分光光度法同时测定硅石中的铁和铝

在邻二氮菲(Phen)、铬天青S(CAS)和十四烷基二甲基苄基氯化铵(TDMBA)的共同存在下,于pH 5～6的酸性介质中,铁、铝分别生成Fe-Phen和Al-CAS-TDMBA络合物,用同一份试液,在波长510 nm测定铁,在625 nm测定铝,两种络合物互不干扰。用该法可同时测定硅石中的铁和铝。     

一种制备单分散SiO2空心微球的新方法

在乙醇/氨水介质中, 分别以分散聚合和无皂乳液聚合方法制得的不同粒径聚苯乙烯(PS)微球为模板, 以正硅酸乙酯(TEOS)为前驱体, 通过控制介质中氨水的初始体积, 一步法制得了不同粒径的单分散SiO2空心微球. 整个过程无需添加其它溶剂溶解或高温煅烧的方法来除去模板微球. 对SiO2空心微球进行测试表征, 提出了SiO2空心微球的可能形成机制.     

疏水型SiO2光学增透膜的制备

以正硅酸乙酯（TEOS）为有机醇盐前驱体,采用溶胶-凝胶技术,通过酸/碱二步法控制实验条件,结合三甲基氯硅烷（TMCS）对胶粒表面的修饰过程,制备出结构可控的疏水型SiO2薄膜.采用椭偏仪、FTIR、接触角测试仪、SEM等对薄膜的折射率、红外特性、接触角以及表面形貌等进行了测量.研究结果表明,疏水型SiO2薄膜的折射率在1.33～1.18之间连续可调;SiO2胶粒表面的亲水性－OH中的H已部分被非活性－Si(CH3)3基团取代;接触角由表面未修饰膜的40°左右增加到表面修饰膜的120°左右.     

金纳米粒子修饰毛细管硅胶整体柱的制备及其电色谱性能研究

通过毛细管硅胶整体柱表面修饰十八烷基硫醇金纳米粒子,制备了一种新型毛细管电色谱固定相.制备金纳米粒子修饰整体柱时,采用溶胶-凝胶法制备毛细管硅胶整体柱,并在其表面化学修饰3-巯基丙基三甲氧基硅烷;通过巯基基团固载金纳米粒子于整体柱上,再共价键合十八烷基硫醇于金纳米粒子表面.以甲苯为探针,对理论塔板高度与流动相线速度之间...     

丁基胺丙基硅胶毛细管整体柱的制备及其电色谱性能研究

采用溶胶-凝胶技术制备了丁基胺丙基硅胶毛细管整体柱,此整体固定相表面同时含有能产生阳极的电渗流的仲胺官能团和产生疏水作用的正丁基和丙基官能团。对所制备的整体柱电色谱性能进行了详细的表征和分析。考察了流动相pH值对电渗流的影响;对烷基苯同系物、有机酸酸性化合物和苯胺类碱性化合物保留行为进行了研究,并对其可能的保留机理进行了探讨。实验结果表明,对于中性化合物的保留机理主要基于反相作用;而对于酸性化合物的保留行为则是基于混合模式作用机理,即除了电泳作用外,还包括阴离子交换和疏水作用。碱性化合物在丁基胺丙基硅胶毛细管整体柱上的峰形较好,没有明显的峰拖尾现象。     

二氧化硅室温磷光纳米材料的制备及其细胞成像应用

利用溶胶-凝胶法制备了非金属掺杂的二氧化硅室温磷光纳米材料,探讨了这种纳米材料的可控制备、光谱性质、细胞毒性和细胞成像。通过TEM和XRD对此材料的形貌和结构进行表征。结果表明,所制备材料为二氧化硅非晶材料,粒径约为50 nm。通过荧光分光光度计对此材料的荧光和磷光光谱进行表征,结果表明,此材料最大激发峰处于280 nm,最大荧光发射峰处于335 nm,最大磷光发射峰处于440 nm。此材料还具有良好的环境稳定性,在空气中放置3个月,其磷光强度基本不发生变化,表明其具有良好的长期稳定性。 MTT及激光共聚焦显微成像分析结果表明,此材料具有良好的生物相容性且可顺利进入细胞,并定位在溶酶体,因此有望作为新型溶酶体纳米探针在生物医学领域得以广泛应用。     

Synthesis of Mesoporous Carbon Monolith by Direct Carbonization of Compressed Sucrose/Silica Composite

Mesoporous carbon monolith was synthesized by the direct carbonization of compressed sucrose/silica composite,which was prepared by using sol-gel method. The structural and textural properties of the materials were investigated by XRD,DRIFT,N2-adsorption and SEM. The characterization study shows that the resultant carbon monolith possesses a relatively high surface area,large pore volume and well interconnected pore system. Addition of a certain amount of citric acid or aluminum nitrate into the sol-gel pre...     

Stopped-flow kinetic determination of aluminum in Chinese tea leaves by fluoride ion-selective electrode potentiometry

A stopped-flow kinetic potentiometric method for the determination of aluminum is described, based on monitoring the reaction between aluminum and fluoride at pH 3.0 using fluoride ion-selective electrode. The initial rate of the reaction is proportional to the concentration of aluminum present in the solution. The method is simple and rapid and has been applied to the determination of aluminum in Chinese tea leaves after microwave digestion.     

Direct determination of trace aluminum with quercetin by reversed-phase high performance liquid chromatography

The determination of trace levels of aluminum by high performance liquid chromatography (HPLC) with spectrophotometric detection using quercetin, a bioactive substance as a pre-column reagent, is developed in this paper. The Al-quercetin chelate was separated on a reversed-phase ODS column with a mobile phase consisting of 70% water (pH 1.0 with perchloric acid) and 30% methanol, and detected at its maximum of 415 nm. The response was linear over the 1.0×10⁻⁷ to 8.0×10⁻⁵ M concentration range with a detection limit of 5.0×10⁻⁸ M and a relative standard deviation of 1.0% at the 5×10⁻⁶ M level. The analysis was free from common ions except iron, which could be successfully screened by 1,10-phenanthroline. This method has been employed to the determination of Al in environmental and biological samples. Moreover, direct speciation of labile monomeric Al, the toxic form of Al, in natural water by the present technique was explored. The coordination ratio of Al complex with quercetin was also elucidated by HPLC combined with molar ratio method. Only a 1:1 complex was formed. Because quercetin exists in body, a preliminary thinking of in vivo determination of Al is provided in this study.     

聚硅氧烷包夹聚合硅基高效液相色谱固定相的表征及其色谱性能

利用元素分析、红外光谱、扫描电镜及汞压吸附法对制备的聚硅氧烷包夹硅基反相高效液相色谱固定相进行了表征,给出了该固定相的结构信息及其与色谱性能的关系;用滴定法测定了该固定相表面硅羟基数目;考察了该固定相对碱性化合物的分离性能;由表征和色谱性能考察结果可知,该固定相表面的羟基基本被覆盖,因此,可在碱性流动相中长期使用。     

Silica gel supported AlCl3 catalyzed Friedel-Crafts acylation of aromatic compounds

<正>Silica gel supported aluminium trichloride(SiO_2-AlCl_3) has been shown to be a mild,efficient,and chemoseiective heterogeneous Lewis acid catalyst for the acylation of aromatic compounds with acid chlorides.The catalyst can be reused up to five times after simple washing with ether and is stable(as a bench top catalyst).     

Spectrofluorimetric determination of aluminum in drinking waters by sequential injection analysis

A selective procedure for the determination of Al³⁺ in drinking and natural waters is proposed. The analytical procedure is based both on the complex formation between Al³⁺ and 8-hydroxyquinoline-5-sulfonic acid (HQS) and on a fluorimetric detection of the complex. The reaction was carried out in presence of thioglycolic acid as a masking agent. This procedure has been adapted to a sequential injection analysis (SIA) system. Operative conditions both for batch and SIA procedures were investigated including reagent concentration, volumes, pH and wavelengths used for the fluorimetric detection. Batch procedure allows determination of Al³⁺ at ppb level (LOQ: 2.8 μg l⁻¹) within a working range of 2.2-300 μg l⁻¹. The SIA procedure was successfully employed for the determination of Al³⁺ in several commercial drinking and tap waters.     

聚中性红/纳米二氧化硅复合修饰电极直接测定抗坏血酸

用滴涂法和电化学聚合法制备了聚中性红/纳米二氧化硅修饰电极(PNR/nano-SiO2/GCE),并用循环伏安法和交流阻抗法研究了修饰电极表面的电化学行为。实验表明,该修饰电极对抗坏血酸(AA)表现出良好的电催化氧化性能,探讨了复合修饰电极协同增效作用的机理。用线性扫描伏安法研究了AA浓度与峰电流之间线性关系,在pH2.0的磷酸盐缓冲溶液中,AA氧化峰电流在1.8×10-6～5.0×10-3mol/L浓度范围内呈良好的线性关系,检出限为5.4×10-7mol/L(S/N=3)。该修饰电极制备简单,可用于药品及果蔬食品中抗坏血酸的直接测定。     

Silica gel ethyleneimine and its adsorption capacity for divalent Pb, Cd, and Hg

Activated silica gel was directly modified with a cyclic molecule, ethyleneimine, yielding a surface with various nitrogen basic centers, ≡Sil–O(CH₂CH₂NH)_nCH₂CH₂NH₂. Infrared spectroscopy, ¹³C NMR, thermal, and elemental analyses confirmed the covalent attachment of the organic species onto the silica matrix. The purpose of this paper is to describe the interaction involving the grafted species on silica surface with the divalent heavy cations, Pb(II), Cd(II), and Hg(II), from aqueous solutions at room temperature. The process of metal extraction was followed by the batch method and the order of the maximum extraction capacities found was: 1.27 ± 0.04, 1.02 ± 0.02, and 0.98 ± 0.01 mmol g⁻¹ for Pb(II), Cd(II), and Hg(II) chlorides, respectively. These interactions were followed by calorimetric titration. The enthalpies of these processes are: −3.05 ± 0.02, −1.09 ± 0.01, and −9.88 ± 0.03 kJ mol⁻¹ for Pb(II), Cd(II), and Hg(II), respectively. The standard molar Gibbs free energies are in agreement with the spontaneity of the proposed reactions between cation and basic center.     

Fluorescent aluminum chelate complexes as modified precursors for nano-structured alumina

A series of new mononuclear heteroleptic derivatives of aluminum(III), {[(CH₃COCHCOCH₃)AlL] (1 and 4)}, {[(C₆H₅COCHCOC₆H₅)AlL] (2, 5, and 7)}, and {[(C₉H₆NO)AlL] (3 and 6)}, have been synthesized by reacting Al(OPrⁱ)₃ with tridentate Schiff base H₂L^x (H₂L¹ = C₁₃H₁₀BrNO₂; H₂L² = C₁₄H₁₃NO₃; H₂L³ = C₁₇H₁₃NO₂) and β-diketone/8-hydroxyquinoline (β-diketone = acetylacetone/dibenzoylmethane) in 1?:?1?:?1 stoichiometry using anhydrous benzene and ethanol. All the complexes were characterized by elemental analysis, FTIR, and NMR (¹H and ¹³C) spectral studies. Molecular structures obtained from single-crystal XRD of aqua 1 (1a) and DMSO coordinated 2 (2a) authenticate their existence. Further, nanostructured α-alumina was synthesized from 1 by well-established sol–gel method and was characterized by powder XRD, TEM, and EDX analyses.     

Development and Validation Method for Silica Determination by Spectrophotometry in Some Herbs and Pharmaceutical Formulations

ABSTRACT

A spectrophotometric method for determination of silica in herbs and herbal pharmaceutical products has been developed and validated. The method showed excellent accuracy and precision with S.D. 1.67 and RSD 1.72%, 2.75%, respectively. The established linearity range was 0.05–0.5 μg/mL(r² > 0.99974). The recovery of silica from spiked placebo was > 95% over the linear range. The method has been successfully used in the analysis of silica in raw material and herbal pharmaceutical formulations. This validated method proved to be rapid and less costly.     

Comparative study of conventional and multivariate methods for aluminum determination in soft drinks by graphite furnace atomic absorption spectrometry

In the present study, conventional and multivariate methods were used to optimize conditions for direct determination of aluminum in soft drinks by electrothermal atomic absorption spectrometry. For the conventional method, the optimized experimental parameters were: pyrolysis and atomization temperatures and chemical modifier. A multivariate study was performed using factorial design and the optimized parameters were the same employed in the univariate method including pyrolysis time. For the conventional method, the optimal conditions obtained were: pyrolysis temperature of 1600 °C, atomization temperature of 2700 °C, and Zr as permanent modifier. For the factorial design in the multivariate optimization, the Pareto´s chart showed that the atomization temperature, the modifier, and the pyrolysis temperature presented a significant effect on the integrated absorbance and the interaction between pyrolysis temperature and pyrolysis time also had a significant effect on the signal. Better results were obtained using Zr as modifier. The surface response indicates that the lowest pyrolysis (1100 °C) and atomization temperatures (2350 °C) provide higher absorbance for aluminum in soft drinks. Characteristic mass of 23.4 and 19.4 pg and LOD of 17.9 and 11.3 μg L^− 1 was obtained to conventional and multivariate methods, respectively. The calibration was accomplished with standard addition in a range of 60–200 μg L^− 1 for conventional method and of 38–200 μg L^− 1for multivariate method with R higher than 0.99 for both conditions. Recoveries in both studies were nearly 100% with adequate precision for GFAAS analysis. For the Al concentrations level found in soft drinks, both experimental conditions are adequate as good results were obtained in recovery studies. The Al concentrations in different soft drinks range from 147.9 to 599.5 μg L⁻¹. Higher concentrations were found in soft drinks sold in Al cans than in PET bottles, indicating that contamination can occur.     

Fluorimetric determination of magnesium and aluminum via complexation with oxine in high-performance liquid chromatography

Aluminum and magnesium were determined by fluorimetric detection via pre-column and/or in-column derivatization with 8-hydroxyquinoline (oxine) in high-performance liquid chromatography. The oxine complex of aluminum was selectively detected when the eluent contained no oxine, whereas the aluminum and magnesium complexes could be simultaneously detected when the eluent contained oxine. The sensitivity was improved by using eluents containing oxine by a factor of 7.1 for aluminum, and the detection limits at S/N=3 were 18 and 16 ng/ml for magnesium and aluminum, respectively. The present system was applied to the determination of magnesium and aluminum in various water samples.     

Silica spheres coated with C18‐modified gold nanoparticles for capillary LC and pressurized CEC separations

Nonporous monodispersed silica spheres of 1.3 μm were coated with gold nanoparticles (AuNPs) and subsequently coated with n‐octadecanethiol. By transmission electron microscopy analysis, the average diameter of the AuNPs on the silica spheres was determined to be 12 nm. The chromatographic and electrochromatographic properties of self‐assembled n‐octadecanethiol AuNP‐coated silica microspheres (C18‐AuNPs‐SiO₂) were investigated using a group of nonpolar PAHs. The stationary phase appears to display a characteristic reversed‐phase behavior. Higher separation efficiency and shorter separation times were obtained using pressurized CEC (pCEC) compared with capillary LC (CLC). A maximum column efficiency of about 2.5×10⁵ plates per meter and less than 18 min separation time for benzene were obtained in pCEC while only 66 507 plates per meter and an analysis time of nearly 100 min were observed in CLC mode. A chemical stability test of the C18‐AuNPs‐SiO₂ stationary phase under extremely high and low pH conditions demonstrated that it is stable at pH 12 and 1 for at least 60 h. The results confirm that C18‐AuNPs‐SiO₂ possesses a high rigidity to withstand high packing pressures and can be used as a good stationary phase for CLC and pCEC.     

双波长分光光度法同时测定灌木饲料中的铁和铝

利用铁、铝与邻苯二酚紫（PCV）形成的络合物的最大吸收波长相差30nm的光谱性质，建立了同时测定铁和铝的双波长分光光度法，并对络合物的形成条件及相互干扰情况进行研究，方法用于灌木饲料样品中铁和铝测定。