Stabilizer of a function in the gage group

It is proved that, for the dimension d of the stabilizer of an analytic function z(x, y) in the gage pseudogroup G = {z(x, y) → c(z(a(x), b(y))}, there are precisely four possibilities: (1) d = ∞ and the complexity of z is zero, (2) d = 3 and the complexity of z is equal to one, (3) d = 1 and z is equivalent the function r(x + y) ? x of complexity two, (4) d = 0 in all remaining cases.     

Polar Phase of Superfluid <Superscript>3</Superscript>He: Dirac Lines in the Parameter and Momentum Spaces

The time reversal symmetric polar phase of the spin-triplet superfluid ³He has two types of Dirac nodal lines. In addition to the Dirac loop in the spectrum of the fermionic Bogoliubov quasiparticles in the momentum space (p _x , p _y , p _z ), the spectrum of bosons (magnons) has Dirac loop in the 3D space of parameters—the components of magnetic field (H _x ,H _y ,H _z ). The bosonic Dirac system lives on the border between the type-I and type-II.     

Magnetic phase diagram of the Bi<Subscript>1-<Emphasis Type="Italic">x</Emphasis></Subscript>Ca<Subscript>x</Subscript>MnO<Subscript>3</Subscript> manganites

The magnetic and elastic properties of the Bi_1-xCa_xMnO₃ manganites are studied. The phase transformations revealed are ferromagnet-spin glass (x≥0.15) and spin glass-charge-ordered antiferromagnet (x≥0.25). The ferromagnetic state is characterized by ordering of the Mn³⁺d _x ²-y orbitals. It is suggested that thespin glass state originates from local static Jahn-Teller distortions. The antiferromagnetic charge-ordered and the spin-glass disordered phases coexist in samples with 0.25<x<0.32, which may be due to the charge order-disorder phase transformation being martensitic in character. The magnetic phase diagram is constructed.     

Symmetries of the pseudo-diffusion equation and related topics

We show in details how to determine and identify the algebra g = {A_i} of the infinitesimal symmetry operators of the following pseudo-diffusion equation (PSDE) LQ ≡ \(\left[ {\frac{\partial }{{\partial t}} - \frac{1}{4}\left( {\frac{{{\partial ^2}}}{{\partial {x^2}}} - \frac{1}{{{t^2}}}\frac{{{\partial ^2}}}{{\partial {p^2}}}} \right)} \right]\) Q(x, p, t) = 0. This equation describes the behavior of the Q functions in the (x, p) phase space as a function of a squeeze parameter y, where t = e ^2y. We illustrate how G _i(λ) ≡ exp[λA _i] can be used to obtain interesting solutions. We show that one of the symmetry generators, A ₄, acts in the (x, p) plane like the Lorentz boost in (x, t) plane. We construct the Anti-de-Sitter algebra so(3, 2) from quadratic products of 4 of the A _i, which makes it the invariance algebra of the PSDE. We also discuss the unusual contraction of so(3, 1) to so(1, 1)? h². We show that the spherical Bessel functions I ₀(z) and K ₀(z) yield solutions of the PSDE, where z is scaling and “twist” invariant.     

Measuring entanglement-induced quantum correlations in the oscillatory motion of a trapped ion

The preparation of a wide class of entangled vibrational states involving two or three phononic modes of a three-dimensional trapped ion has been reported in the literature from both theoretical and experimental points of view. Here, the time evolution of such a system from an initial condition wherein two oscillatory modes (M _x, M _y) are reciprocally entangled and both are disentangled to the third mode (M _z) is studied. By coupling one of the entangled oscillators (M _x) with the third oscillator (M _z), a correlation between the two uncoupled modes (M _y, M _z) is induced, well visible when the mean value of a suitable operator is considered. A method of measuring the expectation value of a vibrational observable is briefly sketched and then exploited in order to reveal such nonclassical behavior.     

Multicomponent <Emphasis Type="Italic">n</Emphasis>-(Bi,Sb)<Subscript>2</Subscript>(Te,Se,S)<Subscript>3</Subscript> solid solutions with different atomic substitutions in the Bi and Te sublattices

The thermoelectric properties of n-Bi_{2 ? x} Sb _x Te_{3 ? y ? z} Se _y S _z solid solutions are studied in the temperature range 300–550 K. It is shown that an increase in the parameter β determining the figure-of-merit Z of the material is observed in compositions with the optimally related effective mass of the density of states m/m ₀, the carrier mobility μ₀, and the lattice thermal conductivity κ _L . Within the temperature range 300–350 K, the parameter β and the figure-of-merit Z are found to increase in solid solutions with substitutions in both bismuth telluride sublattices Bi → Sb and Te → Se, S (x = 0.16, y = z = 0.12) for optimum electron concentrations. An increase in the electron concentration and substitutions of atoms only in the tellurium sublattice bring about an increase in the β parameter and the value of Z at higher temperatures. Within the range 350–450 K, the parameters β and Z are observed to increase in a solid solution with a low content of substituted atoms in the tellurium sublattice Te → Se, S for y = z = 0.09 and, at higher temperatures up to 550 K, in compositions with tellurium substituted by selenium only, with increasing content of substituted atoms.     

Directing the phase behavior of polyelectrolyte complexes using chiral patterned peptides

Polyelectrolyte complexes (PECs) have a broad range of promising applications as soft materials due to their self-assembly and diversity of structure and chemical composition. Peptide polymer PECs are highly biocompatible and biodegradable, making them particularly useful for encapsulation of food additives and flavors, micellar drug delivery, medical and underwater adhesives, fetal membrane patches, and scaffolds for cell growth in tissue engineering. While parameters affecting PEC formation and stability in regards to charge effects are well researched, little is known about the effects of van der Waals interactions, hydrogen bonding, and secondary structure in these materials. Peptide chirality provides a unique opportunity to manipulate PEC phase to modulate the amount of solid-like (precipitate) or liquid-like (coacervate) character by influencing hydrogen bonding interactions among peptide chains. In previous work, we showed that chiral peptides form solid complexes, while complexes with even one racemic peptide were fluid. This raised the interesting question of how long a homochiral sequence must be to result in solid phase formation. In this work, we designed chiral patterned peptides of polyglutamic acid and polylysine ranging from 50 to 90% L-chiral residues with increasing numbers of sequential L-chiral residues before a chirality change. These polymers were mixed together to form PECs. We observed that 8 or more sequential L-chiral residues are necessary to achieve both the appearance of a precipitate phase and sustained β-sheets in the complex, as determined by optical imaging and FTIR Spectroscopy. Less homochiral content results in formation of a coacervate phase. Thus, we show that chiral sequence can be used to control the phase transition of PECs. Understanding how to manipulate PEC phase using chiral sequence as presented here may enable tuning of the material properties to achieve the desired mechanical strength for coatings and polymer brushes, or the most effective molecular release kinetics for drug delivery applications, for example.     

Mechanical and Dynamic Stability of Complete and Nonstoichiometric 3<Emphasis Type="Italic">C</Emphasis>-Si<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>C<Subscript><Emphasis Type="Italic">y</Emphasis></Subscript> from Ab Initio Calculations

The energies of formation of vacancies in the carbon and silicon sublattices, the independent elastic constants, the all-round compression, shear and Young’s moduli, and the anisotropy coefficients are determined for the complete and nonstoichiometric cubic phases of 3C-Si_xC_y (x, y = 1.0–0.75) by ab initio methods of the band theory. In the formalism of the density functional perturbation theory (DFPT), the phonon dispersion dependences are obtained for these phases (the comparison with the experiment is given for the complete phase). It is shown that the mechanical characteristics of the phases become strongly anisotropic upon the transition from 3C-SiC_0.875 to 3C-SiC_0.75. It is established from the analysis of the phonon dispersion curves that the 3C-SiC_0.875 and 3C-SiC_0.75 phases, in contrast to the complete 3C-SiC phase, are dynamically unstable at T = 0 K.     

Enhancing the Trace Norm and Bures Norm Measurement-Induced Nonlocality in the Heisenberg XYZ Model

Nonlocality is one unique characteristic of quantum mechanics and an essential resource for quantum communication and computation. We investigate two measures of the well-defined geometric measurement-induced nonlocality (MIN) in the Heisenberg XYZ model, and found that considerable enhancement of the MINs can be achieved by tuning strength of the anisotropic parameter, the J_z coupling, and the Dzyaloshinsky-Moriya (DM) interaction of the model. Particularly, the maxima of the two MINs can be obtained when the strength of the J_z coupling or the DM interaction approaches infinity. We have also demonstrated the singular behaviors of the two MINs such as the nonunique states ordering and the sudden change behaviors.     

Phase Diagrams of Solid Solutions of Relaxor Ferroelectrics from the Dielectric Spectroscopy Data

The dielectric spectra of Pb(_1–z)Ba _z (Mg_1/3Nb_2/3) _m (Zn_1/3Nb_2/3) _y (Ni_1/3Nb_2/3) _n TixO₃ (x = 0.25–0.4, y = 0.1130–0.0842, m = 0.4844–0.1298, n = 0.1266–0.4726, z = 0–0.15) ceramics with substitution in both A and B crystallographic positions of the perovskite structure are studied. The system demonstrates a transition from the relaxor state to the normal ferroelectric state in both cases: when the concentration of lead titanate grows and the concentration of barium is reduced. On the basis of experimental results, the x–T and z–T phase diagrams are plotted. Despite different crystal chemical reasons of the relaxor state emergence in the investigated solid solutions, their diagrams demonstrate an evident similarity. We have revealed the disappearance of the temperature hysteresis at the transition to the relaxor state in both cases, which has allowed us to make an assumption of the existence of tricritical points on the corresponding diagrams.     

The giant volume magnetostriction and colossal magnetoresistance in Eu<Subscript>0.55</Subscript>Sr<Subscript>0.45</Subscript>MnO<Subscript>3</Subscript> manganite

A doped manganite with the composition Eu_0.55Sr_0.45MnO₃ exhibits giant negative magnetostriction and colossal negative magnetoresistance at temperatures in the vicinity of the magnetic phase transformation (T～41 K). In the temperature interval 4.2 K≤T ≤40 K, the isotherms of magnetization, volume magnetostriction, and resistivity exhibit jumps at the critical field strength H_c1, which decreases with increasing temperature. At 70 K ≤T ≤120 K, the jumps on the isotherms are retained, but the shapes of these curves change and the H_c1 value increases with the temperature. At H<H_c1, the magnetoresistance is positive and exhibits a maximum at 41 K; at H>H_c1, the magnetoresistance becomes negative, passes through a minimum near 41 K and then reaches a colossal value. The observed behavior is explained by the existence of three phases in Eu_0.55Sr_0.45MnO₃, including a ferromagnetic (in which the charge carriers concentrate due to a gain in the s-d exchange energy) and two antiferromagnetic phases (of the A and CE types). The volumes of these phases at low temperatures are evaluated. It is shown that the colossal magnetoresistance and the giant volume magnetostriction are related to the ferromagnetic phase formed as a result of the magnetic-field-induced transition of the CE-type antiferromagnetic phase to the ferromagnetic state.     

Die Hyperfeinstruktur in den 4f7 6s 6p-Termen des Eu I und die elektrischen Kernquadrupolmomente von Eu151 und Eu153

The hyperfine structure of the statesz ¹⁰ P _11/2,z ¹⁰ P _9/2,z ¹⁰ P _7/2,z ⁸ P _9/2,y ⁸ P _9/2,y ⁸ P _7/2,y ⁸ P _5/2,z ⁶ P _7/2,z ⁶ 6s P _5/2 of the 4f ⁷ 6p configuration of EuI was investigated with a photoelectric recording Fabry Perot spectrometer using enriched isotopes of Eu¹⁵¹ and Eu¹⁵³, which have been excited in liquid air cooled hollow cathodes. From the measurements the values for the nuclear quadrupole moments

$$Q(Eu^{151} ) = (1.16 \pm 0.08) \cdot 10^{ - 24} cm^2 $$     

Magnetic and orbital structures of manganites in the electron doping region

Total energies of various magnetic and orbital configurations of the La_1?yCa_yMnO₃ manganites were calculated for the electron doping region y>0.5 with inclusion of the manganese e_g level splitting. The state of the system was first established by total energy minimization in both the angle between the spins of neighboring Mn⁴⁺ ions and the two orbital-mixing angles defining the type of ordering in the system under study. The manganite phase diagrams constructed for T=0 correctly reproduce the alternation of magnetic orbitally ordered structures, which is experimentally observed to occur with increasing electron concentration in the region of actual values of the Heisenberg interatomic exchange parameter, the Hund exchange parameter, and the hopping integral.     

Testing the Distance-Duality Relation from Hubble,Galaxy Clusters and Type Ia Supernovae Data with Model Independent Methods

In this paper, we perform cosmological-model-independent tests for the distance-duality (DD) relation η(z)=D _L(1+z)^?2/D _A by combining the angular diameter distance D _A(or comoving distances D _c ) with the luminosity distance D _L. The D _A are provided by two galaxy clusters samples compiled by De Filippis et al. (the elliptical β model), Bonamente et al. (the spherical β model), the D _c are obtained from Hubble parameter data and D _L are given from the Union2.1 supernovae (SNe) Ia compilation. We employ two methods, i.e., method A: binning the SNe Ia data within the range Δz=|z?z _SNe|<0.005, and method B: reconstructing the D _L(z) by smoothing the noise of Union2.1 data set over redshift with the Gaussian smoothing function, to obtain D _L associated with the redshits of the observed D _A or D _c. Four parameterizations for η(z), i.e., η(z)=1+η ₀ z, η(z)=1+η ₀ z/(1+z), η(z)=1+η ₀ z/(1+z)² and η(z)=1?η ₀ ln(1+z), are adopted for the DD relation. We find that DD relation is consistent with the present observational data, and the results we obtained are not sensitive to the method and parameterization.     

Ordered phases of lithium nickelite Li<Subscript>1−<Emphasis Type="Italic">x</Emphasis>−<Emphasis Type="Italic">z</Emphasis></Subscript>Ni<Subscript>1+<Emphasis Type="Italic">x</Emphasis></Subscript>O<Subscript>2</Subscript>

A symmetry analysis of ordering in lithium nickelite Li_1?x?zNi_1+xO₂ (Li_1?x?z□_yNi_1+xO₂) was performed with regard to the substitution of Li and Ni atoms and the occurrence of structural vacancies □ in the metal sublattice. For all the ordered phases, the k ₉ ⁽³⁾ ray of the Lifshitz {k₉} star is present in the order-disorder transition channel. This ray determines the consecutive alternation of atomic planes filled with only Ni atoms or only Li atoms and vacancies in the \([1\bar 11]_{B1} \) direction. It was shown that the rhombohedral ordered LiNiO₂ phase is formed in the defect-free lithium nickelite, whereas a family of three monoclinic Li₃□Ni₄O₈ (C2/m space group) and Li₂□Ni₃O₆ (C2/m and C2 space groups) superstructures arises as the concentration of structural vacancies increases. For all the superstructures, the order-disorder phase-transition channels were determined and the distribution functions of Li and Ni atoms have been calculated. The long-range order parameters describing each superstructure were found as functions of the Li_{1?x? z}Ni_1+xO₂ composition.     

Electro-optical properties of strontium-barium niobate crystals and their relation to the domain structure of the crystals

The electro-optical coefficients r _ij and half-wave voltage V_λ/2 of strontium-barium niobate crystals poled in the ferroelectric phase are shown to vary along the polar axis. The r _ij (z) and V_λ/2(z) dependences indicate the presence of a residual domain density D(z) and clearly depend on the sign of the polarizing field, with r _ij being minimum (D being maximum) near the negative electrode. This character of the D(z) distribution and, hence, the r _ij (z) and V_λ/2(z) coordinate dependences can be explained by predominant domain nucleation near the negative electrode, which is revealed when the switching processes are studied using 90° (Rayleigh) light scattering from domain walls.     

Josephson effects in unconventional heavy fermion superconductors

We discuss the Josephson effect for pairing states which break crystal symmetries in addition to gauge symmetry. We consider theE _1g andE _2u models for the low-temperature phase ofUPt ₃, with order parameters Δ(E _1g )～p _z (p _x +ip _y ) and Δ(E _2u )～p _z (p _x +ip _y )². We report calculations of Josephson critical currents, taking into account the effects of depairing at the interface. For singlet-triplet junctions the critical current is non-zero only for spin-orbit, spin-flip tunneling, and is found to be much smaller than the Ambegaokar-Baratoff value even when the spin-orbit tunneling amplitude is comparable to the spin-independent amplitude.     

Conductance distribution near the Anderson transition

Using a modification of the Shapiro approach, we introduce the two-parameter family of conductance distributions W(g), defined by simple differential equations, which are in the one-to-one correspondence with conductance distributions for quasi-one-dimensional systems of size L ^d–1 × L _z , characterizing by parameters L/ξ and L _z /L (ξ is the correlation length, d is the dimension of space). This family contains the Gaussian and log-normal distributions, typical for the metallic and localized phases. For a certain choice of parameters, we reproduce the results for the cumulants of conductance in the space dimension d = 2 + ? obtained in the framework of the σ-model approach. The universal property of distributions is existence of two asymptotic regimes, log-normal for small g and exponential for large g. In the metallic phase they refer to remote tails, in the critical region they determine practically all distribution, in the localized phase the former asymptotics forces out the latter. A singularity at g = 1, discovered in numerical experiments, is admissible in the framework of their calculational scheme, but related with a deficient definition of conductance. Apart of this singularity, the critical distribution for d = 3 is well described by the present theory. One-parameter scaling for the whole distribution takes place under condition, that two independent parameters characterizing this distribution are functions of the ratio L/ξ.     

Chiral and deconfinement phase transitions in QED<Subscript>3</Subscript> with finite gauge boson mass

Based on the experimental observation that there is a coexisting region between the antiferromagnetic (AF) and d-wave superconducting (dSC) phases, the influences of gauge boson mass m _a on chiral symmetry restoration and deconfinement phase transitions in QED₃ are investigated simultaneously within a unified framework, i.e., Dyson–Schwinger equations. The results show that the chiral symmetry restoration phase transition in the presence of the gauge boson mass m _a is a typical second-order phase transition; the chiral symmetry restoration and deconfinement phase transitions are coincident; the critical number of fermion flavors N ^c _f decreases as the gauge boson mass m _a increases, which implies that there exists a boundary that separates the N ^c _f –m _a plane into chiral symmetry breaking/confinement region for (N ^c _f , m _a ) below the boundary and chiral symmetry restoration/deconfinement region for (N ^c _f , m _a ) above it.     

Extreme Electromechanical Characteristics and Microstructural Features of Ferro-Piezoceramics Based on Lead Titanate

Microstructural features and electrophysical parameters of a number of solid solutions based on PbTiO₃ are investigated. Solid solutions (Pb_{1–3/2x + z/2}Nd _x )(Ti_1–y–zMn _y Inz)O₃ and Pb_1–xCa _x Ti_1–y(W_1/2Co_1/2) _y O₃ with extreme values of the mechanical Q-factor and electromechanical anisotropy are chosen as the objects of investigation. The ferro-piezoceramic samples are obtained through conventional sintering and hot pressing. X-ray structural and microstructural studies are performed, and the complex elastic, dielectric, and piezoelectric parameters of experimental samples are measured. The frequency dependences of complex parameters of the experimental samples have been studied at frequencies of up to 40 MHz. It is established that the extreme values of the mechanical Q-factor and piezoelectric anisotropy of the investigated PbTiO₃-based solid solutions are due to microstructural features associated with the technological regimes of ferropiezoceramic fabrication.