硅酸盐对Ferrihydrite相转化为α-Fe2O3微粒形貌的调控作用

以Ferrihydrite(又称水合氧化铁hydrous iron oxide)为反应前驱物, Fe(II)为催化剂, 在微量Na₂SiO₃存在下, 控制pH＝6～9范围内合成出了亚微米级纺锤形和准立方形α-Fe₂O₃微粒. 研究了初始pH, Na₂SiO₃浓度, Ferrihydrite老化方式对相转化时间和产物形貌的影响, 利用XRD, SEM等手段对产物进行了表征. 结果表明, Na₂SiO₃对Ferriihydrite催化相转化有一定的抑制作用, 是影响其相转化过程及产物形貌的关键. 在弱碱性条件下, [Si]/[Fe^3＋]为0.01时可直接获得纺锤形(轴比≥2)或准立方形(300～400 nm) α-Fe₂O₃粒子, 并对形成机理进行了初步讨论.     

Effects of doping on the thermal stability of spindle-shaped γ-Fe2O3 particles

Spindle-shaped α-FeOOH particles were synthesized using the chemical coprecipitation method in Fe(CO₃)_x(OH)_2(?x) suspensions system by adding metallic ions. The spindle-shaped γ-Fe₂O₃ particles were obtained by dehydration of α-FeOOH, and subsequent reduction and oxidation. Its thermal stability was investigated by differential thermal analysis (DTA). It was found that the transition temperature of γ-Fe₂O₃→α-Fe₂O₃ of samples doped with metallic ions is higher than that of the pure γ-Fe₂O₃ and increasing with increase of the size of the metallic ions, and γ-Fe₂O₃ by doping with two or more different metallic ions together has even higher thermal stability. The origin of the improved thermal stability was discussed. Additionally, the magnetic properties of γ-Fe₂O₃ were measured.     

A highly stable nano γ-Fe2O3/gold-film modified electrode for electrochemically sensitive sensing to hydrazine

The magnetic γ-Fe₂O₃ material was prepared in a new way and characterized by transmission electron microscopy and X-ray diffraction. It was modified on a glass carbon electrode (GCE) coated with gold film to form nano γ-Fe₂O₃/Au/GCE. The electrooxidation of hydrazine has been deeply explored with the resulting electrode in 0.1 M phosphate-buffered saline (pH 7.0). The affecting factors containing pH of supporting electrolyte, scan rate, deposition time, amount of γ-Fe₂O₃, and possible interferences were investigated, and the oxidation mechanisms of hydrazine on the γ-Fe₂O₃/Au/GCE were also explored. The amperometric response to hydrazine is linear in the range of 0.02 to 11 μM, and the detection limit is 6 nM at a SNR of 3. The prepared sensor exhibited good sensitivity, stability, and lower detection limit for the determination of hydrazine injection.     

Magnetic hollow poly(N-isopropylacrylamide-co-N,N′-methylenebisacrylamide-co-glycidyl acrylate) particles prepared by inverse emulsion polymerization

To prepare functionalized magnetic polymer particles that are thermally responsive, inverse emulsion copolymerization of N-isopropylacrylamide, N,N′-methylenebisacrylamide and glycidyl acrylate (GA) was investigated in paraffin oil in the presence of γ-Fe₂O₃ nanoparticles dispersed in a water/glycerol mixture. The resulting polymer particles were characterized regarding the morphology, size, polydispersity, iron content, and the temperature-dependent phase transition using optical microscopy, transmission electron microscopy, scanning electron microscopy, atomic absorption spectroscopy, and differential scanning calorimetry. Magnetic properties were examined using hysteresis loop measurements and by analyzing the magnetic susceptibility with respect to temperature. We have also investigated the influence of the concentration of γ-Fe₂O₃ and GA in monomers on properties of the particles (morphology, size, and presence of oxirane groups). The particles possessed a hollow structure as a result of phase separation between water/glycerol hydrophilic solvents in the polymerization feed and the forming polymer. Depending on the concentration of γ-Fe₂O₃ in the monomer phase, the magnetic hollow particles contained 5–24 wt% iron. In water, the particles gradually collapsed when the temperature was raised to 40 °C because the elevated temperature weakened hydration and the PNIPAAm chains gradually became more hydrophobic.     

Highly transparent silica monoliths embedded with high concentration oxide nanoparticles

Silica monoliths embedded with high concentration of γ-Fe₂O₃ or TiO₂ nanoparticles were prepared by a sol–gel procedure designed according to the inherent properties of oxide colloids. In the first step, highly dispersible oxide nanoparticles were produced using an in situ modification sol–gel strategy. Then, these particles were re-dispersed in silicon alkoxide-containing solution to form a stable colloidal solution. The hydrolysis and condensation reactions of alkoxide were catalyzed by an organic base (morpholine). Due to the large molecule size of morpholine, the electric double layer on the surface of colloidal particles was not compressed by the ionized morpholine molecules. The colloidal solution thus remained stable during the gelation process. Through this procedure, oxide nanoparticles could be immobilized homogeneously in the pores of a silica matrix, forming highly transparent and crack-free monoliths.     

Polypyrrole/γ-Fe2O3 magnetic nanocomposites synthesized in supercritical fluid

Polypyrrole/iron oxide (PPy/γ-Fe₂O₃) nanocomposites were synthesized by in situ oxidative polymerization of pyrrole in the presence of surface modified γ-Fe₂O₃ in supercritical carbon dioxide (scCO₂). The structural properties of nanocomposite particles thus obtained were characterized by FT-IR, thermal analysis (TGA), X-ray diffraction (XRD), and transmission electron microscopy (TEM). It was found that ca. 50 nm γ-Fe₂O₃ nanoparticles were well dispersed in PPy powder in TEM pictures. X-ray photoelectron spectroscopy (XPS) analysis also support that all γ-Fe₂O₃ nanoparticles are encapsulated by PPy. Magnetic property of the nanocomposites was measured by SQUID, which indicated that the nanocomposites are superparamagnetic. The effects of different loadings of γ-Fe2O3 on the polymerization were also investigated.     

纺锤形α-Fe2O3粒子的溶液催化合成

以Fe₂(SO₄)₃为原料, 在pH为4～7、微量催化剂Fe^2＋离子及晶体助长剂NaH₂PO₄存在下, 沸腾回流, 短时间可直接成长出纺锤形α-Fe₂O₃超细粒子. 与强迫水解法和水热法比较, 该方法具有操作简单、反应物浓度高、反应条件温和及重现性好等优点. 同时研究了各种因素对产物的轴比及相转化速率的影响.     

Experimental Study on Viscosity of Colloidal Silica in Aqueous Electrolytic Solutions

The relative viscosity of colloidal silica dispersion in aqueous electrolytic solutions as the function of volume fraction of dry particles in the solutions has been experimentally determined in this work, in order to study the effects of pH and electrolytes (Na₂SO₄ and AlCl₃) on the hydration of the silica surfaces in the solutions. The results have shown that the maximum relative viscosity of the silica dispersion and the strongest hydration of the silica in aqueous solutions appeared at neutral pH, while the stronger the acidity and the alkalinity of the aqueous solution, the weaker the hydration. In the presence of the electrolytes (Na₂SO₄ and AlCl₃), the relative viscosity of the silica dispersion reduced and the hydration of the silica in aqueous solutions became weak. The higher the concentration of the electrolytes, the weaker the hydration, indicating that the destabilization of the colloidal silica dispersion in aqueous solutions might be realized through adding the high-valence electrolytes to weaken the hydration of the particle surfaces (hydration forces between the particles). Also, it has been shown that the negative zeta potentials of the colloidal silica in aqueous solutions greatly reduced in the presence of the electrolytes. Therefore, the high-valence electrolytes (Na₂SO₄ and AlCl₃) as the coagulant of colloidal silica in aqueous solutions might be originated from that the presence of the electrolytes simultaneously reduces the electrical double layer repulsive force and the hydration repulsive forces between the particles in aqueous solutions.     

Influence of crystallite size on the oxidation kinetics of magnetite

The oxidation of magnetite yields the lacunar phase γ-Fe₂O₃, for sizes less than 5000 Å and the rhombohedral phase, α-Fe₂O₃, for sizes above 10 000 Å. For intermediate sizes, oxidation kinetics and X-ray analysis have confirmed that the γ-Fe₂O₃ phase forms at the beginning of the reaction, followed by phase α-Fe₂O₃ forming from γ-Fe₂O₃ and then directly from the still-unoxidized magnetite. Influence of size could be accounted for in terms of structure and stresses at the crystal lattice level.     

Microstructural behavior of γ-Fe2O3 formation in reactions between layered iron oxychloride and sodium n-pentoxide

Microstructural behavior of γ-Fe₂O₃ formation in reactions between FeOCl and n-C₅H₁₁ONa was thoroughly investigated. Reactions were conducted at 50–150 °C for 3 days in an autoclave using n-C₅H₁₁OH as a solvent. X-ray diffraction (XRD) patterns and infrared (IR) spectra of the products suggested the crystallization of γ-Fe₂O₃ besides the formation of n-pentoxy derivatives of FeOCl. Scanning electron microscopic observation revealed that the FeOCl particles were divided into thin sheets upon reaction. The selected area electron diffractions (SAED) of the sheets revealed the crystallization of γ-Fe₂O₃ at even 80 °C, apparently due to the fact that the γ-Fe₂O₃ crystallization process involved a collapse from n-pentoxide derivatives with large separations between two adjacent layers. In the reaction at 150 °C, a part of the sheets was converted into highly oriented polycrystalline γ-Fe₂O₃ in improved crystallinity, and the SAED clearly showed that an oriented transformation with a crystallographic relationship of FeOCl (010)//γ-Fe₂O₃ (110) occurred. The reaction at 120 °C, on the contrary, led to the formation of randomly oriented γ-Fe₂O₃ crystallites within a sheet.     

Synthesis and ferromagnetic properties of composites of a water-soluble polyaniline copolymer containing iron oxide

Composites of water-soluble conducting polyaniline copolymers, poly(aniline-co-aminobenzenesulfonic acid) (PAOABSA), containing γ-Fe₂O₃magnetic particles with nanometer size, were synthesized by a chemical method. The ferromagnetic properties of the resulting PAOABSA composites were measured as a function of the pH value of the reaction solution, the sulfonated degree of the copolymer, and the concentration of FeCl₂. The structure of the composites was characterized by means of elemental analysis, FTIR, XPS, and X-ray diffraction. It was found that increasing the pH value of the reaction solution and the concentration of FeCl₂ is favorable for an enhancement of the saturated magnetization. As high as 33.2 emu/g of saturated magnetization for the PAOABSA composites was observed. No hysteresis loop (i.e. H_c = 0) was observed, which is independent of the preparation conditions. Structure characterizations show that iron oxide existing in the composite is mainly γ- Fe₂O₃, which is responsible for the ferromagnetic properties of the PAOABSA composites, whereas γ- Fe₂O₃ magnetic particles nanometer in size (∼85 nm) may be attributed to a lower coercive force (i.e. H_c = 0) of the composites. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 2749–2755, 1998     

α-Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> thin films by liquid phase deposition: low-cost option for supercapacitor

In the present study, iron oxide (α-Fe₂O₃) thin films with good adhesion on stainless steel substrates are deposited by liquid phase deposition (LPD) technique, which is additive and binder-free. Iron oxyhydroxide (FeOOH) thin films are formed by means of a ligand-exchange equilibrium reaction of metal-fluoro complex ions and an F^?ions consuming reaction by using boric acid (H₃BO₃) as a scavenging agent. These films are annealed at 500 °C to get α-Fe₂O₃ thin films. The transformation from hydrophobic to hydrophilic nature of the films is observed due to annealing. The films are characterized by different techniques. The α-Fe₂O₃ film is checked for electrochemical supercapacitive performance in Na₂SO₃ solutions of various concentrations. Specific capacitance is calculated from cyclic voltammetry at numerous scan rates (5–200) mV s^?1. The highest obtained value of specific capacitance is 582 F g^?1 at 5 mV s^?1 for 0.5 M Na₂SO₃ electrolyte. The maximum values of specific power and specific energy are 6.9 and 53.4 Wh kg^?1 from the charge-discharge curve at the current density 2 mA cm^?2 in 0.5 M Na₂SO₃ electrolyte.     

Thermal and Magnetic Properties of Maghemite γ-Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> Synthesized by a Precursor Method

Low-dimension ferromagnetic maghemite γ-Fe₂O₃ was synthesized through a precursor route, using basic iron formate Fe(OH)(HCOO)₂ as a precursor. Conditions of formation of γ-Fe₂O₃ and the temperature range of its existence on heating in air were determined. The saturation magnetization of γ-Fe₂O₃ produced through heating the precursor at 350°C 57.5 (T = 4.2 K) and 43.8 emu/g (T = 300 K).     

Synthesis and electromagnetic properties of polyaniline-coated silica/maghemite nanoparticles

Polyaniline coated silica/maghemite nanoparticles (PANI/SiO₂/γ-Fe₂O₃ composites) were synthesized by the combination of a sol-gel process and an in-situ polymerization method, in which ferrous and ferric salts as well as tetraethyl orthosilica (TEOS) acted as the precursor for γ-Fe₂O₃ and silica, respectively. As a result, the SiO₂/γ-Fe₂O₃ particle showed a core-shell structure, with γ-Fe₂O₃ as the magnetic core and silica as the shell of the particle. The shell thickness can be controlled by changing the TEOS concentration. The PANI/SiO₂/γ-Fe₂O₃ composites revealed a multilayer core-shell structure, where PANI is the outer shell of the composite. The doping level and the conductivity of PANI/SiO₂/γ-Fe₂O₃ composites decreased with increasing the TEOS content due to the presence of the less coated PANI on the SiO₂/γ-Fe₂O₃ core at higher TEOS content. For a SQUID analysis at room temperature, all γ-Fe₂O₃ containing composites showed a typical superparamagnetic behavior. The saturation magnetization of SiO₂/γ-Fe₂O₃ nanoparticles decreased with increasing the TEOS content due to the increase in silica shell thickness, while the saturation magnetization of PANI/SiO₂/γ-Fe₂O₃ composites also decreased with increasing the TEOS content, which is attributed to the lower conductivity of PANI in the composites at higher TEOS content.     

Colloidal catalysts based on iron(III) oxides. 1. Decomposition of hydrogen peroxide

The catalytic activity of a colloidal catalyst based on iron(III) oxides in decomposition of H₂O₂ is studied. The catalyst is obtained by hydrolysis followed by peptization of FeCl₃ · 6H₂O salt in water in the presence of 1% ethanol. The structure, composition, and size of colloidal particles of the catalyst are studied by the methods of Mössbauer spectroscopy, X-ray fluorescence, X-ray diffraction, and transmission electron microscopy. The obtained catalyst is based on α-Fe₂O₃ crystals with an admixture of other crystalline structures of iron oxides and carbon-containing compounds. The activity of the catalyst with respect to H₂O₂ decomposition undergoes nonlinear and nonmonotonic variations and its particle size enlarges beginning from 1 to 3 nm with increasing initial concentration of FeCl₃ · 6H₂O. The catalyst obtained under optimal conditions exhibits high activity corresponding to the most efficient agents of H₂O₂ decomposition.     

Improve the catalytic activity of α-Fe2O3 particles in decomposition of ammonium perchlorate by coating amorphous carbon on their surface

Sphere- and pod-like α-Fe₂O₃ particles have been selectively synthesized using NH₃·H₂O and NaOH solution to adjust the pH value of the designed synthetic system, respectively. The sphere-like α-Fe₂O₃ particles with diameter about 25 nm on average were encapsulated into carbon shells to fabricate a novel core-shell composite (α-Fe₂O₃@C) through the coating experiments. The catalytic performance of the products on the thermal decomposition of ammonium perchlorate (AP) was investigated by thermal gravimetric analyzer (TG) and differential thermal analysis (DTA). The thermal decomposition temperatures of AP in the presence of pod-like α-Fe₂O₃, sphere-like α-Fe₂O₃ and α-Fe₂O₃@C are reduced by 72, 81 and 109 °C, respectively, which show that α-Fe₂O₃@C core-shell composites have higher catalytic activity than that of α-Fe₂O₃.     

Chemical modification of iron oxide surface with organosilicon and organophosphorous compounds

The feasibility of modifying iron oxides (α-Fe₂O₃, γ-Fe₂O₃, and an oxide covering the surface of carbonyl iron) with various organosilicon and organophosphorous compounds has been studied. It has been shown that the surfaces of these oxides can be successfully modified with ethoxysilanes and diethyl ester of butylphosphonic acid. Resultant grafted layers have being found to be rather hydrolytically and thermally stable. The effect of the modification on the corrosion and erosion stability of carbonyl iron has been investigated. It has been demonstrated that the modifying layers can efficiently protect carbonyl iron particles from corrosion.     

Facile synthesis of Fe3O4 nanoparticles by reduction phase transformation from γ-Fe2O3 nanoparticles in organic solvent

A phase transformation induced by the reduction of as-synthesized γ-maghemite (γ-Fe₂O₃) nanoparticles was performed in solution by exploiting the reservoir of reduction gas (CO) generated from the incomplete combustion reaction of organic substances in the reactor. Results from X-ray diffraction, color indicator, and magnetic analysis using a SQUID strongly support this phase transformation. Based on this route, monodisperse magnetite (Fe₃O₄) nanoparticles were simply produced in the range from 260 to 300 °C. Almost all aspects of the original γ-Fe₂O₃ nanoparticles, such as shape, size, and monodispersity, were maintained in the produced Fe₃O₄ nanoparticles.     

Synthesis of mesoporous maghemite with high surface area and its adsorptive properties

Mesoporous maghemite (γ-Fe₂O₃) with high surface area was prepared by the thermal decomposition of Fe–urea complex ([Fe(CON₂H₄)₆](NO₃)₃) with the aid of cetyltrimethyl ammonium bromide (CTAB), and its adsorption ability for the removal of fluoride was investigated. X-ray diffraction (XRD), nitrogen adsorption–desorption measurements, transmission electron micrograph (TEM) observations, and magnetic measurements show that the γ-Fe₂O₃ has a mesoporous structure and its crystallite size, specific surface area, and magnetic properties can be controlled by varying the content of CTAB in [Fe(CON₂H₄)₆](NO₃)₃. The maximum adsorption capacity of the mesoporous γ-Fe₂O₃ for fluoride is estimated to be 7.9 mg/g, which suggests that the mesoporous γ-Fe₂O₃ is an excellent adsorbent for fluoride.     

Kinetics and mechanism of the dehydration of γ-FeOOH

The dehydration of γ-FeOOH to γ-Fe₂O₃ in vacuo has been investigated by thermoanalysis. Results have been checked by electron microscopy and diffraction and by x-ray diffraction. Authors find that formal kinetics are not conclusive. Electron micrographs, however, show directly that random nucleation occurs, producing perfectly oriented but disordered γ-Fe₂O₃ crystals of about 70 Å size. The results can be accomodated with an atomistic model of lattice collapse.