四氟乙烯齐聚体的反应 四氟乙烯四、五聚体和芳香胺的反应

前已报道四氟乙烯四聚体(全氟-3,4-甲基己烯-3)(1)、五聚体(全氟-3,4-二甲基-4-乙基己烯-2)(2)和脂肪烷氧以及脂肪胺的亲核反应.本文报道化合物1,2和芳香胺如苯胺、β-萘胺的反应.由于烯烃1、2双键处于分子中间,因而当亲核试剂进攻时,双键容易发生重排,生成的末端基烯烃更具反应性,故导致一取代、二取代、三取代以及环化降解等复杂产物.     

Dependence of the Rate of Electrodeposition of Metals at Mono- and Multielectrodes on Voltage in the Case of an Exaltation Mechanism of Mass Transport

Dependences of the rate of copper deposition on mono- and multielectrodes out of dilute solutions of acetic acid at voltages of 20–250 V are compared. It is established that the same rate of deposition in the case of a multielectrode (25 electrodes with a diameter of 0.1 mm) takes place at a voltage that is lower by 2.7 times than that in the case of a monoelectrode with a diameter of 0.5 mm and the same area. The same results are obtained during electrodeposition of cadmium and thallium. In order to explain this effect, a two-layered model of potential distribution is suggested. In accordance with this model, the resistance of electrolyte in the vicinity of a multielectrode is equal to the sum of the resistance of the layer nearest to the electrode (where it is determined by the sum of conductances to each microelectrode) and the external layer, where the potential distribution is close to hemispherical. It is shown that calculations in accordance with this model allow one to give an estimate of the effect's scale that agrees with experiment and to predict its possible limits following an increase in the number of electrodes that make up a multielectrode.     

Calorimetric Study of the Bioremediation of a Polluted Soil

The calorimetric cells of a Setaram BT 2.15 flux calorimeter have been modified, in order to measure the heat production associated with microbial growth, with a continuous flow of gas and liquid through the sample. Good conditions for the growth of the microorganisms present in a polluted soil were determined and the possibility of the bioremediation examined. It was shown that the biodegradation of hydrocarbons adsorbed for a long time in the soil is a very slow process difficult to study with calorimetry. On the contrary, sodium succinate and different C₁₄ hydrocarbons were easily biodegradated, producing a large quantity of heat.This revised version was published online in November 2005 with corrections to the Cover Date.     

中国法上的行为能力宣告：制度内涵与解释论重塑

中国民法典编纂已经接近尾声,如何对民法典中的规则采取妥当的解释论立场是一个有待学界充分讨论的重要问题。结合《民法总则》行为能力宣告制度的分析,可以展示一种更加积极进取的理论立场。虽然《民法总则》关于行为能力宣告制度的规定与先前的规定差别不大,但通过条文的细致梳理,可以认为中国民法其实确立了有中国特色的二级制成年监护制度,区分了成年监护与成年照顾制度。在这一框架之下,通过法律解释的续造,可以在中国民法中构造出一个既尊重现行法,又符合世界发展潮流,而且能够有效应对中国老龄化趋势的制度体系。     

Determination of betamethasone and triamcinolone acetonide by GC-NCI-MS in excreta of treated animals and development of a fast oxidation procedure for derivatisation of corticosteroids.

The use of corticosteroids in combination with other hormonal substances has long been known to result in increased mass gain with bovines. Practice has demonstrated, however, that even the single use of a glucocorticoid may result in growth promoting effects. In addition to the popular dexamethasone, more recently other corticosteroids have also been misused for fattening purposes. The first part of this study deals with the detection of two of them, namely betamethasone and triamcinolone acetonide. Betamethasone was administered orally to a cow at a dose of 50 mg d-1 for 5 d, then later the same cow was injected intramuscularly with a dose of 50 mg of betamethasone dipropionate. Excretion in urine and faeces was followed with both HPLC-enzyme immunoassay and a previously described method based on negative chemical ionization mass spectrometry (NCI-MS) after oxidation. For the triamcinolone acetonide study a cow was treated with 50 mg d-1 of the drug during a 7 d period. Excretion in faeces was followed with GC-NCI-MS. As triamcinolone acetonide is resistant to the previously described oxidation procedure, however, a hydrolysis step had to be introduced prior to oxidation. In addition to this specific modification necessary for triamcinolone acetonide, in a subsequent part of this study the original oxidation procedure with pyridinium chlorochromate was re-investigated especially to shorten the procedure. With the introduction of potassium dichromate the reaction time could be decreased from 3 h to 10 min.     

Selection of anion exchangers for detoxification of dilute-acid hydrolysates from spruce

Six anion-exchange resins with different properties were compared with respect to detoxification of a dilute-acid hydrolysate of spruce prior to ethanolic fermentation with Saccharomyces cerevisiae. The six resins encompassed strong and weak functional groups as well as styrene-, phenol-, and acrylic-based matrices. In an analytical experimental series, fractions from columns packed with the different resins were analyzed regarding pH, glucose, furfural, hydroxymethylfurfural, phenolic compounds, levulinic acid, acetic acid, formic acid, and sulfate. An initial adsorption of glucose occurred in the strong alkaline environment and led to glucose accumulation at a later stage. Acetic and levulinic acid passed through the column before formic acid, whereas sulfate had the strongest affinity. In a preparative experimental series, one fraction from each of six columns packed with the different resins was collected for assay of the fermentability and analysis of glucose, mannose, and fermentation inhibitors. The fractions collected from strong anion-exchange resins with styrene-based matrices displayed the best fermentability: a sevenfold enhancement of ethanol productivity compared with untreated hydrolysate. Fractions from a strong anion exchanger with acrylic-based matrix and a weak exchanger with phenol-based resin displayed an intermediate improvement in fermentability, a four- to fivefold increase in ethanol productivity. The fractions from two weak exchangers with styrene- and acrylic-based matrices displayed a twofold increase in ethanol productivity. Phenolic compounds were more efficiently removed by resins with styrene-and phenol-based matrices than by resins with acrylic-based matrices.     

Superiority of a new gradient system utilizing a critical threshold for the adsorption capacity of polypeptides to column packing when compared with a standard gradient system for the simultaneous and quantitative analysis of polypeptides

Compared with a standard gradient system, the new gradient system which we developed has a major advantage because it permits a wide range of acetonitrile content, e.g. more than the critical threshold, in the polypeptide solution and allows the quantitative analysis of the polypeptide with satisfactory analytical precision. Additionally, this new gradient system allows the enhancement of the sensitivity of the polypeptide analysis proportionate to the increased volume of solution loaded with the same levels of precision. In contrast, when using a standard gradient system it is difficult to analyze a polypeptide quantitatively with good precision due to either adsorption to various materials or to irregular change in the ratio between a retained and a passed peak of the polypeptide. Additionally, the appearance of a passed peak results in a loss in the sensitivity of the polypeptide analysis, although no adsorption of a polypeptide to various materials occurs in a solution with acetonitrile content more than the critical threshold. Consequently, the new gradient system is effective for the simultaneous and quantitative analysis of different polypeptides with good precision and without any loss of sensitivity due to either adsorption to various materials or the appearance of a passed peak.     

Molecular Understanding of Collagen Stabilization: Interaction of Valeraldehyde with Collagen

The present study explains the molecular level interaction of valeraldehyde with collagen. Valeraldehyde is a monoaldehyde, which involves crosslinking with protein through covalent linkages. The role of valeraldehyde as a crosslinking agent for collagen stabilization was studied. Molecular modeling approaches was used to understand the interaction of collagen like peptide with valeraldehyde, which mimic the aldehyde tanning processes involved in protein stabilization. Crosslinking efficiency of valeraldehyde was found to increase with an increase in concentration due to the higher availability of aldehydic groups involved in crosslinking with collagen. Valeraldehyde interacted collagen membrane showed an increase in thermal stability by 25°C at pH 8. In the presence of valeraldehyde, collagen fibrils nucleation center was shifted from a lower to a higher range. Shift in the nucleation center was observed in the reduction of gelling time. Water accessibility in valeraldehyde interacted collagen membrane was reduced due to a higher crosslinking rate in the collagen. Modified collagen membrane by valeraldehyde at incubation of about 96 h showed higher resistance to collagenolytic activity of 81%. The amino groups reacting appear to be involved in crosslinking with valeraldehyde. Several interaction sites were identified and the docking energy obtained was ?5.539 kcal/mol. The participation of the aldehyde group with amino groups in collagen was observed, which plays a dominant role in the stabilization of peptide by valeraldehyde. It was found that complexes exhibit covalent bonding, hydrogen bonding and electrostatic interaction in the process of stabilization.     

Development of a fibrinolytic surface: specific and non-specific binding of plasminogen

Plasminogen is the primary zymogen in the fibrinolytic pathway, and its primary function involves degradation of fibrin. Biomaterials often show adsorption of fibrinogen and subsequent formation of fibrin. Plasminogen's function in vivo could be adapted to facilitate its activation and fibrinolytic function on a biomaterial surface. In order to elucidate plasminogen function adsorbed to a model fibrinolytic surface ligands known to affect plasminogen properties in solution were attached to model silica surfaces to study the effects of immobilized ligands as fibrinolytic activators. Model silica surfaces were synthesized which contained covalently attached lysine moieties (surface I), sulfonate moieties (surface II) or a combination of both (surface III). Lysine moieties on these model surfaces interact specifically with multiple lysine-binding sites of plasminogen and induce a number of changes in conformation and function. Sulfonate moieties interact non-specifically with accessible lysine and arginine residues of plasminogen and also affect the function of plasminogen. Inherent physico-chemical properties monitored following plasminogen adsorption were activation to plasmin, enzymatic activity, fluorescent intensity, and fluorescent polarization, monitored by total internal reflection fluorescence, each of which are affected by plasminogen conformation.

Correlations were as follows: increased fluorescent intensity and decreased fluorescent polarization were indicative of plasminogen conformational changes and are correlated to increased enzymatic activity of plasmin. Surfaces I and III showed a 20% increase in fluorescent intensity, and a 25% and 8% decrease in fluorescent polarization, respectively, in comparison to surface II. The specific activity for surfaces I and III was increased 11.3 and 1.8 fold above that found for surface II. Plasminogen incubated with sulfonate groups in solution resulted in no increase in fluorescent intensity and a slight decrease in fluorescent polarization as compared with plasminogen alone and reduced specific activity of plasmin in the presence of sulfonate as compared with plasmin alone. Lysine or ε-aminocaproic acid (ACA) incubated with plasmin in solution showed a 30% and 10% increase in fluorescent intensity, a 24% and 5% decrease in fluorescent intensity, and maximum specific activity increased 3.6 and 2.5 fold, respectively, over plasminogen alone.

Interactions of plasminogen with ligands for its lysine-binding sites produced dramatic effects both in solution and adsorbed to model fibrinolytic surfaces. The characterization of these interactions along with known fibrin interactions will allow selection of appropriate surface modifications to enhance the fibrinolysis of thrombus formed at a biomaterial interface. These modifications may lead to a native-like surface structure to protein and cellular components of blood and create a more biocompatible surface.     

二氢(4,5)熏衣草醇的合成

叙述了以易得的异戊醇为原料合成熏衣草醇的一种新型二氢衍生物的方法. 而异戊醇则可以从南中国的糖密发酵制造乙醇的蒸馏残液中得到. 异戊基氯和丙酮的相转移催化缩合以43%的产率得到6-甲基-2-庚酮, 再经甲基化和脱氯化氢导致2,6-二甲基庚烯-2. 该烯烃在氯化锡-二氯甲烷中,与多聚甲醛的Prins反应以41.2%的产率得到二氢(4,5)熏衣草醇. 它似乎是有较淡熏衣草醇香气的类似物.     

纳米结构表面上冷凝液滴的生长模式及部分润湿液滴的形成机制

分析并计算了纳米结构表面上冷凝液滴按照不同途径长大的过程中液滴能量的增加速率, 并以能量增加最小为判据来确定液滴的生长途径. 结果表明, 纳米结构内形成的冷凝液斑在初期按接触角(CA)增加的模式生长时, 其能量增加速率远低于其它模式, 于是, 初始液斑先按增大接触角、并保持底面积不变的模式生长, 直至液滴达到前进角状态. 此后, 沿接触角增加的模式长大所导致的能量增加速率开始远高于其它生长模式, 于是液滴三相线开始移动, 底面积开始增加, 但接触角保持不变. 液滴所增加的底面积可以呈润湿或复合两种状态, 分别形成Wenzel 液滴及部分润湿液滴, 前者的表观接触角一般小于160°, 而后者则明显大于160°. 液滴的生长模式及其润湿状态均与纳米结构参数密切相关, 仅当纳米柱具有一定高度、且间距较小时, 冷凝液滴才能呈现部分润湿状态. 最后, 本模型对纳米结构表面上冷凝液滴润湿状态的计算结果与绝大部分实测结果相一致, 准确率达到91.9%, 明显高于已有公式的计算准确率.     

Nature of the intermediates in gold(I)-catalyzed cyclizations of 1,5-enynes

The carbene or carbocationic nature of the intermediates in the gold-catalyzed cycloisomerization of 1,5-enynes can be revealed, depending on the ligands on the gold catalysts. Gold complexes with highly electron-donating ligands promote reactions that proceed via intermediates with carbene-like character, leading to products with a bicyclo[3.1.0]hexene skeleton. The intermediate cyclopropyl endo-gold carbenes formed in this cyclization have been trapped, for the first time, to give biscyclopropane derivatives in a reaction that proceeds in a concerted fashion, according to DFT calculations.     

Influence of structure and of tensile modulus of adhesive joint on mechanical strength of metal plates bonded by various epoxy resins

A double-lap, adhesive bonded joint, has been optimized with a fixed thickness of the core, in order to maximize the breaking force, and to obtain reproducible results. The shear profile, longitudinal, corresponds in the central region of the overlapping to classical theory, but is represented empirically, near the extremities, by the transversal shear in outer adherends. This furnishes an abscissa of the shear maximum in the joint, that compares with the location expected in a previous study and indicates also the critical level of shear, at the threshold of microcrack initiation, that compares with the breaking strength of the solid adhesive, in a similar manner for three different adhesives for which we observed a certain length of sheared joint with a cohesive fracture.     

新烟碱类化合物药效构象的分子对接研究

从烟碱型乙酰胆碱受体(nACHR)-烟碱(nicotine)复合体晶体模型出发, 采用SYBYL 6.92软件包中FlexX分子对接模块对新烟碱类化合物的3种已上市化合物吡虫啉、噻虫啉、烯啶虫胺和3种吡虫啉的结构衍生物同受体蛋白作用的精确模型进行了研究. 通过全局搜索方法构建配体的构象库进行对接, 依据构象间RMS值对结果进行分类结合CScore打分函数数据对对接结果进行筛选, 最终给出合理的新烟碱类化合物-烟碱型乙酰胆碱受体的药效作用构象模型: 配体吡啶环上氮原子通过水分子同受体Leu102, Met114形成氢键并且咪唑环或噻唑环上亲水侧链同受体CYS187或SER186形成氢键, 疏水侧链同疏水部位A (TYR164, TRP53, TYR89以及TYR185残基), 或疏水部位B (TYR132, CYS187和CYS188)相互作用. 此模型同早先有关文献报道的试验结果部分吻合, 充分表明了其合理性. 同时依据本构象模型, 在新烟碱类化合物结构方面提出了一些改良建议并为研究其高选择性指出方向.     

Role of electric field on surface wetting of polystyrene surface

The role of surface charge in fluid flow in micro/nanofluidics systems as well as the role of electric field to create switchable hydrophobic surfaces is of interest. In this work, the contact angle (CA) and contact angle hysteresis (CAH) of a droplet of deionized (DI) water were measured with applied direct current (DC) and alternating current (AC) electric fields. The droplet was deposited on a polystyrene (PS) surface, commonly used in various nanotechnology applications, coated on a doped silicon (Si) wafer. With the DC field, CA decreased with an increase in voltage. Because of the presence of a silicon oxide layer and a space charge layer, the change of the CA was found to be lower than with a metal substrate. The CAH had no obvious change with a DC field. An AC field with a positive value was applied to the droplet to study its effect on CA and CAH. At low frequency (lower than 10 Hz), the droplet was visibly oscillating. The CA was found to increase when the frequency of the applied AC field increased from 1 Hz to 10 kHz. On the other hand, the CA decreased with an increasing peak-peak voltage at or lower than 10 kHz. The CAH in the AC field was found to be lower than in the DC field and had a similar trend to static CA with increasing frequency. A model is presented to explain the data.     

Control of McKibben Polymeric Artificial Muscles by Means of Buffer Solutions

Reversible swelling and de-swelling of pH reactive polymers are mainly made using strong bases and strong acids, typically with pH equal to 0 or 1 and 14 or 13. As a consequence, pH-artificial muscles are triggered off at a pH too high for internal use of such muscles inside the human body. The paper analyses the possibility of using weak base-weak acid buffers to generate the ion circulation necessary for swelling/de-swelling phenomena with a limited pH-range. The paper further reports experiments with ion-exchange resins swelling and de-swelling in response to standard NaHCO₃/CH₃COOH + CH₃COONa weak base-weak acid solutions. The ion exchange resin is placed inside the inner tube of a McKibben-braided structure whose functioning we have discussed elsewhere in connection with its reliability to define a chemo-mechanical artificial muscle with static and dynamic behaviour close to human skeletal muscle. We experimentally show that a 0.25 M buffer solution leads to a maximum isometric force and a contraction time response similar to that obtained with 0.1 M NaOH/HCl strong base-strong acid. As a consequence, our McKibben polymeric artificial muscle is now controlled within a 3.8 pH-range: muscle contraction is triggered at about 8.3 pH, and muscle relaxation at about a 4.5 pH. The dynamic performance of a 170 mm long/7 mm diameter in isotonic mode, with loads between 0.25 kg to 10 kg, is reported.     

Mechanistic investigation of the iridium-catalysed alkylation of amines with alcohols

The [Cp*IrCl(2)](2)-catalysed alkylation of amines with alcohols was investigated using a combination of experimental and theoretical methods. A Hammett study involving a series of para-substituted benzyl alcohols resulted in a line with a negative slope. This clearly documents that a positive charge is built up in the transition state, which in combination with the measurement of a significant kinetic isotope effect determines hydride abstraction as being the selectivity-determining step under these conditions. A complementary Hammett study using para-substituted anilines was also carried out. Again, a line with a negative slope was obtained suggesting that nucleophilic attack on the aldehyde is selectivity-determining. A computational investigation of the entire catalytic cycle with full-sized ligands and substrates was performed using density functional theory. The results suggest a catalytic cycle where the intermediate aldehyde stays coordinated to the iridium catalyst and reacts with the amine to give a hemiaminal which is also bound to the catalyst. Dehydration to the imine and reduction to the product amine also takes place without breaking the coordination to the catalyst. The fact that the entire catalytic cycle takes place with all the intermediates bound to the catalyst is important for the further development of this synthetic transformation.     

Mechanics of nanoindentation on a monolayer of colloidal hollow nanoparticles

We explore the collective mechanical behavior of monolayer assemblies composed of close-packed arrays of hollow silica nanoparticles using a spherical nanoindentor. Seven types of well-defined hollow nanoparticles are studied with their radii ranging from 100 to 300 nm and shell thickness ranging from 14 to 44 nm. Micromechanical models reveal the underlying deformation mechanisms during indentation, where the consecutive contacting of the indentor with an increasing number of nanoparticles results in a nonlinear increase in the indentation force with penetration depth. Each contacted hollow nanoparticle successively locally bends, flattens, and then locally buckles. The effective indentation modulus of the monolayer film, which is obtained by a Hertzian fit to the experimental data, is found to be proportional to the elastic modulus of the nanoparticle shell material and scales exponentially with the ratio of particle shell thickness t to radius R to the power of 2.3. Furthermore, we find that for a constant film density with the same (t)/(R) of the constituent nanoparticles, smaller particles with a thinner shell can provide a higher effective indentation modulus, compared to their larger diameter and thicker shell counterparts. This study provides useful insights and guidance for constructing high-performance lightweight nanoparticle films and coatings with potential applications in tailoring stiffness and mechanical energy absorption.     

Origin of strong chiroptical activities in films of nonafluorenes with a varying extent of pendant chirality

Novel nonafluorenes with a varying extent of pendant chirality were synthesized for an investigation of the origins of chiroptical activities in neat films. Thermal annealing of 4-microm-thick sandwiched films and of 90-nm-thick spin-cast films, all on surface-treated substrates, produced monodomain glassy films characterized as a right-handed cholesteric stack with a helical pitch length ranging from 180 to 534 nm and from 252 to 1151 nm, respectively. The observed strong circular dichroism (CD) and g(e) as functions of helical pitch length in single-substrate monodomain glassy cholesteric films were quantitatively interpreted with a circularly polarized fluorescence theory accounting for light absorption, emission, and propagation in a cholesteric stack. Although intertwined molecular helices were likely to be present, cholesteric stacking of rodlike molecules seemed to be the predominant contributor to the strong chiroptical activities. All the cholesteric stacks comprising a polydomain glassy film on an untreated substrate were found to contribute to CD and g(e) largely to the same extent as in a monodomain film. A circularly polarized blue organic light-emitting diode containing a nonafluorene film resulted in a g(e) of 0.35 with a luminance yield of 0.94 cd/A at 20 mA/cm(2), the best performance to date.