Solution-phase synthesis of ordered mesoporous carbon as resonant-gravimetric sensing material for room-temperature H_2S detection

H_2S can cause multiple diseases and poses a great threat to human health.However,the precise detection of extremely toxic H_2S at room temperature is still a great challenge.Here,a facile solvent evaporation induced aggregating assembly(EIAA) method has been applied for the production of ordered mesoporous carbon(OMCs) in an acidic THF/H_2 O solution with high-molecular-weight poly(ethylene oxide)-b-polystyrene(PEO-b-PS) copolymers as the structure-directing agent,formaldehyde and resorcinol as carbon precursors.Along with the continuous evaporation of THF from the mixed solution,cylindrical micelles are formed in the solution and further assemble into highly ordered mesostructure.The obtained OMCs possesses a two-dimensional(2 D) hexagonal mesostructure with uniform and large pore diameter(～19.2 nm),high surface area(599 m~2/g),and large pore volume(0.92 cm~3/g).When being used as the resonant cantilever gas sensor for room-temperature H_2S detection,the OMCs has delivered not only a superior gas sensing performance with ultrafast re s ponse(14 s) and recovery(21 s) even at low concentration(2 ppm) but also an excellent selectivity toward H_2S among various common interfering gases.Moreover,the limit of detection is better than 0.2 ppm,indicating its potential application in environmental monitoring and health protection.     

Mesoporous carbon amperometric glucose sensors using inexpensive,commercial methacrylate-based binders

Two ordered, soft-templated mesoporous carbon powders with cubic and hexagonal framework structure and four different commercial, low cost methacrylate-based polymer binders with widely varying physical properties are investigated as screen printed electrodes for glucose sensors using glucose oxidase and ferricyanide as the mediator. Both the chemistry and concentration of the binder in the electrode formulation can significantly impact the performance. Poly(hydroxybutyl methacrylate) as the binder provides hydrophilicity to enable transport of species in the aqueous phase to the carbon surface, but yet is sufficiently hydrophobic to provide mechanical robustness to the sensor. The current from the mesoporous carbon electrodes can be more than an order of magnitude greater than for a commercial printed carbon electrode (Zensor) with improved sensitivity for model glucose solutions. Even when applying these sensors to rabbit whole blood, the performance of these glucose sensors compares favorably to a standard commercial glucose meter with the lower detection limit of the mesoporous electrode being approximately 20 mg dL⁻¹ despite the lack of a separation membrane to prevent non-specific events; these results suggest that the small pore sizes and high surface areas associated with ordered mesoporous carbons may effectively decrease some non-specific inferences for electrochemical sensing.     

High surface area, mesoporous, glassy alumina with a controllable pore size by nanocasting from carbon aerogels

A strategy to synthesize amorphous, mesoporous alumina by nanocasting has been developed, involving carbon aerogel as a hard template and aluminum nitrate solution as an alumina precursor. The alumina generated exhibits small, transparent granules with a 3-6 mm diameter and has inherited the three-dimensional network structure of the carbon template. The mesopore surface area of the alumina can be as high as 365 m2 g(-1), and the pore volume reaches 1.55 cm3 g(-1) after calcination at 600 degrees C in air for 8 h. The pore parameters can be varied within a certain range by variation of the carbon aerogel template and the loading amount of the alumina precursor. At high loadings, the obtained glassy alumina clearly has a bimodal pore size distribution in the mesopore range.     

Fabrication of sulfonated mesoporous carbon by evaporation induced self-assembly/carbonization approach and its supercapacitive properties

Synthesis of functionalized mesoporous carbon by an easy-accessed method is of great importance towards its practical applications.Herein,an evaporation induced self-assembly/carbonization(EISAC) method was developed and applied to the synthesis of sulfonic acid group functionalized mesoporous carbon(SMC).The final mesoporous carbon obtained by EISAC method possesses wormlike mesoporous structure,uniform pore size(3.6 nm),large surface area of 735 m²/g,graphitic pore walls and rich sulfonic acid group.Moreover,the resultant mesoporous carbon achieves a superior electrochemical capacitive performances(216 F/g)to phenolic resin derived mesoporous carbon(OMC,152 F/g)and commercial activated carbon(AC,119 F/g).     

Thermal stability of high surface area silicon carbide materials

The synthesis of mesoporous silicon carbide by chemical vapor infiltration of dimethyl dichlorosilane into mesoporous silica SBA-15 and subsequent dissolution of the silica matrix with HF was investigated. The influence of the synthesis parameters of the composite material (SiC/SBA-15) on the final product (mesoporous SiC) was determined. Depending on the preparation conditions, materials with specific surface areas from 410 to 830 m² g⁻¹ and pore sizes between 2 and 10 nm with high mesopore volume (0.31-0.96 cm³ g⁻¹) were prepared. Additionally, the thermal stability of mesoporous silicon carbide at 1573 K in an inert atmosphere (argon) was investigated, and compared to that of SBA-15 and ordered mesoporous carbon (CMK-1). Mesoporous SiC has a much higher thermal textural stability as compared to SBA-15, but a lower stability than ordered mesoporous carbon CMK-1.     

High dispersion Pt nanoparticles using mesoporous carbon support for enhancing conversion efficiency of dye-sensitized solar cells

<正>Mesoporous carbon(MC) with surface area of 380 m~2/g was prepared and employed as the carbon support of Pt catalyst for counter electrode of dye-sensitized solar cells.Pt/MC samples containing 1 wt%Pt were prepared by reducing chloroplatinic acid on MC using wet impregnation.It was found that Pt nanoparticles were uniform in size and highly dispersed on MC supports.The average size of Pt nanoparticles is about 3.4 nm.Pt/MC electrodes were fabricated by coating Pt/MC samples on fluorine-doped tin oxide glass.The overall conversion efficiency of dye-sensitized solar cells with Pt/MC counter electrode is 6.62%,which is higher than that of the cells with conventional Pt counter electrode in the same conditions.     

Preparation of Quercus mongolica leaf-derived porous carbon with a large specific surface area for highly effective removal of dye and antibiotic from water

Quercus mongolica leaf (QL), an easily available biomass, was used as the precursor for preparing the hierarchical porous carbon with a large specific surface area and high adsorption capacities toward the representative dye and antibiotic. After being carbonized, QL was further chemically activated, and potassium hydroxide was proved to be a better activator than sodium hydroxide. The QL-derived porous carbon (PCQL) exhibited abundant micro- and mesopores, and the specific surface area reached 3275 m² g^?1. The performances of PCQL were evaluated through adsorbing rhodamine B (RhB) and tetracycline hydrochloride (TC) from water. Four adsorption isotherm models (the Langmuir, Freundlich, Sips, and Redlich-Peterson models), three adsorption kinetic models (the pseudo-first-order, pseudo-second-order, and intra-particle diffusion models), and the thermodynamic equations were used to investigate the adsorption processes. The pseudo-second-order kinetic model and the Sips isotherm model fitted the experimental data well, which indicates that the adsorption processes were controlled by the amount of adsorption active sites on the surface of PCQL, and these adsorption active sites had different affinities for the adsorbates. The maximum adsorption capacities of PCQL toward RhB and TC were 1946.0 and 1479.6 mg g^?1, respectively, based on the Sips model. The thermodynamic analysis indicates that the adsorption of PCQL toward adsorbents was spontaneous physical processes accompanied by the increasing disorder degree. The adsorption mechanism was attributed to the combination of the pore-filling, hydrogen bond, and π-π interactions. Moreover, in the fixed-bed experiments, the Yoon-Nelson model fitted the breakthrough curves well, and about 8 L wastewater containing RhB (200 mg L^?1) may be effectively treated by 1.0 g of PCQL. Above results indicate that QL is a promising precursor for preparing functional porous carbon materials.     

Preparation of activated carbon with high surface area for high-capacity methane storage

Activated carbon （AC） was fabricated from corncob, which is cheap and abundant. Experimental parameters such as particle size of corncob, KOHlchar weight ratio, and activation temperature and time were optimized to generate AC, which shows high methane sorption capacity. AC has high specific surface area （3227 m^2/g）, with pore volume and pore size distribution equal to 1.829 cm^3/g and ca. 1.7-2.2 nm, respectively. Under the condition of 2℃ and less than 7.8 MPa, methane sorption in the presence of water （Rw = 1.4） was as high as 43.7 wt% methane per unit mass of dry AC. The result is significantly higher than those of coconut-derived AC （32 wt%） and ordered mesoporous carbon （41.2 wt%, Rw = 4.07） under the same condition. The physical properties and amorphous chaotic structure of AC were characterized by N2 adsorption isotherms, XRD, SEM and HRTEM. Hence, the corncob-derived AC can be considered as a competitive methane-storage material for vehicles, which are run by natural gas.

Key words     

Simultaneous determination of nitroaromatic compounds in water using capillary electrophoresis with amperometric detection on an electrode modified with a mesoporous nano‐structured carbon material

In this article, a carbon disk electrode modified with mesoporous carbon material (CMK‐3) was used in CE with amperometric detection system for the simultaneous determination of four types of important nitroaromatic compounds, including 2,4,6‐trinitrotoluene (TNT), 1,3,5‐trinitrobenzene (TNB), 2,4‐dinitrotoluene (DNT) and 1,3‐dinitrobenzene (DNB). Compared with the bare carbon electrode, the CMK‐3 modified electrode greatly improved the sensitivity at a relatively positive detection potential due to its excellent electrocatalytic activities, high conductivity and large effective surface area. The four analytes could be well separated and detected within 480 s. A good linear response was obtained for TNB, DNB, TNT and DNT from 8.4 to 5.0×10³ μg/L, with correlation coefficients higher than 0.9992. And the detection limits were established between 3.0 and 4.7 μg/L for the four investigated nitroaromatic compounds (S/N=3). The CMK‐3‐modified electrode was successfully employed to analyze coking wastewater, tap water and river samples with recoveries in the range of 94.8–109.0%, and RSDs less than 5.0%. The presented results demonstrated that the CMK‐3‐modified carbon electrode used in CE with amperometric detection was of convenient preparation, high sensitivity and good repeatability, which could be employed in the rapid determination of practical samples.     

One-step synthesis of biomass derived O,N-codoped hierarchical porous carbon with high surface area for supercapacitors

We report a convenient method to synthesize O, N-codoped hierarchical porous carbon by one-step carbonization of the mixture of KHCO₃, urea and alginic acid. Benefiting from KHCO₃ and urea synergistic effect, the obtained O, N-codoped hierarchical porous carbon (NPC-700) material has a well-developed interconnected porous framework with ultrahigh specific surface area (2846 m²/g) and massive heteroatoms functional groups. Consequence, such porous carbon displays high specific capacitance (324 F/g at 1 A/g), excellent rate performance (212 F/g at 30 A/g) and good electrochemical stabilization in 6 mol/L KOH solution. More importantly, the assembled NPC-700//NPC-700 symmetrical supercapacitor can achieve a high energy density of 18.8 Wh/kg and good electrochemical stabilization in 1 mol/L Na₂SO₄ solution. This process opens up a new way to design heteroatoms-doped hierarchical porous carbon derived from biomass materials for supercapacitors.     

Development of mesoporous TiO2 microspheres with high specific surface area for selective enrichment of phosphopeptides by mass spectrometric analysis

In this study, mesoporous TiO₂ microspheres were synthesized by simple hydrothermal reaction, and successfully developed for phosphopeptides enrichment from both standard protein digestion and real biological sample such as rat brain tissue extract. The mesoporous TiO₂ microspheres (the diameter size of about 1.0 μm) obtained by simple hydrothermal method were found to have a specific surface area of 84.98 m²/g, which is much larger than smooth TiO₂ microspheres with same size. The surface area of mesoporous TiO₂ microspheres is almost two times of commercial TiO₂ nanoparticle (a diameter of 90 nm). Using standard proteins digestion and real biological samples, the superior selectivity and capacity of mesoporous TiO₂ microspheres for the enrichment of phosphorylated peptides than that of commercial TiO₂ nanoparticles and TiO₂ microspheres was also observed. It has been demonstrated that mesoporous TiO₂ microspheres have powerful potential for selective enrichment of phosphorylated peptides. Moreover, the preparation of the mesoporous TiO₂ microspheres obtained by the hydrothermal reaction is easy, simple and low-cost. These mesoporous TiO₂ microspheres with the ability of large scale synthesis can widely be applied for phosphorylated proteomic research.     

Synthesis of activated carbon foams with high specific surface area using polyurethane elastomer templates for effective removal of methylene blue

Carbon foams have gained significant attention due to their tuneable properties that enable a wide range of applications including catalysis, energy storage and wastewater treatment. Novel synthesis pathways enable novel applications via yielding complex, hierarchical material structure. In this work, activated carbon foams (ACFs) were produced from waste polyurethane elastomer templates using different synthesis pathways, including a novel one-step method. Uniquely, the produced foams exhibited complex structure and contained carbon microspheres. The ACFs were synthesized by impregnating the elastomers in an acidified sucrose solution followed by direct activation using CO₂ at 1000 ℃. Different pyrolysis and activation conditions were investigated. The ACFs were characterized by a high specific surface area (S_BET) of 2172 m²/g and an enhanced pore volume of 1.08 cm³/g. Computer tomography and morphological studies revealed an inhomogeneous porous structure and the presence of numerous carbon spheres of varying sizes embedded in the porous network of the three-dimensional carbon foam. X-ray diffraction (XRD) and Raman spectroscopy indicated that the obtained carbon foam was amorphous and of turbostratic structure. Moreover, the activation process enhanced the surface of the carbon foam, making it more hydrophilic via altering pore size distribution and introducing oxygen functional groups. In equilibrium, the adsorption of methylene blue on ACF followed the Langmuir isotherm model with a maximum adsorption capacity of 592 mg/g. Based on these results, the produced ACFs have potential applications as adsorbents, catalyst support and electrode material in energy storage systems.     

Comparative analysis of enzymatically digested kappa-carrageenans, using liquid chromatography on ion-exchange and porous graphitic carbon columns coupled to an evaporative light scattering detector

Enzymatically digested kappa (A-G4S)-carrageenans, apart from their biological activities in plants, could be used as 'model' molecules to elucidate potential problems in nuclear magnetic resonance spectroscopy of carrageenans. Thus, oligosaccharides obtained from kappa-carrageenan by enzymatic digestion using kappa-carrageenase have been separated on silica and polymeric based ion-exchange and porous graphitic carbon (PGC) columns, coupled to an evaporative light scattering detector. Oligomers were separated on ion-exchange columns using a gradient of ammonium acetate as a developing ion, while analysis on PGC column presented an additional adjacent peak next to each main one, using a gradient of ammonium acetate in water/acetonitrile as a mobile phase. The phenomenon can be attributed to different retention mechanisms that govern the PGC surface. Furthermore, it has been demonstrated that acetonitrile can regulate the selectivity between the peaks raising hopes for preparative chromatography.     

Speciation,adsorption and determination of chromium(III) and chromium(VI) on a mesoporous surface imprinted polymer adsorbent by combining inductively coupled plasma atomic emission spectrometry and UV spectrophotometry

In the present study, a Cr(III)‐imprinted polymer (Cr(III)‐IIP) was prepared by an easy one‐step sol–gel reaction with a surface imprinting technique on the support of silica mesoporous material. A new SPE method for the speciation, separation, preconcentration, and determination of Cr(III) and Cr(VI) by inductively coupled plasma atomic emission spectrometry and UV on the mesoporous‐imprinted polymer adsorbent was developed. The structure of the imprinted polymer was characterized by Fourier transform infrared spectroscopy, X‐ray powder diffraction, transmission electron microscopy, and nitrogen adsorption–desorption isotherms. The adsorption kinetics, thermodynamics behavior, and recognition ability toward Cr(III) on Cr(III)‐IIP and nonimprinted polymer were compared. The results showed that Cr(III)‐IIP had higher selectivity and nearly a two times larger Langmuir adsorption capacity (38.50 mg/g) than that of NIP. The proposed method has been successfully applied in the determination and speciation of chromium in natural water samples with satisfactory results.     

Discussion of thermodynamic data obtained by adsorption gas chromatography of hydrocarbons on a new graphitized carbon black with a high specific surface area

Summary A new graphitized carbon black (Carbograph 5) with a specific surface area (560 m² g⁻¹) greater than those of commerically available graphitized carbons was studied by gas chromatography to determine the enthalpy, entropy, and free energy of adsorption of a series of alkanes (C₂−C₆). The adsorption properties were also investigated by considering changes in the isosteric heats and entropies of adsorption when a nonpolar stationary phase (squalane) was added to the adsorbent. The data obtained are discussed and compared with literature values for other graphitized carbon blacks.     

Simultaneous electrochemical sensing of ascorbic acid,dopamine and uric acid at anodized nanocrystalline graphite-like pyrolytic carbon film electrode

Nanocrystalline graphite-like pyrolytic carbon film (PCF) electrode fabricated by a non-catalytic chemical vapor deposition (CVD) process was used for the simultaneous electrochemical sensing of ascorbic acid (AA), dopamine (DA), and uric acid (UA). The electrode was studied with respect to changes in electrocatalytic activity caused by a simple and fast electrochemical pretreatment. The anodized electrode exhibited excellent performance compared to many chemically modified electrodes in terms of detection limit, linear dynamic range, and sensitivity. Differential pulse voltammetry (DPV) was used for the simultaneous determination of ternary mixtures of DA, AA, and UA. Under optimum conditions, the detection limits were 2.9 μM for AA, 0.04 μM for DA, and 0.03 μM for UA with sensitivities of 0.078, 5.345, and 6.192 A M⁻¹, respectively. The peak separation was 219 mV between AA and DA and 150 mV between DA and UA. No electrode fouling was observed and good reproducibility was obtained in all the experiments. The sensor was successfully applied for the assay of DA in an injectable drug and UA in human urine by using standard addition method.     

Analysis of methyldopa in the presence of phenylephrine using electrocatalytic effect of a ferrocene derivative at a surface of feather like La3+/ZnO nano‐flowers modified carbon paste electrode

The purpose of the present study was to introduce a newly designed approach for simultaneous determination of methyldopa and phenylephrine using modified carbon paste electrode with feather like La³⁺/ZnO nano‐flowers and N‐(ferrocenylmethylidene) fluoren‐2‐amine (La³⁺/ZnONFMF2ACPE). According to the results from the electrochemical experiments, oxidation current of methyldopa on the modified electrode surface was incremented and its oxidation occurred at a potential about 110 mV less positive than that of an unmodified carbon paste electrode. A linear response was observed for the electrode at different methyldopa concentrations (0.2 to 500.0 μM). The existence of phenylephrine did not induce any change in the modified electrode sensitivity to methyldopa, indicating that they could be measured simultaneously or independently. Real human body samples were used to test our technique efficacy in detecting methyldopa and phenylephrine.     

Phase equilibria of the ternary system vinyl acetate/(R,S)-1-phenylethanol/carbon dioxide at high pressure conditions

Phase equilibrium measurements, correlations and predictions are presented for the binary systems (R,S)-1-phenylethanol/CO₂ and vinyl acetate/CO₂ and for the ternary system vinyl acetate/(R,S)-1-phenylethanol/CO₂. Experiments for the ternary system were performed in the temperature range of 323–343 K and in the pressure range of 7–12 MPa, using a high pressure phase equilibrium apparatus with a high pressure visual variable volume cell. Phase compositions were determined by taking samples of each phase and analysing them by gas chromatography. Equilibrium data were correlated with the Peng–Robinson equation of state combined with the Mathias–Klotz–Prausnitz mixing rule. A good correlation of both phases behaviour was obtained with an average absolute deviation (AAD) of 6.80%. Predictions for the binary sub-systems and for the ternary system were performed using the Peng–Robinson and the Soave–Redlich–Kwong equation of state, with the predictive mixing rule MHV1.