Differential capacity and chronocoulometry studies of a quaternary ammonium surfactant adsorbed on Au(111)

The adsorption of a model quaternary ammonium surfactant, octyltrimethylammonium triflate, on Au(111) has been studied using capacity and chronoculometry methods. The surfactant adsorbs on the metal surface as a non‐dissociated ion pair at moderate potentials but can be desorbed by either positive or negative polarization. Within the adsorption region, two states are observed which correspond to a horizontal monolayer and a higher coverage vertically oriented film. Measurements of capacity transients upon potential steps reveal a slow organization of the molecular film. Although it is possible to equate the transients to known surfactant film aggregate geometries, the results are in disagreement with thermodynamic results. In comparison with other studies, the results indicate that the states of surfactant adsorption depend on surfactant chain length and electrode crystallography. Copyright © 2013 John Wiley & Sons, Ltd.     

Lipophilic counterion effect on aggregation and adsorption behavior of quaternary ammonium surfactants

The obvious different aggregation and adsorption behavior of six newly quaternary ammonium surfactants with different lipophilic counterions has been discoverd by measurements of equilibrium and dynamic surface tension, fluorescence and conductivity. Interestingly, the critical micelle concentration (CMC) and its surface tension γ_CMC decrease with the increasing counterion chain length. However, three methods have confirmed that an exception of CMC increases slightly from C₁₆NC₁ to C₁₆NC₂. According to experimental results, a balanced mechanism between hydrophobicity and electrostatic of counterion is proposed. Besides, the dynamic surface tension results show the diffusion coefficient increases with the increasing counterion length both at a short time (D_t?→?0) and long time (D_t?→?∞), which indicates a faster adsorption process. Unlike the inorganic counterion, the diffusion coefficient decreases with the increase of hydrophobic chain length. This is attributed to the strong electrostatic interactions between counterions and cationic headgroups.     

聚季铵盐离子液体材料制备及其对蛋白质吸附性能评价

通过一步合成法制备了两种可聚合季铵盐离子液体功能单体,并通过沉淀聚合法合成了相应的聚离子液体聚合物。对产物进行了核磁共振、扫描电镜、热重分析等表征。结果表明:所制备的两种材料粒径均匀,约为600 nm的椭球形颗粒,颗粒之间有相互粘连。通过对牛血清白蛋白(BSA)、卵清蛋白(OVA)、牛血红蛋白(BHb)、溶菌酶(Lys)、胰蛋白酶(Try)5种蛋白质的吸附性能实验,考察了聚季铵盐离子液体材料对蛋白质的吸附性能。考察结果表明:两种聚离子液体材料均对蛋白质具有一定的吸附性能。其中以4-乙烯基苄氯季铵盐离子液体为功能单体制备的聚离子液体材料对胰蛋白酶的吸附性能最好,是一种具有良好应用前景的材料。     

Liquid-liquid distribution of ion associates of hexabromotellurate (IV) with quaternary ammonium counter ions

The distribution behavior of ion associates (Q⁺)₂. TeBr₆²⁻ of TeBr₆²⁻ with quaternary ammonium cations (Q⁺) between aqueous phase and two organic phases (1,2-dichloroethane (DCE) and chloroform (CF)) was examined, and the extraction constants (log K_ex) were determined. The extractability with long-chain alkyltrimethylammonium cations (group I) is greater than that with symmetrical tetraalkylammonium cations (group II) in the 1,2-dichloroethane extraction system and the difference in log K_ex for two cations (one of each type) with the same number of carbon atoms was about 3 on the average. The contributions of a methylene group in the cations of groups I and II to log K_ex were found to be 0.431.10 and about 0.74 on the average. Among the ion associates examined, the extractability of the extracting solvent was in the DCE>CF; the difference in log K_ex was about 5 on the average.     

Preparation of poly(methyl methacrylate) microcapsules by in situ polymerization on the surface of calcium carbonate particles

Poly(methyl methacrylate) (PMMA) microcapsules were prepared by the in situ polymerization of methyl methacrylate (MMA) and N,N′-methylenebisacrylamide on the surface of calcium carbonate (CaCO₃) particles, followed by the dissolution of the CaCO₃ core in ethylenediaminetetraacetic acid solution. The microcapsules were characterized using fluorescence microscopy, atomic force microscopy, scanning electron microscopy, and Fourier transform infrared spectroscopy. The average sizes of the CaCO₃ particles and PMMA capsules were 3.8 ± 0.6 and 4.0 ± 0.6 μm, respectively. A copolymer consisting of MMA and rhodamine B-bearing MMA was also used to prepare microcapsules for fluorescent microscopy observations. Fluorescein isothiocyanate-labeled bovine serum albumin was enclosed in the PMMA microcapsules and its release properties were studied.     

稀土元素对提铯离子筛交换性能的影响

对比了提铯离子筛对铯离子与分部稀土元素的交换容量和分配系数;了钕离子对提铯离子交换性能的影响,以及稀土元素存在对提铯离子筛在高效废液中选择性的影响。稀土元素对提铯离子筛的铯离子交换容量有一定的影响,但对铯离子分配系数影响不大;只要选择合适的液固比V：m,基本上可以消除稀土元素的存在对提铯离子筛在高放废液中铯离子选择性的影响。     

胶原纤维固化黑荆树单宁吸附V(V)的研究

研究了胶原纤维固化黑荆树单宁对V(V)的吸附。采用不同温度、pH值等条件进行吸附研究,并进一步探讨了固化黑荆树单宁的吸附动力学和吸附柱动力学及其吸附机理。结果表明,该材料对V(V)的吸附平衡符合Freund lich方程,温度对吸附平衡的影响不明显;吸附动力学可用拟二级速度方程来描述,该材料同时具有良好的柱动力学特性;V(V)的吸附过程可能存在三个反应,即V(V)与吸附剂之间发生氧化还原反应生成V(IV),V(IV)和-COOH之间发生离子交换反应,以及V(IV)与单宁的邻位羟基发生螯合。     

壳聚糖对Cd2+的吸附性能

壳聚糖(ｃｈｉｔｏｓａｎ,简称ＣＴＳ)是由虾、蟹壳脱钙、蛋白质和脂肪后、经化学改性得到的天然高分子聚合物,分子中存在能与金属离子配位的羟基或氨基,其配合物可作为絮凝剂和螯合吸附剂用于水处理[1 3]及湿法冶金[4]等。本文考察了壳聚糖对Ｃｄ2+的静态吸附性能。1　实验部分1.1　试剂与仪器壳聚糖(浙江玉环县化工厂);硫酸镉、硝酸镉(分析纯,广州化学试剂厂);碳酸镉(化学纯,上海试剂二厂),其余试剂均为分析纯。78 1型磁力加热搅拌器(江苏金坛市恒丰仪器厂),501型超级恒温器(上海实验仪器厂),ｐＨＳ 3型酸度计(上海第二分析仪器厂)。1…     

Eu(III)在北山花岗岩上的吸附作用

用电位滴定法研究了甘肃北山花岗岩(BS03,600m)的酸、碱性质,用批式法研究了Eu(III)在该花岗岩上的吸附行为.实验结果表明:在离子强度I=0.1M的NaCl溶液中,北山花岗岩的pHPZNPC为9.4,当I增大至0.4M时,pHPZNPC为9.0.不同离子强度下花岗岩的电位滴定曲线与类似条件下蒙脱石的相仿.Eu(III)在北山花岗岩上的吸附分配比(Kd)随pH、离子强度和Eu(III)浓度的变化而变化.在低pH范围,Eu(III)的Kd值随离子强度的增大显著减小,而在高pH值范围,离子强度对Kd的影响甚微.用模型定量解释了Eu(III)在北山花岗岩上的吸附随pH、离子强度和Eu(III)浓度而变化的实验数据,该模型包含Eu3+与花岗岩发生的阳离子交换反应以及Eu(III)与花岗岩表面羟基发生两个内层表面配合反应(inner-sphere surface complexation reactions).用所建模型对离子强度为0.1M时Eu(III)在北山花岗岩上的吸附行为作了预测,并与文献报道的类似条件下Am(III)在北山花岗岩上的吸附实验数据作了比较.     

超高效液相色谱-串联质谱法测定纺织助剂中双(氢化牛脂基)二甲基季铵化合物

建立了快速测定纺织助剂中双(氢化牛脂基)二甲基季铵化合物(DHTDMAC)的超高效液相色谱-串联质谱(UPLC-MS/MS)分析方法.样品经5%(v/v)甲酸甲醇超声波提取、稀释后,采用Eclipse Plus C18柱(50 mm×2.1 mm, 1.8 μm)分离,甲醇和0.1%(v/v)甲酸水溶液为流动相梯度洗脱,电喷雾离子源正离子多反应监测模式进行定性和定量分析.实验结果表明,DHTDMAC在10~280 μg/L范围内与峰面积呈良好的线性关系,相关系数(r²)为0.9991;以不低于3倍信噪比计算方法检出限(LOD, S/N=3)为3 mg/kg;方法定量限(LOQ, S/N=10)为10 mg/kg.3种纺织助剂基质中DHTDMAC在3个不同加标水平的平均回收率为97.2%~108.3%,相对标准偏差(RSD)为1.5%~4.6%.该方法灵敏度高、操作简便、快速准确,适用于纺织助剂中DHTDMAC的分析测定.     

A facile approach to prepare water-soluble magnetic metal (oxide) frameworks based on Na,Ca alginate and maghemite

1. Download : Download high-res image (135KB)
2. Download : Download full-size image

     

有机-无机杂化聚离子液体材料制备及其对染料吸附性能的评价

以烯丙基三乙氧基硅烷与1-乙烯基-3-辛基咪唑溴盐离子液体为单体通过自由基聚合及溶胶-凝胶制备了有机-无机杂化聚离子液体材料。通过红外光谱和扫描电镜对所制备的杂化聚离子液体材料进行了表征,并考察了其对柠檬黄、日落黄、苋菜红以及诱惑红等常见染料的吸附性能。研究结果表明:所制备的聚离子液体材料对日落黄和诱惑红具有优异的吸附性能,其吸附容量分别为29.20和86.17 mg/g;当吸附时间为5 min时,该材料对诱惑红和日落黄的吸附分别达到平衡时吸附量的87.5%和72.8%,显示了较快的吸附速率。     

DOPA醌在Cu(100)表面吸附的密度泛函理论研究

采用广义梯度密度泛函理论(GGA)的BLYP方法结合周期性平板模型,以原子簇Cu41为模拟表面,对DOPA醌分子在Cu(100)表面不同位置的吸附模型进行了构型优化、能量计算以及Mulliken布居分析,结果表明通过相邻的羰基垂直吸附在表面的桥位是其最佳吸附方式,吸附能为247.2310kJ/mol;其次为顶位、顶位R45和穴位,吸附能分别为227.7162kJ/mol、220.7305kJ/mol和217.8456kJ/mol。Mulliken布居分析结果表明整个吸附体系发生了由Cu原子向DOPA醌分子的电荷转移。     

Theoretical study of NO adsorption/dissociation on Pd (100) and (111) surfaces

Both adsorption and dissociation of the diatomic molecular NO on Pd (100) and (111) surfaces are studied using the extended London‐Eyring‐Polyani‐Sato (LEPS) method constructed by means of 5‐MP (the 5‐parameter Morse potential). All critical characteristics of the system that we obtain, such as adsorption geometry, binding energy, eigenvalues for vibration, are in good agreement with the experimental results. On Pd (100) surface, NO prefers to adsorb in fourfold hollow site (H) uprightly at low coverage. With increase in the coverage NO gradually tilts in fourfold hollow and bridge sites. For NO? Pd (111) system, two adsorption states are found at low coverage, of which one adsorption state is the B(tilt) state that the centroid of NO projects at bridge site, another (H? B? H state) that NO almost parallels to the (111) surface with the vibration frequency of 610 cm^?1, but the frequency is near to that of the atoms, which is easy to be ignored in experiments. At high coverage, two transitional states (BH and HT) are found. NO is difficult to dissociate on Pd (100) and (111) surfaces. Especially for NO? Pd (111) system, the three‐well‐potential dissociation mode is initially put forward to show the remarkable dissociation process with two dissociation transitional states of NO on Pd (111). Copyright © 2008 John Wiley & Sons, Ltd.     

Extractive spectrophotometric determination of palladium with N,N,N',N'-tetra(2-ethylhexyl)-thiodiglycolamide T(2EH)TDGA

A precise, sensitive and selective method for the spectrophotometric determination of palladium (II) using N,N,N′,N′-tetra(2-ethylhexyl) thiodiglycolamide T(2EH)TDGA as an extractant is described. Palladium (II) forms yellow colored complex with T(2EH)TDGA which exhibits an absorption maximum at ∼300 nm. The colored complex obeys Beer's law in the concentration range 1.0-15.0 μg ml⁻¹ of palladium with a molar absorptivity of 1.29 × 10⁵ M⁻¹ cm⁻¹. The effects of various experimental parameters have been studied to establish the optimum conditions for the extraction and determination of palladium. The precision of the method has been evaluated and the relative standard deviation has been found to be less than 0.5%. The method has been successfully applied to the determination of palladium in simulated high level liquid waste (SHLW) solution.     

新型二茂铁甲基季铵盐离子液体的合成与表征

以二茂铁与二甲胺为原料合成了碘化二茂铁甲基季铵盐,再经复分解反应得到乙酸二茂铁甲基季铵盐离子液体;表征了离子液体的结构,测定了其熔点和溶解性.结果表明,合成的乙酸二茂铁甲基季铵盐离子化合物熔点低于100℃,是一种新型的二茂铁甲基季铵盐离子液体.     

聚[2-(丙烯酰氧基)乙基]三甲基氯化铵-乙二醇二甲基丙烯酸酯整体柱固相萃取结合高效液相色谱法测定尿液中3种苯二氮（卄卓）类药物

以[2-（丙烯酰氧基）乙基]三甲基氯化铵（DAC）为单体,乙二醇二甲基丙烯酸酯（EDMA）为交联剂在注射器中制备聚合物整体柱,用其固相萃取尿液中溴西泮（BRZ）、劳拉西泮（LRZ）和地西泮（DZP）3种苯二氮（卄卓）类药物（BZDs）,并采用高效液相色谱法（HPLC）分析。实验考察了整体柱聚合时间及固相萃取条件（淋洗溶液、洗脱溶剂种类和体积）对BZDs萃取效率的影响。结果表明,仅聚合4 h得到的整体柱对BZDs吸附效率为100%。取尿液样品4 mL上样,用4 mL H₂O冲洗,1 mL乙酸乙酯洗脱,采用高效液相色谱分析。在最优条件下,3种BZDs在4.0~1000 ng/mL范围内线性关系良好（r=0.999）,检出限（S/N=3）和定量限（S/N=10）分别为1.0~1.2 ng/mL和3.3~4.0 ng/mL;在10、25和50 ng/mL加标水平下回收率为81.4%~102%,日内（n=3）和日间（n=3）相对标准偏差分别为1.2%~4.5%和2.5%~8.3%。该整体柱可对尿液中3种BZDs有效净化,且富集达12~15倍。方法构筑的聚合物整体柱制备简单,萃取高效,可成功用于尿液中3种BZDs的分析。     

环孢素A在反相液相色谱中的吸附行为及分离纯化北大核心CSCD

环孢素A(cyclosporine A,CsA)是由11个氨基酸组成的中性环状多肽,是临床拮抗器官和组织移植后排异反应的首选药物。高效液相色谱法广泛应用于CsA的分离分析,开展CsA色谱行为的研究是使用制备高效液相色谱纯化CsA的关键。该文首先在C18固定相上比较了CsA在甲醇-水和乙腈-水两种流动相体系中的保留行为,结果表明其保留时间对有机相比例变化比较敏感。控制甲醇比例在84%~88%,或者乙腈比例在75%~85%,CsA的保留因子(k)在3~7范围内。考察了上样量对CsA峰形的影响。随着上样量增加,在两种流动相体系中,CsA的峰形都由对称开始变得拖尾,保留时间前移。因此在进行CsA纯化时,需要特别注意前杂的去除情况。然后采用吸附等温线描述CsA的保留行为,当流动相中CsA的质量浓度较低时,有机相比例对溶质在固定相上的吸附量影响并不明显。随着溶质的质量浓度增加至0.5 g/L以上,有机相比例降低有助于提高CsA在固定相上的吸附量。和甲醇-水体系相比,在乙腈-水体系中固定相对溶质有更大的吸附容量。用模型对CsA的等温吸附曲线拟合,在甲醇-水体系中符合Langmuir模型,在乙腈-水体系中为Moreau模型。由模型参数可知在两种体系下,CsA在C18固定相上均为单层吸附,区别在于乙腈-水体系中CsA会产生较大的分子间作用力。最后,实验采用0~60 min 65%~75%乙腈、60~80 min 75%乙腈的条件开展了环孢素A纯化的探索实验,可将CsA的杂质控制在0.2%以下。本研究结果对采用制备高效液相色谱纯化CsA具有指导意义。     

The controlled release behavior and pH‐ and thermo‐sensitivity of alginate/poly(vinyl alcohol) blended hydrogels

Poly(vinyl alcohol) (PVA) was blended with sodium alginate (Alg) in various ratios and crosslinked with calcium chloride and made into hydrogel membranes. The dependence of the swelling behavior of these Alg‐Ca/PVA hydrogels on pH was investigated. The temperature‐dependent swelling behavior of the semi‐interpenetrating network (semi‐IPN) hydrogels was examined at temperatures from 2 to 45°C and the enthalpy of mixing (ΔH_mix) was determined at various temperatures. The molecular structure of the hydrogels was studied by infrared spectroscopy and their water structure in the semi‐IPN hydrogels was measured by differential scanning calorimetry (DSC). The influence of Ca²⁺ content on the network structure of Alg‐Ca/PVA hydrogels was investigated in terms of the compressive elastic modulus, effective crosslinking density, and the polymer–solvent interaction parameter based on the Flory theory. The loading of alizarin red S (ARS) followed the Langmuir isotherm mechanism and the release kinetics of ARS from the Alg‐Ca/PVA hydrogels followed the Fickian diffusion mechanism. Copyright © 2008 John Wiley & Sons, Ltd.     

Study of CO adsorption on perfect and defective pyrite(100)surfaces by density functional theory

First-principles calculations based on density functional theory (DFT) and the generalized gradient approximation (GGA) have been used to study the adsorption of CO molecule on the perfect and defective FeS 2 (100) surfaces. The defective Fe 2 S(100) surfaces are caused by sulfur deficiencies. Slab geometry and periodic boundary conditions are employed with partial relaxations of atom positions in calculations. Two molecular orientations, Cand O-down, at various distinct sites have been considered. Total energy calculations indicated that no matter on perfect or deficient surfaces, the Fe position is relatively more favored than the S site with the predicted binding energies of 120.8 kJ/mol and 140.8 kJ/mol, respectively. Moreover, CO was found to be bound to Fe atom in vertical configuration. The analysis of density of states and vibrational frequencies before and after adsorption showed clear changes of the C–O bond.