Synthesis,characterization, molecular modeling,and DNA interaction studies of a Cu(II) complex containing drug of chronic hepatitis B: adefovir dipivoxil

A new copper(II) complex [Cu(adefovir)₂Cl₂], where adefovir = adefovir dipivoxil drug, was synthesized and characterized by using different physicochemical methods. Binding interaction of this complex with calf thymus DNA (ct-DNA) has been investigated by multi-spectroscopic techniques and molecular modeling study. The complex displays significant binding properties of ct-DNA. The results of fluorescence and UV–vis absorption spectroscopy indicated that, this complex interacted with ct-DNA in a groove-binding mode, and the binding constant was 4.3(±0.2) × 10⁴ M^?1. The fluorimeteric studies showed that the reaction between the complex and ct-DNA is exothermic (ΔH = 73.91 kJ M^?1; ΔS = 357.83 J M^?1 K^?1). Furthermore, the complex induces detectable changes in the CD spectrum of ct-DNA and slightly increases its viscosity which verified the groove-binding mode. The molecular modeling results illustrated that the complex strongly binds to the groove of DNA by relative binding energy of the docked structure ?5.74 kcal M^?1. All experimental and molecular modeling results showed that the Cu(II) complex binds to DNA by a groove-binding mode.     

A new nano-composite electrode as a copper (II) selective potentiometric sensor

A macrocyclic ligand “7,10,13-triaza-1-thia-4,16-dioxa-20,24-dimethyl-2,3;17,18-dibenzo-cyclooctadecane-6,14-dione” as an efficient ionophore was used into a new Cu²⁺ nano-composite potentiometric carbon paste sensor containing multi-walled carbon nanotubes (MWCNTs), nanosilica particles, and room temperature ionic liquid (1-butyl-1-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide, [BMP]Tf₂N). This potentiometric sensor responds to copper ions in a wide linear dynamic range of 4.50 × 10^?8 to 1.00 × 10^?2 mol L^?1 with Nernstian slope of 29.64 ± 0.10 mV per decade. The detection limit of 2.34 × 10^?8 mol L^?1 was obtained at the pH range 3.5–6.0. It has a fast response with response time of about 10 s, and can be used for at least 16 weeks without any considerable divergence in the potentials. The suggested sensor thus allows sensitive, selective, simple, low cost, and stable electrochemical sensing of Cu²⁺ ions in the presence of a large number of alkali, alkaline earth, transition and heavy metal ions. This sensor was successfully applied in the determination of copper ions in water and waste water samples.     

Synthesis of nucleobase-calix[4]arenes via click chemistry and evaluation of their complexation with alkali metal ions and molecular assembly

In this study, calix[4]arene derivatives (11–14) bearing a single nucleobase (adenine, thymine, cytosine or guanine) were synthesised via click chemistry. The complexation ability of the synthesised derivatives with alkali metal ions was measured using MALDI-TOF mass spectrometry, and their molecular assembly in CDCl₃ was determined using ¹H NMR. Calix[4]arene derivatives (11–14) formed 1:1 complexes with all alkali metal ions and the rank order for the complexation selectivity was Rb⁺ > Cs⁺ > K⁺ ? Na⁺ > Li⁺. The attachment of nucleobase at the upper rim of calix[4]arene had little effect on its complexation selectivity for alkali metal ions. Thymine-, adenine- and guanine-calix[4]arenes formed self-assembled structures in CDCl₃ via base–base interactions. In addition, adenine-calix[4]arene (11) bound to thymine-calix[4]arene (12) to form a discrete species via Hoogsteen hydrogen bonding.     

Used a new aza-thia-macrocycle as a suitable carrier in potentiometric sensor of copper (II)

A new modified carbon paste electrode for determination of Cu²⁺ made in our laboratory that used a new synthesized macrocycle 7,16-diaza-1-thia-4,10,13,19-tetraoxa-6,17-dioxo-2,3;20,21-dinaphtho-cyclouneicosane as modifier. This sensor exhibits a good affinity toward copper (II) ions over a wide variety of other metal ions. The electrode exhibits a Nernstian slope of 30 (±0.5) mV per decade for copper (II) ions over a wide concentration range (1.0 × 10^?8–1.0 × 10^?2 mol L^?1), with a limit of detection of 7.0 × 10^?9 mol L^?1 (~0.45 ppb). It has a response time of 30 s and can be used for at least 3 months without any considerable divergence in responses. The potentiometric response of the electrode is independent of the pH of test solution in the pH range 3.5–7.5. Finally, it was successfully used as an indicator electrode for determination of copper (II) in real samples such as Karoun river and tap water.     

Preconcentration of Trace Cadmium (II) and Copper (II) in Environmental Water Using a Column Packed with Modified Silica Gel-Chitosan Prior to Flame Atomic Absorption Spectrometry Determination

A new column loaded with modified silica gel-chitosan is proposed as a preconcentration system for adsorption of trace cadmium (II) and copper (II). The optimization steps were performed under dynamic conditions, involving pH, sample flow rate, eluent selection, concentration, volume, and flow rate. Trace Cd(II) and Cu(II) were quantitatively adsorbed by the modified silica gel-chitosan. The metal ions adsorbed on the separation column were eluted with 0.1 M HNO₃ and determined by flame atomic absorption spectrometry. Under the optimum conditions, this method allowed the determination of cadmium and copper with limits of detection (LOD) of 20 ng L^?1 and 38 ng L^?1, respectively. The relative standard deviation values (RSDs) for 1.0 mg L^?1 of cadmium and 1.0 mg L^?1 of copper were 2.62% and 2.85%, respectively.     

New Copper(II) Ion-Selective Membrane Electrode Based on Erythromycin Ethyl Succinate as a Neutral Ionophore

Abstract

The potentiometric response characteristics of a new copper(II) ion-selective PVC membrane electrode based on erythromycin ethyl succinate (EES) as ionophore were investigated. The electrode exhibited a Nernstian response to Cu²⁺ ions over the activity range of 1.5 × 10^?2 to 2.0 × 10^?6 mol L^?1 with a limit of detection of 6.3 × 10^?7 mol L^?1. Stable potentials were obtained in the pH range of 5.5–6.5. The potentiometric selectivity coefficients were calculated by using fixed interference method and revealed no important interferences except for Ag⁺. This electrode was successfully applied as an indicator electrode in determination of copper ions in real water samples.     

Chemical separation of enriched cadmium target from copper backing in cyclotron production of radioisotope 111In

A radiochemical purification procedure was developed for the separation of enriched cadmium (¹¹¹Cd and ¹¹²Cd) from natural copper that used as backing; and was based upon the chromatographic adsorption. The separation of copper from cadmium was studied in this work. The ions were selectively separated from aqueous solution. Ion-exchange chromatography was employed as a column (1.5 cm i.d. and 15 cm length) with AG1-X8 resin (chloride form, 100–200 mesh) and a flow rate of 1–2 ml/min throughout the separation. 6 M HCl media was used for the adsorption of Cd and Cu on the resin. Then, Cu was eluted by 2 M HCl and Cd by 100 ml 0.5 M HNO₃. The amount of Cu and Cd ions in the final solution (0.5 M HNO₃) were measured by pulse polarographic method and the concentration of Cu was found to be <0.1 ppm. The Cd was quantitatively recovered and the recovery yield from ion-exchange chromatography was greater than 96 %.     

Crystal structures and in vitro anticancer studies on new unsymmetrical copper(II) Schiff base complexes derived from meso-1,2-diphenyl-1,2-ethylenediamine: a comparison with related symmetrical ones

Two new unsymmetrical copper(II) Schiff base complexes, [CuLⁿ(py)]ClO₄ (n = 1, 2) in which Lⁿ represents a tridentate N₂O type Schiff base ligand, were synthesized. Lⁿs were derived from monocondensation of meso-1,2-diphenyl-1,2-ethylenediamine with salicylaldehyde or 3-methoxysalicylaldehyde. The reaction between [CuLⁿ(py)]ClO₄ and other salicylaldehyde derivatives resulted in new N₂O₂ unsymmetrical tetradentate Cu^II complexes, CuL^3–6. Crystal structures of [CuL¹(py)]ClO₄, CuL⁴, and CuL⁵ were obtained. These new complexes as well as a series of related symmetrical ones (i.e. CuL^7–12) were tested for their in vitro anticancer activity against human liver cancer cell line (Hep-G2) by MTT and apoptosis assay. All of the complexes showed considerable cytotoxic activity against tumor cell lines (IC₅₀ = 5.13–16.24 μg mL^?1). The symmetrical CuL⁷ was the most potent anticancer derivative (IC₅₀ = 5.13 μg mL^?1) compared to the control drug 5-FU (IC₅₀ = 5.4 μg mL^-1, p < 0.05). Flow cytometry experiments showed that the copper derivatives especially [CuL²(py)]ClO₄ and CuL⁷ induced more apoptosis on Hep-G2 tumor cell lines compared to 5-FU.     

Mono-, di-, and trinuclear phosphonate oxygen-bridged copper(II) complexes: syntheses,structures, and properties

Reactions of copper salts, zoledronic acid, and 2,2′-bipyridine/1,10-phenanthroline in aqueous ethanolic solutions afforded four phosphonate oxygen-bridged copper complexes, Cu(bipy)(H₄zdn)(HSO₄) (1), [Cu₂(bipy)₂(H₂zdn)(H₂O)(Cl)]·4H₂O (2), [Cu₂(phen)₂(H₂zdn)(H₂O)(Cl)]·2.5H₂O (3), and [Cu₃(bipy)₃(H₄zdn)(H₂zdn)(SO₄)]·5H₂O (4) (H₅zdn = zoledronic acid, bipy = 2,2′-bipyridine, phen = 1,10-phenanthroline). The copper centers of 1–4 have square pyramidal coordination geometries. The Cu(II) ions are coordinated to bipy/phen, zoledronate, and HSO₄^?/Cl^? forming mononuclear units for 1, dinuclear for 2 and 3, and trinuclear for 4. These building units are further extended into 3-D supramolecular networks via multiple hydrogen bond interactions. Temperature-dependent magnetic properties of 2 and 4 suggest weak antiferromagnetic coupling (J = ?4.53(8) cm^?1 for 2, J = ?1.69(4) cm^?1 for 4). The antitumor activity of 2 was evaluated against the human lung cancer cell line and indicates effective time- and dose-dependent cytotoxic effects.     

A magnetic metal-organic framework as a new sorbent for solid-phase extraction of copper(II), and its determination by electrothermal AAS

We report on the synthesis of Fe₃O₄-functionalized metal-organic framework (m-MOF) composite from Zn(II) and 2-aminoterephthalic acid by a hydrothermal reaction. The magnetic composite is iso-reticular and was characterized by FTIR, X-ray diffraction, SEM, magnetization, and TGA. The m-MOF was then applied as a sorbent for the solid-phase extraction of trace levels of copper ions with subsequent quantification by electrothermal AAS. The amount of sorbent applied, the pH of the sample solution, extraction time, eluent concentration and volume, and desorption time were optimized. Under the optimum conditions, the enrichment factor is 50, and the sorption capacity of the material is 2.4 mg g^?1. The calibration plot is linear over the 0.1 to 10 μg L^?1 Cu(II) concentration range, the relative standard deviation is 0.4 % at a level of 0.1 μg L^?1 (for n?=?10), and the detection limit is as low as 73 ng L^?1. We consider this magnetic MOF composite to be a promising and highly efficient material for the preconcentration of metal ions.

A new quinoline-based chemosensor in ratiometric sensing of Hg2+ ions

A new quinoline-based chemosensor 1 has been designed and synthesised. Its metal ion-binding properties have been documented in organic and aqueous organic solvents. While chemosensor 1 recognises Hg²⁺ ions (K _a = 2.15 × 10⁴ M^? 1) by exhibiting ratiometric change in emission in CHCl₃/CH₃OH (1:1, v/v), under similar condition both Zn²⁺ and Cd²⁺ ions are sensed by significant non-ratiometric increase in emission with measurable red shift. In DMSO/H₂O (5:95, v/v), the sensor 1 exhibits a greater selectivity towards Hg²⁺ ions (K _a = 9.20 × 10³ M^? 1) over the other metal ions examined.     

Synthesis,Crystal Structure and Magnetic Property of a New Binuclear Copper (II) Complex Containing Water Clusters

A new binuclear copper (II) complex {[Cu₂(phen)₂(tar)(H₂O)]·8H₂O}_n (1) has been synthesized and structurally characterized by single-crystal X-ray diffraction analysis. The complex crystallizes in monoclinic system, space group P2(1), with a = 7.1710(5), b = 22.0124(15), c = 10.6691(7) Å, β = 102.541(1)°, V = 1643.95(19) Å³, Z = 2. Compound 1 is further extended to a 2D supramolecular framework by hydrogen bonds and π–π stacking interactions. Especially, six of the eight uncoordinated water molecules are connected via hydrogen bonding interactions forming 1D chain, which play an important role in the stabilization of the crystal structure. Furthermore, magnetic susceptibility measurements of this complex shows weak antiferromagnetic exchange between the copper (II) ions (J = ?5.92 cm^?1).     

Investigation of the Binding Properties of the Cosmetic Peptide Argireline and Its Derivatives Towards Copper(II) Ions

Isothermal titration calorimetry, potentiometric titration and circular dichroism spectroscopy were used to study the interaction of copper(II) ions with Argireline (Ac-Glu-Glu-Met-Gln-Arg-Arg-NH₂) and three of its point mutation derivatives: Glu-Ala-Met-Gln-Arg-Arg-NH₂ (AN1), Glu-Ala-His-Gln-Arg-Arg-NH₂ (AN2) and Glu-Ala-Met-Gln-Ala-Arg-NH₂ (AN3). Under the experimental conditions (20 mmol·L^?1 Caco solution, pH 6, 298.15 K), copper(II) ions form 1:1 complexes with the peptides Argireline, AN1, and AN2. The complexation reactions are entropy-driven processes. The stability of the resulting complexes increases in the order log₁₀K_Cu(AN1) < log₁₀K_{Cu(Argireline)} < log₁₀K_Cu(AN2). The relationship between the point mutations of Argireline and the binding properties of these peptides towards copper(II) ions is discussed.     

Polythiophene-coated Fe3O4 nanoparticles as a selective adsorbent for magnetic solid-phase extraction of silver(I), gold(III), copper(II) and palladium(II)

We have developed a fast method for sensitive extraction and determination of the metal ions silver(I), gold(III), copper(II) and palladium(II). Fe₃O₄ magnetic nanoparticles were modified with polythiophene and used for extraction the metal ions without a chelating agent. Following extraction, the ions were determined by flow injection inductively coupled plasma optical emission spectrometry. The influence of sample pH, type and volume of eluent, amount of adsorbent, sample volume and time of adsorption and desorption were optimized. Under the optimum conditions, the calibration plots are linear in the 0.75 to 100 μg L^?1 concentration range (R²?>?0.998), limits of detection in the range from 0.2 to 2.0 μg L^?1, and enhancement factors in the range from 70 to 129. Precisions, expressed as relative standard deviations, are lower than 4.2 %. The applicability of the method was demonstrated by the successful analysis of tap water, mineral water, and river water.

Mineral Supplementation Increases Erythrose Reductase Activity in Erythritol Biosynthesis from Glycerol by Yarrowia lipolytica

The aim of this study was to examine the impact of divalent copper, iron, manganese, and zinc ions on the production of erythritol from glycerol by Yarrowia lipolytica and their effect on the activity of erythrose reductase. No inhibitory effect of the examined minerals on yeast growth was observed in the study. Supplementation with MnSO₄·7H₂O (25 mg l^?1) increased erythritol production by Y. lipolytica by 14.5 %. In the bioreactor culture with manganese ion addition, 47.1 g l^?1 of erythritol was produced from 100.0 g l^?1 of glycerol, which corresponded to volumetric productivity of 0.87 g l^?1 h^?1. The addition of Mn²⁺ enhanced the intracellular activity of erythrose reductase up to 24.9 U g^?1 of dry weight of biomass (DW), hence, about 1.3 times more than in the control.     

Rapid dissolution of spruce cellulose in H<Subscript>2</Subscript>SO<Subscript>4</Subscript> aqueous solution at low temperature

Dissolution of cellulose is the key challenge in its applications. It has been discovered that spruce cellulose with high molecular weight (4.10 × 10⁵ g mol^?1) can be dissolved in 64 wt% H₂SO₄ aqueous solution at low temperature within 2 min, and the cellulose concentration in solution can reach as high as 5 % (w/v). FT-IR spectra and XRD spectra proved that it is a direct solvent for cellulose rather than a derivative aqueous solution system. The cold H₂SO₄ aqueous solution broke the hydrogen bonds among cellulose molecules and the low temperature dramatically slowed down the hydrolysis, which led to the dissolution of cellulose. The resultant cellulose solution was relatively stable, and the molecular weight of cellulose only slightly decreased after storage at ?20 °C for 1 h. Due to the high molecular weight of cellulose, cellulose solution could form regenerated films with good mechanical properties and transparency at low concentration (2 % w/v). This work has not only provided the new evidence of cellulose dissolution which facilitated the development of cellulose solvent, but also suggested a convenient way to directly transfer cellulose with high molecular weight into materials without structure modifications.     

Composition and stability constants of copper(II) complexes with succinic acid determined by capillary electrophoresis

The advantage of capillary electrophoresis was demonstrated for studying a complicated system owing to the dependence of direction and velocity of the electrophoretic movement on the charge of complex species. The stability constants of copper(II) complexes with ions of succinic acid were determined by capillary electrophoresis, including the 1?:?2 metal to ligand complexes which are rarely mentioned. The measurements were carried out at 25 °C and ionic strength of 0.1, obtained by mixing the solutions of succinic acid and lithium hydroxide up to pH 4.2–6.2. It was shown that while pH was more than 4.5 the zone of copper(II) complexes with succinate moves as an anion. It is impossible to treat this fact using only the complexes with a metal-ligand ratio of 1?:?1 (CuL⁰, CuHL⁺). The following values of stability constants were obtained: log β(CuL) = 2.89 ± 0.02, log β(CuHL⁺) = 5.4 ± 0.5, log β(CuL₂^2?) = 3.88 ± 0.05, log β(CuHL₂^?) = 7.2 ± 0.3.     

Synthesis,crystal structure,and DNA-binding studies of a one-dimensional copper(II) polymer bridged both by oxamidate and thiocyanato ligands

A new one-dimensional copper(II) polymer, [Cu₄(dmapox)₂(SCN)₄(CH₃OH)₂] _n , where dmapox is the dianion of N,N′-bis[3-(dimethylamino)propyl]oxamide, was synthesized and characterized by elemental analysis, conductivity measurement, IR, and electronic spectral studies. The crystal structure of the copper(II) complex has been determined by X-ray single-crystal diffraction. The complex crystallizes in triclinic, space group P ? 1 and exhibits infinite one-dimensional copper(II) polymeric chain bridged both by bis-tridentate μ-trans-dmapox and μ-1,3-thiocyanato ligand. The environment around the copper(II) atom can be described as distorted square-pyramid. The Cu···Cu separations through the oxamidate and thiocyanato bridges are 5.246(2) Å (Cu1–Cu1ⁱ), 5.2649(14) Å (Cu2–Cu2ⁱⁱ), and 5.8169(15) Å (Cu1–Cu2), respectively. The interaction of the copper(II) complex with herring sperm DNA (HS-DNA) has been investigated by using absorption and emission spectral and electrochemical techniques and viscometry. The results reveal that the copper(II) complex may interact with DNA in the mode of groove binding with the intrinsic binding constant of 2.56 × 10⁵ M^?1.     

Solid Phase Extraction and Determination of Lead in Water Samples Using Silica Gel Homogeneously Modified by Thiosalicylic Acid

Abstract

Silica gel was modified by thiosalicylic acid via homogeneous routes to obtain immobilized silica gel sorbent (TSA‐immobilized silica gel). This new sorbent was characterized using variety of physical chemistry techniques including, high resolution solid state ¹³C and ²⁹Si CP/MAS NMR, X‐ray photoelectron spectroscopy (XPS), thermal analysis (TGA and DTA), elemental analysis, and BET surface analysis as well as infrared spectroscopy (FTIR). New support was used for the selective extraction and concentration of lead ions by silica gel modified with thiosalicylic acid, as a highly selective and stable reagent, from aquatic samples and its determination with FAAS. Lead ions can be desorbed with 4 mol dm^?3 HNO₃. The sorption capacity for lead ions are found in the range of 64.40 to 69.90 µmol g^?1 of chelating matrix. Tolerance limits for electrolytes and some trace metals in the sorption of lead is reported. Preconcentration factor was found as 150 for Pb(II). The lead in drinking water, mineral water, tap water, and fruit juice was quantitatively recovered with a relative standard deviation lower than 1.50%. A detection limit of the method for lead ions was found as 3.7 µg l^?1.     

Preparation of Fe3O4/chitosan/poly(acrylic acid) composite particles and its application in adsorbing copper ion (II)

Fe₃O₄/chitosan/poly(acrylic acid) (Fe₃O₄/CS/PAA) composite particles, which are reusable, biodegradable and of high adsorption capacity, have been prepared through polymerizing acrylic acid in chitosan and Fe₃O₄ nanoparticles aqueous solution. By varying in-feed mole ratio of carboxyl to amino group (n^c/n^a) and reactant concentration, the average diameter of Fe₃O₄/CS/PAA composite particles can be controlled to vary from 100 to 300 nm. FT-IR, XRD and TEM were used to characterize Fe₃O₄/CS/PAA composite particles. Results showed that Fe₃O₄ was indeed incorporated into CS/PAA particles. The composite particles showed high efficient to remove copper ions (II) in aqueous solution. Adsorption kinetic studies showed that the adsorption process followed a pseudo-second-order kinetic model and the equilibrium data agreed well with the Langmuir model. The saturated adsorption capacity obtained from the experimental was 193 mg/g in close to proximity to the data 200 mg/g calculated from Langmuir model. The saturated adsorption capacity still retained 100 mg/g after three cycles of adsorption–desorption of copper ions (II).