Characterization and application of quantum dot nanocrystal–monoclonal antibody conjugates for the determination of sulfamethazine in milk by fluoroimmunoassay

Quantum dot (Qdot) nanocrystals have been increasingly used as fluorescence labels in fluoroimmunoassays recently because of their excellent optical characteristics. In this paper, a new monoclonal antibody (MAb) against sulfamethazine (SMZ) was successfully produced and linked to Qdot nanocrystals by covalent coupling. The Qdot–MAb conjugates were characterized by SDS-PAGE and high-performance capillary electrophoresis (HPCE). An enzyme-linked immunosorbent assay (ELISA) method was utilized to evaluate the antigen–antibody binding affinity and then a novel direct competitive fluorescence-linked immunosorbent assay (cFLISA) for the detection of SMZ in milk by using Qdots as fluorescent labels was evaluated. The results showed that the 50% inhibition values (IC₅₀) of the cFLISA were 4.3 ng/mL in milk and 5.2 ng/mL in PBS, and the limits of detection (LODs) were 0.6 ng/mL in milk and 0.4 ng/mL in PBS, respectively. The recoveries of SMZ from spiked milk samples at levels of 10–100 ng/mL ranged from 94 to 106%, with coefficients of variation (CVs) of 2.1–9.2%. Figure Shematic diagram of the direct cFLISA procedure Jianzhong Shen and Fei Xu contributed equally to this work.     

Microchannel chips for the multiplexed analysis of human immunoglobulin G–antibody interactions by surface plasmon resonance imaging

We report the multiplexed, simultaneous analysis of antigen–antibody interactions that involve human immunoglobulin G (IgG) on a gold substrate by the surface plasmon resonance imaging method. A multichannel, microfluidic chip was fabricated from poly(dimethylsiloxane) (PDMS) to selectively functionalize the surface and deliver the analyte solutions. The sensing interface was constructed using avidin as a linker layer between the surface-bound biotinylated bovine serum albumin and biotinylated anti-human IgG antibodies. Four mouse anti-human IgG antibodies were selected for evaluation and the screening was achieved by simultaneously monitoring protein–protein interactions under identical conditions. Antibody–antigen binding affinities towards human immunoglobulin were quantitatively compared by employing Langmuir adsorption isotherms for the analysis of SPRi responses obtained under equilibrium conditions. We were able to identify two IgG samples with higher affinities towards the target, and the determined binding kinetics falls within the typical range of values reported in the literature. Direct measurement of proteins in serum samples by SPR imaging was achieved by developing methods to minimize nonspecific adsorption onto the avidin-functionalized surface, and a limit of detection (LOD) of 6.7 nM IgG was obtained for the treated serum samples. The combination of SPR imaging and multichannel PDMS chips offers convenience and flexibility for sensitive and label-free measurement of protein–protein interactions in complex conditions and enables high-throughput screening of pharmaceutically significant molecules. Figure Microchannel SPR imaging for protein–protein interactions     

Graphene quantum dot–based electrochemical biosensing for early cancer detection

Electrochemical biosensing systems coupled with graphene quantum dots (GQDs) have demonstrated suitability for cancer diagnostic strategies, particularly to identify the changes facilitating the early phases of tumorigenesis as well as to detect ultralow concentrations of biomarkers that distinguish between normal and malignant cells. GQDs, known as a novel class of zero-dimensional semiconductor nanocrystals, are tiny graphene particles arranged in a honeycomb structure with a size range of 1–50 nm. The size of these GQDs is comparable with the size of biomolecules, thereby providing an ideal platform to study biomolecules such as proteins, cells, and viruses. GQDs are a superior platform for specific and sensitive recognition of cancer biomarkers; they are highly synergistic with electrochemical sensors. This review will shed light on the recent advancements made in the field of GQD-based electrochemical sensors for early cancer detection, with the aim of highlighting the prospects for further development in cancer diagnostics.     

An improved method for ratiometric fluorescence detection of pH and Cd using fluorescein isothiocyanate–quantum dots conjugates

In this study, thioglycolic acid capped-CdTe quantum dots (QDs) were modified by polyethylenimine (PEI), and then combined with fluorescein isothiocyanate (FITC) to fabricate FITC–CdTe conjugates. The self-assembly of FITC, CdTe and PEI was ascribed to electrostatic interactions in aqueous solution. The resulting conjugates were developed toward two routes. In route one, ratiometric photoluminescence (PL) intensity of conjugates (I_FITC/I_QDs) was almost linear toward pH from 5.3 to 8.7, and a ratiometric PL sensor of pH was favorable obtained. In route two, firstly added S²⁻ induced remarkable quenching of QDs PL peak (at the “OFF” state), which was restored due to following addition of Cd²⁺ (at the “ON” state). In the conjugates, successive introduction of S²⁻ and Cd²⁺ hardly influenced on FITC PL peaks. According to this PL “OFF-ON” mode, a ratiometric PL method for the detection of Cd²⁺ was achieved. Experimental results confirmed that the I_FITC/I_QDs exhibited near linear proportion toward Cd²⁺ concentration in the range from 0.1 to 15 μM, and the limit of detection was 12 nM. Interferential experiments adequately testified that the proposed sensors of pH and Cd²⁺ were practicable in real samples and complex systems. In comparison with conventional analytical techniques, the ratiometric PL method was simple, rapid, economic and highly selective.     

Sequential injection immunoassay for human bone morphogenic protein-7 using an immunoreactor immobilized with anti-human bone morphogenic protein-7 antibody–CdSe/ZnS quantum dot conjugates

The detection of human bone morphogenic protein-7 (BMP-7) was achieved using a sequential injection immunoassay (SIIA) system. The SIIA system is based on the binding between BMP-7 and anti-human BMP-7 (AbBMP7)–CdSe/ZnS quantum dot (QD) conjugates immobilized onto a glass disk or an optical fiber, using fluorescence detection at excitation and emission wavelengths of 470 nm and 580 nm, respectively. The AbBMP7–QD conjugates were prepared by conjugating anti-human BMP-7 antibody (AbBMP7) to hydrophilic CdSe/ZnS core/shell quantum dots (QDs). The SIIA system was fully automated using software written in the LabVIEW™ development environment. The analytical performance of the SIIA system was characterized with a number of variables such as carrier flow rate and elution buffer. Under partially optimized operating conditions, the SIIA system had a linear calibration graph at up to 10.0 ng mL⁻¹ BMP-7 (R² ≥ 0.975) and a sample frequency of two samples per hour. The SIIA system with an optical fiber immunosensor was used to detect and quantify BMP-7 in spiked real samples obtained from a biological process with recoveries in the range of 95–102%.     

Magnetic Fe3O4@Au composite-enhanced surface plasmon resonance for ultrasensitive detection of magnetic nanoparticle-enriched α-fetoprotein

Small molecules or analytes present at low concentrations are difficult to detect directly using conventional surface plasmon resonance (SPR) techniques because only small changes in the refractive index of the medium are typically induced by the binding of these analytes. Here, we present an amplification technique using core–shell Fe₃O₄@Au magnetic nanoparticles (MNPs) for an SPR bioassay. To evaluate this amplification effect, a novel SPR sensor based on a sandwich immunoassay was developed to detect α-fetoprotein (AFP) by immobilizing a primary AFP antibody (Ab₁) on the surface of a 3-mercapto-1-propanesulfonate/chitosan-ferrocene/Au NP (MPS/CS-Fc/Au NP) film employing Fe₃O₄@Au–AFP secondary antibody conjugates (Fe₃O₄@Au–Ab₂) as the amplification reagent. The stepwise fabrication of the biosensor was characterized using UV-vis spectroscopy, electrochemical impedance spectroscopy, and cyclic voltammetry. A calibration curve of Fe₃O₄@Au–Ab₂ conjugates amplification for AFP detection was obtained to yield a correlation in the range of 1.0–200.0 ng mL⁻¹ with a detection limit of 0.65 ng mL⁻¹, and a significant increase in sensitivity was therefore afforded through the use of Fe₃O₄@Au–Ab₂ conjugates as an amplifier. This magnetic separation and amplification strategy has great potential for the detection of other biomolecules of interest with low interference and high sensitivity by changing the antibody label used in the Fe₃O₄@Au–antibody conjugates.     

Gold nanoparticle–antibody conjugates for specific extraction and subsequent analysis by liquid chromatography–tandem mass spectrometry of malondialdehyde-modified low density lipoprotein as biomarker for cardiovascular risk

Oxidized low-density lipoproteins (OxLDLs) like malondialdehyde-modified low-density lipoprotein (MDA-LDL) play a major role in atherosclerosis and have been proposed as useful biomarkers for oxidative stress. In this study, gold-nanoparticles (GNPs) were functionalized via distinct chemistries with anti-MDA-LDL antibodies (Abs) for selective recognition and capture of MDA-LDL from biological matrices. The study focused on optimization of binding affinities and saturation capacities of the antiMDA-LDL-Ab-GNP bioconjugate by exploring distinct random and oriented immobilization approaches, such as (i) direct adsorptive attachment of Abs on the GNP surface, (ii) covalent bonding by amide coupling of Abs to carboxy-terminated-pegylated GNPs, (iii) oriented immobilization via oxidized carbohydrate moiety of the Ab on hydrazide-derivatized GNPs and (iv) cysteine-tagged protein A (cProtA)-bonded GNPs. Depending on immobilization chemistry, up to 3 antibodies per GNP could be immobilized as determined by ELISA. The highest binding capacity was achieved with the GNP-cProtA-Ab bioconjugate which yielded a saturation capacity of 2.24 ± 0.04 μg mL⁻¹ GNP suspension for MDA-LDL with an affinity K_d of 5.25 ± 0.11 × 10⁻¹⁰ M. The GNP-cProtA-antiMDA-LDL bioconjugate revealed high specificity for MDA-LDL over copper(II)-oxidized LDL as well as native human LDL. This clearly demonstrates the usefulness of the new GNP-Ab bioconjugates for specific extraction of MDA-LDL from plasma samples as biomarkers of oxidative stress. Their combination as specific immunoextraction nanomaterials with analysis by LC–MS/MS allows sensitive and selective detection of MDA-LDL in complex samples.     

RNA aptamer-based optical nanostructured sensor for highly sensitive and label-free detection of antigen–antibody reactions

Developments of optical protein sensors with nanostructure based on the noble metals have currently received great attention for their high efficiency and simultaneous analysis of various important biomolecules from proteomics to genetics. In this study, we exploited the absorbance spectra of gold-capped nanoparticles substrate for label-free detections of antigen–antibody reactions using a specific thiolated RNA aptamer. These synthesized RNA aptamers have been optimized to bind to the Fc portion of the human IgG1 subclass, due to their ability to orient antibodies direction on the gold surface. After attaching the anti-fibrinogen antibodies on the surface via these linkers, our thiolated RNA aptamer-based nanostructured sensors were easily applicable to specific detections of fibrinogen with a limit of detection of 0.1 ng/mL. These nanostructured sensor-based models will open a way to display numerous immunosensors as well as to develop other functionally similar sensors which could then be expanded into multi-arrays assay systems.     

Synthesis of blockwise alkylated tetrasaccharide–organic quantum dot complexes and their utilization for live cell labeling with low cytotoxicity

Bioimaging is a key to understanding immune responses, cell differentiation, and development. Quantum dots (QDs) conjugated with monoclonal antibodies and other biomolecules are currently utilized for flow cytometry and immunohistochemistry, but monoclonal antibody–QD complexes are of limited use when cell surface markers are not available. In this study, we synthesized novel amphiphilic blockwise alkylated tetrasaccharides and developed a simple method for labeling a wide variety of live cells with organic QDs encapsulated with these carbohydrates. The novel amphiphilic blockwise alkylated tetrasaccharides were as follows: methyl β-d-glucopyranosyl-(1 → 4)-β-d-glucopyranosyl-(1 → 4)-2,3,6-tri-O-methyl-β-d-glucopyranosyl-(1 → 4)-2,3,6-tri-O-methyl-d-glucopyranoside (1), methyl β-d-galactopyranosyl-(1 → 4)-β-d-glucopyranosyl-(1 → 4)-2,3,6-tri-O-methyl-β-d-glucopyranosyl-(1 → 4)-2,3,6-tri-O-methyl-d-glucopyranoside (2), ethyl β-d-glucopyranosyl-(1 → 4)-β-d-glucopyranosyl-(1 → 4)-2,3,6-tri-O-ethyl-β-d-glucopyranosyl-(1 → 4)-2,3,6-tri-O-ethyl-d-glucopyranoside, (3), and ethyl β-d-galactopyranosyl-(1 → 4)-β-d-glucopyranosyl-(1 → 4)-2,3,6-tri-O-ethyl-β-d-glucopyranosyl-(1 → 4)-2,3,6-tri-O-ethyl-d-glucopyranoside (4). The newly synthesized blockwise alkylated tetrasaccharides spontaneously assembled into micelle-like particles, in which the hydrophobic moiety of the blockwise alkylated tetrasaccharides played an important role. They were less toxic to human cells than octyl β-d-glucopyranoside, a commonly used amphiphilic glucoside. Flow cytometry and confocal laser scanning microscopy revealed that the blockwise alkylated tetrasaccharide–organic QD complexes were stably attached to live cells. The affinity of compounds 1 and 2 to the live cell surface was slightly higher than that of compounds 3 and 4. Because the preparation of these carbohydrate–QD complexes is simple and does not require sophisticated equipment, and because the complexes can be autonomously attached to a wide spectrum of cell lines, they can be used as cell labeling reagents in biomedical studies.     

Quasi solid-state quantum dot–sensitized solar cells with polysulfide gel polymer electrolyte for superior stability

Journal of Solid State Electrochemistry - In the case of sensitized solar cells, liquid electrolyte materials are the fundamental components due to its advantage of superior conductivity. However,...     

A surface wipe sampling and LC–MS/MS method for the simultaneous detection of six antineoplastic drugs commonly handled by healthcare workers

An effective wipe sampling and LC–MS/MS method was developed to simultaneously analyze six commonly administered antineoplastic drugs in stainless steel surface. The analyzed drugs were methotrexate, paclitaxel, cyclophosphamide, 5-fluorouracil, vincristine, and oxaliplatin, a frequently prepared antineoplastic drug that has not been included among any of the published simultaneous detection methods. The established method was used to evaluate the recoveries of antineoplastic drugs on brand new and worn stainless steel surfaces by wiping the plates with a Whatman filter paper wetted with 0.5 mL of water/methanol (20:80) with 0.1 % formic acid followed by LC–MS/MS before desorbing the filter with a water/methanol (50:50) solution. A significant decrease in the recovery of all evaluated drugs was found when worn plates were used. Additionally, the inter-personnel variability on drug recoveries during wiping procedures was evaluated. Significantly higher recoveries were achieved by the personnel with more training and experience versus personnel without prior experience. Finally, a laboratory stability test was developed to assess the degradation of the antineoplastic drugs during replicated shipping conditions. With the exception of vincristine sulfate which exhibited a significant (p?<?0.05) degradation after 48 h, all evaluated drugs were stable during the first 24–48 h. However, after 144 h, an increase in the degradation of all evaluated drugs was observed, with oxaliplatin and 5-fluorouracil exhibiting the most degradation.     

Liquid chromatographic analysis of Hg(II) binding by thiol-rich peptides using both UV–vis and electrochemical detection

An existing method for HPLC determination of thiol-containing peptides has been successfully adapted to the analysis of mixtures of glutathione (GSH) and some related peptides with their Hg(II) complexes as a first approach to the study of phytochelatin extracts. The separation was achieved in a C18 column with a mobile phase of 0.1% trifluoroacetic acid (TFA) and 0.1% TFA/acetonitrile. Non-derivative UV–vis detection at 202 nm used in the original method has been complemented with amperometric detection at 1.2 V on glassy carbon electrode. Two different Hg(II)–GSH complexes were observed by both detection modes and confirmed by mass spectrometry.     

Rolling cycle amplification based single-color quantum dots–ruthenium complex assembling dyads for homogeneous and highly selective detection of DNA

In this work, a new, label-free, homogeneous, highly sensitive, and selective fluorescent biosensor for DNA detection is developed by using rolling-circle amplification (RCA) based single-color quantum dots–ruthenium complex (QDs–Ru) assembling dyads. This strategy includes three steps: (1) the target DNA initiates RCA reaction and generates linear RCA products; (2) the complementary DNA hybridizes with the RCA products to form long double-strand DNA (dsDNA); (3) [Ru(phen)₂(dppx)]²⁺ (dppx = 7,8-dimethyldipyrido [3,2-a:2′,3′-c] phenanthroline) intercalates into the long dsDNA with strong fluorescence emission. Due to its strong binding propensity with the long dsDNA, [Ru(phen)₂(dppx)]²⁺ is removed from the surface of the QDs, resulting in restoring the fluorescence of the QDs, which has been quenched by [Ru(phen)₂(dppx)]²⁺ through a photoinduced electron transfer process and is overlaid with the fluorescence of dsDNA bonded Ru(II) polypyridyl complex (Ru-dsDNA). Thus, high fluorescence intensity is observed, and is related to the concentration of target. This sensor exhibits not only high sensitivity for hepatitis B virus (HBV) ssDNA with a low detection limit (0.5 pM), but also excellent selectivity in the complex matrix. Moreover, this strategy applies QDs–Ru assembling dyads to the detection of single-strand DNA (ssDNA) without any functionalization and separation techniques.     

Enhanced immunoassay for porcine circovirus type 2 antibody using enzyme-loaded and quantum dots-embedded shell–core silica nanospheres based on enzyme-linked immunosorbent assay

Boosting the detection sensitivity of enzyme-linked immunosorbent assay (ELISA) is significant to the early clinical diagnosis of various diseases. Here, we developed a versatile immunosensor using silica nanospheres as carriers for sensitive detection of porcine circovirus type 2 (PCV2) antibody. With HRP enzyme covalently immobilized on the silica nanospheres and CdSe nanocrystals embedded inside, these signal probes were successfully utilized in the sensitive detection of PCV2 antibody by ELISA, fluorometry and square-wave voltammetry (SWV). To further demonstrate the performance of the immunosensor, Human IgG (HIgG) was used as a model analyte. Since more HRP and CdSe QDs were loaded, 5-, 200- and 400-fold enhancements in amplified ELISA, fluorometry and voltammetry responses for HIgG could be achieved compared to conventional ELISA. The respective detection limits of theses methods for HIgG were 3.9, 0.1 and 0.05 ng mL⁻¹ with a RSD below 5% for amplified ELISA, fluorescence and SWV measurements. Additionally, a 100-fold improvement was obtained in the detection sensitivity for PCV2 antibody immunoassay. The versatile immunosensor exhibits good sensitivity, stability and reproducibility, suggesting its potential applications in clinical diagnostics.     

A Quick and Reproducible Silanization Method by Using Plasma Activation for Hydrophobicity-Based Kinesin Single Molecule Fluorescence–Microscopy Assays

Single-molecule assays often require functionalized surfaces. One approach for microtubule assays renders surfaces hydrophobic and uses amphiphilic blocking agents. However, the optimal hydrophobicity is unclear, protocols take long, produce toxic waste, and are susceptible to failure. Our method uses plasma activation with hydrocarbons for hexamethyldisilazane (HMDS) silanization in the gas phase. We measured the surface hydrophobicity, its effect on how well microtubule filaments were bound to the surface, and the number of nonspecific interactions with kinesin motor proteins. Additionally, we tested and discuss the use of different silanes and activation methods. We found that even weakly hydrophobic surfaces were optimal. Our environmentally friendly method significanty reduced the overall preparation effort and resulted in reproducible, high-quality surfaces with low variability. We expect the method to be applicable to a wide range of other single-molecule assays.     

Study on the interaction between hepatitis B virus functional receptor NTCP and ligands by surface plasmon resonanceEI北大核心CSCD

Sodium/taurocholate cotransporting polypeptideNTCPSLC10A1mediates the entry of hepatitis B virusHBVinto hepatocytes. NTCP is the functional receptor for HBV infection and a potential target for anti-HBV drugs. At presentmethods that evaluate the interaction between NTCP and its ligands are still limited. In this paperthe recombinant NTCP was expressed by Sf9 cells and purifiedand fixed on the surface plasmon resonanceSPRsensor chip by indirect antibody coupling. According to SPR kinetic analysisthe equilibrium dissociation constant KD of HBV PreS1 polypeptide binding to NTCP is 4.93 μµmol/L. The equilibrium dissociation constant KD of classic substrate taurocholate sodium for NTCP is 25.3 μµmol/L. Rather than the inhibition capacity of compounds to block NTCP substrate transportationthe equilibrium dissociation constant measured by SPR method can compare the binding affinity of compounds to NTCPand can be used to develop anti-HBV drugs based on NTCP-PreS1 interaction. © 2022, Youke Publishing Co.,Ltd. All rights reserved.