High-resolution solid-state NMR spectroscopy of protons with homonuclear dipolar decoupling schemes under magic-angle spinning

High-resolution NMR spectroscopy of ¹H spins in the solid state is normally rendered difficult due to the strong homonuclear ¹H–¹H dipolar couplings. Even under very high-speed magic-angle spinning (MAS) at ca. 60–70 kHz, these couplings are not completely removed. An appropriate radiofrequency pulse scheme is required to average out the homonuclear dipolar interactions in combination with MAS to get high-resolution ¹H NMR spectrum in solid state. Several schemes have been introduced in the recent past with a variety of applications also envisaged. Development of some of these schemes has been made possible with a clear understanding of the underlying spin physics based on bimodal Floquet theory. The utility of these high-resolution pulse schemes in combination with MAS has been demonstrated for spinning speeds of 10–65 kHz in a range of ¹H Larmor frequencies from 300 to 800 MHz.     

Study on ethyl groups with two different orientations in [N(C2H5)4]2CuBr4

The crystal structure and phase transition temperature of [N(C₂H₅)₄]₂CuBr₄ are studied using X-ray diffraction and differential scanning calorimetry (DSC); measurements revealed a tetragonal structure and the two phase transition temperatures T_C of 204 K and 255.5 K. The structural geometry near T_C is discussed in terms of the chemical shifts for ¹H magic angle spinning (MAS) nuclear magnetic resonance (NMR) and ¹³C cross-polarization (CP)/MAS NMR. The two inequivalent ethyl groups are distinguishable by the ¹³C NMR spectrum. The molecular motions are discussed in terms of the spin–lattice relaxation times T_1ρ in the rotating frame for ¹H MAS NMR and ¹³C CP/MAS NMR. The T_1ρ results reveal that the ethyl groups undergo tumbling motion, and furthermore that the ethyl groups are highly mobile.     

13C, 15N CPMAS NMR and GIAO DFT calculations of stereoisomeric oxindole alkaloids from Cat's Claw (Uncaria tomentosa)

Oxindole alkaloids, isolated from the bark of Uncaria tomentosa [Willd. ex Schult.] Rubiaceae, are considered to be responsible for the biological activity of this herb. Five pentacyclic and two tetracyclic alkaloids were studied by solid-state NMR and theoretical GIAO DFT methods. The ¹³C and ¹⁵N CPMAS NMR spectra were recorded for mitraphylline, isomitraphylline, pteropodine (uncarine C), isopteropodine (uncarine E), speciophylline (uncarine D), rhynchophylline and isorhynchophylline. Theoretical GIAO DFT calculations of shielding constants provide arguments for identification of asymmetric centers and proper assignment of NMR spectra. These alkaloids are 7R/7S and 20R/20S stereoisomeric pairs. Based on the ¹³C CP MAS chemical shifts the 7S alkaloids (δ C3 70–71 ppm) can be easily and conveniently distinguished from 7R (δC3 74.5–74.9 ppm), also 20R (δC20 41.3–41.7 ppm) from the 20S (δC20 36.3–38.3 ppm). The epiallo-type isomer (3R, 20S) of speciophylline is characterized by a larger ¹⁵N MAS chemical shift of N4 (64.6 ppm) than the allo-type (3S, 20S) of isopteropodine (δN4 53.3 ppm). ¹⁵N MAS chemical shifts of N1–H in pentacyclic alkaloids are within 131.9–140.4 ppm.     

Highly-efficient fully-fiberized mid-infrared differential frequency generation source and its application to laser spectroscopy

Widely-tunable, fully-monolithic, mid-infrared (mid-IR) deference frequency generation source (DFG) is presented. By using a custom designed fiber-pigtailed periodically poled lithium niobate (PPLN) crystal module the idler beam was generated with an efficiency of 21%/W, yielding 2.6 mW of optical output power. The proposed all-fiber configuration radically simplified the optical frequency conversion setup, making it robust and easily configurable. The usefulness of the constructed source was verified by performing simultaneous wavelength modulation spectroscopy (WMS) laser trace gas detection of methane, near 2999 cm^?1, and ethane, near 2997 cm^?1, via two independently generated, tunable idler beams.     

The interaction between inorganic Li salts (LiTf,LiNTf2) and the surface of alumina particles as studied with solid state nuclear magnetic resonance

The interaction between Li salts {LiTf (Tf = CF₃SO₃) and LiNTf₂ (NTf₂ = N(SO₂CF₃)₂)} with surface modified alumina particles (basic, neutral or acidic) is investigated employing a range of advanced solid state NMR methodologies. Utilizing ⁷Li MAS NMR, a new signal – in addition to the signal of the pure salt – could be identified in the composite samples, increasing with increasing basicity of the alumina surface. Employing ⁷Li–{¹H} CPMAS NMR and ⁷Li–{¹H}–CPMAS–{²⁷Al} REAPDOR NMR spectroscopy, this new signal could be unequivocally assigned to an alumina-surface bound Li species. For the anions, ¹⁹F MAS NMR spectra clearly prove the existence of new anion sites. Employing ¹⁹F–{⁷Li} REDOR spectroscopy and ¹⁹F–{²⁷Al} TRAPDOR NMR spectroscopy, the identified signals could be safely assigned to anions within the pristine Li salt and anions attached to the alumina surface. These results present direct evidence for the anion???alumina surface and cation???alumina surface interaction, suggested by several authors to aid in the interpretation of the effect of the ceramic additive on the ionic conductivity.     

Hetero-/homogeneous combustion of ethane/air mixtures over platinum at pressures up to 14 bar

The hetero-/homogeneous combustion of fuel-lean ethane/air mixtures over platinum was investigated experimentally and numerically at pressures of 1–14 bar, equivalence ratios of 0.1–0.5, and surface temperatures ranging from 700 to 1300 K. Experiments were carried out in an optically accessible channel-flow reactor and included in situ 1-D Raman measurements of major gas phase species concentrations across the channel boundary layer for determining the catalytic reactivity, and planar laser induced fluorescence (LIF) of the OH radical for assessing homogeneous ignition. Numerical simulations were performed with a 2-D CFD code with detailed hetero-/homogeneous C₂ kinetic mechanisms and transport. An appropriately amended heterogeneous reaction scheme has been proposed, which captured the increase of ethane catalytic reactivity with rising pressure. This scheme, when coupled to a gas-phase reaction mechanism, reproduced the combustion processes over the reactor extent whereby both heterogeneous and homogeneous reactions were significant and moreover, provided good agreement to the measured homogeneous ignition locations. The validated hetero-/homogeneous kinetic schemes were suitable for modeling the catalytic combustion of ethane at elevated pressures and temperatures relevant to either microreactors or large-scale gas turbine reactors in power generation systems. It was further shown that the pressure dependence of the ethane catalytic reactivity was substantially stronger compared to that of methane, at temperatures up to 1000 K. Implications for high-pressure catalytic combustion of natural gas were finally drawn.     

NMR studies of cation transport in the crystalline ion conductors MCF3SO3 (M = Li,Na) and Li7TaO6

In this contribution we present studies on the mechanism of ion transport in crystalline solid electrolytes employing a range of different solid state nuclear magnetic resonance (NMR) experiments. The first part is devoted to the elucidation of a possible correlation of cation transport and anion reorientation in the dynamically disordered rotor phases of alkali trifluoromethane sulfonates MCF₃SO₃ (M = Li, Na) employing ⁷Li, ¹³C, ¹⁷O and ²³Na NMR line shape analysis, whereas the second part focuses on the tracking of cation diffusion pathways in the hexaoxometalate Li₇TaO₆ utilizing ⁶Li 1D and 2D exchange MAS NMR approaches.     

1H and 13C MAS NMR studies of light alkanes activation over MFI zeolite modified by Zn vapour

The early stages of methane, ethane and propane conversion were studied by in situ ¹H and ¹³C MAS NMR techniques over fully exchanged Zn²⁺/MFI catalyst obtained by the reaction with zinc vapour. The in situ techniques revealed strong interaction of alkanes with Zn²⁺ cations evidenced by significant shift of the corresponding NMR lines. Besides that, the formation of methyl zinc, ethyl zinc and n-propyl zinc species along with bridging and silanol surface OH-groups was detected already at the ambient temperature. These results pointed to dissociative adsorption of alkanes over (ZO)–Zn²⁺–(OZ) and (ZO)–Zn²⁺–(OSi) active sites of the catalyst. The dissociative adsorption was shown to be a dead-end surface reaction in the case of methane starting reactant, while in the case of ethane and propane, it appeared to be responsible for the initiation of the catalytic cycle leading to alkenes and dihydrogen formation and regeneration of zinc containing catalytic sites.     

Refinements of the WKMC empirical line lists (5852–7919 cm−1) for methane between 80 K and 296 K

During the last 4 years, empirical line lists for methane at room temperature and at 80 K were constructed from spectra recorded by (i) differential absorption spectroscopy (DAS) in the high energy part of the tetradecad (5852?6195 cm^?1) and in the icosad (6717–7589 cm^?1) and (ii) high sensitivity CW-Cavity Ring Down Spectroscopy (CRDS) in the 1.58 μm and 1.28 μm transparency windows (6165–6750 cm^?1 and 7541–7919 cm^?1, respectively). We have recently constructed the global line lists for methane in “natural” isotopic abundance, covering the spectral region from 5854 to 7919 cm^?1 (Campargue A, Wang L, Kassi S, Mondelain D, Bézard B, Lellouch E, et al., An empirical line list for methane in the 1.26–1.71 μm region for planetary investigations (T=80–300 K). Application to Titan, Icarus 219 (2012) 110–128). These WKMC (Wang, Kassi, Mondelain, Campargue) empirical lists include about 43,000 and 46,420 lines at 80±3 K and 296±3 K, respectively. The “two temperature method” provided lower state energy values, E_emp, for about 24,000 transitions allowing us to account satisfactorily for the temperature dependence of the methane absorption over the considered region. The obtained lists have been already successfully applied in a large range of temperature conditions existing on Titan, Uranus, Pluto, Saturn and Jupiter.In the present contribution, we provide some improvements to our lists by using literature data to extend the set of lower state energy values and by correcting the distortion of the high E_emp values (J>10) due to the temperature gradient existing in the cryogenic cell used for the recordings. The proposed refinements are found to have an overall limited impact but they may be significant in some spectral intervals below 6500 cm^?1.The new version of our lists at 80 K and 296 K is provided as Supplementary Material: the WKMC@80K+ and WKMC@296K lists are adapted for planetary and atmospheric applications, respectively. The WKMC@80K+ list is made applicable over a wider range of temperatures and shows satisfactory extrapolation capabilities up to room temperature. It was obtained by transferring to the 80 K list the 27,580 single lines present only in the 296 K list, with corresponding lower state energy values chosen to make them below the detectivity limit at 80 K.In the discussion, the different line lists and databases available for methane in the near infrared are compared and some suggestions are given.     

The absorption spectrum of methane at 80 and 294 K in the icosad (6717–7589 cm−1): Improved empirical line lists,isotopologue identification and temperature dependence

Using a cryogenic cell and a series of Distributed Feed Back (DFB) diode lasers, new high resolution spectra of methane have been recorded at 80 K and room temperature by differential absorption spectroscopy (DAS) between 6717 and 7589 cm^?1 (1.49–1.32 μm). The investigated spectral region corresponds to the very congested icosad, which is not tractable by theory. Empirical lists of 19,940 and 24,001 lines were constructed from the 80 K and room temperature spectrum, respectively. The room temperature list adds about 8500 features to the empirical list of 15,375 lines at 296 K adopted in the HITRAN database from the original work of L. Brown (Brown, L. Empirical line parameters of methane from 1.1 to 2.1 μm. JQSRT 2005;96:251–70). A number of relatively strong CH₄ lines located near strong water lines were found missing in the HITRAN line list. The improved sensitivity allowed adding more than 7000 lines to our previous list of about 12,000 transitions at 80 K (Campargue A, Wang L, Kassi S, Ma?át M, Votava O. Temperature dependence of the absorption spectrum of CH₄ by high resolution spectroscopy at 81 K: (II) The Icosad region (1.49–1.30 μm). JQSRT 2010;111:1141–51). In order to facilitate identification of the transitions of the different methane isotopologues present in “natural” isotopic abundance, spectra of highly enriched CH₃D and ¹³CH₄ samples were recorded with the same experimental setup, both at room temperature and at 80 K.From the variation of the line strengths between 80 K and 294 K, the low energy values of about 12,000 transitions were determined. They allow accounting for the temperature dependence of 84 and 93% of the methane absorbance in the region, at room temperature and 80 K, respectively. As a result, we provide as supplementary material two complete line lists at 80 K and 294 K, including CH₃D and ¹³CH₄ identification and lower state energy values.     

Chloroethene dehalogenation with ultrasonically produced air-stable nano iron

Zerovalent iron (ZVI) has been demonstrated to be suitable for the dehalogenation of environmental pollutants such as chloroethenes. The construction of ZVI reactive barriers by conventional engineering measures is expensive and limited to shallow aquifers. The use of nanosized ZVI particles opens new opportunities to construct ZVI barriers with less invasive techniques. However, nanosized particles of pure ZVI are pyrophoric and react spontaneously with atmospheric oxygen.In this study, nanosized air-stable ZVI particles were produced by applying ultrasound to a solution of Fe(CO)₅ in edible oil. The resulting iron nanoparticles were dispersed in a carbon matrix, and coated with a non-crystalline carbon layer of approx. 2.5 nm. Although, these nanoparticles are non-pyrophoric and stable in air, dechlorination of tetrachloroethene was demonstrated in synthetic aqueous medium and in polluted groundwater. Additionally, hydrogen was formed. Due to the larger surface area, significantly higher mass-normalized reaction rates of the novel carbon-coated nanoparticles were obtained as compared to conventional bulk ZVI material. Surface normalized pseudo-first-order-reaction rates of k_SA = 3.49 × 10^?3 L h^?1 m^?2 and 2.33 × 10^?2 L h^?1 m^?2 were calculated for the nano-ZVI and the bulk ZVI, respectively. Dechlorination reaction products of the novel nano-ZVI were trichloroethene, cis-dichloroethene, vinyl chloride, ethene, and ethane.     

Esterification of sodium 4-hydroxybenzoate by ultrasound-assisted solid–liquid phase-transfer catalysis using dual-site phase-transfer catalyst

The catalytic esterification of sodium 4-hydroxybenzoate with benzyl bromide by ultrasound-assisted solid–liquid phase-transfer catalysis (U-SLPTC) was investigated using the novel dual-site phase-transfer catalyst 4,4′-bis(tributylammoniomethyl)-1,1′-biphenyl dichloride (BTBAMBC), which was synthesized from the reaction of 4,4′-bis(chloromethyl)-1,1′-biphenyl and tributylamine. Without catalyst and in the absence of water, the product yield at 60 °C was only 0.36% in 30 min of reaction even under ultrasound irradiation (28 kHz/300 W) and 250 rpm of stirring speed. When 1 cm³ of water and 0.5 mmol of BTBAMBC were added, the yield increased to 84.3%. The catalytic intermediate 4,4′-bis(tributylammoniomethyl)-1,1′-biphenyl di-4-hydroxybenzoate was also synthesized to verify the intrinsic reaction which was mainly conducted in the quasi-aqueous phase locating between solid and organic phases. Pseudo-first-order kinetic equation was used to correlate the overall reaction, and the apparent rate coefficient with ultrasound (28 kHz/300 W) was 0.1057 min⁻¹, with 88% higher than that (0.0563 min⁻¹) without ultrasound. The esterification under ultrasonic irradiation using BTBAMBC by solid–liquid phase-transfer catalysis was developed.     

Bulk magnetization and 1H NMR spectra of magnetically heterogeneous model systems

Bulk magnetization and ¹H static and magic angle spinning (MAS) nuclear magnetic resonance (NMR) spectra of two magnetically heterogeneous model systems based on laponite (LAP) layered silicate or polystyrene (PS) with low and high proton concentration, respectively, and ferrimagnetic Fe₂O₃ nano- or micro-particles have been studied. In LAP+Fe₂O₃, a major contribution to the NMR signal broadening is due to the dipolar coupling between the magnetic moments of protons and magnetic particles. In PS+Fe₂O₃, due to the higher proton concentration in polystyrene and stronger proton–proton dipolar coupling, an additional broadening is observed, i.e. ¹H MAS NMR spectra of magnetically heterogeneous systems are sensitive to both proton–magnetic particles and proton–proton dipolar couplings. An increase of the volume magnetization by ～1 emu/cm³ affects the ¹H NMR signal width in a way that is similar to an increase of the proton concentration by ～2×10²²/cm³. ¹H MAS NMR spectra, along with bulk magnetization measurements, allow the accurate determination of the hydrogen concentration in magnetically heterogeneous systems.     

Synthesis of thin diamond films from faceted nanosized crystallites

Diamond films consist of crystallites having nanometer grains were deposited using low methane concentration by hot filament chemical vapor deposition (HFCVD). The results show that films consist of nanodiamond grains with grain sizes ranging from 20 nm to 200 nm having thickness dependent size. Increasing the deposition time, the grain size increases and hence the thickness of the film increases. The diamond nucleation (nucleation density 10¹⁰ cm⁻²) is comparable to that obtained by biasing the substrate. The use of low methane concentration for the formation of nano crystallites improves the quality of the film as indicated by Raman spectroscopy. The distance between the filament and substrate is increased while maintaining the substrate temperature. The effects of this large separation on the gas phase chemistry are discussed which helps to understand the reduced size of the crystallites under input gas ratios when microcrystallines are obtained.     

Ultrasound assisted co-precipitation synthesis and catalytic performance of mesoporous nanocrystalline NiO-Al2O3 powders

Mesoporous nanocrystalline NiO-Al₂O₃ powders with high surface area were synthesized via ultrasound assisted co-precipitation method and the potential of the selected samples as catalyst was investigated in dry reforming reaction for preparation of synthesis gas. The prepared samples were characterized by N₂ adsorption (BET), X-ray diffraction (XRD), Temperature programmed reduction and oxidation (TPR, TPO) and scanning electron microscopy (SEM) techniques. The effects of pH, power of ultrasound irradiation, aging time and calcination temperature on the textural properties of the catalysts were studied. The sample prepared under specified conditions (pH10, 70 W, without aging time and calcined at 600 °C) exhibited the highest surface area (249.7 m² g⁻¹). This catalyst was calcined at different temperature and employed in dry reforming of methane and the catalytic results were compared with those obtained over the catalysts prepared by impregnation and co-precipitation methods. The results showed that the catalyst prepared by ultrasound assisted co-precipitation method exhibited higher activity and stability with lower degree of carbon formation compared to catalysts prepared by co-precipitation and impregnation methods.     

1H NMR study of proton dynamics in (NH4)3H(SO4)2

Proton dynamics in (NH₄)₃H(SO₄)₂ has been studied by means of ¹H solid-state NMR. The ¹H magic-angle-spinning (MAS) NMR spectra were traced at room temperature (RT) and at Larmor frequency of 400.13 MHz. ¹H static NMR spectra were measured at 200.13 MHz in the range of 135–490 K. ¹H spin-lattice relaxation times, T₁, were measured at 200.13 and 19.65 MHz in the ranges of 135–490 and 153–456 K, respectively. The ¹H chemical shift for the acidic proton (14.7 ppm) indicates strong hydrogen bonds. In phase III, NH₄⁺ reorientation takes place; one type of NH₄⁺ ions reorients with an activation energy (E_a) of 14 kJ mol^− 1 and the inverse of a frequency factor (τ₀) of 0.85 × 10^− 14 s. In phase II, a very fast local and anisotropic motion of the acidic protons takes place. NH₄⁺ ions start to diffuse translationally, and no proton exchange is observed between NH₄⁺ ions and the acidic protons. In phase I, both NH₄⁺ ions and the acidic protons diffuse translationally. The acidic protons diffuse with parameters of E_a = 27 kJ mol^− 1 and τ₀ = 4.2 × 10^− 13 s. The translational diffusion of the acidic protons is responsible for the macroscopic proton conductivity, as the NH₄⁺ translational diffusion is slow and proton exchange between NH₄⁺ ions and the acidic protons is negligible.     

Effect of growth time of hydrothermally grown cobalt hydroxide carbonate on its supercapacitive performance

We present the time-dependent synthesis of cobalt hydroxide carbonate nanorods by hydrothermal method with a systematic increase of different parameters such as specific surface area and specific capacitance as a function of different synthesis time. Morphological characterization of the cobalt hydroxide carbonate nanorods were carried out by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The results show that variation of the time of reaction plays a crucial role in the transformation of samples’ morphology. Cobalt hydroxide carbonate nanorods synthesized with 12 h reaction time, which is the reaction just before the materials transforms into cobalt oxide under the same synthesis conditions exhibited the highest specific capacitance of 466 F g⁻¹ at a current density of 1 A g⁻¹ in 6 M KOH electrolyte and also showed excellent stability with ∼99% capacitance retention after 2000 cycles at a current density of 10 A g⁻¹. Based on the above results, the cobalt hydroxide carbonate nanorods show a considerable potential as electrodes materials for supercapacitor applications.     

High-density uniformly aligned silicon nanotip arrays and their enhanced field emission characteristics

High-density (∼10⁸/cm²), uniformly aligned silicon nanotip arrays are synthesized by a plasma-assisted hot-filament chemical vapor deposition process using mixed gases composed of hydrogen, nitrogen and methane. The silicon nanotips grow along 〈112〉, and are coated in situ with a ∼3 nm thick amorphous carbon film by increasing the methane concentration in the source gases. In comparison to the uncoated silicon nanotips arrays, the coated tips have enhanced field emission properties with a turn-on field of 1.6 V/μm (for 10 μA/cm²) and threshold field of 3 V/μm (for 10 mA/cm²), suggesting their potential applications for flat panel displays.     

Compact sensor for methane detection in the mid infrared region based on Quartz Enhanced Photoacoustic Spectroscopy

A compact system for methane sensing based on the Quartz-Enhanced Photoacoustic Spectroscopy technique has been developed. This development has been taken through two versions which were based respectively on a Fabry Perot quantum wells diode laser emitting at 2.3 μm, and on a quantum wells distributed feedback diode laser emitting at 3.26 μm. These lasers emit near room temperature in the continuous wave regime. A spectrophone consisting of a quartz tuning fork and one steel microresonator was used. Second derivative wavelength modulation detection was used to perform low methane concentration measurements. The sensitivity and the linearity of the QEPAS sensor were studied. A normalized noise equivalent absorption coefficient of 7.26 × 10⁻⁶ cm⁻¹ W/Hz^1/2 was achieved. This corresponds to a detection limit of 15 ppmv for 12 s acquisition time.     

Ultrasonic-assisted synthesis of 1,4-disubstituted 1,2,3-triazoles via various terminal acetylenes and azide and their quorum sensing inhibition

An efficient synthesis of 1,4-disubstituted 1,2,3-triazole derivatives was studied. 1,4-Disubstituted 1,2,3-triazoles containing isoxazole and thymidine structures were synthesized in 84–96% yields starting from various terminal isoxazole ether alkynes and β-thymidine azide derivatives via a 1,3-dispolar cycloaddition using copper acetate, sodium ascorbate as the catalyst under ultrasonic assisted condition. All the target compounds were characterized by HRMS, FT-IR, ¹H NMR and ¹³C NMR spectroscopy. Furthermore, the quorum sensing inhibitory activities of synthesized compounds were evaluated with Chromobacterium violaceum (C. Violaceum CV026) based on their inhibition of violacein production, with compound C₁₀-HSL as a positive control. The compounds 8a, 8c and 8f exhibited considerable levels of inhibitory activity against violacein production, and IC₅₀ values were 217 ± 19, 223 ± 20 and 42.8 ± 4.5 μM, respectively, which highlighted the potential of these compounds as lead structures for further research towards the development of novel QS inhibitors.