Multiple proton ionizable calixarene derivatives with different ring sizes and complexation ability as efficient ionophores for complexation and solvent extraction of trivalent indium

The solvent extraction behavior of multiple proton ionizable p-tert-butylcalix[4]arene and [6]arene carboxylic acid derivatives towards indium has been investigated along with an acyclic monomeric analogue from weakly acidic media into chloroform. The extraction mechanism is ion exchange and carboxylic acid groups are adequate ligating sites for extraction. The cyclic structure of calixarene ligands to accommodate the potential guest species and the cooperativity effect of multifunctional groups significantly affect the complexation behavior and calixarene derivatives are found to be excellent extractants over the monomeric analogue. The composition of the extracted complex depends on the solution pH and attempts to determine the composition of the extracted complex for the extraction of indium have been stymied by complications arising from the formation of polynuclear species of indium and bridged polymeric species of calixarene carboxylic acid derivatives. One mole of calix[4]arene derivative extracts 2.5 moles of indium whereas the calix[6]arene derivative tends to extract 4.0 moles of indium. The loaded indium is back extracted with 1 mol dm(-3) hydrochloric acid solution. Though quantitative back extraction of indium was achieved from the fully loaded calix[6]arene derivative, it was only achieved up to 85% in the case of the calix[4]arene derivative.     

Supramolecular stabilization of hydroxylamine TEMPOH by complexation with an amphiphilic calixarene

In an ethanol/water mixture, the nitroxyl radical TEMPO abstracts a hydrogen atom from a phenolic OH group of the amphiphilic para-hexanoylcalix[4]arene, and the hydroxylamine TEMPOH formed yields a stable inclusion complex with another molecule of the calixarene.     

New efficient calixarene amide ionophores for the selective removal of strontium ion from nuclear waste: synthesis, complexation, and extraction properties.

Three novel lower rim hexamide derivatives 5(6), 7(6), and 9(6) of p-hydroxycalix[6]arene and four octamides 5(8), 7(8)-9(8) derived from the corresponding p-hydroxycalix[8]arene were synthesized, and their potential as extractants in radioactive waste treatment was evaluated, in comparison with upper rim analogues 12(6) and 12(8) and other existing selective neutral ionophores currently used in radioactive waste treatment. Extraction of alkali and alkaline earth metal picrates from water to dichloromethane, and of the corresponding nitrates from acidic water solution simulating radioactive waste, to 2-nitrophenyl hexyl ether (NPHE), showed that the lower rim amides extract divalent cations much better than monovalent ones. The upper rim hexa-12(6) and octamide 12(8) are very inefficient ligands, hardly extracting any cation. In all cases, p-alkoxy octamides are more efficient and selective extractants than the corresponding hexamides. In the case of simulated waste solutions, the distribution coefficients for strontium removal by octamides (6.5 < D(Sr) < 30) are much higher than the corresponding value (D(Sr)) found for dicyclohexyl-18-crown-6 (DC18C6), and the same applies for the strontium/sodium selectivity, which is 6500 < D(Sr)/D(Na) < 30 000 for octamides and 47 for DC18C6. ESI-MS, UV-vis, and X-ray crystal structure studies give consistent results and indicate the formation of 2:1 (cation/ligand) strontium complexes for all octamides tested. Stability constants were determined in homogeneous methanol solution for alkali metal (log beta(11) < or = 2), calcium (4.3 < or = log beta(11) < or = 6.0; 9.4 < or = log beta(21) < or = 12.0), and strontium (5.6 < or = log beta(11) < or = 12.3) ions using a UV-vis competition method with 1-(2-pyridylazo)-2-naphthol (PAN). They confirm the high efficiency and high divalent/monovalent selectivity found in metal ion extraction experiments for the new octamide ligands. Evidence for a positive cooperative effect between the two metal ion binding sites was obtained in the case of the Ca(2+) complex of octamide 1(8).     

水溶性杯芳烃对染料客体分子的包结配位作用

研究了水溶性的杯[n]芳烃磺酸盐(n=4,6,8)及杯[6]芳烃磺酸盐的烷基化衍生物在25.0℃对几种染料客体分子的包结配位作用,发现杯[n]芳烃磺酸盐均使客体的荧光强度降低,而在其下缘的烷基化衍生物却使客体的荧光强度增强,从光物理行为对这些结果进行了解释。由荧光光谱分光光度滴定技术确定了25.0℃时所形成配合物的稳定常数,讨论了其分子识别性质。     

Dissociation and complexation constants of some β-diketone ionophores

The dissociation constants of dibenzoylmethane (DBM), 1-phenyl-3-(p-chlorophenyl)-1,3-propanedion (ETH 245) and 1,13-bis-[4-(3-phenyl-1,3-dioxopropyl)-phenyl]-tridecan (ETH 1224) were potentiometrically evaluated in 80% dioxane medium at 30 °C. The stability constants of DBM complexes with calcium, magnesium and barium as well as those of ETH 245 with magnesium were determined and correlated with the selectivity coefficients of ion-selective electrodes containing DBM as ionophore.     

Energetics of small molecule and water complexation in hydrophobic calixarene cavities

Calixarenes grafted on silica are energetically uniform hosts that bind aromatic guests with 1:1 stoichiometry, as shown by binding energies that depend upon the calixarene upper rim composition but not on their grafted surface density (0.02-0.23 nm(-2)). These materials are unique in maintaining a hydrophilic silica surface, as probed by H2O physisorption measurements, while possessing a high density of hydrophobic binding sites that are orthogonal to the silica surface below them. The covalently enforced cone-shaped cavities and complete accessibility of these rigidly grafted calixarenes allow the first unambiguous measurements of the thermodynamics of guest interaction with the same calixarene cavities in aqueous solution and vapor phase. Similar to adsorption into nonpolar protein cavities, adsorption into these hydrophobic cavities from aqueous solution is enthalpy-driven, which is in contrast to entropy-driven adsorption into water-soluble hydrophobic hosts such as beta cyclodextrin. The adsorption thermodynamics of several substituted aromatics from vapor and liquid are compared by (i) describing guest chemical potentials relative to pure guest, which removes differences among guests because of aqueous solvation and van der Waals contacts in the pure condensed phase, and (ii) passivating residual guest binding sites on exposed silica, titrated by water during adsorption from aqueous solution, using inorganic salts before vapor adsorption. Adsorption isotherms depend only upon the saturation vapor pressure of each guest, indicating that guest binding from aqueous or vapor media is controlled by van der Waals contacts with hydrophobic calixarene cavities acting as covalently assembled condensation nuclei, without apparent contributions from CH-pi or other directional interactions. These data also provide the first direct quantification of free energies for interactions of water with the calixarene cavity interior. The calixarene-water interface is stabilized by approximately 20 kJ/mol relative to the water-vapor interface, indicating that water significantly competes with the aromatic guests for adsorption at these ostensibly hydrophobic cavities. This result is useful for understanding models of water interactions with other concave hydrophobic surfaces, including those commonly observed within proteins.     

Thermodynamics of alkali metal cation complexation by ionised calixcrown ligands

Binding of alkali metal cations (AMCs) by 1,3-alternate, ionised calix[4]arene-benzocrown-6 ligands was investigated by isothermal calorimetric titration in methanol. The groups of –C(O)NHSO₂CH₃ and more acidic –C(O)NHSO₂CF₃ were attached to the 1,3-alternate calix[4]arene-benzocrown-6 skeleton in two locations. In one series, the acidic group was attached to the para position of one aromatic ring in the calixarene framework, thereby positioning it over the polyether cavity. In the other series, the ionisable group was a substituent on the benzo group in the polyether ring. This oriented the acidic group away from the crown ether cavity. For these calixcrown ligands, the effects of the location of the ionisable group and its acidity and the identity of the AMC on the binding constant, enthalpy and entropy of complexation are assessed.     

Calcium cation complexation by lariat ether receptors having arene-terminated sidearms

The first reported calcium azalariat complex has an arene terminated sidearm that behaves differently from an otherwise identical indole-sidearmed complex; twin phenolic sidearms on a diaza-18-crown-6 lead to an infinite, H-bonded network.     

Synthesis and cation complexation properties of new macrolides

The cis-2-alkyl-3-oxy-tetrahydropyran unit as a novel structure for the design and synthesis of a new type of ionophores with C₂-symmetry is reported. The synthesis of seven different macrolides and a crown ether and their cation complexation properties were investigated. The X-ray crystal structure of some of the receptors provides valuable information on the preferred conformation of tetrahydropyrans in the solid state that can be related to the cation complexation properties in solution. The kinetic template effect has been proved to be a useful tool to improve the yield and selectivity in the synthesis of macrodiolide 3.     

Survey on thermodynamic properties for the complexation behaviour of some calixarene and cucurbituril receptors

Some aspects of the complex formation reaction between amino acids, short peptides, and nucleobases with calixarenes and cucurbiturils in solution are presented. A brief survey of their stability constants, enthalpies, and entropies data obtained by different techniques in various solvents is reported, along with the ability of these receptors to be employed as carriers through liquid membrane in view of separating biological compounds.     

Chiroptical switching of molecular universal joint triggered by complexation/release of a cation: A stepwise synergistic complexation

Pillar[5]arene-based molecular universal joints(MUJs), bearing fused crown ether subring(MUJ1 and MUJ3) or a ring without ether oxygen atom(MUJ2), were synthesized and enantio–differentiated. Significant chiral inversion was observed for the crown ether-fused MUJs upon the addition of equivalent cations Na+, showing an anisotropy(g) factor of 0.014, while alkyl subring-fused MUJ2 showed no CD inversions. Unprecedentedly, sodium ion triggered rolling-in motion of the subring to the pillar[5]arene...     

Photoswitching of cation complexation with A monoaza-crown dithienylethene photochrome

A photochromic dithienylethene, bearing a phenyl azacrown as an ionophore and a formyl group as an electron-accepting substituent, changes its binding ability for Ca2+ by a factor higher than 103 by photoirradiation. This new photoionochromic displays a wavelength-dependent competition between fluorescence and photocyclization assigned to a red-shifted absorption of the fluorescing conformer compared to the absorption of the photoreactive conformer.     

Synthesis and trivalent lanthanide ion complexation studies of new macrocyclic receptors based lactam ionophores

This study is the first report on the design, synthesis and photophysical properties of three new macrocyclic receptors based receptors containing two amide bridges. Their binding properties towards trivalent lanthanide ions such as La³⁺, Gd³⁺, Tb³⁺, Dy³⁺, Er³⁺ and Yb³⁺ were investigated by using spectroscopic techniques. With respect to emission intensity changes upon trivalent lanthanide ion complexation, macrocyclic receptors based lactam ionophores showed higher selectivity towards Yb³⁺ and/or Er³⁺ ion over other ions. Presence of proximal two amide groups in macrocyclic lactam receptors having different cavity size were observed to play an important role in exhibiting its lanthanide ion binding.     

Comparative study of 2-hydroxy propyl beta cyclodextrin and calixarene as ionophores in potentiometric ion-selective electrodes for neostigmine bromide

Three novel neostigmine bromide (NEO) selective electrodes were investigated with 2-nitrophenyl octyl ether as a plasticiser in a polymeric matrix of polyvinyl chloride (PVC). Sensor 1 was fabricated using tetrakis(4-chlorophenyl)borate (TpClPB) as an anionic exchanger without incorporation of an ionophore. Sensor 2 used 2-hydroxy propyl β-cyclodextrin as an ionophore while sensor 3 was constructed using 4-sulfocalix-8-arene as an ionophore. Linear responses of NEO within the concentration ranges of 10⁻⁵ to 10⁻², 10⁻⁶ to 10⁻² and 10⁻⁷ to 10⁻² mol L⁻¹ were obtained using sensors 1, 2 and 3, respectively. Nernstian slopes of 51.6 ± 0.8, 52.9 ± 0.6 and 58.6 ± 0.4 mV/decade over the pH range of 4-9 were observed. The selectivity coefficients of the developed sensors indicated excellent selectivity for NEO. The utility of 2-hydroxy propyl β-cyclodextrin and 4-sulfocalix[8]arene as ionophores had a significant influence on increasing the membrane sensitivity and selectivity of sensors 2 and 3 compared to sensor 1. The proposed sensors displayed useful analytical characteristics for the determination of NEO in bulk powder, different pharmaceutical formulations, and biological fluids (plasma and cerebrospinal fluid (CSF)) and in the presence of its degradation product (3-hydroxyphenyltrimethyl ammonium bromide) and thus could be used for stability-indicating methods.     

Electronic states of ketene radical cation

The doublet electronic states of ketene, and ketene-d₂, radical cations produced by photoionisation with Helα (58.4 nm) and Hellα (30.4 nm) radiation, were studied by photoelectron spectroscopy. Seven such states were found below 28 eV ionisation energy and were assigned by comparison with the ionisation energies calculated by the correlated PNO-CEPA approach. The agreement is within ≈ 0.3 eV of the experimental data. An analysis of the contributions of reorganisation and correlation effects to the calculated ionisation energies is presented. The vibrational frequencies exciteα in four of the states of ketene-d₂ and ketene are presented and discussed in view of the assignments.     

Tripodal lipophilic ionophores: synthesis, cation binding and transport through liquid membranes

New C₃-symmetric lipophilic tripodal ionophores, Et(CH₂OCH₂COR)₃; R=NMePh (1), R=NEtPh (2), R=piperidyl (3), have been prepared and their binding abilities for alkali and alkaline earth metal cations evaluated by extraction equilibrium and cation transport through bulk liquid membranes. Experiments show that these ionophores have considerable potential for transporting lithium, sodium and calcium ions relative to potassium and magnesium ions. The cation transport rates by ionophores 1 and 2 decrease in the order Li⁺>Na⁺>Ca²⁺>Ba²⁺>K⁺>Mg²⁺, and the selectivities of Li⁺/K⁺, Na⁺/K⁺ and Ca²⁺/Mg²⁺ are 6.47–7.24, 6.05–6.19 and 9.39–16.13, respectively. The extraction selectivity sequences of the ionophores 1 and 2 are in agreement with the descending order of the cation transport rate, and the complexation constants in chloroform phase were estimated.     

Synthesis of cage-type molecules with pi-cavity and selective gas-phase cation complexation

[structure: see text] Cage-type molecules composed of phenyl walls and caps were synthesized as hosts for the binding of ammonium and alkali metal cations through cation-pi interactions. The synthesis involved a key cyclization step, which was markedly dependent on the capping component. Binding studies by electrospray ionization mass spectrometry toward lithium, sodium, potassium, and ammonium cations showed that the cage-type molecules selectively form a 1:1 complex. A competitive binding study showed that cage 3c (R = Et, R' = OMe) has a preference toward lithium cation while cage 4b (R = Me, R' = OMe) has a similar preference toward both lithium and ammonium ion in the presence of others. This selectivity pattern was tentatively explained by the gate size of the cage-type compounds, not by their cavity size.