G-quadruplex-hemin DNAzyme-amplified colorimetric detection of Ag ion

A G-quadruplex-hemin DNAzyme-amplified Ag⁺-sensing method was developed based on the ability of Ag⁺ to stabilize C-C mismatches by forming C-Ag⁺-C base pairs. In this method, only one unlabelled oligonucleotide strand was used. In the absence of Ag⁺, the oligonucleotide strand formed an intramolecular duplex. The G-rich sequence in the oligonucleotide was partially caged in this duplex structure and cannot fold into the G-quadruplex structure. The addition of Ag⁺ promoted the formation of another intramolecular duplex in which C-C mismatches were stabilized by C-Ag⁺-C base pairs, leading to the release of the G-rich sequence which can fold into a G-quadruplex capable to bind hemin to form a catalytically active G-quadruplex-hemin DNAzyme. As a result, a UV-vis absorbance increasing was observed in the H₂O₂-ABTS (2,2′-azinobis(3-ethylbenzothiozoline)-6-sulfonic acid) reaction system. This “turn-on” process allowed the detection of aqueous Ag⁺ at concentrations as low as 6.3 nM using a simple colorimetric technique, showing a high selectivity over a range of other metal ions.     

A pseudo triple-enzyme electrochemical aptasensor based on the amplification of Pt–Pd nanowires and hemin/G-quadruplex

Our present work aimed at developing a pseudo triple-enzyme cascade electrocatalytic electrochemical aptasensor for determination of thrombin with the amplification of alcohol dehydrogenase (ADH)-Pt–Pd nanowires bionanocomposite and hemin/G-quadruplex structure that simultaneously acted as NADH oxidase and HRP-mimicking DNAzyme. With the addition of ethanol to the electrolyte, the ADH immobilized on the Pt–Pd nanowires catalyzed ethanol to acetaldehyde accompanied by NAD⁺ being converted to NADH. Then the hemin/G-quadruplex firstly served as NADH oxidase, converting the produced NADH to NAD⁺ with the concomitant local formation of high concentration of H₂O₂. Subsequently, the hemin/G-quadruplex acted as HRP-mimicking DNAzyme, bioelectrocatalyzing the produced H₂O₂. At the same time, the Pt–Pd nanowires employed in our strategy not only provided a large surface area for immobilizing thrombin binding aptamer (TBA) and ADH, but also served as HRP-mimicking DNAzyme which rapidly bioelectrocatalyzed the reduction of the produced H₂O₂. Thus, such a pseudo triple-enzyme cascade electrochemical aptasensor could greatly promote the electron transfer of hemin and resulted in the dramatic enhancement of electrochemical signal. As a result, a wide dynamic concentration linear range from 0.2 pM to 20 nM with a low detection limit of 0.067 pM for thrombin (TB) determination was obtained. The excellent performance indicated that our strategy was a promising way for ultrasensitive assays in electrochemical aptasensors.     

Electrochemical detection of nicotinamide adenine dinucleotide based on molecular beacon-like DNA and E. coli DNA ligase

An electrochemical method for nicotinamide adenine dinucleotide (NAD⁺) detection with high sensitivity and selectivity has been developed by using molecular beacon (MB)-like DNA and Escherichia coli DNA ligase. In this method, MB-like DNA labeled with 5′-SH and 3′-biotin was self-assembled onto a gold electrode in its duplex form by means of facile gold-thiol chemistry, which resulted in blockage of electronic transmission. It was eT OFF state. In the presence of NAD⁺, E. coli DNA ligase was activated, and the two nucleotide fragments which were complementary to the loop of the MB-like DNA could be ligated by the NAD⁺-dependent E. coli DNA ligase. Hybridization of the ligated DNA with the MB-like DNA induced a large conformational change in this surface-confined DNA structure, which in turn pushed the biotin away from the electrode surface and made the electrons exchange freely with the electrode. Then the generated electrochemical signals can be measured by differential pulse voltammetry (DPV). Under optimized conditions, a linear response to logarithmic concentration of NAD⁺ range from 3 nM to 5 μM and a detection limit of 1.8 nM were obtained. Furthermore, the proposed strategy had sufficient selectivity to discriminate NAD⁺ from its analogues.     

Amplified electrochemiluminescent aptasensor using mimicking bi-enzyme nanocomplexes as signal enhancement

In this work, a sandwich-type electrochemiluminescence (ECL) aptasensor for ultrasensitive detection of thrombin (TB) was designed based on mimicking bi-enzyme cascade catalysis to in situ generate coreactant of dissolved oxygen (O₂) for signal amplification. We utilized hollow Au nanoparticles (HAuNPs) as carriers to immobilize glucose oxidase nanoparticles (GOxNPs) and Pt nanoparticles (PtNPs) by electrostatic adsorption. Then, the detection aptamer of thrombin (TBA 2) was immobilized on the PtNPs/GOxNPs/HAuNPs nanocomplexes. Finally, hemin was intercalated into the TBA 2 to obtain the hemin/G-quadruplex structure. The hemin/G-quadruplex was an interesting DNAzyme that commonly mimiced horseradish peroxidase (HRP). Herein, GOxNPs, hemin/G-quadruplex and PtNPs could form mimicking bi-enzyme cascade catalysis system to in situ generate dissolved O₂ as coreactant in peroxydisulfate solution when the testing buffer contained proper amounts of glucose. This method had successfully overcome the disadvantage of difficulty to label the dissolved O₂ and realized the ECL signal amplification. The experiment proved that the aptasensor had good linear relationship on low concentration of TB. The linear range was 1 × 10⁻⁶–10 nM, with a detection limit of 0.3 fM.     

Dual fluorescence/contactless conductivity detection for microfluidic chip

A new dual detection system for microchip is reported. Both fluorescence detector (FD) and contactless conductivity detector (CCD) were combined together and integrated on a microfluidic chip. They shared a common detection position and responded simultaneously. A blue light-emitting diode was used as excitation source and a small planar photodiode was used to collect the emitted fluorescence in fluorescence detection, which made the device more compact and portable. The coupling of the fluorescence and contactless conductivity modes at the same position of a single separation channel enhanced the detection characterization of sample and offered simultaneous detection information of both fluorescent and charged specimen. The detection conditions of the system were optimized. K⁺, Na⁺, fluorescein sodium, fluorescein isothiocyanate (FITC) and FITC-labeled amino acids were used to evaluate the performance of the dual detection system. The limits of detection (LOD) of FD for fluorescein Na⁺, FITC, FITC-labeled arginine (Arg), glycine (Gly) and phenylalanine (Phe) were 0.02 μmol L⁻¹, 0.05 μmol L⁻¹, 0.16 μmol L⁻¹, 0.15 μmol L⁻¹, 0.12 μmol L⁻¹ respectively, and the limits of detection (LOD) of CCD achieved 0.58 μmol L⁻¹ and 0.39 μmol L⁻¹ for K⁺ and Na⁺ respectively.     

A dual-amplification aptasensor for highly sensitive detection of thrombin based on the functionalized graphene-Pd nanoparticles composites and the hemin/G-quadruplex

In this work, an advanced sandwich-type electrochemical aptasensor for thrombin was proposed by integrating hemin/G-quadruplex with functionalized graphene-Pd nanoparticles composites (PdNPs-RGs). The hemin/G-quadruplex formed by intercalating hemin into thrombin binding aptamer (TBA), firstly acted as a NADH oxidase, assisting the oxidation of NADH to NAD⁺ accompanying with the generation of H₂O₂ in the presence of dissolved O₂. Subsequently, the hemin/G-quadruplex acted as HRP-mimicking DNAzyme that rapidly bioelectrocatalyze the reduction of the produced H₂O₂. At the same time, the Pd nanoparticles supported on p-iodoaniline functionalized graphene were also adopted to catalyze the reduction of H₂O₂. Thus, with the dual catalysis, a dramatically amplified electrochemical signal could be obtained. Besides, the avidin–biotin system for binding aptamer sequences on electrodes not only improved the sensitivity of thrombin analysis but also obtained an acceptable repeatability of the aptasensor. With several factors mentioned above, a wide linear ranged from 0.1 pM to 50 nM was acquired with a relatively low detection limit of 0.03 pM (defined as S/N = 3). These excellent performances provided our approach a promising way for ultrasensitive assay in electrochemical aptasensors.     

Aptamer-based biosensor for label-free detection of ethanolamine by electrochemical impedance spectroscopy

A label-free sensing assay for ethanolamine (EA) detection based on G-quadruplex-EA binding interaction is presented by using G-rich aptamer DNA (Ap-DNA) and electrochemical impedance spectroscopy (EIS). The presence of K⁺ induces the Ap-DNA to form a K⁺-stabilized G-quadruplex structure which provides binding sites for EA. The sensing mechanism was further confirmed by circular dichroism (CD) spectroscopy and EIS measurement. As a result, the charge transfer resistance (R_CT) is strongly increased as demonstrated by using the ferro/ferricyanide ([Fe(CN)₆]^3−/4−) as a redox probe. Under the optimized conditions, a linear relationship between ΔR_CT and EA concentration was obtained over the range of 0.16 nM and 16 nM EA, with a detection limit of 0.08 nM. Interference by other selected chemicals with similar structure was negligible. Analytical results of EA spiked into tap water and serum by the sensor suggested the assay could be successfully applied to real sample analysis. With the advantages of high sensitivity, selectivity and simple sensor construction, this method is potentially suitable for the on-site monitoring of EA contamination.     

Highly sensitive determination of hydroxylamine using fused gold nanoparticles immobilized on sol-gel film modified gold electrode

We are reporting the highly sensitive determination of hydroxylamine (HA) using 2-mercapto-4-methyl-5-thiazoleacetic acid (TAA) capped fused spherical gold nanoparticles (AuNPs) modified Au electrode. The fused TAA-AuNPs were immobilized on (3-mercaptopropyl)-trimethoxysilane (MPTS) sol-gel film, which was pre-assembled on Au electrode. The immobilization of fused TAA-AuNPs on MPTS sol-gel film was confirmed by UV-vis absorption spectroscopy and atomic force microscopy (AFM). The AFM image showed that the AuNPs retained the fused spherical morphology after immobilized on sol-gel film. The fused TAA-AuNPs on MPTS modified Au electrode were used for the determination of HA in phosphate buffer (PB) solution (pH = 7.2). When compared to bare Au electrode, the fused AuNPs modified electrode not only shifted the oxidation potential of HA towards less positive potential but also enhanced its oxidation peak current. Further, the oxidation of HA was highly stable at fused AuNPs modified electrode. Using amperometric method, determination of 17.5 nM HA was achieved for the first time. Further, the current response of HA increases linearly while increasing its concentration from 17.5 nM to 22 mM and a detection limit was found to be 0.39 nM (S/N = 3). The present modified electrode was also successfully used for the determination of 17.5 nM HA in the presence of 200-fold excess of common interferents such as urea, NO₂⁻, NH₄⁺, oxalate, Mn²⁺, Na⁺, K⁺, Mg²⁺, Ca²⁺, Ba²⁺ and Cu²⁺. The practical application of the present modified electrode was demonstrated by measuring the concentration of HA in ground water samples.     

Fluorescence energy transfer probes based on the guanine quadruplex formation for the fluorometric detection of potassium ion

Dual-labeled oligonucleotide derivative, FAT-0, carrying 6-carboxyfluorescein (FAM) and 6-carboxy-tetramethylrhodamine (TAMRA) labels at 5′- and 3′-termini of thrombin-binding aptamer (TBA) sequence 5′-GGTTGGTGTGGTTGG-3′ and its derivatives, FAT-n (n = 3, 5, and 7) were designed and synthesized. FAT-n derivatives contained a T_mA spacer (m = 2, 4, and 6, respectively) at 5′-end of TBA sequence. The probes were developed to estimate the spacer effect on FRET efficiency and to identify the best probe for sensing of K⁺. Circular dichroism (CD), UV-vis absorption, and fluorescence studies revealed that all FAT-n probes could form the intramolecular tetraplex structures after binding K⁺. Association constants of particular K⁺/FAT-n complexes were determined using different experimental approaches. Suitability of particular probes for sensitive monitoring of K⁺ in intra- and extracellular conditions was examined and discussed. Calibration graphs of fluorescence ratio were linear in the K⁺ concentration range of 2-10 mM for extracellular conditions showing sensitivity of 1.2% mM⁻¹ K⁺ and for intracellular conditions in the range of 100-200 mM with sensitivity of 0.49% mM⁻¹ K⁺.     

Spectrophotometric determination of cyclotrimethylenetrinitramine (RDX) in explosive mixtures and residues with the Berthelot reaction

On-site colorimetric methods are a valuable, cost-effective tool to assess the nature and extent of contamination in remediated sites and to enable on-site screening for police criminology laboratories. The existing colorimetric method for cyclotrimethylenetrinitramine (RDX) based on a Griess reaction suffers from the non-quantitative reduction to nitrite and from the unstable character of HNO₂ in acidic medium. Thus we propose a novel spectrophotometric RDX assay in explosive mixtures and residues, based on (Zn + HCl) reduction of RDX in a microwave oven, followed by neutralization of the reduction products to ammonia and low molecular-weight amines, and Berthelot reaction of these amine-compounds with phenol and hypochlorite in alkaline medium to give an intensely blue indophenol dye absorbing at 631 nm. The molar absorptivity and limit of detection (LOD) for RDX were (1.08 ± 0.04) × 10⁴ L mol⁻¹ cm⁻¹ and 0.18 mg L⁻¹, respectively. Application of the method to synthetic mixture solutions of RDX and trinitrotoluene (TNT) at varying proportions showed that there was minimal interference from TNT (which could be compensated for by dicyclohexylamine colorimetry), since the Berthelot reaction was essentially non-responsive to m-substituted anilines derived from TNT upon (Zn + HCl) reduction. The proposed method was successfully applied to military-purpose explosive mixtures of (RDX + inert matter) such as Comp A5, Comp C4, and Hexal P30, and to (RDX + TNT) mixtures such as Comp B. The molar absorptivity of RDX was much higher than that of either ammonium or nitrate; RDX could be effectively separated from ammonium and nitrate in soil mixtures, based on solubility differences. The Berthelot method for RDX was statistically validated using Comp B mixtures against standard HPLC equipped with a Hypersil C-18 column with (40% MeOH-60% H₂O) mobile phase, and against gas chromatography-thermal energy analysis (GC-TEA) system.     

An exonuclease-assisted amplification electrochemical aptasensor of thrombin coupling “signal on/off” strategy

In this work, a dual-signaling electrochemical aptasensor based on exonuclease-catalyzed target recycling was developed for thrombin detection. The proposed aptasensor coupled “signal-on” and “signal-off” strategies. As to the construction of the aptasensor, ferrocene (Fc) labeled thrombin binding aptamer (TBA) could perfectly hybridize with the methylene blue (MB) modified thiolated capture DNA to form double-stranded structure, hence emerged two different electrochemical signals. In the presence of thrombin, TBA could form a G-quadruplex structure with thrombin, leading to the dissociation of TBA from the duplex DNA and capture DNA formed hairpin structure. Exonuclease could selectively digest single-stranded TBA in G-quadruplex structure and released thrombin to realize target recycling. As a consequence, the electrochemical signal of MB enhanced significantly, which realized “signal on” strategy, meanwhile, the deoxidization peak current of Fc decreased distinctly, which realized “signal off” strategy. The employment of exonuclease and superposition of two signals significantly improved the sensitivity of the aptasensor. In this way, an aptasensor with high sensitivity, good stability and selectivity for quantitative detection of thrombin was constructed, which exhibited a good linear range from 5 pM to 50 nM with a detection limit of 0.9 pM (defined as S/N = 3). In addition, this design strategy could be applied to the detection of other proteins and small molecules.     

Sensitive pseudobienzyme electrocatalytic DNA biosensor for mercury(II) ion by using the autonomously assembled hemin/G-quadruplex DNAzyme nanowires for signal amplification

Herein, a novel sensitive pseudobienzyme electrocatalytic DNA biosensor was proposed for mercury ion (Hg²⁺) detection by using autonomously assembled hemin/G-quadruplex DNAzyme nanowires for signal amplification. Thiol functionalized capture DNA was firstly immobilized on a nano-Au modified glass carbon electrode (GCE). In presence of Hg²⁺, the specific coordination between Hg²⁺ and T could result in the assembly of primer DNA on the electrode, which successfully triggered the HCR to form the hemin/G-quadruplex DNAzyme nanowires with substantial redox probe thionine (Thi). In the electrolyte of PBS containing NADH, the hemin/G-quadruplex nanowires firstly acted as an NADH oxidase to assist the concomitant formation of H₂O₂ in the presence of dissolved O₂. Then, with the redox probe Thi as electron mediator, the hemin/G-quadruplex nanowires acted as an HRP-mimicking DNAzyme that quickly bioelectrocatalyzed the reduction of produced H₂O₂, which finally led to a dramatically amplified electrochemical signal. This method has demonstrated a high sensitivity of Hg²⁺ detection with the dynamic concentration range spanning from 1.0 ng L⁻¹ to 10 mg L⁻¹ Hg²⁺ and a detection limit of 0.5 ng L⁻¹ (2.5 pM) at the 3S_blank level, and it also demonstrated excellent selectivity against other interferential metal ions.     

Colorimetric detection of iron ions (III) based on the highly sensitive plasmonic response of the N-acetyl-l-cysteine-stabilized silver nanoparticles

We report here a facile colorimetric sensor based on the N-acetyl-l-cysteine (NALC)-stabilized Ag nanoparticles (NALC–Ag NPs) for detection of Fe³⁺ ions in aqueous solution. The Ag NPs with an average diameter of 6.55 ± 1.0 nm are successfully synthesized through a simple method using sodium borohydride as reducing agent and N-acetyl-l-cysteine as protecting ligand. The synthesized silver nanoparticles show a strong surface plasmon resonance (SPR) around 400 nm and the SPR intensity decreases with the increasing of Fe³⁺ concentration in aqueous solution. Based on the linear relationship between SPR intensity and concentration of Fe³⁺ ions, the as-synthesized water-soluble silver nanoparticles can be used for the sensitive and selective detection of Fe³⁺ ions in water with a linear range from 80 nM to 80 μM and a detection limit of 80 nM. On the basis of the experimental results, a new detection mechanism of oxidation–reduction reaction between Ag NPs and Fe³⁺ ions is proposed, which is different from previously reported mechanisms. Moreover, the NALC–Ag NPs could be applied to the detection of Fe³⁺ ions in real environmental water samples.     

Sequence-specific detection of nucleic acids utilizing isothermal enrichment of G-quadruplex DNAzymes

G-quadruplex DNAzymes are peroxidase-like complexes formed by nucleic acid G-quadruplexes and hemin. Various chemical sensors and biosensors have been developed, based on such DNAzymes. Here we report a novel, specific nucleic acid detection method utilizing the isothermal amplification strategy of G-quadruplex DNAzymes. In this method, an unlabeled oligonucleotide probe was used. The probing sequence of the oligonucleotide was in the form of a stem-loop structure. A G-rich sequence, containing three GGG repeats, was linked to the 5′-end of the stem-loop structure. In the presence of target, the probing sequence hybridized to the target, and a G_n (n ≥ 2) repeat was extended from its 3′-end. This G_n repeat, together with the three GGG repeats at the 5′-end, folded into a G-quadruplex, and displayed enhanced peroxidase acitivity upon hemin binding. Utilizing the dynamic binding interaction between the probe and its target, the enrichment of G-quadruplex DNAzymes was achieved. Using this method, simple, rapid and cost-effective nucleic acid detection could be achieved. This method displayed high target-length tolerance and good detection specificity; one-base mismatch could be judged easily, even by visual inspection. This method may be used as an auxiliary tool for amplified detection of specific DNA targets in some situations, in which isothermal detection is desirable.     

Comparison of adsorption equilibrium of fructose, glucose and sucrose on potassium gel-type and macroporous sodium ion-exchange resins

Adsorption equilibrium of fructose, glucose and sucrose was evaluated on sulfonated poly(styrene-co-divinylbenzene) cation-exchange resins. Two types of resins were used: potassium (K⁺) gel-type and sodium (Na⁺) macroporous resins. Influence of the cation and effect of the resin structure on adsorption were studied. The adsorption isotherms were determined by the static method in batch mode for mono-component and multi-component sugar mixtures, at 25 and 40 °C, in a range of concentrations between 5 and 250 g L⁻¹. All adsorption isotherms were fitted by a linear model in this range of concentrations. Sugars were adsorbed in both resins by the following order: fructose > glucose > sucrose. Sucrose was more adsorbed in the Na⁺ macroporous resin, glucose was identically adsorbed, and fructose was more adsorbed in the K⁺ gel-type resin. Data obtained from the adsorption of multi-component mixtures as compared to the mono-component ones showed a competitive effect on the adsorption at 25 °C, and a synergetic effect at 40 °C. The temperature increase conducted to a decrease on the adsorption capacity for mono-component sugar mixtures, and to an increase for the multi-component mixtures. Based on the selectivity results, K⁺ gel-type resin seems to be the best choice for the separation of fructose, glucose and sucrose, at 25 °C.     

Irregular-shaped platinum nanoparticles as peroxidase mimics for highly efficient colorimetric immunoassay

Enzyme-linked immunosorbent assay (ELISA) methods based on natural enzyme-labeled probes have been applied in the immunoassays, but most have some inevitable limitations (e.g. harsh preparation, purification and storage) and are unsuitable for routine use. Herein we synthesized a new class of irregular-shaped platinum nanoparticles (ISPtNP) with a mean length of 7.0 nm and a narrowing width from 2.0 to 5.0 nm along the longitudinal axes, which were utilized as peroxidase-like mimics for the development of colorimetric immunoassays. Compared with bioactive horseradish peroxidase (HRP), the synthesized ISPtNP exhibited a low K_m value (~0.12 mM) and a high K_cat value (~2.27 × 10⁴ s⁻¹) for 3,3′,5,5′-tetramethylbenzidine (TMB) with strong thermal stability and pH tolerance. The catalytic mechanism of the ISPtNP toward TMB/H₂O₂ was for the first time discussed and deliberated in this work. Based on a sandwich-type assay format, two types of colorimetric immunoassay protocols were designed and developed for the detection of rabbit IgG (RIgG, as a model) by using the synthesized ISPtNP and conventional HRP as the labeling of detection antibodies, respectively. Similar detection limits (LODs) of 2.5 ng mL⁻¹ vs. 1.0 ng mL⁻¹ were obtained toward RIgG with the ISPtNP labeling compared to HRP format. Intra- and inter-assay coefficients of variation were less than 13%. Importantly, the ISPtNP-based assay system could be suitable for use in a mass production of miniaturized lab-on-a-chip devices and open new opportunities for protein diagnostics and biosecurity.     

A simple and highly sensitive DNAzyme-based assay for nicotinamide adenine dinucleotide by ligase-mediated inhibition of strand displacement amplification

Existing strategies for detecting nicotinamide adenine dinucleotide (NAD⁺) or other cofactors are commonly cumbersome and moderate sensitive. We report a novel DNAzyme-based visual assay strategy for NAD⁺ based on ligase-mediated inhibition of the strand displacement amplification (SDA). In the presence of NAD⁺, the SDA can be inhibited by the ligase reaction of two primers, which can initiate the SDA reaction in the case of no ligation, resulting in a dramatically decreasing yield of the SDA product, a G-quadruplex DNAzyme that can quantitatively catalyze the formation of a colored product. Therefore, the quantitative analysis for NAD⁺ can be achieved visually with high sensitivity. The developed strategy provides a simple colorimetric approach with high selectivity against most interferences and a detection limit as low as 50 pM. It also provides a universal platform for investigating cofactors or other related small molecules as well as quantifying the activity of DNA ligases.     

A calixarene-based ion-selective electrode for thallium(I) detection

Three new calixarene Tl⁺ ionophores have been utilized in Tl⁺ ion-selective electrodes (ISEs) yielding Nernstian response in the concentration range of 10⁻²–10⁻⁶ M TlNO₃ with a non-optimized filling solution in a conventional liquid contact ISE configuration. The complex formation constants (log β_IL) for two of the calixarene derivatives with thallium(I) (i.e. 6.44 and 5.85) were measured using the sandwich membrane technique, with the other ionophore immeasurable due to eventual precipitation of the ionophore during these long-term experiments. Furthermore, the unbiased selectivity coefficients for these ionophores displayed excellent selectivity against Zn²⁺, Ca²⁺, Ba²⁺, Cu²⁺, Cd²⁺ and Al³⁺ with moderate selectivity against Pb²⁺, Li⁺, Na⁺, H⁺, K⁺, NH₄⁺ and Cs⁺, noting that silver was the only significant interferent with these calixarene-based ionophores. When optimizing the filling solution in a liquid contact ISE, it was possible to achieve a lower limit of detection of approximately 8 nM according to the IUPAC definition. Last, the new ionophores were also evaluated in four solid-contact (SC) designs leading to Nernstian response, with the best response noted with a SC electrode utilizing a gold substrate, a poly(3-octylthiophene) (POT) ion-to-electron transducer and a poly(methyl methacrylate)–poly(decyl methacrylate) (PMMA–PDMA) co-polymer membrane. This electrode exhibited a slope of 58.4 mV decade⁻¹ and a lower detection limit of 30.2 nM. Due to the presence of an undesirable water layer and/or leaching of redox mediator from the graphite redox buffered SC, a coated wire electrode on gold and graphite redox buffered SC yielded grossly inferior detection limits against the polypyrrole/PVC SC and POT/PMMA–PDMA SC ISEs that did not display signs of a water layer or leaching of SC ingredients into the membrane.     

Rapid capillary zone electrophoresis method for the determination of metal cations in beverages

A rapid and reliable capillary zone electrophoresis method for the determination of inorganic cations was developed. The complete separation of K⁺, Ba²⁺, Ca²⁺, Na⁺, Mg²⁺, Mn²⁺, Ni²⁺, Cd²⁺, Li⁺ and Cu²⁺ can be achieved in 4 min with a simple electrolyte composed by 10 mM imidazole as the carrier buffer and background absorbance provider and acetic acid as the complexing agent (pH 3.60). Injection was performed hydrostatically by elevating the sample at 10 cm for 30 s. The running voltage was +25 kV at room temperature. Indirect UV-absorption detection was achieved at 185 nm. The detection limit was in the range between 0.06 mg/l (Mg²⁺) and 0.57 mg/l (K⁺) and the quantification limits ranged from 0.10 mg/l (Ni²⁺) to 0.80 mg/l (Cu²⁺). The calibration graphs were linear in the concentration range from the quantification limit till at least 1 g/l in K⁺, 10 mg/l in Ba²⁺, Ca²⁺, Mg²⁺, Mn²⁺, Ni²⁺ and Cd²⁺, 40 mg/l in Na⁺ and 12 mg/l in Li⁺ and Cu²⁺. The repeatability, intraday and interday analysis were ≤1.55% and ≤3.64% for migration time and ≤3.38% and ≤3.63% for peak area. The method developed has been applied to several beverage samples with only a simple dilution and filtration treatment of the sample. The proposed method is simple, fast, cheap and it is achieved with common products in either laboratory. For these reasons, it is a very useful method for routine analysis.