An analysis of the factors affecting the peak shape and the quantitative reliability of a heat flux DSC cell

In a previous work it was shown that unexpected problems may arise in the calibration of a heat flux DSC cell. To understand the origin of these problems an analysis has been undertaken of what happens in the cell before, during and after the peak. Here the first part of this analysis is reported dealing with the baseline and with the dependence of the recorded signal on time. Analytical expressions are obtained connecting the measured signal with experimental variables and instrument constants. Completely independent on sample related properties, a maximum measurable ΔT is introduced as limiting factor for quantitative reliability.     

Correlation analysis of cone calorimetry test data assessment of the procedure with tests of different polymers

Correlation algorithms are used to analyse the relationship amongst heat release rate, carbon dioxide and carbon monoxide generated in cone calorimetry test of material flammability. These correlation algorithms include Pearson??s correlation, Spearman??s rank correlation and Kendall??s rank correlation. Cone test data of seven materials are analysed. These materials are two kinds of polyvinyl chloride wall panel, glass-reinforced plastics, vinyl panel, polymethyl methacrylate, polyurethane and two types of expanded polystyrene foam. Correlation coefficients are calculated for cone calorimeter results from tests at 50?kW?m^?2 of these materials. The distribution of the coefficients would be used to discriminate the test materials according to the so-called FO-categories which can help to predict the time to flashover.     

A simple procedure for the chromatographic analysis of nanoliter samples

A simple method for the analysis of nanoliter droplets is proposed, which is profitable when larger samples cannot be collected as, for instance, in the case of several biological fluids and particularly in clinical chemistry. A glass capillary associated to a micromanipulator is used to collect submicroliter volumes which are partially transferred into transparent polymeric tubings with known internal diameters (120–178 μm), where the volumes sampled are measured by meniscus collimations with a collimator microscope at suitable magnification. Both ends of these tubings are preliminarily equipped with ferrules and fittings, so as to make them suitable for connection as the loop to a conventional high-pressure injection valve. The reliability of this procedure has been tested for the analysis of Na⁺, K⁺ and Ca²⁺ present in minute synthetic standard samples (10–200 nL) by a conventional ion-chromatographic instrumentation. Relative standard deviations in peak area measurements (5–6%) are discussed in terms of the whole approximation affecting volume measurements, which depends on both the inconstancy of the inner diameter of the polymeric tubings employed and the uncertainty characterizing meniscus collimations. The proposed procedure can be easily extended to the determination of any organic or inorganic species present in very small samples, provided that their detection can be achieved by any chromatographic approach or, more generally, by flow injection analysis. Received: 16 June 1997 / Revised: 12 August 1997 / Accepted: 14 August 1997     

A simple procedure for the chromatographic analysis of nanoliter samples

A simple method for the analysis of nanoliter droplets is proposed, which is profitable when larger samples cannot be collected as, for instance, in the case of several biological fluids and particularly in clinical chemistry. A glass capillary associated to a micromanipulator is used to collect submicroliter volumes which are partially transferred into transparent polymeric tubings with known internal diameters (120–178 μm), where the volumes sampled are measured by meniscus collimations with a collimator microscope at suitable magnification. Both ends of these tubings are preliminarily equipped with ferrules and fittings, so as to make them suitable for connection as the loop to a conventional high-pressure injection valve. The reliability of this procedure has been tested for the analysis of Na⁺, K⁺ and Ca²⁺ present in minute synthetic standard samples (10–200 nL) by a conventional ion-chromatographic instrumentation. Relative standard deviations in peak area measurements (5–6%) are discussed in terms of the whole approximation affecting volume measurements, which depends on both the inconstancy of the inner diameter of the polymeric tubings employed and the uncertainty characterizing meniscus collimations. The proposed procedure can be easily extended to the determination of any organic or inorganic species present in very small samples, provided that their detection can be achieved by any chromatographic approach or, more generally, by flow injection analysis.     

DSC analysis of human synovial fluid samples in the diagnostics of non-septic and septic arthritis

The synovial fluid analysis is an important method in diagnosing and managing septic arthritis. To reach a quick diagnosis, preferably faster than the microbiological cultures, could be a great advantage in the therapy. The differential scanning calorimetry (DSC) has recently been found useful in the differential diagnosis of septic and non-septic periprosthetic conditions. The aim of this study was to evaluate whether there is a specific pattern in the different grades of arthritis, and the effect of three different bacterial strains inoculated in synovial fluid. The sensitivity of our method was also determined by using synovial fluid samples with the different bacterial concentrations. Authors developed a standardized, experimental model to assess the denaturation characteristics of non-septic and inoculated synovial fluid, infected by different bacterial strains. The thermal characteristics [maximal denaturation temperature (T _m) and calorimetric enthalpy change (ΔH _cal)] were monitored by SETARAM Micro DSC-II calorimeter. The denaturation scans clearly demonstrated specific, representative curves in the case of different grades of arthritis, as well as with each individual bacterial strain. Therefore, thermoanalyses of human synovial fluid samples by DSC could be a useful tool in the staging of osteoarthritis and the diagnostics of septic arthritis.     

Computer-assisted automatic peak recognition and result evaluation for analysis of chlorinated hydrocarbons in environmental samples

A data manipulation method has been developed for automatic peak recognition and result evaluation in the analysis of organic chlorinated hydrocarbons with dual-column gas chromatography. Based on the retention times of two internal standards, pentachlorotoluene and decachlorobiphenyl, the retention times of chlorinated hydrocarbons can be calibrated automatically and accurately. It is very convenient to identify the peaks by comparing the retention times of samples with the calibrated retention times calculated from the relative retention indices of standards. Meanwhile, with a suggested two-step evaluation method the evaluation coefficients and the suitable quantitative results of each component can be automatically achieved for practical samples in an analytical system using two columns with different polarities and two internal standards.     

Rapid procedure for the isolation and analysis of fatty acid and fatty alcohol fractions from wax esters of marine zooplankton

A rapid and simple method for the isolation of fatty acid methyl esters and fatty alcohols from the lipid fraction of marine zooplankton is described. Wax esters are the dominant lipid class in most calanoid copepods and trans-esterification results in a high fatty alcohol content in the analytical extract. Current procedures for the separation and purification of lipid classes by preparative thin-layer chromatography are time-consuming and are subject to low recovery of the analytes. In this method, fatty acid methyl esters and fatty alcohols were separated by liquid chromatography using silica or honded amino-silica as the stationary phase. The procedure is equally applicable to the analysis of zooplankton with low wax ester (and hence fatty alcohol) content, for example, a number of species of euphausiid and, generally, for samples of low mass.     

Mineralization procedure for use with the fluorometric determination of zinc in biological samples

Several minerelization procedures have been evaluated for use in conjunction with a method to determine zinc in milk, eggs, water and whole diets, based on the formation and extraction into diethyl ether, of Zn-5,7-dibromo-8-quinolinol. The results were compared with the known contents of standard samples or those obtained by flame atomic-absorption spectrometry. The most satisfactory procedure employed digestion with acid mixtures to destroy organic matter, and yielded a detection limit of 0.3 mg/kg for Zn.     

A neutron activation analysis procedure for the determination of uranium,thorium and potassium in geologic samples

A neutron activation analysis procedure was developed for the determination of uranium, thorium and potassium in basic and ultrabasic rocks. The three elements are determined in the same 0.5-g sample following a 30-min irradiation in a thermal neutron flux of 2·10¹² n·cm^?2·sec^?1. Following radiochemical separation, the nuclides²³⁹U (T=23.5 m),²³³Th (T=22.2 m) and⁴²K (T=12.36 h) are measured by β-counting. A computer program is used to resolve the decay curves which are complex owing to contamination and the growth of daughter activities. The method was used to determine uranium, throium and potassium in the U. S. Geological Survey standard rocks DTS-1, PCC-1 and BCR-1. For 0.5-g samples the limits of detection for uranium, throium and potassium are 0.7, 1.0 and 10 ppb, respectively.     

Determination of piceid by photochemically induced fluorescence and second-derivative: response surface methodology for the optimization of a liquid-liquid extraction procedure for its analysis in wine samples

trans-Piceid itself is weakly fluorescent, but the fluorescence signal (lambda(exc/em)=260/361nm) is greatly enhanced by UV-irradiation of its hydroethanolic solutions. Employing the photoinduced emission signal at 361nm or the amplitude of the second-derivative-photoinduced emission spectrum, between 353 and 361nm, a linear relation is found in the assayed range 5.7-31.4ngmL(-1) of trans-piceid and limits of detection of 1.7 and 2.1ngmL(-1), respectively, are obtained. A previous liquid-liquid extraction is necessary for the determination of piceid in wine. Experimental design (Central Composite Design) together with the Response Surface Methodology have been used to find optimum conditions for the extraction procedure. For this purpose, the difference between the photoinduced-fluorescence signal (lambda(exc/em)=260/361nm) of the aqueous phase, before and after being extracted, has been considered as Response Function. A tartrate buffer (pH 5.0) concentration of 0.15molL(-1) and a phase ratio of 1 are determined as optimum conditions. The amplitude of the second-derivative-emission spectrum, corresponding to the evaporated and re-dissolved organic phase, between 353 and 361nm has been employed as analytical signal. Standard addition method has been applied to the analysis of piceid in different wine samples under optimum conditions. Results of wine analysis have been satisfactorily validated by HPLC.     

Development of a procedure for the determination of chromium in samples of urine and serum by neutron activation analysis

Summary Since the mid-fifties the possibility of a causal relationship between deficient chromium and insulin metabolism and the manifestation of certain varieties of diabetes mellitus has been presumed. The determination of the chromium status under pathophysiological conditions may be helpful for the study of this problem. For these purposes an analytical procedure as reference system was developed which allows the determination of chromium in biological matrices down to the concentration of 0.03 ng/ml. It is based on NAA and is used in the framework of a commonly used procedure based on GF-AAS. For its application blood and urine samples are freeze-dried and irradiated. After wet digestion with HNO₃ in a microwave combustion system chromium is separated for measurement from the matrix nuclides with the help of the ion-exchanger Cellex-P. The individual steps of the procedure were evaluated by means of tracer experiments.Dedicated to Professor Dr. V. Krivan on the occasion of his 60th birthday.     

Development of a procedure for the multiresidue analysis of pesticides in vineyard soils and its application to real samples

A procedure for multiresidue analysis was developed for the extraction and determination of 17 pesticides, including herbicides, fungicides, and insecticides, as well as certain degradation products, in vineyard soils from La Rioja region (Spain). Different solvents and mixtures were tested in spiked pesticide‐free soils, and pesticides were comparatively evaluated by gas chromatography with mass spectrometry and liquid chromatography with mass spectrometry. Recoveries >70%, with relative standard deviations <9%, were obtained when a mixture of methanol/acetone or a mixture of methanol/CaCl₂ 0.01 M for the most polar compounds was selected as the extraction solvent. Method validation was accomplished with acceptable linearity (r² ≥ 0.987) within the concentration range of 0.005–1 μg/mL corresponding to 1.667–333.4 μg/kg and 0.835–167.1 μg/kg for liquid chromatography with mass spectrometry and gas chromatography with mass spectrometry, respectively, and detection limits <0.4 μg/kg for the compounds were studied. The extraction method was applied to 17 real vineyard soil samples, and terbuthylazine and its metabolite desethylterbuthylazine were the most ubiquitous compounds, as they were detected in the 100% of the soils analyzed. The presence of fungicides was also high, and the presence of insecticides was lower than other pesticides. The results confirm the usefulness of the optimized procedure for monitoring residues in vineyard soils.     

A pre-enrichment procedure using diethyldithiocarbamate-modified TiO2 nanoparticles for the analysis of biological and natural water samples by ICP-AES

In this article, a new method that utilizes a diethyldithiocarbamate-modified nanometre TiO₂ (TiO₂–DDTC) as solid-phase extractant has been developed for simultaneous preconcentration of trace Cu(II), Pb(II), Zn(II), and Cd(II) prior to measurement by inductively coupled plasma atomic emission spectrometry (ICP-AES). The separation/preconcentration conditions of analytes, which include the effects of pH, sample flow rate and volume, elution conditions, and interfering ions on the recovery of the analytes, were investigated. At pH 5, the adsorption capacity of modified nanometre TiO₂–DDTC was found to be 6.2, 19, 4.7, and 6.0?mg/g for Cu(II), Pb(II), Zn(II), and Cd(II), respectively. According to the definition of IUPAC, the detection limits (3σ) of this method for Cu(II), Pb(II), Zn(II), and Cd(II) were 0.41, 1.7, 0.39, and 0.52?ng/mL, respectively. The proposed method achieved satisfied results when applied to the determinations of trace Cu(II), Pb(II), Zn(II), and Cd(II) in biological and natural water samples.     

Multi-residue procedure for the analysis of pesticides in groundwater: Application to samples from the comunidad Valenciana,Spain

Summary A simple multi-residue procedure has been developed and applied to the analysis of pesticides in groundwater samples from the Comunidad Valenciana, a predominantly agricultural area on the Mediterranean coast of Spain. The procedure includes a liquid-liquid extraction, after addition of NaCl on the samples, and a subsequent analysis by capillary gas chromatography using a dual detection system with electron capture and nitrogen-phosphorous detectors. This allows the determination of more than 30 compounds (organophosphorous, organochlorine and pyrethroid pesticides) at the low ppb (g l^–1) levels. Detection limits obtained varied between 0.01 g l^–1 (lindane, fonofos) and 0.5 g l^–1 (cypermethrin). An additional injection of the sample extracts into a gas chromatograph equipped with a column of different polarity and electron capture detector is used for the confirmation of chromatographic peaks. The recommended procedure has been applied to 66 ground water samples. Pesticides, including organophosphorus and organochlorine compounds were detected in 31 of them, in levels ranging from 0.02 to 0.7 g l^–1.     

Monte Carlo simulations for predicting the precision of results and for optimizing data acquisition schedules

Monte Carlo simulations can be used to determine the precision of an analytical method if the standard deviations of the component unit operations are estimated accurately. Alternative methods for estimating the standard deviation have been compared by evaluating the success of Monte Carlo simulations to predict the precision of a second-order rate constant determined by spectrophotometry and of an equivalent weight and acid dissociation constant determined by potentiometry. Monte Carlo simulation has also been used with simplex optimization to predict a data acquisition schedule which gives high precision in the equivalent weight determination. By comparison with a naive design, a 22-fold improvement was predicted. A 15-fold improvement was observed experimentally.     

Determination of aflatoxins in grains and raw peanuts by a rapid procedure with fluorometric analysis

A rapid, quantitative, inexpensive, and efficient method was developed to determine aflatoxins in corn, corn meal, popcorn, rice, wheat, cottonseed, and peanuts. Samples are ground and extracted with methanol-water (80 + 20). A portion of the extract is cleaned up by passage through a solid-phase separatory column, 500 microL purified extract is derivatized with a bromine reagent, and fluorescence of the solution is immediately quantified with a calibrated fluorometer containing a broad wavelength pulsed xenon light source. This method can quantify aflatoxin from 5 to 5000 ppb without dilution and was linear when applied to samples of noncontaminated corn spiked at 0 to 5000 micrograms aflatoxin B1/g. Correlation coefficients of the method with LC for multiple analyses for corn (n = 34), cottonseed (n = 32), and peanuts (n = 11) were 0.999, 0.995, and 0.980, respectively. Individual analyses may be conducted in less than 5 min, and grouping of samples is unnecessary. The sensitivity of the method for corn is 5 ppb and the fluorometer, under the operating conditions, has a limit of detection of 0.6 ng aflatoxin B1.     

Standard operating procedure for the collection and preparation of voucher plant specimens for use in the nutraceutical industry

A vital part of the development of any standardized protocol for the extraction of plant-derived crude extracts to be used in herbal medicine or nutritional supplementation is proper documentation of the original botanical source of the extract via acquisition of a voucher specimen. The purpose of this document is to serve as an accepted protocol for voucher specimen collection, handling, and storage, with specific guidelines to address commercial and research uses.