Aptamer-functionalized silver nanoparticles for scanometric detection of platelet-derived growth factor-BB

In this work, we reported a scanometric assay system based on the aptamer-functionalized silver nanoparticles (apt-AgNPs) for detection of platelet-derived growth factor-BB (PDGF-BB) protein. The aptamer and ssDNA were bound with silver nanoparticles by self-assembly of sulfhydryl group at 5′ end to form the apt-AgNPs probe. The apt-AgNPs probe can catalyze the reduction of metallic ions in color agent to generate metal deposition that can be captured both by human eyes and a flatbed scanner. Two different color agents, silver enhancer solution and color agent 1 (10 mM HAuCl₄ + 2 mM hydroquinone) were used to develop silver and gold shell on the surface of AgNPs separately. The results demonstrated that the formation of Ag core–Au shell structure had some advantages especially in the low concentrations. The apt-AgNPs probe coupled with color agent 1 showed remarkable superiority in both sensitivity and detection limit compared to the apt-AuNPs system. The apt-AgNPs system also produced a wider linear range from 1.56 ng mL⁻¹ to 100 ng mL⁻¹ for PDGF-BB with the detection limit lower than 1.56 ng mL⁻¹. The present strategy was applied to the determination of PDGF-BB in 10% serum, and the results showed that it had good specificity in complex biological media.     

Colorimetric detection of potassium ions using aptamer-functionalized gold nanoparticles

Herein, a simple and novel colorimetric method for detection of potassium ions (K⁺) was developed. The colorimetric experiments revealed that upon the addition of K⁺, the conformation of anti-K⁺ aptamer in solution changed from random coil structure to compact rigid G-quadruplex one. This compact rigid G-quadruplex structure could not protect AuNPs against K⁺-induced aggregation, and thus the visible color change from wine-red to blue-purple could be observed by the naked eye. The linear range of the colorimetric aptasensor covered a large variation of K⁺ concentration from 5 nM to 1 μM and the detection limit of 5 nM was obtained. Moreover, this assay was able to detect K⁺ with high selectivity and had great potential applications.     

Rapid and sensitive detection of cholera toxin using gold nanoparticle-based simple colorimetric and dynamic light scattering assay

Herein, a rapid and simple gold nanoparticle based colorimetric and dynamic light scattering (DLS) assay for the sensitive detection of cholera toxin has been developed. The developed assay is based on the distance dependent properties of gold nanoparticles which cause aggregation of antibody-conjugated gold nanoparticles in the presence of cholera toxin resulting discernible color change. This aggregation induced color change caused a red shift in the plasmon band of nanoparticles which was measured by UV–Vis spectroscopy. In addition, we employed DLS assay to monitor the extent of aggregation in the presence of different concentration of cholera toxin. Our assay can visually detect as low as 10 nM of cholera toxin which is lower than the previously reported colorimetric methods. The reported assay is very fast and showed an excellent specificity against other diarrhetic toxins. Moreover, we have demonstrated the feasibility of our method for cholera toxin detection in local lake water.     

Visual detection of melamine in milk products by label-free gold nanoparticles

A simple, rapid, field-portable colorimetric method for the detection of melamine based on melamine-induced color change of label-free gold nanoparticles (Au NPs) was developed in this study. Melamine can induced the aggregation of Au NPs and results in the color change from wine-red to purple, which provided a platform for rapid and field-portable colorimetric detection of melamine. The proposed method can be used to detect melamine in liquid milk and infant formula with a detection limit of 1.0 and 4.2 ppm, respectively, within 30 min by naked eyes observation without the aid of any advanced instrument and the need of any complex pretreatment, and detect as low as 0.15 ppm of melamine in liquid milk and 2.5 ppm of melamine in infant formula with UV-vis-spectroscopy. The proposed method is promising for on-site screening of melamine adulterant in milk products.     

Determination of trace iodide in iodised table salt on silver sulfate-modified carbon paste electrode by differential pulse voltammetry with electrochemical solid phase nano-extraction

Electrochemical solid phase nano-extraction, a novel sample preparation technique, was used for the determination of trace iodide in iodised table salt based on the silver sulfate nanoparticle-modified carbon paste electrode. Electrochemical solid phase nano-extraction was realized in the exchange between the sulfate anion in nanoparticles and an iodide anion from aqueous solution. The released silver cation serves as the electrochemical probe for the determination of iodide. The extraction follows a Freundlich adsorption isotherm, and can be used in the detection of iodide in the concentration range 5.0 × 10⁻¹²-4.0 × 10⁻⁹ M. The amount of iodide in iodised table salt was determined as 0.875 ± 0.002 μg/g, which is about 2.5% of the addition amount of iodate with a relative deviation of 5.92% and a standard addition recovery of 90-110%. The large amounts of chloride and iodate did not interfere with the detection.     

Synthesis of silver nanowires and their applications in the electrochemical detection of halide

A silver nanowires modified platinum (Ag NWs/Pt) electrode was developed for simultaneous and selective determination of chloride, bromide and iodide ions by cyclic voltammetry in aqueous solutions. Silver nanowires were synthesized by an l-cysteine-assisted poly (vinyl pyrrolidone) (PVP)-mediated polyol route. X-ray diffraction (XRD) and scanning electron microscopy (SEM), transmission electron microscopy (TEM) and energy dispersive X-ray spectroscopy (EDS) were employed to investigate the prepared nanowires. The intrinsic high surface area and the fast electron transfer rate ascribed from the nanowire structure could further improve halide detection performance. The determination was based on measurement of the well-separated oxidation peak currents of respective silver halides formed on the surface of silver during an anodic potential sweep. The concentration range was linear from 50 μM to 20.2 mM for bromide and iodide and 200 μM to 20.2 mM for chloride, and the sensitivity was 0.059 μA/mM, 0.042 μA/mM and 0.032 μA/mM for chloride, bromide and iodide, respectively. The correlation coefficient was 0.999 in each case. The Ag NWs/Pt electrode offered a useful platform for the development of a highly sensitive halide sensor.     

Rapid, low level determination of silver(I) in drinking water by colorimetric-solid-phase extraction

A rapid, highly sensitive two-step procedure for the trace analysis of silver(I) is described. The method is based on: (1) the solid-phase extraction (SPE) of silver(I) from a water sample onto a disk impregnated with a silver-selective colorimetric reagent, and (2) the determination of the amount of complexed analyte extracted by the disk by diffuse reflectance spectroscopy (DRS). This method, called colorimetric-solid-phase extraction (C-SPE), was recently shown effective in determining low concentrations (0.1-5.0 mg/ml) of iodine and iodide in drinking water. This report extends C-SPE to the trace (∼4 μg/l) level monitoring of silver(I) which is a biocide used on the International Space Station (ISS). The determination relies on the manually driven passage of a water sample through a polystyrene-divinylbenzene disk that has been impregnated with the colorimetric reagent 5-(p-dimethylaminobenzylidene) rhodanine (DMABR) and with an additive such as a semi-volatile alcohol (1,2-decanediol) or nonionic surfactant (Brij 30). The amount of concentrated silver(I) is then determined in a few seconds by using a hand-held diffuse reflectance spectrometer, with a total sample workup and readout time of ∼60 s. Importantly, the additive induces the uptake of water by the disk, which creates a local environment conducive to silver(I) complexation at an extremely high concentration factor (∼800). There is no detectable reaction between silver(I) and impregnated DMABR in the absence of the additive. This strategy represents an intriguing new dimension for C-SPE in which additives, directly loaded in the disk material, provide a means to manipulate the reactivity of the impregnated reagent.     

Selective determination of melamine in milk samples using 3-mercapto-1-propanesulfonate-modified gold nanoparticles as colorimetric probe

A novel and sensitive colorimetric method for determination of melamine in milk samples was developed by a 3-mercapto-1-propanesulfonate-modified gold nanoparticles (MPS-GNPs) probe. Melamine molecule has multiple -NH₂ groups. These functional groups can interact with MPS to form strong hydrogen bonding and induce the aggregation of the MPS-GNPs, resulting in a dramatic color change from red to blue. Therefore, the concentration of melamine in milk samples can be quantitatively detected by the naked eyes or a UV-vis spectrometer. Moreover, investigations have revealed that the sensitivity of the detection could be clearly improved by adding NaCl to the modified GNPs solution, which leads to a more rapid color change in the NaCl-optimized GNPs system. It is worth noting that the absorption ratio (A₆₅₀/A₅₂₀) of the modified GNPs in the NaCl-optimized system exhibited a linear correlation with melamine concentration and the limit of detection is 8 nM, well below the safety limit (1 ppm for infant formula in China).     

Analyte-induced photoreduction method for visual and colorimetric detection of tyrosine

A new method based on photochemical formation of silver nanoparticles (AgNPs) was developed for detection of tyrosine (Tyr). To selectively detect Tyr and to simplify the detection procedure, the photoactivity of Tyr was utilized to trigger the photochemical reduction in production of AgNPs. The drastic change of solution color caused by the surface plasmon resonance (SPR) absorption band of the formed AgNPs was used to extract the quantitative information of Tyr. This developed method is simple in detection, while both the sensitivity and selectivity are significant improved. Meanwhile, the solution color was changed from colorless to dark yellow after the formation of AgNPs, which allows a much higher sensitivity in visual identification when compared with the SPR band shifting technique commonly, used in conventional colorimetric methods. To optimize the detection system and to understand the mechanism in this proposed method, parameters such as irradiation time, intensity of light source, and the concentration of Tyr were systematically examined. Results indicated that these factors mainly affected the reaction rate of photoreduction. The morphologies of the formed AgNPs were similar, but with small differences in particle sizes. In the examination of selectivity, sixteen other amino acids were examined. Results indicated that only amino acids of tryptophan, cysteine and histidine are photoactive and possess potential interferences in analysis of Tyr. Quantitative studies indicated that a linear response up to 10 μM with a detection limit of 100 nM could be obtained. For visually detection, color change could be observed with a concentration as low as 500 nM of Tyr.     

A colorimetric assay for measuring iodide using Au@Ag core–shell nanoparticles coupled with Cu

Au@Ag core–shell nanoparticles (NPs) were synthesized and coupled with copper ion (Cu²⁺) for the colorimetric sensing of iodide ion (I⁻). This assay relies on the fact that the absorption spectra and the color of metallic core–shell NPs are sensitive to their chemical ingredient and dimensional core-to-shell ratio. When I⁻ was added to the Au@Ag core–shell NPs-Cu²⁺ system/solution, Cu²⁺ can oxidize I⁻ into iodine (I₂), which can further oxidize silver shells to form silver iodide (AgI). The generated Au@AgI core–shell NPs led to color changes from yellow to purple, which was utilized for the colorimetric sensing of I⁻. The assay only took 10 min with a lowest detectable concentration of 0.5 μM, and it exhibited excellent selectivity for I⁻ over other common anions tested. Furthermore, Au@Ag core–shell NPs-Cu²⁺ was embedded into agarose gels as inexpensive and portable “test strips”, which were successfully used for the semi-quantitation of I⁻ in dried kelps.     

Target recycling amplification for label-free and sensitive colorimetric detection of adenosine triphosphate based on un-modified aptamers and DNAzymes

Based on target recycling amplification, the development of a new label-free, simple and sensitive colorimetric detection method for ATP by using un-modified aptamers and DNAzymes is described. The association of the model target molecules (ATP) with the corresponding aptamers of the dsDNA probes leads to the release of the G-quadruplex sequences. The ATP-bound aptamers can be further degraded by Exonuclease III to release ATP, which can again bind the aptamers of the dsDNA probes to initiate the target recycling amplification process. Due to this target recycling amplification, the amount of the released G-quadruplex sequences is significantly enhanced. Subsequently, these G-quadruplex sequences bind hemin to form numerous peroxidase mimicking DNAzymes, which cause substantially intensified color change of the probe solution for highly sensitive colorimetric detection of ATP down to the sub-nanomolar (0.33 nM) level. Our method is highly selective toward ATP against other control molecules and can be performed in one single homogeneous solution, which makes our sensing approach hold great potential for sensitive colorimetric detection of other small molecules and proteins.     

Colorimetric and bare-eye determination of fluoride using gold nanoparticle agglomeration probes

We report on a sensitive detection scheme for fluoride that is based on a quinone-methide-type of rearrangement reaction to trigger a color change among cloaked gold nanoparticle agglomeration probes. Fluoride ions remove silyl moieties from phenol groups on the surface of the probes, and this causes a quinone-methide-type of rearrangement reaction to occur. This is accompanied by the release of a dithiol in a spontaneous and irreversible reaction at room temperature in aqueous medium. The released dithiol causes aggregation of the AuNPs which leads to a color change from pink-red to violet-blue that can easily be seen with bare eyes.. The generation of color by this cascade reactions is only caused by fluoride and not interfered by any other anions. The assay platform developed here offers a sensitive colorimetric assay for fluoride. The lower limit of detection is 120 μM, and the dynamic concentration range is from 120 μM to 1.5 mM.

纳米银比色法检测多巴胺

在银纳米粒子存在下, 多巴胺可还原硝酸银生成银, 导致银纳米粒子粒径增大, 从而使溶液颜色发生改变. 基于此, 提出了一种用于检测多巴胺的纳米银比色法. 随着多巴胺浓度的增大, 溶液的颜色由浅黄色逐渐变为深黄色, 银纳米粒子溶液的吸收峰发生红移且吸光度增大. 在最优实验条件下, 该方法检测多巴胺的线性范围为0.05~16 μmol/L, 检出限为0.04 μmol/L. 该方法操作简单、 灵敏且选择性良好, 可用于人血清中多巴胺的检测.     

Rapid colorimetric sensing of tetracycline antibiotics with in situ growth of gold nanoparticles

A colorimetric assay utilizing the formation of gold nanoparticles was developed to detect tetracycline antibiotics in fluidic samples. Tetracycline antibiotics showed the capability of directly reducing aurate salts into atomic gold which form gold nanoparticles spontaneously under proper conditions. The resulted gold nanoparticles showed characteristic plasmon absorbance at 526 nm, which can be visualized by naked eyes or with a spectrophotometer. UV–vis absorbance of the resulted gold nanoparticles is correlated directly with the concentrations of tetracycline antibiotics in the solution, allowing for quantitative colorimetric detection of tetracycline antibiotics. Reaction conditions, such as pH, temperature, reaction time, and ionic strength were optimized. Sensitivity of the colorimetric assay can be enhanced by the addition of gold nanoparticle seeds, a LOD as low as 20 ng mL⁻¹ can be achieved with the help of seed particles. The colorimetric assay showed minimum interference from ethanol, methanol, urea, glucose, and other antibiotics such as sulfonamides, amino glycosides etc. Validity of the method was also evaluated on urine samples spiked with tetracycline antibiotics. The method provides a broad spectrum detection method for rapid and sensitive detection of reductive substances such as tetracycline antibiotics in liquid and biological samples.     

Silver nanoplates-based colorimetric iodide recognition and sensing using sodium thiosulfate as a sensitizer

A colorimetric method for the recognition and sensing of iodide ions (I⁻) has been developed by utilizing the reactions between triangular silver nanoplates (TAg-NPs) and I⁻ in the presence of sodium thiosulfate (Na₂S₂O₃). Specifically, I⁻ together with Na₂S₂O₃ can induce protection of TAg-NPs owing to the formation of insoluble AgI, as confirmed by the high-resolution transmission electron microscopy (HRTEM). In the absence of Na₂S₂O₃, the etching reactions on TAg-NPs were observed not only by I⁻ but also other halides ions. The Na₂S₂O₃ plays as a sensitizer in this system, which improved the selectivity and sensitivity. The desired colorimetric detection can be achieved by measuring the change of the absorption peak wavelength corresponding to localized surface plasmon resonance (LSPR) with UV–vis spectrophotometer or recognized by naked eye observation. The results show that the shift of the maximum absorption wavelength (Δλ) of the TAg-NPs/Na₂S₂O₃/I⁻ mixture was proportional to the concentration of I⁻ in the range 1.0 × 10⁻⁹–1.0 × 10⁻⁶ mol L⁻¹. Moreover, no other ions besides I⁻ can induce an eye discernible color change as low as 1.0 × 10⁻⁷ mol L⁻¹. Finally, this method was successfully applied for I⁻ determination in kelp samples.     

Ag@Au core/shell triangular nanoplates with dual enzyme-like properties for the colorimetric sensing of glucose

Due to the serious harm of diabetes to human health, development of sensitive assays for glucose level is of high significance for early prevention and treatment of diabetes. Currently, most conventional enzyme-based glucose sensors suffer from high cost and low stability due to the inherent defects of natural enzymes. Herein, we develop a pure nanozyme-based glucose detection method using Ag@Au core/shell triangular nanoplates (TNPs), which combines glucose oxidase (GOD)- and horseradish peroxidase (HRP)-like activities of the Au shell and inherent plasmonic properties of Ag TNPs. The sensing mechanism is based on the fact that the Au shell possessed GOD-like activity, enabling the oxidation of glucose to produce H₂O₂, which can further etch the silver core, leading to the decrease of absorbance at 800 nm and the color change from blue to colorless. Compared with the previous nanozymes-based glucose sensors, our method avoids the use of enzymes and organic chromogenic agent. Moreover, the stability of the Ag@Au core/shell TNPs is much better than that of Ag TNPs due to the protection by the coating of the Au shell. This method was successfully applied to the detection of urine samples from patients with diabetes, indicating its practical applicability for real sample analysis.     

Homogeneous, unmodified gold nanoparticle-based colorimetric assay of hydrogen peroxide

An unmodified gold nanoparticle-based colorimetric assay system in homogeneous format has been developed using hydrogen peroxide (H₂O₂) as a model analyte. H₂O₂ is added to o-phenylenediamine/horseradish peroxidase solution, and allowed to react for 10 min. Then, unmodified gold nanoparticles that serve as “reaction indicators” are added to the reaction solution. The resulting mixture color changes dramatically from red to blue. The reason is that azoaniline, a horseradish peroxidase-catalyzed oxidation product, induces the nanoparticle aggregation. Using this approach, H₂O₂ can be semiquantitatively determined over the concentration range of ∼4 orders of magnitude by the naked eye. If the observed peak intensity at 420 nm is used for the construction of the calibration plot, hydrogen peroxide can be accurately determined down to concentration levels of 1.3 × 10⁻⁶ M. Compared with the conventional electrochemical protocol, this sensing system offers several important advantages: (1) ability to be monitored by the naked eye, (2) avoiding the need of surface modification of electrodes or gold nanoparticles and (3) detection in homogeneous solution. It is worthy of note that this efficient and convenient strategy is also suitable for the detection of other species, such as glucose and cholesterol.     

Target-mediated consecutive endonuclease reactions for specific and sensitive homogeneous fluorescence assay of O-methylguanine-DNA methyltransferase

O⁶-Methylguanine-DNA methyltransferase (MGMT) is one of the most important DNA-repair enzymes. Herein, a simple, sensitive and selective homogeneous fluorescence assay strategy is developed for the detection of MGMT on the basis of target-mediated two consecutive endonuclease reactions. The activity assay of MGMT is firstly accomplished using a hairpin-structured DNA substrate to offer a specific recognition site on the substrate DNA for restriction endonuclease PvuII, and thus to initiate the first endonuclease reaction. The product which activates the second endonuclease reaction allows an efficient amplification approach to create an abundance of fluorescence signal reporters. The first endonuclease reaction offers the method high specificity and the second one furnishes the assay improved sensitivity. The results reveal that the MGMT assay strategy shows dynamic responses in the concentration range from 1 to 120 ng mL⁻¹ with a detection limit of 0.5 ng mL⁻¹. By simply altering the alkylated bases, this strategy can also be extended for the detection of other alkyltransferases. Therefore, the developed strategy might provide an intrinsically convenient, sensitive and specific platform for alkyltransferase activate assay and related biochemical studies due to its label-free, homogeneous, and fluorescence-based detection format.     

Colorimetric detection of iron ions (III) based on the highly sensitive plasmonic response of the N-acetyl-l-cysteine-stabilized silver nanoparticles

We report here a facile colorimetric sensor based on the N-acetyl-l-cysteine (NALC)-stabilized Ag nanoparticles (NALC–Ag NPs) for detection of Fe³⁺ ions in aqueous solution. The Ag NPs with an average diameter of 6.55 ± 1.0 nm are successfully synthesized through a simple method using sodium borohydride as reducing agent and N-acetyl-l-cysteine as protecting ligand. The synthesized silver nanoparticles show a strong surface plasmon resonance (SPR) around 400 nm and the SPR intensity decreases with the increasing of Fe³⁺ concentration in aqueous solution. Based on the linear relationship between SPR intensity and concentration of Fe³⁺ ions, the as-synthesized water-soluble silver nanoparticles can be used for the sensitive and selective detection of Fe³⁺ ions in water with a linear range from 80 nM to 80 μM and a detection limit of 80 nM. On the basis of the experimental results, a new detection mechanism of oxidation–reduction reaction between Ag NPs and Fe³⁺ ions is proposed, which is different from previously reported mechanisms. Moreover, the NALC–Ag NPs could be applied to the detection of Fe³⁺ ions in real environmental water samples.     

Preparation and application of a new glucose sensor based on iodide ion selective electrode

An electrode for glucose has been prepared by using an iodide selective electrode with the glucose oxidase enzyme. The iodide selective electrode used was prepared from 10% TDMAI and PVC according our previous study. The enzyme was immobilized on the iodide electrode by holding it at pH 7 phosphate buffer for 10 min at room temperature. The H₂O₂ formed from the reaction of glucose was determined from the decrease of iodide concentration that was present in the reaction cell. The iodide concentration was followed from the change of potential of iodide selective electrode. The potential change was linear in the 4×10⁻⁴ to 4×10⁻³ M glucose concentration (75-650 mg glucose/100ml blood) range. The slope of the linear portion was about 79 mV per decade change in glucose concentration. Glucose contents of some blood samples were determined with the new electrode and consistency was obtained with a colorimetric method. The effects of pH, iodide concentration, the amount of enzyme immobilized and the operating temperature were studied. No interference of ascorbic acid, uric acid, iron(III) and Cu(II) was observed. Since the iodide electrode used was not an AgI-Ag₂S electrode, there was no interference of common ions such as chloride present in biological fluids. The slope of the electrode did not change for about 65 days when used 3 times a day.