLM, into a strongly alkaline solution. The alkaline acceptor solution was subsequently analyzed by high performance liquid chromatography-ultraviolet (HPLC-UV) detection. The parameters influencing electromigration, including volumes and pH of the donor and acceptor phases, the organic solvent used as the SLM, and the applied voltage and its duration, were investigated to find the most suitable extraction conditions. Since the developed method showed a rather high degree of selectivity towards pentachlorophenol (PCP), validation of the method was performed using this compound. An enrichment factor of 23 along with acceptable sample clean-up was obtained for PCP. The calibration curve showed linearity in the range of 0.5–1000 ng/mL with a coefficient of estimation corresponding to 0.999. Limits of detection and quantification, based on signal-to-noise ratios of 3 and 10, were 0.1 and 0.4 ng/mL, respectively. The relative standard deviation of the analysis at a PCP concentration of 0.5 ng/mL was found to be 6.8% (n = 6). The method was also applied to the extraction of this contaminant from seawater and an acceptable relative recovery of 74% was achieved at a concentration level of 1.0 ng/mL.     

A new electrochemical immunoassay strategy for detection of transferrin based on electrostatic interaction of natural polymers

A new electrochemical immunoassay strategy was proposed based on electrostatic interaction of natural polymers. The chitosan-entrapped carbon paste electrode (CCPE) was used as the base electrode, alginates as carriers for the reactants and horseradish peroxidase (HRP) as enzyme label in the immunoassay. The immunoassay was firstly carried out using the homogeneous competitive immune format and a very high rate of immune reaction was reached since both reacting antibodies and antigens were in a solution phase. Subsequently quick heterogeneous separation of immune complexes attached to the alginates molecule from the solution phase was realized by making use of the strongly electrostatic attraction between the protonated amino groups of chitosans on the surface of CCPE and carboxylic groups of alginates. After washing the surface of CCPE, amperometric detection with hydroquinone and hydrogen peroxide as enzymatic substrates was carried out. A new surface of CCPE for repeated use in another assay can be obtained by polishing the original used one. The feasibility of the above approach was demonstrated using transferrin and transferrin-antibody as a model system. The dynamic concentration range for transferrin assay was 1.9 to 78.8 μg ml⁻¹.     

A novel non-enzymatic glucose sensor based on Cu nanoparticle modified graphene sheets electrode

A novel, stable and sensitive non-enzymatic glucose sensor was developed by potentiostatically electrodepositing metallic Cu nanoparticles on graphene sheets. The electrochemical performance of the Cu-graphene sheets electrode for detection of glucose was investigated by cyclic voltammetry and chronamperometry. The Cu-graphene sheets electrode displayed a synergistic effect of copper nanoparticles and graphene sheets towards the oxidation of glucose in alkaline solution, showing higher oxidation current and negative shift in peak potential. At detection potential of 500 mV, the Cu-graphene electrode sensor presented a wide linear range up to 4.5 mM glucose with a detection limit of 0.5 μM (signal/noise = 3). In addition, the sensor responds very quickly (<2 s) with addition of glucose. Furthermore, the Cu-graphene sheets electrode exhibits high stability and selectivity to glucose, and the poisoning by chloride ion as well as interference from the oxidation of common interfering species (ascorbic, dopamine, uric acid and carbohydrate) are effectively avoided. The Cu-graphene sheets electrode allows highly selective and sensitive, stable and fast amperometric sensing of glucose, which is promising for the development of non-enzymatic glucose sensor.     

Amperometric morphine sensing using a molecularly imprinted polymer-modified electrode

This study incorporates morphine into a molecularly imprinted polymer (MIP) for the amperometric detection of morphine. The polymer, poly(3,4-ethylenedioxythiophene), PEDOT, is an electroactive film that catalyzes morphine oxidation and lowers the oxidization potential on an indium tin oxide (ITO) electrode. The MIP-PEDOT modified electrode is prepared by electropolymerizing PEDOT onto an ITO electrode in a 0.1 M LiClO₄ solution with template addition (morphine). After template molecule extraction, the oxidizing current of the MIP-PEDOT modified electrode is measured in a 0.1 M KCl solution (pH = 5.3) at 0.75 V (versus Ag/AgCl/sat’d KCl) with the morphine concentration varying in the 0.1-5 mM range. A linear range, displaying the relationship between steady-state currents and morphine concentrations, from 0.1 to 1 mM, is obtained. The proposed amperometric sensor could be used for morphine detection with a sensitivity of 91.86 μA/cm² per mM. A detection limit of 0.2 mM at a signal-to-noise ratio of 3 is achieved. Moreover, the proposed method can discriminate between morphine and its analogs, such as codeine.     

Amplified Electrochemical Immunoassay Using HRP Labeled Protein as an Inhibitor to Silver Deposition in the Presence of H2O2

A novel electrochemical immunosensor with amplification effect based on the enzyme inhibition of silver deposition was proposed. In this method, the capture antibody was first immobilized onto a gold electrode via a self-assembled layer. After a sandwich immunoreaction, HRP labeled antibody was bound to the gold electrode. The HRP on the electrode inhibited silver deposition when the electrode was incubated in hydroquinone-H2O2 solution and silver ion solution. The linear sweep voltammetry was chosen to detect the deposited silver and the result showed that the peak current was linearly proportional to the content of IgG in the range of 50 to 2500 ng/mL with a detection limit of 35 ng/mL.     

Biomimetic properties and surface studies of a piezoelectric caffeine sensor based on electrosynthesized polypyrrole

An approach for preparing a chemical sensor for caffeine through the combination of molecularly imprinted polypyrrole and a piezoelectric quartz transducer was proposed. The caffeine-imprinted polymer was synthesized using galvanostatic electropolymerization of pyrrole monomer directly onto one of the gold electrodes of a 9 MHz AT-cut quartz crystal in the presence of caffeine. The optimum conditions for the electrosynthesis of the reagent phase were established. Caffeine molecules were entrapped in the matrix of polymer film, and were removed by subsequent washing with water, leaving behind pores capable of recognizing the target analyte molecule.The caffeine sensor was fixed in a measuring cell and measurement of the resonant frequency of the quartz crystal as it comes in contact with the caffeine solution was carried out in a stopped flow mode. A steady-state response was achieved in about 10 min. The sensor exhibited a linear relationship between the frequency shift and the ln of caffeine concentration in the range of 0.1-10 mg/mL (correlation coefficient, r = 0.9882). The sensitivity of the sensor was about 255 Hz/ln concentration (mg/mL). A good repeatability, R.S.D. = 9 (n = 6) for 0.5 mg/mL caffeine solution was also observed. The use of the sensor can present a potential low-cost option for determining caffeine.Surface analytical techniques such as scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS) were performed on the polymer coating in order to elucidate the imprinting process and rebinding of caffeine to the polymer matrix during the sensing process. The SEM micrographs and XPS spectra revealed features and structures that could support the imprinting and recognition of caffeine molecule by the imprinted polymer.     

A new and selective and sensitive nanogold-labeled immunoresoance scattering spectral assay for trace prealbumin

A gold-labeled immunoresonance scattering spectral probe for trace prealbumin (PA) was prepared by using gold nanoparticles in size of 9.0 nm to label goat anti-human prealbumin polyclonal antibody. The immune reaction between the gold-labeled antibody and prealbumin took place in pH 7.6 Na₂HPO₄-NaH₂PO₄ buffer solution. In the presence of polyethylene glycol PEG-10000, the labeled gold nanoparticles were released and aggregated which brought the resonance scattering intensity (I_RS) at 580 nm to enhance greatly. The ΔI_RS is proportional to the prealbumin concentration in the range from 16.67 to 666.67 ng/mL, with a detection limit of 4.1 ng/mL. This simple, sensitive and selective assay was applied to determination of prealbumin in human plasma, with satisfactory results.     

Determination of tetracyclines in surface water and milk by the magnesium hydroxide coprecipitation method

A simple coprecipitation method was developed for the determination of tetracyclines (TCs) in surface water and milk by high-performance liquid chromatography with diode-array detection (HPLC–DAD). Magnesium ion was added into the surface water or the acetonitrile (MeCN) extract of milk. After alkalinization, magnesium hydroxide precipitates which had been formed can be separated from the matrix solution easily by centrifuging and then a dissolution step was performed by adding a small amount of acid. The final solution could be introduced directly into HPLC system for the determination of the analytes. Under optimal conditions, recoveries for the analysis of spiked surface water samples ranged from 83.6% to 95.1% with relative standard deviation of 2.0–5.5%. For milk samples, relative recoveries were 95.9–104.6% with relative standard deviation of 3.4–6.7%. The enrichment factors ranged from 41.5 to 48.1 for 10 mL water samples, and from 3.6 to 4.4 for 1 mL MeCN extracts of milk. Limits of detection ranged from 0.13 to 0.51 ng/mL, and from 3.0 to 8.5 ng/g for four TCs in surface water and milk samples, respectively.