Oscillations of an infinite plate on an elastic base under the influence of a rotating load

International Applied Mechanics -     

Deformation of an infinite plate with a crack

International Applied Mechanics -     

On the load transfer from elastic inclusions to an infinite elastic orthotropic plane with cuts

The present paper deals with the problem of load transfer from elastic inclusions to an infinite elastic orthotropic plane with cuts located on one of the principal orthotropy directions. The constitutive system of equations of this problem is derived under the assumption that the inclusions are in a uniaxial stress state. The obtained system consists of a singular integro-differential equation and a singular integral equation for the jumps of the tangential stresses acting on the inclusion shores and for the derivative of the the cut opening function. The behavior of solutions of the system of constitutive equations at the endpoints of the inclusions and cuts is studied, and the solution of this system is constructed by the numerical-analytic discrete singularity method.     

On the load transfer from a rigid cylindrical inclusion into an elastic half space

The present paper examines the problems related to the axial, lateral, and rotational loading of a rigid cylindrical inclusion which is embedded in bonded contact at the boundary of an isotropic elastic half space. The rigid inclusion is modeled as a field of distributed forces which represent the normal and shear tractions that act on the inclusion-elastic-medium interface. The intensities of these distributed tractions are determined by enforcing displacement compatibility conditions at discrete locations of the interface. These compatibility conditions are derived from rigid-body displacement modes appropriate for each loading. The results derived from this numerical scheme are compared with equivalent results derived via analytical techniques which focus on the solution of the governing integral-equation schemes and other approximate-solution schemes. The numerical results presented in the paper illustrate the manner in which the generalized stiffnesses of the embedded inclusion are influenced by its geometry and Poisson's ratio of the half-space region.     

On unsteady flow of an elastico-viscous fluid past an infinite plate with variable suction

Approximate solutions of the Navier-Stokes equations are derived through the Laplace transform for two dimensional, incompressible, elastico-viscous flow past a flat porous plate. The flow is assumed to be independent of the distance parallel to the plate. General formulae for the velocity distribution, skin friction and displacement thickness as functions of the given free stream velocity and suction velocity are obtained. The response of skin friction to the impulsive perturbations in the stream and suction velocities is studied. It is found that the order of singularity in the skin friction at t=0 increases due to the elastic property of the fluid in the impulsive case. When the stream is accelerated the skin friction still anticipates the velocity but the time of anticipation is reduced from 1/4 to (1/4) (1—k), where k is the elastic parameter of the fluid. It is found that in general the resistance of the elastico-viscous fluids to an impulsive increase in the stream velocity is greater than the viscous fluids, the elasticoviscous fluids also reach the steady state earlier than the viscous fluids.     

Vibration of a plate under an acoustic load

Kiev Polytechnic Institute. Translated from Prikladnaya Mekhanika, Vol. 24, No. 11, pp. 84–91, November, 1988.     

On the deflection of a thick plate under a sinusoidal load

Summary The equations of deflection of a thick plate presented in a previous paper are solved for an infinite plate under sinusoidally distributed pressure acting at its upper surface.The deflection and stress of the plate are calculated from the solutions of the approximate equations. The results are compared with those calculated from the exact solution and also with those obtained from other approximate methods.

---

Über die Durchbiegung einer dicken Platte unter einer sinusförmigen Last

Übersicht Die in einer früheren Arbeit gegebenen Gleichungen für die Durchbiegung einer dicken Platte werden für den Fall einer unendlichen Platte gelöst, deren Deckfläche durch einen sinusförmigen verteilten Druck belastet wird.Aus den Lösungen der Näherungsgleichungen werden die Durchbiegung und die Spannung einer dicken Platte berechnet. Die Ergebnisse werden mit dem aus der exakten Lösung erlangten Resultat sowie mit den aus anderen Näherungsverfahren erhaltenen Ergebnissen verglichen.

     

Dynamic stress intensity factors around two rectangular cracks in an infinite elastic plate under impact load

A dynamic problem for two equal rectangular cracks in an infinite elastic plate is considered. The two cracks are placed perpendicular to the plane surfaces of the plate. An incoming shock tensile stress is returned by the cracks. In the Laplace transform domain, the boundary conditions at the two sides of the plate are satisfied using the Fourier transform technique. The mixed boundary conditions are reduced to dual integral equations. Crack displacement is expanded in a series of functions which are zero outside of the cracks. The unknown coefficients in the series are determined by the Schmidt method. The stress intensity factors are defined in the Laplace transform domain and these are inverted using a numerical method.     

Perturbed magnetic field of an infinite plate with a centered crack

Deforming a cracked magnetoelastic body in a magnetic field induces a perturbed magnetic field around the crack. The quantitative relationship between this perturbed field and the stress around the crack is crucial in developing a new generation of magnetism-based nondestructive testing technologies. In this paper, an analytical expression of the perturbed magnetic field induced by structural deforma- tion of an infinite ferromagnetic elastic plate containing a centered crack in a weak external magnetic field is obtained by using the linearized magnetoelastic theory and Fourier transform methods. The main finding is that the perturbed magnetic field intensity is proportional to the applied tensile stress, and is dominated by the displacement gradient on the boundary of the magnetoelastic solid. The tangential component of the perturbed magnetic-field intensity near the crack exhibits an antisymmetric distribution along the crack that reverses its direction sharply across its two faces, while the normal component shows a symmetric distribution along the crack with singular points at the crack tips.     

Torsional oscillations of an infinite plate in an elastico-viscous fluid

Summary The equations of motion of an infinite plate performing torsional oscillations in Walters elastico-viscous liquid B have been solved by expanding the velocity profile in powers of the amplitude of oscillation of the plate. The first order solution consists of a transverse velocity and the second-order solution gives a radial-axial flow composed of a steady part and a fluctuating part. The steady part of the radial flow does not vanish outside the boundary layer and hence the equations are solved by another approximate method for the steady part of the flow. The effects of the non-Newtonian term is to increase the non-dimensional boundary layer to start with and subsequently to decrease it and to increase the shearing stress at the plate. The steady radial and the steady axial velocities fall short of the inelastic flow in the beginning but later on their values lie above.     

On hydromagnetic fluctuating flow past an infinite porous plate in slip flow regime

The effect of a uniform external magnetic field on the laminar, incompressible rarefied gas flow along an infinite porous flat plate is studied under the following conditions: 1) there is uniform suction, 2) the external flow velocity varies periodically with time in magnitude but not in direction, 3) the magnetic Reynolds number is small and 4) the current occurs under slip flow boundary conditions. Expressions for the velocity and temperature fields in the boundary layer are obtained. The response of skin friction, and heat transfer to the fluctuating stream is studied for variations in the rarefaction parameter h ₁, the magnetic field parameter M, and the frequency of the fluctuating stream.Nomenclature c _p specific heat of the gas - f ₁ Maxwells reflection coefficient - f ₂ thermal accommodation coefficient - G as defined in (36) - h ₁ rarefaction parameter (L ₁ v ₀/) - h ₂ nondimensional temperature jump coefficient (L ₂ v ₀/) - H amplitude of the skin friction - k thermal conductivity - K _n Knudsen number - L mean free path - L ₁ (2–f ₁/f ₁) L - L ₂ - M magnetic field parameter ( ₀ B ₀ ² /v ₀ ² ) - m 1/2[1+(1+4M+4i)^1/2], m _r+im _i - n ₁ 1/2[1+(1+4M)^1/2] - q heat flux - R suction Reynolds number - T temperature - x, y coordinates along and perpendicular to the plates - u, v velocity components along x, y-directions - density - kinematic viscosity - ₀ electrical conductivity - Prandtl number - frequency of the fluctuating stream - nondimensional frequency parameter (/v ₀ ² ) - nondimensional distance from wall (v ₀ y/) - phase lead - U _{0 0} mean velocity in the boundary layer - U _{0 1}, U _{0 2} amplitude of the velocity fluctuation in the boundary layer - specific heat ratio     

Antiplane shear crack in an infinite plate with a circular inclusion

Summary The effect of an elastic circular inclusion of a different material on the stress state of a single-cracked infinite sheet subjected to anti-plane shear is investigated. The proposed method makes use of complex variables in conjunction with Muskhelishvili's technique and has given interesting results for the stress field in the cracked plate. Numerical results, derived from this technique, investigate the influence of the regional inhomogeneity, produced by the inclusion in the structure, on the variation of stress-intensity factors at the crack tips.

---

Nichtebener Schubspannungsriß in einer unendlichen Platte mit einem kreisförmigen Einschluß

Übersicht Es wird der Einfluß untersucht, den ein elastischer, kreisförmiger Einschluß aus verschiedenem Material in einer unendlichen Platte mit einem Riß, welche einer longitudinalen Schubspannung unterworfen ist, auf den Spannungszustand der Platte ausübt. Die vorgeschlagene Methode benutzt komplexe Variablen in Zusammenhang mit der Muskhelishvilischen Technik und gibt für den Spannungszustand in der Platte interessante Resultate. Numerische Ergebnisse wurden gefunden, um den Einfluß der Inhomogenität auf die Spannungsintensitätsfaktoren des Risses zu bestimmen.

     

Periodic rigid line problem in an infinite plate

Summary Periodic rigid line problem in an infinite plate under the action of remote stresses is studied in this paper. Using the complex variable function method, the problem is reduced into a solution of singular integral equation. The singular integral equation is converted into a Fredholm integral equation by the use of some substitution of the unknown function. A numerical approach is suggested for the solution of the obtained Fredholm integral equation. Finally, several numerical examples are carried out with the calculated stress singularity coefficients at the rigid line tips.

---

Das Problem periodisch verteilter, starrer, zeilenförmiger Einschlüsse in einer unendlichen Platte

Übersicht In der vorliegenden Arbeit wird das Problem periodisch verteilter, starrer, zeilenförminger Einschlüsse unter der Einwirkung weit entfernter Spannungen untersucht. Unter Anwendung der Funktionsmethode einer komplexen Veränderlichen wird das Problem auf das Lösen einer singulären Integralgleichung zurückgeführt.Die singuläre Integralgleichung wird mittels der Verwendung eines speziellen Ersatzes für die unbekannte Funktion in eine Fredholm-Integralgleichung umgewandelt. Zur Lösung der erhaltenen Fredholm-Integralgleichung wird eine numerische Lösung vorgeschlagen. Schließlich werden verschiedene numerische Beispiele zur Berechnung der Koeffizienten der Spannungssingularität an den starren Einschlußspitzen durchgeführt.