Solid energy calibration standards for P K‐edge XANES: electronic structure analysis of PPh4Br

P K‐edge X‐ray absorption near‐edge structure (XANES) spectroscopy is a powerful method for analyzing the electronic structure of organic and inorganic phosphorus compounds. Like all XANES experiments, P K‐edge XANES requires well defined and readily accessible calibration standards for energy referencing so that spectra collected at different beamlines or under different conditions can be compared. This is especially true for ligand K‐edge X‐ray absorption spectroscopy, which has well established energy calibration standards for Cl (Cs₂CuCl₄) and S (Na₂S₂O₃·5H₂O), but not neighboring P. This paper presents a review of common P K‐edge XANES energy calibration standards and analysis of PPh₄Br as a potential alternative. The P K‐edge XANES region of commercially available PPh₄Br revealed a single, highly resolved pre‐edge feature with a maximum at 2146.96 eV. PPh₄Br also showed no evidence of photodecomposition when repeatedly scanned over the course of several days. In contrast, we found that PPh₃ rapidly decomposes under identical conditions. Density functional theory calculations performed on PPh₃ and PPh₄⁺ revealed large differences in the molecular orbital energies that were ascribed to differences in the phosphorus oxidation state (III versus V) and molecular charge (neutral versus +1). Time‐dependent density functional theory calculations corroborated the experimental data and allowed the spectral features to be assigned. The first pre‐edge feature in the P K‐edge XANES spectrum of PPh₄Br was assigned to P 1s → P‐C π* transitions, whereas those at higher energy were P 1s → P‐C σ*. Overall, the analysis suggests that PPh₄Br is an excellent alternative to other solid energy calibration standards commonly used in P K‐edge XANES experiments.     

Electronic structure effects on B K‐edge XANES of minerals

In order to assess the usability of X‐ray absorption near‐edge structure (XANES) for studying the structure of BO_n‐containing materials, the dependence of theoretical XANES at the B K‐edge on the way the scattering potential is constructed is investigated. Real‐space multiple‐scattering calculations are performed for self‐consistent and non‐self‐consistent potentials and for different ways of dealing with the core hole. It is found that in order to reproduce the principal XANES features it is sufficient to use a non‐self‐consistent potential with a relaxed and screened core hole. Employing theoretical modelling of XANES for studying the structure of boron‐containing glasses is thus possible. The core hole affects the spectrum significantly, especially in the pre‐edge region. In contrast to minerals, B K‐edge XANES of BPO₄ can be reproduced only if a self‐consistent potential is employed.     

X‐ray Raman spectroscopy of lithium‐ion battery electrolyte solutions in a flow cell

The effects of varying LiPF₆ salt concentration and the presence of lithium bis(oxalate)borate additive on the electronic structure of commonly used lithium‐ion battery electrolyte solvents (ethylene carbonate–dimethyl carbonate and propylene carbonate) have been investigated. X‐ray Raman scattering spectroscopy (a non‐resonant inelastic X‐ray scattering method) was utilized together with a closed‐circle flow cell. Carbon and oxygen K‐edges provide characteristic information on the electronic structure of the electrolyte solutions, which are sensitive to local chemistry. Higher Li⁺ ion concentration in the solvent manifests itself as a blue‐shift of both the π* feature in the carbon edge and the carbonyl π* feature in the oxygen edge. While these oxygen K‐edge results agree with previous soft X‐ray absorption studies on LiBF₄ salt concentration in propylene carbonate, carbon K‐edge spectra reveal a shift in energy, which can be explained with differing ionic conductivities of the electrolyte solutions.     

Relationship between the structural distortion and the Mn electronic state in La1−xCaxMnO3: a Mn K‐edge XANES study

A theoretical study of the X‐ray absorption near‐edge structure (XANES) spectra at the Mn K‐edge in the La_1?xCa_xMnO₃ series is reported. The relationship between the edge shift, the Ca–La substitution and the distortion of the MnO₆ octahedra in these systems has been studied. It is shown that, by correctly considering these effects simultaneously, the experimental XANES data are consistent with the presence of two different Mn local environments in the intermediate La_1?xCa_xMnO₃ compounds. By taking into account the energy shift associated with the modification of the MnO₆ distortion as Ca substitutes for La, it is possible to reproduce the XANES spectra of the intermediate‐doped compounds starting from the experimental spectra of the end‐members LaMnO₃ and CaMnO₃. These results point out the need to re‐examine the conclusions derived in the past from the simple analysis of the Mn K‐edge XANES edge‐shift in these materials. In particular, it is shown that the modification of the Mn K‐edge absorption through the La_1?xCa_xMnO₃ series is well reproduced by considering the simultaneous presence of both distorted and undistorted octahedra and, consequently, that the existence of charge‐ordering phenomena cannot be ruled out from the XANES data.     

Effect of gamma irradiation on X‐ray absorption and photoelectron spectroscopy of Nd‐doped phosphate glass

X‐ray absorption near‐edge structure (XANES) and X‐ray photoelectron spectroscopy (XPS) of Nd‐doped phosphate glasses have been studied before and after gamma irradiation. The intensity and the location of the white line peak of the L₃‐edge XANES of Nd are found to be dependent on the ratio O/Nd in the glass matrix. Gamma irradiation changes the elemental concentration of atoms in the glass matrix, which affects the peak intensity of the white line due to changes in the covalence of the chemical bonds with Nd atoms in the glass (structural changes). Sharpening of the Nd 3d_5/2 peak profile in XPS spectra indicates a deficiency of oxygen in the glasses after gamma irradiation, which is supported by energy‐dispersive X‐ray spectroscopy measurements. The ratio of non‐bridging oxygen to total oxygen in the glass after gamma radiation has been found to be correlated to the concentration of defects in the glass samples, which are responsible for its radiation resistance as well as for its coloration.     

Scanning transmission X‐ray microscopy probe for in situ mechanism study of graphene‐oxide‐based resistive random access memory

Here, an in situ probe for scanning transmission X‐ray microscopy (STXM) has been developed and applied to the study of the bipolar resistive switching (BRS) mechanism in an Al/graphene oxide (GO)/Al resistive random access memory (RRAM) device. To perform in situ STXM studies at the C K‐ and O K‐edges, both the RRAM junctions and the I₀ junction were fabricated on a single Si₃N₄ membrane to obtain local XANES spectra at these absorption edges with more delicate I₀ normalization. Using this probe combined with the synchrotron‐based STXM technique, it was possible to observe unique chemical changes involved in the BRS process of the Al/GO/Al RRAM device. Reversible oxidation and reduction of GO induced by the externally applied bias voltages were observed at the O K‐edge XANES feature located at 538.2 eV, which strongly supported the oxygen ion drift model that was recently proposed from ex situ transmission electron microscope studies.     

First principle study of the cation vacancy in anatase TiO2

Based on first principle FP‐LAPW calculations, we have studied the electronic and magnetic properties of anatase TiO₂ with Ti cation vacancy. We find that the Ti cation vacancy defect can induce a magnetic moment of about 4μ_B/supercell. The magnetic moment mainly comes from p‐orbitals of O atoms which surround the Ti vacancy. We also find that the two Ti vacancies in anatase always coupled ferromagnetically. (© 2008 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Effect of atomic vibrations in XANES: polarization‐dependent damping of the fine structure at the Cu K‐edge of (creat)2CuCl4

Polarization‐dependent damping of the fine structure in the Cu K‐edge spectrum of creatinium tetrachlorocuprate [(creat)₂CuCl₄] in the X‐ray absorption near‐edge structure (XANES) region is shown to be due to atomic vibrations. These vibrations can be separated into two groups, depending on whether the respective atoms belong to the same molecular block; individual molecular blocks can be treated as semi‐rigid entities while the mutual positions of these blocks are subject to large mean relative displacements. The effect of vibrations can be efficiently included in XANES calculations by using the same formula as for static systems but with a modified free‐electron propagator which accounts for fluctuations in interatomic distances.     

First XANES evidence of a disorder–order transition in a spinel ferrite compound: nanocrystalline ZnFe2O4

In situ Zn K‐edge XANES experiments were performed to investigate the thermal evolution of the non‐equilibrium state in nano‐sized ZnFe₂O₄. The initially disordered ferrite was annealed under oxygen atmosphere and kept at temperatures of 673, 773 and 873 K. Modifications of the XANES features allowed the direct detection of the Zn local surrounding changes from O_h to T_d symmetry. Quantitative analyses of these results were performed by using the principal‐component analysis approach. The ferrite inversion does not change until the activation barrier is overcome at T_a = 585 K. Above T_a, the Zn ions continuously change their environment to their normal equilibrium state. Isothermal treatments confirm that the Zn transference follows a first‐order kinetic process. In addition, the thermal treatment produces a partial recrystallization that increases the average grain size from 13 to 50 nm and reduces the microstrain. The room‐temperature magnetic state changes from ferrimagnetic to paramagnetic, while the blocking temperature increases after the treatment.     

Phosphorus L2,3‐edge XANES: overview of reference compounds

Synchrotron‐based X‐ray absorption near‐edge structure (XANES) spectroscopy is becoming an increasingly used tool for the element speciation in complex samples. For phosphorus (P) almost all XANES measurements have been carried out at the K‐edge. The small number of distinctive features at the P K‐edge makes in some cases the identification of different P forms difficult or impossible. As indicated by a few previous studies, the P L_2,3‐edge spectra were richer in spectral features than those of the P K‐edge. However, experimentally consistent spectra of a wide range of reference compounds have not been published so far. In this study a library of spectral features is presented for a number of mineral P, organic P and P‐bearing minerals for fingerprinting identification. Furthermore, the effect of radiation damage is shown for three compounds and measures are proposed to reduce it. The spectra library provided lays a basis for the identification of individual P forms in samples of unknown composition for a variety of scientific areas.     

Soft X‐ray characterization technique for Li batteries under operating conditions

O K‐edge and Co L‐edge near‐edge X‐ray absorption fine structure has been used to examine the cathode of an intact solid‐state lithium ion battery. The novel technique allowed for the simultaneous acquisition of partial electron yield and fluorescence yield data during the first charge cycle of a LiCoO₂‐based battery below the intercalation voltage. The chemical environments of oxygen and cobalt at the surface are shown to differ chemically from those in the bulk. The present design enables a wide variety of in situ spectroscopies, microscopies and scattering techniques.     

X‐ray absorption study of the local structure at the NiO/oxide interfaces

This work reports an X‐ray absorption near‐edge structure (XANES) spectroscopy study at the Ni K‐edge in the early stages of growth of NiO on non‐ordered SiO₂, Al₂O₃ and MgO thin films substrates. Two different coverages of NiO on the substrates have been studied. The analysis of the XANES region shows that for high coverages (80 Eq‐ML) the spectra are similar to that of bulk NiO, being identical for all substrates. In contrast, for low coverages (1 Eq‐ML) the spectra differ from that of large coverages indicating that the local order around Ni is limited to the first two coordination shells. In addition, the results also suggest the formation of cross‐linking bonds Ni—O—M (M = Si, Al, Mg) at the interface.     

First‐principles study on the concentrations of native point defects in high‐dielectric‐constant binary oxide materials

The intrinsic concentrations of point defects in high‐k binary oxide materials of HfO₂, ZrO₂, Y₂O₃ and La₂O₃ are evaluated on the basis of first‐principles calculations. Oxygen defects are found to dominate over a wide range of the oxygen chemical potential. Neutral oxygen vacancies are likely to be responsible for electron trapping in the investigated materials. In HfO₂ and ZrO₂, oxygen Frenkel pairs are likely to form. (© 2008 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Extended X‐ray absorption fine structure and multiple‐scattering simulation of nickel dithiolene complexes Ni[S2C2(CF3)2]2n (n = −2, −1, 0) and an olefin adduct Ni[S2C2(CF3)2]2(1‐hexene)

A series of Ni dithiolene complexes Ni[S₂C₂(CF₃)]₂ⁿ (n = ?2, ?1, 0) ( 1 , 2 , 3 ) and a 1‐hexene adduct Ni[S₂C₂(CF₃)₂]₂(C₆H₁₂) ( 4 ) have been examined by Ni K‐edge X‐ray absorption near‐edge structure (XANES) and extended X‐ray absorption fine‐structure (EXAFS) spectroscopies. Ni XANES for 1 – 3 reveals clear pre‐edge features and approximately +0.7 eV shift in the Ni K‐edge position for `one‐electron' oxidation. EXAFS simulation shows that the Ni—S bond distances for 1 , 2 and 3 (2.11–2.16 Å) are within the typical values for square planar complexes and decrease by ～0.022 Å for each `one‐electron' oxidation. The changes in Ni K‐edge energy positions and Ni—S distances are consistent with the `non‐innocent' character of the dithiolene ligand. The Ni—C interactions at ～3.0 Å are analyzed and the multiple‐scattering parameters are also determined, leading to a better simulation for the overall EXAFS spectra. The 1‐hexene adduct 4 presents no pre‐edge feature, and its Ni K‐edge position shifts by ?0.8 eV in comparison with its starting dithiolene complex 3 . Consistently, EXAFS also showed that the Ni—S distances in 4 elongate by ～0.046 Å in comparison with 3 . The evidence confirms that the neutral complex is `reduced' upon addition of olefin, presumably by olefin donating the π‐electron density to the LUMO of 3 as suggested by UV/visible spectroscopy in the literature.     

Reference spectra of important adsorbed organic and inorganic phosphate binding forms for soil P speciation using synchrotron‐based K‐edge XANES spectroscopy

Direct speciation of soil phosphorus (P) by linear combination fitting (LCF) of P K‐edge XANES spectra requires a standard set of spectra representing all major P species supposed to be present in the investigated soil. Here, available spectra of free‐ and cation‐bound inositol hexakisphosphate (IHP), representing organic P, and of Fe, Al and Ca phosphate minerals are supplemented with spectra of adsorbed P binding forms. First, various soil constituents assumed to be potentially relevant for P sorption were compared with respect to their retention efficiency for orthophosphate and IHP at P levels typical for soils. Then, P K‐edge XANES spectra for orthophosphate and IHP retained by the most relevant constituents were acquired. The spectra were compared with each other as well as with spectra of Ca, Al or Fe orthophosphate and IHP precipitates. Orthophosphate and IHP were retained particularly efficiently by ferrihydrite, boehmite, Al‐saturated montmorillonite and Al‐saturated soil organic matter (SOM), but far less efficiently by hematite, Ca‐saturated montmorillonite and Ca‐saturated SOM. P retention by dolomite was negligible. Calcite retained a large portion of the applied IHP, but no orthophosphate. The respective P K‐edge XANES spectra of orthophosphate and IHP adsorbed to ferrihydrite, boehmite, Al‐saturated montmorillonite and Al‐saturated SOM differ from each other. They also are different from the spectra of amorphous FePO₄, amorphous or crystalline AlPO₄, Ca phosphates and free IHP. Inclusion of reference spectra of orthophosphate as well as IHP adsorbed to P‐retaining soil minerals in addition to spectra of free or cation‐bound IHP, AlPO₄, FePO₄ and Ca phosphate minerals in linear combination fitting exercises results in improved fit quality and a more realistic soil P speciation. A standard set of P K‐edge XANES spectra of the most relevant adsorbed P binding forms in soils is presented.     

An unconventional method for measuring the Tc L3‐edge of technetium compounds

Tc L₃‐edge XANES spectra have been collected on powder samples of SrTcO₃ (octahedral Tc⁴⁺) and NH₄TcO₄ (tetrahedral Tc⁷⁺) immobilized in an epoxy resin. Features in the Tc L₃‐edge XANES spectra are compared with the pre‐edge feature of the Tc K‐edge as well as other 4d transition metal L₃‐edges. Evidence of crystal field splitting is obvious in the Tc L₃‐edge, which is sensitive to the coordination number and oxidation state of the Tc cation. The Tc L₃ absorption edge energy difference between SrTcO₃ (Tc⁴⁺) and NH₄TcO₄ (Tc⁷⁺) shows that the energy shift at the Tc L₃‐edge is an effective tool for studying changes in the oxidation states of technetium compounds. The Tc L₃‐edge spectra are compared with those obtained from Mo and Ru oxide standards with various oxidation states and coordination environments. Most importantly, fitting the Tc L₃‐edge to component peaks can provide direct evidence of crystal field splitting that cannot be obtained from the Tc K‐edge.     

Oxygen vacancy induced ferromagnetism in rutile TiO2–x

First‐principles LDA + U calculations have been performed to study the effects of oxygen vacancies (V_O) on the electronic structure and magnetism in undoped rutile TiO_2–x . Instead of treated as an adjustive parameter, the value of U was determined by constrained‐density‐functional calculations. The calculated electronic structure reveals that the valence electrons released by V_O would occupy mainly the neighboring Ti:3d orbital which then becomes spin‐polarized due to intra‐atomic exchange interaction, thereby giving rise to the half‐metallic ferromagnetism. The magnetization induced by V_O in rutile TiO_2–x is almost proportional to the V_O concentration (x) for x > 0.0625, and becomes 0 for x ≤ 0.0417. (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

An X‐ray Raman spectrometer for EXAFS studies on minerals: bent Laue spectrometer with 20 keV X‐rays

An X‐ray Raman spectrometer for studies of local structures in minerals is discussed. Contrary to widely adopted back‐scattering spectrometers using ≤10 keV X‐rays, a spectrometer utilizing ～20 keV X‐rays and a bent Laue analyzer is proposed. The 20 keV photons penetrate mineral samples much more deeply than 10 keV photons, so that high intensity is obtained owing to an enhancement of the scattering volume. Furthermore, a bent Laue analyzer provides a wide band‐pass and a high reflectivity, leading to a much enhanced integrated intensity. A prototype spectrometer has been constructed and performance tests carried out. The oxygen K‐edge in SiO₂ glass and crystal (α‐quartz) has been measured with energy resolutions of 4 eV (EXAFS mode) and 1.3 eV (XANES mode). Unlike methods previously adopted, it is proposed to determine the pre‐edge curve based on a theoretical Compton profile and a Monte Carlo multiple‐scattering simulation before extracting EXAFS features. It is shown that the obtained EXAFS features are reproduced fairly well by a cluster model with a minimal set of fitting parameters. The spectrometer and the data processing proposed here are readily applicable to high‐pressure studies.     

K‐edge XANES analysis of sulfur compounds: an investigation of the relative intensities using internal calibration

Sulfur K‐edge XANES (X‐ray absorption near‐edge structure) spectroscopy is an excellent tool for determining the speciation of sulfur compounds in complex matrices. This paper presents a method to quantitatively determine the kinds of sulfur species in natural samples using internally calibrated reference spectra of model compounds. Owing to significant self‐absorption of formed fluorescence radiation in the sample itself the fluorescence signal displays a non‐linear correlation with the sulfur content over a wide concentration range. Self‐absorption is also a problem at low total absorption of the sample when the sulfur compounds are present as particles. The post‐edge intensity patterns of the sulfur K‐edge XANES spectra vary with the type of sulfur compound, with reducing sulfur compounds often having a higher post‐edge intensity than the oxidized forms. In dilute solutions (less than 0.3–0.5%) it is possible to use sulfur K‐edge XANES reference data for quantitative analysis of the contribution from different species. The results show that it is essential to use an internal calibration system when performing quantitative XANES analysis. Preparation of unknown samples must take both the total absorption and possible presence of self‐absorbing particles into consideration.     

Development of micro‐XANES mapping in the diamond anvil cell

Energy‐dispersive X‐ray absorption spectroscopy is now a well established method that has been applied to a broad range of applications. At the energy‐dispersive EXAFS beamline of the ESRF, ID24, the recently achieved 5 × 5 µm focal spot combined with fast acquisition has allowed complex and non‐uniform samples to be mapped and images to be obtained where each pixel contains full XAS information. This method has been applied to a study under extreme conditions of pressure and temperature in a diamond anvil cell in transmission mode. The case study was the investigation of the Fe K‐edge XANES of (Mg,Fe)SiO₃‐perovskite and (Mg,Fe)O‐ferropericlase on decomposition of the spinel‐structured olivine [γ‐(Mg,Fe)₂SiO₄] at 78 (3) GPa after laser heating at 2200 (100) K.