Proximal heteroalkylation of monoalkoxycalix[4]arenes in synthesis of inherently chiral molecules

Proximal heteroalkylation of monoalkyl ethers of calix[4]arenes or p-tert-butylcalix[4]arenes in NaH/CH₃CN or NaOH/DMSO, respectively, was applied for synthesis of inherently chiral calixarenes with ABHH substitution pattern. The introduction by the method of (R)- or (S)-N-(α-phenylethyl)acetamide chiral auxiliary group gives mixtures of diastereomeric derivatives of inherently chiral calixarenes, which were separated by column chromatography. The chiral calixarenes were thoroughly characterized by ¹H, ¹³C NMR, and X-ray diffraction methods.     

Synthetic transformations of isoquinoline alkaloids. Synthesis of 1-halo derivatives of <Emphasis Type="Italic">endo</Emphasis>-ethenotetrahydrothebaine and their behavior in the heck reaction

Bromination of endo-ethenotetrahydrothebaine derivatives having a pyrrolidine ring fused at the C⁷-C⁸ bond, namely 1′-substituted 4,5α-epoxy-6α,14-etheno-3,6-dimethoxy-17-methyl-2′,5′,7β,8β-tetrahydro-1′H-14α-pyrrolo[3′,4′:7,8]morphinan-2′,5′-diones, 1′-aryl-4,5α-epoxy-6α,14-etheno-3,6-dimethoxy-17-methyl-2′,5′,7β,8β-tetrahydro-1′H-14α-pyrrolo[3′,4′:7,8]morphinans, and 4,5α-epoxy-6α,14-etheno-2′α-hydroxy-3,6-dimethoxy-17-methyl-1′-phenyl-2′,5′,7β,8β-tetrahydro-1′H-14α-pyrrolo[3′,4′:7,8]morpphinan-5′-one, with molecular bromine in formic acid smoothly afforded the corresponding 1-bromo derivatives. Iodination of 4,5α-epoxy-6α,14-etheno-3,6-dimethoxy-17-methyl-1′-phenyl-2′,5′,7β,8β-tetrahydro-1′H-14α-pyrrolo[3′,4′:7,8]-4,5α-epoxy-6α,14-etheno-3,6-dimethoxy-17-methyl-1′-phenyl-2′,5′,7β,8β-tetrahydro-1′H-14α-pyrrolo[3′,4′:7,8]-morphinan-2′,5′-dione with iodine(I) chloride gave 4,5α-epoxy-6α,14-etheno-1-iodo-3,6-dimethoxy-17-methyl-1′-phenyl-2′,5′,7β,8β-tetrahydro-1′H-14α-pyrrolo[3′,4′:7,8]morphinan-2′,5′-dione. The resulting 1-halo derivatives were brought into the Heck reaction with acrylic acid esters to obtain 1-[(E)-2-(alkoxycarbonyl)ethenyl]-substituted compounds. Demethylation of the 6-methoxy group in 1-bromo-endo-ethenotetrahydrothebaines was accomplished using boron(III) bromide in chloroform.     

An efficient synthesis of 5-substituted 1H-tetrazoles via B(C6F5)3 catalyzed [3+2] cycloaddition of nitriles and sodium azide

A simple and efficient protocol is developed for the synthesis of 5-substituted 1H-tetrazole derivatives from various nitriles and sodium azide (NaN₃) via [3+2] cycloaddition reaction using B(C₆F₅)₃ as a catalyst. The present synthetic method displayed significant advantages such as low catalyst loading, mild reaction conditions, low toxicity, easy work-up, high yields, and compatibility with other functional groups.     

Amide-based atropisomers in tachykinin NK1-receptor antagonists: synthesis and antagonistic activity of axially chiral N-benzylcarboxamide derivatives of 2,3,4,5-tetrahydro-6H-pyrido[2,3-b][1,5]oxazocin-6-one

A series of novel N-benzylcarboxamide derivatives of bicyclic compounds, 3,4-dihydropyrido[3,2-f][1,4]oxazepin-5(2H)-one and 2,3,4,5-tetrahydro-6H-pyrido[2,3-b][1,5]oxazocin-6-one, were synthesized by cyclization of N-benzyl-2-chloro-N-(2-hydroxyethyl)- [and -(3-hydroxypropyl)-] nicotinamides, respectively. Atropisomerism was observed in 5-[3,5-bis(trifluoromethyl)benzyl]-7-phenyl-2,3,4,5-tetrahydro-6H-pyrido[2,3-b][1,5]oxazocin-6-ones due to steric hindrance of the carboxamide moiety and restriction of its rotation. Cyclization of N-[3,5-bis(trifluoromethyl)benzyl]-2-chloro-N-[(2S)-3-hydroxy-2-methylpropyl]-5-methyl-4-phenylnicotinamide gave (3S)-5-[3,5-bis(trifluoromethyl)benzyl]-3,8-dimethyl-7-phenyl-2,3,4,5-tetrahydro-6H-pyrido[2,3b][1,5]oxazocin-6-one, which exists predominantly in the thermodynamically stable aR-conformer in CDCl₃. This compound showed excellent NK₁-antagonistic activity with IC₅₀ value (in vitro inhibition of [¹²⁵I]-Bolton-Hunter-substance P binding in human IM-9 cells) of 0.47 nM, which is ca. 200-fold more potent than that of its enantiomer, indicating that the atropisomer chirality affects NK₁-receptor recognition.     

An improved synthesis of deuterated Schöllkopf’s bis-lactim ether and its use for the asymmetric synthesis of (R)-[α-2H]-phenylalanine methyl esters

Treatment of (S)-3-isopropyl-2,5-dimethoxy-3,6-dihydropyrazine with trifluoroacetic acid in MeOD results in regioselective deuteration at its C₆-position affording its corresponding (S)-[6-²H₂]-isotopomer in excellent yield with no loss of stereochemical integrity at its C₃-stereocentre. The lithium aza-enolate of this deuterated chiral template has been alkylated with a range of substituted benzyl bromides to afford (3S,6R)-[6-²H]-3-isopropyl-6-benzyl-bis-lactim ethers that were hydrolysed to afford their corresponding (R)-[α-²H]-phenylalanine methyl esters as hydrochloride salts in good yield.     

[Cu(mim)4]2[α-Mo8O26] – A layer-type octamolybdate framework

By reaction of (NH₄)₆Mo₇O₂₄·4H₂O, Cu(NO₃)₂·2.5H₂O and 1-methylimidazole (mim) under hydrothermal conditions the novel copper molybdate [Cu(mim)₄]₂[α-Mo₈O₂₆] is obtained in the form of blue, rectangular-shaped crystals. The title compound crystallizes with monoclinic lattice symmetry in the space group P2₁/n. The predominant structural feature of the title compound is a two-dimensional framework that is constituted by [α-Mo₈O₂₆]^4?octamolybdate units as framework nods and the copper complex [Cu(mim)₄]²⁺ as a linker. In addition to single-crystal structure analysis [Cu(mim)₄]₂[α-Mo₈O₂₆] is characterized by powder diffraction as well as by FT-IR and UV–vis spectroscopy.     

Syntheses,crystal structures,and properties of Ni(II) and Co(III) complexes derived from tripod polypyridine ligands containing N7 or N6 donor set atoms

New complexes [Ni^II(pbpaen)](ClO₄)₂ (1) and [Co^III(pbpaen)](ClO₄)₃ (2) (pbpaen = N′-(pyridin-2-ylmethyl)-N,N-bis {2-[(pyridin-2-ylmethyl)amino]ethyl}ethane-1,2-diamine) have been synthesized and characterized by IR and UV–Vis spectroscopies. An X-ray structure of the nickel(II) complex shows that [Ni(pbpaen)](ClO₄)₂ (1) crystallizes in the monoclinic space group P2_1/c. The cation [Ni(pbpaen)]²⁺ is pseudo-octahedral with one of the three pyridyl nitrogen atom uncoordinated. The crystal lattice of this complex is stabilized by intra and intermolecular hydrogen bonding systems, giving one-dimensional sheets like arrays. All attempts to obtain nickel or cobalt complexes with protonated forms of the ligand resulted in isolation of only [Co^III(bpaen)](ClO₄)₃ (3) compound in which the tripod pbpaen ligand has lost one of the three pyridylmethyl groups, procuring then bpaen ligand {bpaen = N,N-bis{2-[(pyridin-2-ylmethyl)amino]ethyl}ethane-1,2-diamine}. The X-ray crystal structure reveals that the compound 3 crystallizes in the orthorhombic space group Pna2 with the Co³⁺ ion having a distorted-octahedral environment. These two ligands with strong-field N donor stabilise the +3 oxidation state of the Co center.     

From thorium phosphate hydrogenphosphate hydrate to β-thorium phosphate diphosphate: Structural evolution to a radwaste storage ceramic

β-Thorium phosphate diphosphate (β-TPD), considered as a very promising radwaste storage material, was obtained from thorium phosphate hydrogenphosphate hydrate (TPHPH) precursor through dehydration and hydrogen phosphate condensation. The structures of TPHPH, intermediate α-thorium phosphate diphosphate (α-TPD) and its hydrate (α-TPDH) have been resolved ab initio by Rietveld analysis of their synchrotron diffraction patterns. All were found orthorhombic (space group Cmcm) and similarly composed of [ThPO₄]₄⁴⁺ slabs alternating with disordered layers hosting either [HPO₄·H₂O]₂⁴⁻ (TPHPH), [P₂O₇·2H₂O]⁴⁻ (α-TPDH), or [P₂O₇]⁴⁻ (α-TPD), unlike the 3D structure of β-TPD. The diphosphate groups of α-TPD and α-TPDH are strongly bent. The irreversible transition to the final β-TPD consists in a shearing of the slabs and a reduction of the interslabs cavities that explains the stability of this high-temperature form.     

Palladium carbene complexes as persistent radicals

A series of palladium(ii) radical carbene complexes, [PC˙(sp²)P]PdI, [PC˙(sp²)P]PdBr, and [PC˙(sp²)P]PdCl (PC(sp³)H₂P = bis[2-(di-iso-propylphosphino)-phenyl]methane), is described. Compound [PC˙(sp²)P]PdI dimerizes to {[PC(sp²)P]PdI}₂ in the solid state, akin to the formation of Gomberg''s dimer. While the bromo and the iodo derivatives could be obtained from the oxidation of [PC(sp²)P]Pd(PMe₃) by the respective dihalogens, a halogen transfer reaction from CH₂Cl₂ was used for the formation of [PC˙(sp²)P]PdCl. The halogen transfer from CH₂X₂ (X = Cl, Br, I) could be used to obtain all three radical carbene palladium complexes and also allowed the isolation of [PC(CH₂)P]Pd(PMe₃), which is the result of methylene group transfer from CH₂X₂. Compound [PC(CH₂)P]Pd(PMe₃) was independently synthesized from [PC(CH₃)HP]PdCl₂, which contains a supporting ligand analogous to that of the radical carbene complexes but has one of the hydrogen atoms replaced by a methyl group. All three carbene radical species abstract a hydrogen from 9,10-dihydroanthracene or ⁿBu₃SnH.     

New functional chiral P-based ligands and application in ruthenium-catalyzed enantioselective transfer hydrogenation of ketones

Metal-catalyzed asymmetric transfer hydrogenation is a powerful and practical method for the reduction of ketones to produce the corresponding secondary alcohols, which are valuable building blocks in the pharmaceutical, perfume, and agrochemical industries. Hence, a series of novel chiral β-amino alcohols were synthesized by chiral amines with regioselective ring opening of (S)-propylene oxide or reaction with (S)-(+)-2-hydroxypropyl p-toluenesulfonate by a straightforward method. The chiral ruthenium catalytic systems generated from [Ru(arene)(μ-Cl)Cl]₂ complexes and chiral phosphinite ligands based on amino alcohol derivatives were employed in asymmetric transfer hydrogenation of ketones to give the corresponding optically active alcohols; (2S)-1-{[(2S)-2-[(diphenylphosphanyl)oxy]propyl][(1R)-1-phenylethyl]amino}propan-2-yldiphenylphosphinitobis[dichol-oro(η⁶-benzene)ruthenium(II)] acts an excellent catalyst in the reduction of α-naphthyl methyl ketone, giving the corresponding alcohol with up to 99% ee. The substituents on the backbone of the ligands were found to have a remarkable effect on both the conversion and enantioselectivity of the catalysts. Furthermore, this transfer hydrogenation is characterized by low reversibility under these conditions.     

Structural studies in the BaO-B2O3-TiO2 system by XAS and B-NMR

The structure of barium-titanium-metaborate xBaO-xB₂O₃-yTiO₂ (y=0%, 4%, 8%, 16% and x=50-y/2) amorphous and crystallized powders, obtained using a polymeric precursor method, was investigated by Ti and B K-edge X-ray absorption spectroscopy (XAS) and ¹¹B-NMR high-resolution techniques. XANES study of amorphous samples shows that Ti⁴⁺ ions exist as ^[4]Ti species associated to ^[6]Ti and ^[5]Ti species in a practically equivalent amount. After crystallization, titanium environment is predominately composed by ^[6]Ti species. According to XANES results obtained at the B K-edge, the fraction of boron in tetrahedral sites (^[4]B) reduces as the amount of TiO₂ is increased from x=0% to 4%, with a consequent increase of boron in trigonal sites (^[3]B). By a combination of ¹¹B-NMR spin-echo and triple quantum magic angle spinning (3Q-MAS) techniques, the detailed borate speciation was determined as consisting in ^[4]B and two kind of trigonal sites, ^[3]B_A and ^[3]B_B, corresponding, respectively, to borates sharing three and two O atoms with other boron units. NMR results reveal not only the reduction in boron coordination also seen by XANES but also the simultaneous reduction in the condensation degree of trigonal units, when the Ti content is increased in the glass. In crystallized samples, β-BaB₂O₄ and BaTi(BO₃)₂ phases were identified and quantified by ¹¹B-NMR.     

Synthesis and nonlinear optical properties of BaTi(BO3)2 and Ba3Ti3O6(BO3)2 crystals in glasses with high TiO2 contents

The ternary BaO-TiO₂-B₂O₃ glasses containing a large amount of TiO₂ (20-40 mol%) are prepared, and their optical basicities (Λ), the formation, structural features and second-order optical nonlinearities of BaTi(BO₃)₂ and Ba₃Ti₃O₆(BO₃)₂ crystals are examined to develop new nonlinear optical materials. It is found that the glasses with high TiO₂ contents of 30-40 mol% show large optical basicities of Λ=0.81-0.87, suggesting the high polarizabity of TiO_n polyhedra (n=4-6) in the glasses. BaTi(BO₃)₂ and Ba₃Ti₃O₆(BO₃)₂ crystals are found to be formed as main crystalline phases in the glasses. It is found that BaTi(BO₃)₂ crystals tend to orient at the surface of crystallized glasses. The new XRD pattern for the Ba₃Ti₃O₆(BO₃)₂ phase is proposed through Rietvelt analysis. The second harmonic intensities of crystallized glasses were found to be 0.8 times as large as α-quartz powders, i.e., I^2ω(sample)/I^2ω(α-quartz)=0.8, for the sample with BaTi(BO₃)₂ crystals and to be I^2ω(sample)/I^2ω(α-quartz)=68 for the sample with Ba₃Ti₃O₆(BO₃)₂ crystals. The Raman scattering spectra for these two crystalline phases are measured for the first time and their structural features are discussed.     

Eu(fod)(3) binding on the (1)H-NMR spectra of some benzo[3n]crown-n and dibenzo[3n+2]crown-n

The complexing of Eu(fod)₃ with macrocyclic ethers, benzo[15]crown-5, benzo[12]crown-4, dibenzo[20]crown-6, dibenzo[23]crown-7 and dibenzo[26]crown-8 was observed on their ¹H-NMR spectra and the selective binding constants at 400 MHz and 305 K in CDCl₃ were reported. The Eu(fod)₃ interaction displayed the selective binding role of oxygen on macrocyclic, H₂COCH₂, backbones with o- or m-dioxyphenyl groups referring the ¹H chemical shifts. The estimated equilibrium constants, K_a of 1:1 ratio of interactions were in accordance with the Eu³⁺ ionic radii to bind the oxygen sites depending on the macrocyclic size and conformation of the ethers. The minimum lanthanide-macrocyclic ether distance displayed the maximum stability so that benzo[3n]crown-n (n=4, 5) group was found to bind the Eu(fod)₃ moderately whilst dibenzo[3n+2]crown-n (n=6-8) oligomer chemical shifts were induced largely since the such Eu³⁺ complexes are more stable with larger ethyleneoxy groups.     

Interaction between cucurbit[8]uril and viologen derivatives

The interaction between cucurbit[8]uril (Q[8]) and a series of symmetric viologen derivatives having aliphatic substituents of variable length [N,N′-dialkyl-4,4′-bipyridinium dianions; alkyl = CH₃(CH₂) _n –, n = 0 (MV²⁺), 1 (EV²⁺), 2 (PV²⁺), 3 (BV²⁺), 4 (FV²⁺), 5 (HV²⁺) or 6 (SV²⁺); BPY²⁺ = diprotonated 4,4-bipyridine], determined by ¹H NMR and electronic absorption spectroscopy methods, is described. Some different binding models were observed in this work when compared to the interactions between cucurbit[7]uril (Q[7]) and these guests. The experimental results revealed that the binding site of the guests by Q[8] depended strongly on the length of the aliphatic substituents on the 4,4′-bipyridinium nucleus. While a 1:2 complex was observed for Q[8]-BPY²⁺ under acidic conditions, a 1:1 complex was formed for Q[8]-viologen derivatives with chains shorter than four carbon atoms. However, multiple Q[8] molecules could be threaded on the longer-chain FV²⁺, HV²⁺ or SV²⁺ molecules to form 2:1 and even possibly 3:1 complexes.     

The fused quinuclidine-valerolactone system Synthesis and conformation of 4-alkyl or 4-aryl-6-oxa-1-azatricyclo (4.2.2.027) dodecan-5-one

Michael addition of ethyl malonate, alkylmalonate and phenylacetate to 2-methylene-quinuclidin-3-one, followed by NaBH₄ reduction of the 3-oxo group in the resulting adduct, then acid hydrolysis and decarboxylation (in the case of malonates) gave 6-oxa-1-azatricyclo-(4.2.2.0^2,7)dodecan-5-one, its 4-alkyl and 4-aryl derivatives. A minor byproduct is 2-(trans-3-hydroxyquinuclidin-2-yl)-α-alkyl-propanoic acid which is unable to undergo cyclization to δ-lactone.     

Thebaine Adducts with Maleimides. Synthesis and Transformations

Diels-Alder reaction of thebaine with maleimides is structurally specific and yields [7,8,3′,4′ ]-succinimido-endo-ethenotetrahydrothebaines containing N′-alkyl, cycloalkyl, aralkyl or aryl substituents. N′-[1(S)-hydroxymethyl-2-methylpropyl]-succinimido-6,14-endo-ethenotetrahydrothebaine formed in reaction of S-valinol with (7α,8α)-anhydrido-6,14-endo-ethenotetrahydrothebaine. The reduction of the adducts by LiAlH₄ afforded N′-substituted 7,8-pyrrolidino-endo-ethenotetrahydrothebaines. The reduction of fused succinimides by NaBH₄ resulted in the corresponding 2′α-hydroxylactam derivatives. O-Demethylation of the tetrahydrothebaine pyrrolidine derivatives effected by BBr₃ afforded compounds of the tetrahydrooripavine series. The O-demethylation of tetrahydrothebaine succinimide derivatives gave rise to the corresponding 6-demethyl-endo-ethenotetrahydrooripavines. Alkylation conditions were found for N′-(4-hydroxyphenethyl)-substituted tetrahydrothebaine succinimide derivatives.     

Effect of the glutaraldehyde derivatives of Calix[n]arene as cross-linker reagents on lipase immobilization

Synthesis of the glutaraldehyde derivatives calix[n]arene (n = 4,6,8) (Calix[n]-GA) and using as cross-linkers for immobilization of Candida rugosa lipase (CRL) have been discussed in this paper. The amino functional calix[n]arene derivatives (Calix[n]-NH ₂) were synthesized via reduction of dinitrile, hexanitrile and octanitrile derivatives of calix[n]arenes. These amino functional calix[n]arene derivatives (Calix[n]-NH ₂) were converted to their aldehyde derivativatives with glutaraldehyde. The calix[n]arene derivatives were used in lipase immobilization in order to see the role of calix[n]arene binding site on the lipase activitiy and stability. The activity recovery of calix[n]arene-supported lipases (Calix[n]-CRL) based on the Calix[4]-CRL, Calix[6]-CRL and Calix[8]-CRL reaches to 53.5, 66.1 and 76.4%, respectively.     

Stereochemical control of calixarenes useful as rigid and conformationally diversiform platforms for molecular design

Stereochemical problems and related functions of calix[4]arenes, calix[6]arenes and their chiral derivatives have been reviewed. In p-tert-butylcalix[4]arene (1H₄) and its mono-, di-, tri-, and tetra-O-alkyl derivatives (1H₃R, 1H₂R₂,1HR₃, and 1R₄, respectively), 23 different homologues can exist (including 1H₄). We found that the OH group in the unmodified phenol unit is permeable through the calix[4]arene ring. Thus, several conformational isomers become equivalent after the ‘oxygen-through-the-annulus’ rotation of the OH group and the number of possible homologues is reduced to 13 (including 1H₃). We report in this paper the syntheses of all of these possible conformational isomers using a protection-deprotection method with a benzyl group and metal template effects. On the other hand, all possible chiral isomers that can be derived from calix[4]arene by modification of the OH groups have been systematically classified. Molecular asymmetry can be generated not only by different substituents but also by conformational isomerism. The numbers of chiral isomers are 17 for tetra-O-substituted calix[4]arenes, 9 for tri-O-substituted calix[4]arenes, 3 for di-O-substituted calix[4]arenes, and 0 for mono-O-substituted calix[4]arenes. Chiral calix[4]arenes can also be designed by the introduction of a substituent into the m-position of a phenol unit or by the use of a dissymmetric ‘stapling reaction’ in proximal phenol units. In p-tert-butylcalix[6]arene, the conformational behaviour is totally different from that in p-tert-butylcalix[4]arene. A large degree of conformational freedom remains in the framework, and both ‘oxygen-through-the-annulus rotation’ and ‘para-substituent-through-the-annulus rotation’ can take place. However, when metal cations are bound to calix[6]aryl esters, the conformation is changed to a cone type. Bridging and capping are powerful methods to immobilize the conformation of calix[6]arenes. In addition, definitive evidence for ring immobilization was obtained from the absence of racemization in the chiral calix[6]arene. A successful example of chiral recognition for α-amino acid derivatives was achieved by using chiral homooxacalix[3]arene which has ‘pseudo C₂ symmetry’. These examples indicate that calixarenes serve as rigid and conformationally diversiform platforms for the design of novel functional supramolecules.     

Stereochemie planar-chiraler Verbindungen, 3. Mitt.

1.6-Methano[10]anulene-2-carboxylic acid (6) was resolvedvia its salts with (+)-and (?)-α-phenethylamine, resp. Two crystallisations from ethanol gave optically pure6 ([α] _D ²⁰ = 250°) as has been shown by application of theNMR-method to the mixture of the diastereomeric phenethylamides of6. Starting from (+)-6 several optically active methano[10]anulenes were prepared and theirCD-spectra recorded. Amongst these are the 2-acetyl, formyl and methyl derivatives and theendo-carbinol14a accessible from the acetyl compoundvia the cyclic ketone13. The absolute configurations of all compounds were established as being (S)_p by kinetic resolutions both of the anhydride of6 with (?)-phenethylamine and of14 a with (+)-α-phenylbutyric anhydride. The applicability ofHoreau's method to compounds of type14 was checked with (+)(R)phenyl-vinyl carbinol.     

Preparation of l-serine and l-cystine stereospecifically labeled with deuterium at the β-position

The synthesis of l-serine and l-cystine stereospecifically labeled with deuterium at the β-position is described. The carboxyl group of d-serine was transformed into chirally deuterium-labeled alcohol via asymmetric reduction of 1-deuterio aldehyde, while the original hydroxymethyl group was converted into a carboxyl functionality to afford (2S,3R)-[3-²H]serine. Functional group interconversions of the hydroxyl group in the obtained deuterium-labeled l-serine gave (2R,2′R,3S,3′S)-[3,3′-²H₂]cystine.