Use of the optogalvanic effect (OGE) for isotope ratio spectrometry of 13CO2 and 14CO2

The use of isotopic carbon dioxide lasers for determination of carbon (and oxygen) isotope ratios was first demonstrated in 1994. Since then a commercial device called LARA, has been manufactured and used for Helicobacter pylori breath tests using (13)C-labelled urea. The major advantages of the optogalvanic effect compared with other infrared absorption isotope ratio measurement techniques are its lack of optical background and its high sensitivity resulting from a signal gain proportional to laser power. Continuous normalisation using two cells, a standard and sample, lead to high accuracy as well as precision. Recent advances in continuous flow measurement of (13)C/(12)C ratios of CO(2) in air and extensions of the technique to (14)C, which can be analysed as a stable isotope, are described.     

A robust and fast method of sampling and analysis of delta13C of dissolved inorganic carbon in ground waters

The stable carbon isotopic composition of dissolved inorganic carbon (delta13C(DIC)) is traditionally determined using either direct precipitation or gas evolution methods in conjunction with offline gas preparation and measurement in a dual-inlet isotope ratio mass spectrometer. A gas evolution method based on continuous-flow technology is described here, which is easy to use and robust. Water samples (100-1500 microl depending on the carbonate alkalinity) are injected into He-filled autosampler vials in the field and analysed on an automated continuous-flow gas preparation system interfaced to an isotope ratio mass spectrometer. Sample analysis time including online preparation is 10 min and overall precision is 0.1 per thousand. This method is thus fast and can easily be automated for handling large sample batches.     

Use of the optogalvanic effect (OGE) for isotope ratio spectrometry of 13CO2 and 14CO2

The use of isotopic carbon dioxide lasers for determination of carbon (and oxygen) isotope ratios was first demonstrated in 1994. Since then a commercial device called LARA^?, has been manufactured and used for Helicobacter pylori breath tests using ¹³C-labelled urea. The major advantages of the optogalvanic effect compared with other infrared absorption isotope ratio measurement techniques are its lack of optical background and its high sensitivity resulting from a signal gain proportional to laser power. Continuous normalisation using two cells, a standard and sample, lead to high accuracy as well as precision. Recent advances in continuous flow measurement of ¹³C/¹²C ratios of CO₂ in air and extensions of the technique to ¹⁴C, which can be analysed as a stable isotope, are described.     

Stable isotope determination of ester and ether methyl moieties in plant methoxyl groups

Plant methoxyl groups of lignin and pectin have both distinct stable hydrogen isotope (δ²H) and carbon isotope (δ¹³C) values that can be used for studying environmental processes and for investigating the origin and authenticity of biomaterials. Up to now, the reported methods have been applied only to determine isotope values of the bulk plant methoxyl pool. In this work, we have applied several methods to distinguish between stable isotope ratios of methoxyl groups of pectin and the bulk plant methoxyl pool. Our results demonstrate that by applying alkaline hydrolysis to specifically cleave off the ester methyl moiety (pectin-like), we can distinguish δ²H and δ¹³C values of the pectin methoxyl pool from the bulk methoxyl pool. No measureable isotope discrimination was observed either during sample preparation or during analytical measurement. Furthermore, using this method, no major isotope difference in either the hydrogen or carbon isotope signature of the methoxyl groups of plant pectin and bulk matter from plant species such as leaves from trees, apples, carrots and potatoes was noted. We show the methanol released during alkaline hydrolysis of plant material and subsequently treated with hydriodic acid to be an excellent procedure to measure specifically and precisely the δ¹³C and δ²H isotope values of plant pectin-like methoxyl groups. This method is particularly advantageous when plant matter with a low methoxyl content has to be analysed.     

Stable isotope determination of ester and ether methyl moieties in plant methoxyl groups

Plant methoxyl groups of lignin and pectin have both distinct stable hydrogen isotope (δ(2)H) and carbon isotope (δ(13)C) values that can be used for studying environmental processes and for investigating the origin and authenticity of biomaterials. Up to now, the reported methods have been applied only to determine isotope values of the bulk plant methoxyl pool. In this work, we have applied several methods to distinguish between stable isotope ratios of methoxyl groups of pectin and the bulk plant methoxyl pool. Our results demonstrate that by applying alkaline hydrolysis to specifically cleave off the ester methyl moiety (pectin-like), we can distinguish δ(2)H and δ(13)C values of the pectin methoxyl pool from the bulk methoxyl pool. No measureable isotope discrimination was observed either during sample preparation or during analytical measurement. Furthermore, using this method, no major isotope difference in either the hydrogen or carbon isotope signature of the methoxyl groups of plant pectin and bulk matter from plant species such as leaves from trees, apples, carrots and potatoes was noted. We show the methanol released during alkaline hydrolysis of plant material and subsequently treated with hydriodic acid to be an excellent procedure to measure specifically and precisely the δ(13)C and δ(2)H isotope values of plant pectin-like methoxyl groups. This method is particularly advantageous when plant matter with a low methoxyl content has to be analysed.     

Microcombustion of ng Amounts of Carbon in Non-Volatile Materials for isotope Ratio Evaluation

Abstract

A novel microcombustion technique for carbon isotopic analysis of nanogram amounts of carbon in non-volatile materials based on isotope ratio monitoring (irm) mass spectrometry is described. Liquid or solid samples placed in a quartz sleeve are combusted at 1000°C in a continuous stream of helium and oxygen. CO₂ removed from the carrier gas stream by cryogenic trapping is transferred onto a GC column. Following GC separation, the CO₂ is transferred via an open split to the ion source of a gas isotope ratio mass spectrometer. Reproducibility for samples >25 nmol carbon is <1‰. Problems associated with blanks from various sources and with reproducible deposition of small sample amounts led to variable accuracy, which was dependent on the compound class being analysed. Minimum sample size was in the range from 5 to 10 nmol carbon. Measurements of dissolved organic carbon (DOC) of groundwater from Germany yielded consistent values of δ¹³C = -28.8‰.     

Inaccuracies in helium isotope measurements

The results of mass-spectrometric measurements of the helium isotope content in aluminum samples obtained at different times and under different conditions and also of the helium isotope content in iron-manganese concretions are presented. The measurement accuracy of the helium isotope content in aluminum depends on various measuring-technique-related factors: vacuum conditions, gas inleakage and escape in the mass analyzer and/or gas extraction system, the device memory effect as applied to any of the helium isotopes, preparation accuracy of reference samples, their persistence, etc. In the given case, the statistical processing of measurement data with different criteria indicates that the variances diverge considerably but does not discover the sources of divergence. To measure the helium isotope content in iron-manganese concretions, a powdered sample is placed in a metallic capsule, which is then thrown into a heated crucible in vacuum, where gases to be tested liberate. Our statistical analysis of measuring data confirms the supposition that, if the capsule is made of low-melting aluminum and the capsule with a fine powder is thrown into a heated crucible, the variance grows and measuring data are underestimated. This seems to be associated with rapid melting of the capsule, emission of fine particles of the sample out of the hot zone of the reactor, and their loss. When the capsule is made of nickel, a much higher melting material than aluminum, it does not melt and the test material is not ejected from the hot zone. That is what follows from the results of the statistical analysis in our opinion.     

Microcombustion of ng Amounts of Carbon in Non-Volatile Materials for isotope Ratio Evaluation

Abstract A novel microcombustion technique for carbon isotopic analysis of nanogram amounts of carbon in non-volatile materials based on isotope ratio monitoring (irm) mass spectrometry is described. Liquid or solid samples placed in a quartz sleeve are combusted at 1000°C in a continuous stream of helium and oxygen. CO(2) removed from the carrier gas stream by cryogenic trapping is transferred onto a GC column. Following GC separation, the CO(2) is transferred via an open split to the ion source of a gas isotope ratio mass spectrometer. Reproducibility for samples >25 nmol carbon is <1‰. Problems associated with blanks from various sources and with reproducible deposition of small sample amounts led to variable accuracy, which was dependent on the compound class being analysed. Minimum sample size was in the range from 5 to 10 nmol carbon. Measurements of dissolved organic carbon (DOC) of groundwater from Germany yielded consistent values of δ(13)C = -28.8‰.     

Isotope ratio monitoring gas chromatography/Mass spectrometry of D/H by high temperature conversion isotope ratio mass spectrometry

Of all the elements, hydrogen has the largest naturally occurring variations in the ratio of its stable isotopes (D/H). It is for this reason that there has been a strong desire to add hydrogen to the list of elements amenable to isotope ratio monitoring gas chromatography/mass spectrometry (irm-GC/MS). In irm-GC/MS the sample is entrained in helium as the carrier gas, which is also ionized and separated in the isotope ratio mass spectrometer (IRMS). Because of the low abundance of deuterium in nature, precise and accurate on-line monitoring of D/H ratios with an IRMS requires that low energy helium ions be kept out of the m/z 3 collector, which requires the use of an energy filter. A clean mass 3 (HD(+.)) signal which is independent of a large helium load in the electron impact ion source is essential in order to reach the sensitivity required for D/H analysis of capillary GC peaks. A new IRMS system, the DELTA(plus)XL(trade mark), has been designed for high precision, high accuracy measurements of transient signals of hydrogen gas. It incorporates a retardation lens integrated into the m/z 3 Faraday cup collector. Following GC separation, the hydrogen bound in organic compounds must be quantitatively converted into H(2) gas prior to analysis in the IRMS. Quantitative conversion is achieved by high temperature conversion (TC) at temperatures >1400 degrees C. Measurements of D/H ratios of individual organic compounds in complicated natural mixtures can now be made to a precision of 2 per thousand (delta notation) or, better, with typical sample amounts of approximately 200 ng per compound. Initial applications have focused on compounds of interest to petroleum research (biomarkers and natural gas components), food and flavor control (vanillin and ethanol), and metabolic studies (fatty acids and steroids). Copyright 1999 John Wiley & Sons, Ltd.     

A robust and fast method of sampling and analysis of δ13C of dissolved inorganic carbon in ground waters

The stable carbon isotopic composition of dissolved inorganic carbon (δ¹³C_DIC) is traditionally determined using either direct precipitation or gas evolution methods in conjunction with offline gas preparation and measurement in a dual-inlet isotope ratio mass spectrometer. A gas evolution method based on continuous-flow technology is described here, which is easy to use and robust. Water samples (100–1500 μl depending on the carbonate alkalinity) are injected into He-filled autosampler vials in the field and analysed on an automated continuous-flow gas preparation system interfaced to an isotope ratio mass spectrometer. Sample analysis time including online preparation is 10 min and overall precision is 0.1 ‰. This method is thus fast and can easily be automated for handling large sample batches.     

New methods for fully automated isotope ratio determination from hydrogen at the natural abundance level

Abstract A variety of methods for measurement of (2)H/(1)H from H(2) are evaluated for their ability to be fully automated and for applicability to automated isotopic analysis of water and organic compounds. Equilibration of water with H(2) gas with the aid of a platinum catalyst has been commercialized into a fully automated sample preparation device. A second and newer technique, involving injecting water, methane, or other volatile organic compounds onto hot chromium in a reactor attached to the dual inlet system of a gas isotope ratio mass spectrometer, can be integrated with a conventional GC-autosampler to allow automated analysis of a variety of substrates. Both techniques result in precisions around 1‰ (δ notation) on the VSMOW scale, and are fast and accurate, and with appropriate mass spectrometers require only negligible scaling for the SLAP/VSMOW difference. Several experimental methods which show considerable promise employ "isotope ratio monitoring" (irm) inlet systems, in which a carrier gas is used for transport of H(2) to the mass spectrometer. Any such method has to address the problem of He ions corrupting the measurement of the H(2) ions. One such approach uses a heated palladium membrane for selective introduction of H(2) into the mass spectrometer, and a second involves modifications to the ion optics to control the stray helium ions. Both approaches have significant limitations that must be overcome before irm techniques can be used in routine applications, in particular for measuring hydrogen isotopes from GC effluents (irm-GCMS).     

Isotopic composition and concentration measurements of atmospheric CO2 with a diode laser making use of correlations between non-equivalent absorption cells

Correlations between a sample and a sealed reference cell of a tunable diode laser spectrometer for the measurement of the isotopic composition (δ ¹³C) and the concentration of atmospheric carbon dioxide in air have been investigated. Likely due to fluctuations of the laser emission profile, these correlations have been used to improve the performance of the instrument. In a comparison with isotope ratio mass spectrometer and gas chromatographic measurements, an accuracy of 0.15‰ for δ ¹³C and 0.05 ppmv for the CO₂ concentration is demonstrated for 40 s integration time. Long-term stability and field deployment of the instrument have been investigated during a few days measurement campaign in Paris.     

2.0μm附近模拟呼吸气体中~(13)CO_2/~(12)CO_2同位素丰度的高精度实时在线测量

采用可调谐二极管激光吸收光谱技术,结合一新型多通池搭建了一套模拟呼吸气体中CO_2同位素丰度的测量装置.气体的压强、温度和流速被很好地控制且均能保持长期的稳定性;采用三次多项式拟合光谱基线,对光谱进行归一化,很好地消除了功率变化对测量结果的影响;利用移窗-回归技术消除频率漂移对同位素丰度测量的影响.实验结果表明:移窗-回归法的引入不仅延长了系统的稳定时间,还提高了系统的测量精度;小波去噪的应用获得了比多光谱平均法高2倍的信噪比;系统的稳定时间为100 s;Kalman滤波后系统测量精度为0.067‰.     

Stable isotopic analysis of pyrogenic organic matter in soils by liquid chromatography-isotope-ratio mass spectrometry of benzene polycarboxylic acids

Pyrogenic organic matter (PyOM), the incomplete combustion product of organic materials, is considered stable in soils and represents a potentially important terrestrial sink for atmospheric carbon dioxide. One well-established method of measuring PyOM in the environment is as benzene polycarboxylic acids (BPCAs), a compound-specific method, which allows both qualitative and quantitative estimation of PyOM. Until now, stable isotope measurement of PyOM carbon involved measurement of the trimethylsilyl (TMS) or methyl (Me) polycarboxylic acid derivatives by gas chromatography-combustion-isotope ratio mass spectrometry (GC-C-IRMS). However, BPCA derivatives can contain as much as 150% derivative carbon, necessitating post-analysis correction for the accurate measurement of δ13C values, leading to increased measurement error. Here, we describe a method for δ13C isotope ratio measurement and quantification of BPCAs from soil-derived PyOM, based on ion-exchange chromatography (IEC-IRMS). The reproducibility of the δ13C measurement of individual BPCAs by IEC-IRMS was better than 0.35‰ (1σ). The δ13C-BPCA analysis of PyOM in soils, including at natural and artificially enriched 13C-abundance, produced accurate and precise δ13C measurements. Analysis of samples that differed in δ13C by as much as 900‰ revealed carryover of <1‰ between samples. The weighted sum of individual δ13C-BPCA measurements was correlated with previous isotopic measurements of whole PyOM, providing complementary information for bulk isotopic measurements. We discuss potential applications of δ13C-BPCA measurements, including the study of turnover rates of PyOM in soils and the partitioning of PyOM sources based on photosynthetic pathways.     

CO2及其碳同位素比值高精度检测研究

改进了一种基于傅里叶变换红外光谱法测量CO₂气体的装置, 改进后的装置能够提高CO₂检测精度, 并能同时测量CO₂碳同位素比值. 研究了温度和压力对CO₂浓度值和CO₂碳同位素比值测量的影响规律. 利用该装置连续测量了标准CO₂气体和环境大气, 对标准CO₂气体测量得到的CO₂浓度值及其碳同位素比值进行温度和压力影响修正, 获得了较好的精度和准确度. 关键词： 光谱学 同位素比值 傅里叶变换红外光谱 二氧化碳     

Position-specific carbon isotope analysis of trichloroacetic acid by gas chromatography/isotope ratio mass spectrometry

Trichloroacetic acid (TCAA) is an important environmental contaminant present in soils, water and plants. A method for determining the carbon isotope signature of the trichloromethyl position in TCAA using gas chromatography/combustion/isotope ratio mass spectrometry (GC/C/IRMS) was developed and tested with TCAA from different origins. Position-specific isotope analysis (PSIA) can provide direct information on the kinetic isotope effect for isotope substitution at a specific position in the molecule and/or help to distinguish different sources of a compound. The method is based on the degradation of TCAA into chloroform (CF) and CO? by thermal decarboxylation. Since thermal decarboxylation is associated with strong carbon isotope fractionation (ε = -34.6 ± 0.2‰) the reaction conditions were optimized to ensure full conversion. The combined isotope ratio of CF and CO? at the end of the reaction corresponded well to the isotope ratio of TCAA, confirming the reliability of the method. A method quantification limit (MQL) for TCAA of 18.6 μg/L was determined. Samples of TCAA produced by enzymatic and non-enzymatic chlorination of natural organic matter (NOM) and some industrially produced TCAA were used as exemplary sources. Significant different PSIA isotope ratios were observed between industrial TCAA and TCAA samples produced by chlorination of NOM. This highlights the potential of the method to study the origin and the fate of TCAA in the environment.     

Development of a dedicated isotope mass spectrometer for the noninvasive diagnostics of humans infected with Helicobacter Pylori

A dedicated isotope mass spectrometer for the noninvasive diagnostics of humans infected with Helicobacter Pylori using the isotope respiratory test is developed. A low-aberration mass analyzer is calculated, an input system that makes it possible to eliminate the memory effects is developed, and a small-size ion detector is constructed. The mass spectrometer is created, and the tests are performed. The measurement accuracy of the ¹³C/¹²C and ¹⁶O/¹⁸O isotope ratios are 1.7 and 2.2‰, respectively. Preliminary medical tests show that the spectrometer can be employed for the desired diagnostics.     

Diode laser absorption spectrometry for 13CO2/12CO2 isotope ratio analysis: Investigation on precision and accuracy levels

Near-infrared laser spectroscopy is used to measure the ¹³C/¹²C isotope abundance ratio in gas phase carbon dioxide. The spectrometer, developed expressly for field applications, is based on a 2 μm distributed feedback diode laser in combination with sensitive wavelength modulation detection. It is characterized by a simplified optical layout, in which a single detector and associated electronics are used to probe absorptions of a pair of ¹³CO₂ and ¹²CO₂ lines, simultaneously in a sample, as well as a reference gas. For a careful investigation of the achievable precision and accuracy levels, we carried out a variety of laboratory tests on CO₂ samples with different isotopic compositions, calibrated with respect to the international standard material by means of isotope ratio mass spectrometry. The 1-σ accuracy of the ¹³CO₂/¹²CO₂ determinations, reported in the so-called δ notation, is about 0.5‰ (including both statistical and systematic errors), for δ-values in the range from -30‰ to +20‰. We show that the major source of systematic errors is a consequence of the non-linearity of the Lambert–Beer absorption law, and can be corrected for to a very high degree of accuracy. PACS 42.62.Fi; 42.55.Px; 33.20.Ea     

Two-step synthesis of ethylene glycol-D6 via isotope exchange of glycolic acid

Tracers can be used to monitor emissions of leachate from landfills in order to detect hydrological pathways and to evaluate environmental pollution. We investigated the stable carbon isotope ratio (δ¹³C–Σ CO ₂) in dissolved inorganic carbon and tritium (³H) in water, in addition to the tracers of pollution commonly found in relatively high concentrations in leachate, such as chloride (Cl), organic matter (COD), nitrogen (total and NH₄–N), iron (Fe), electrical conductivity (EC) and pH. The sampling was performed at seven landfills in the south-eastern part of Norway during a period of 5 years. The objective was to evaluate the potential for tracing leachate in the environment with emphasis on groundwater pollution. By measuring the δ¹³C–Σ CO ₂ in leachates, groundwaters and surface waters, the influence of leachate can be identified. The value of δ¹³C–Σ CO ₂ varied from?5.5 to 25.9 ‰ in leachate, from?25.4 to 14.7 ‰ in groundwater and from?19.7 to?13.1 ‰ in creeks. A comparison of the carbon isotope ratio with COD, EC and the concentrations of total and NH ₄–N, Cl and Fe showed that δ¹³C–Σ CO ₂ is a good tracer for leachate due to higher sensitivity compared to other parameters. The mean concentrations of all the studied parameters were higher in the leachate samples; however, only the carbon isotope ratio showed significant differences between all the groups with strong and middle pollution and samples with low pollution, showing that it can be used as a convenient tracer for leachate in groundwater and surface water. The carbon isotope ratio showed strong correlation between nitrogen, EC and bicarbonate, but not with pH. Tritium was only sporadically found in measureable concentrations and is not considered as a suitable tracer at the sampled locations.     

Carbon isotope analysis in urea at high 13C-abundances using the 13/12CO2-breath test device FANci2

The increasing application of 13C-labelled urea in medicine requires simple and reasonable methods for measuring highly enriched C in urea. The combination: ultimate organic analysis--mass spectrometry so far prescribed is complicated and expensive. For medical diagnosis, however, isotope selective nondispersive infrared spectrometers (NDIRS) have been available for many years. One of these tools is FANci2 which is very reasonable and easily to be operated. By means of such devices also urea highly enriched in 13C can be analysed, provided that the samples are first diluted with a defined amount of urea of natural isotopic composition and then transformed into carbon dioxide by means of urease. The relative abundance of 13C in this carbon dioxide, measured by nondispersive infrared spectrometry, is then a measure of the 13C abundance in the initial urea sample. Comparison of results of such measurements with those attained by mass spectrometry proves that this procedure is feasible and yields precis results.