Electrochemical synthesis of gold nanocrystals and their 1D and 2D organization

Size-controlled gold nanocrystals were conveniently synthesized through direct electroreduction of bulk AuCl(4)(-) ions in the presence of poly(N-vinylpyrrolidone) (PVP). PVP greatly enhanced the gold particle formation process and also significantly retarded the gold electrodeposition process, allowing the electrochemical synthesis of gold nanocrystals to be carried out in the form of simple electroreduction. This novel electrochemical method may be extended to synthesis of other noble metal nanoparticles with controllable size on a large scale. The PVPK90-protected gold nanocrystals spontaneously self-assembled into nearly ordered 2D close-packed arrays and interesting 1D nanostructures. The aggregation of unstable PVPK17-protected gold nanocrystals resulted in the formation of ultrathin single-crystalline films. PVP plays multifunctional roles in controlling the size and shape of gold nanocrystals and in inducing individual gold nanocrystals to construct 1D nanostructures. The nanoparticle self-assembling technique based on PVP offers a simple, but effective, path to organize individual gold nanoparticles into various 1D and 2D nanostructured materials.     

A facile "dispersion-decomposition" route to metal sulfide nanocrystals

In this paper, we demonstrate a simple and general "dispersion-decomposition" approach to the synthesis of metal sulfide nanocrystals with the assistance of alkylthiol. This is a direct heating process without precursor injection. By using inorganic metal salts and alkylthiol as the raw materials, high-quality Ag(2)S, Cu(2)S, PbS, Ni(3)S(4), CdS, and ZnS nanocrystals were successfully synthesized. The mechanism study shows that the reaction undergoes two steps. A key intermediate compound, metal thiolate, is generated first. It melts and disperses into the solvent at a relatively low temperature, and then it decomposes into metal sulfide as a single precursor upon heating. This method avoids using toxic phosphine agent and injection during the reaction process. The size and shape of the nanocrystal can be also controlled by the concentration of the reactant and ligands. Furthermore, the optical properties and assembly of the nanocrystals have also been studied. This report provides a facile, direct-heating "dispersion-decomposition" approach to synthesize metal sulfides nanocrystals that has potential for future large-scale synthesis.     

溶剂热合成单分散硫化镉纳米晶

在双表面活性剂十八胺和油酸存在条件下, 以氯化镉和硫粉作为反应前驱物, 通过简单的溶剂热方法合成单分散性闪锌矿硫化镉纳米晶, 粒径大小在13 nm. 用X射线衍射(XRD)、透射电子显微镜(TEM)对产物的结构和形貌进行了表征, 同时对硫化镉纳米晶的紫外吸收谱和光致发光谱(PL)性能进行了表征. 实验结果表明合成的样品具有很好的发光性能, 此外溶剂热反应的温度对纳米晶的单分散性有重要影响. 并对硫化镉纳米晶的形成机理做了初步的研究.     

One-step nanocasting synthesis of highly ordered single crystalline indium oxide nanowire arrays from mesostructured frameworks

A one-step nanocasting route has been demonstrated to prepare highly ordered single-crystal indium oxide nanowire (IONW) arrays with mesostructured frameworks. Unlike the reported multistep nanocasting process (synthesis of mesoporous materials, and then incorporation of precursors and formation of inorganic frameworks), a highly ordered mesostructured surfactant-silica monolith with low external surface serves as both the template and the reducing agent and makes the formation of single-crystal IONWs in its channels easily in one step by using normal In(NO(3))(3) as an inorganic precursor. After silica is removed, highly ordered uniform single-crystal IONW arrays with hexagonal (p6mm) or cubic (Ia3d) mesostructures are derived. These new materials are studied by XRD, SEM, TEM, N(2) adsoption, and UV spectrum. Furthermore, this one-step nanocasting synthesis route is a generalized method and can be used to synthesized a highly ordered mesoporous silica monolith with metal oxide nanocrystals in its channels. To the best of our knowledge, this is the first report of a single crystalline mesostructured In(2)O(3) framework.     

从纳米晶到三维超晶格结构

纳米晶的有序组装对未来纳米材料的应用拓展具有重要意义. 本综述介绍了纳米晶三维超晶格的研究价值以及制备方法,着重对“胶体溶液蒸发”、“不良溶剂扩散”、“胶束引导集聚”、“氢键连接”、“静电聚集”、“DNA导向”、“外场辅助”和“水－油界面辅助”的组装机制进行了总结与评述,同时也探讨了这一新兴领域中仍然存在的挑战.     

Roles of amorphous calcium phosphate and biological additives in the assembly of hydroxyapatite nanoparticles

Potential mechanisms for formation of highly organized biomineralized structures include oriented crystal growth on templates, the aggregation of nanocrystals by oriented attachment, and the assembly of inorganic nanoparticles mediated by organic molecules into aggregated structures. In the present study, the potential role of amorphous calcium phosphate (ACP) in facilitating the assembly of hydroxyapatite (HAP) nanoparticles into highly ordered structures was evaluated. The physical characteristics of HAP nanoparticles prepared by three different methods were analyzed after extended exposure to additives in solution. Higher order HAP architecture was detected only when the starting particles were aggregates of nanospheres with HAP cores and ACP shells. Enamel-like HAP architecture was produced when the biologic additive was 10 mM glycine or 1.25 microM amelogenin. Large platelike crystals of the type present in bone were induced when the additive was 10 mM glutamic acid. Surface ACP initially links the HAP nanoparticles in a way that allows parallel orientation of the HAP nanoparticles and then is incorporated into HAP by phase transformation to produce a more highly ordered architecture with features that are characteristic for HAP in biologic structures. These studies provide evidence for a new mechanism for assembly of biominerals in which ACP functions by linking HAP nanocrystals while they assume parallel orientations and then is incorporated by phase transformation into HAP molecules that rigidly link HAP nanocrystals in larger fused crystallites. Biologic molecules present during this process of biomineral assembly specifically regulate the assembly kinetics and determine the structural characteristics of the final HAP architecture.     

油炸圈饼状Cd(OH)2微结构的合成与可控生长机理

聚丙烯酰胺（PAM）表面活性剂的作用下,在温和的低温水溶液中,合成了Cd(OH)2油炸圈饼状微米结构。这种结构是由单晶结构的六方片状Cd(OH)2按一定排列方式自组装而成。在羰基修饰的PAM（PAM-COOH）表面活性剂作用下,得到中心有孔的油炸圈饼纳米结构。可能的生长机理为表面活性剂控制下Cd(OH)2纳米片经历有序连接过程,最终形成油炸圈饼状结构。聚合物诱引晶体生长与调控纳米晶自组装将提供了一条有效的路径来合成具有复杂形貌与特殊结构的无机和无机-有机杂化材料。     

Facile solution route to vertically aligned, selective growth of ZnO nanostructure arrays

For any future cost-effective applications of inorganic nanostructures, in particular, hybrid photovoltaic cells, it is essential that these inorganic nanomaterials be solution processable and selectively printable. This letter reports the selective growth of single-crystal ZnO nanostructures based on the microcontact printing of an inorganic nanocrystal seeding film. The pattern-transfer quality is dependent on the concentration of the inking solution. Variable yet controllable anisotropic growth of ZnO nanowires has been demonstrated on the transferred patterns of ZnO nanocrystal films. The patterning and growth of these highly ordered arrays of ZnO nanostructures employ a simple soft lithography technique and mild reaction conditions at low temperature and in the absence of harmful organic additives.     

Directly assembling ligand-free ZnO nanocrystals into three-dimensional mesoporous structures by oriented attachment

Mesoporous materials have found a great number of important utilities due to their well-defined pore structure and high internal surface area, which are routinely synthesized with the assistance of block copolymers or templates. So far, a key challenge is how to assemble directly ligand-free inorganic nanocrystals into mesoporous structures, so that the high surface activity of ligand-free nanocrystals is not destroyed by further treatment to remove organic species or templates. In this paper, we report the direct assembly of highly uniform ZnO mesoporous ellipsoids from ligand-free ZnO nanocrystals of ～5 nm. The size of the synthesized uniform ZnO mesoporous ellipsoids can be efficiently tuned from 132 × 75 to 190 × 111 nm (length × width), by varying the size and concentration of primary ZnO nanocrystal building blocks and the composition of the designed assembling solvent. The BET detection indicates that these ZnO mesoporous ellipsoids have high specific surface areas reaching to 136.57 m(2)/g, while their average BJH pore diameters are located at 8.8 nm. Especially, the high-resolution TEM images and XRD analysis revealed the occurrence of an oriented attachment mechanism in the assembly of uniform ZnO mesoporous ellipsoids, which supplied an important proof for the possibility of constructing stable three-dimensional structures by oriented attachment. The benefits of these ZnO mesoporous ellipsoids were demonstrated by their excellent photocatalytic activity under weak UV irradiation.     

纳米晶取向接合生长动力学研究及其在量子点发光性质调控中的应用

对晶体生长机制、动力学与微结构衍化的认识是实现纳米材料的尺寸和形貌可控制备的基础．以表面溶解沉积为特征的奥斯特瓦尔德熟化（0R）理论常用来解释传统的晶体生长过程．在该生长模式下,纳米晶体的生长呈现出小颗粒溶解而大颗粒逐渐长大的特征．在纳米材料体系,近来还发现了一种重要的新的晶体生长模式——“取向接合（OA）”机制,在该机制下,两个晶格取向一致的初级纳米颗粒可通过直接接合和结构调整,从而长成一个新的晶体．这一机制已被证实在许多纳米材料体系中广泛存在,并对所合成的纳米材料的形貌、微结构具有非常显著的影响,在构筑新型纳米结构方面具有潜在的优势．本文我们首先回顾了OA生长机制的认识历程和这一机制对材料科学的重大意义;进而,基于我们的研究工作系统介绍了OA生长动力学模型的建立与发展,进一步阐述了这一机制的微观过程及其对材料内部缺陷的特殊影响,深入地分析和讨论了表面包裹的强弱、表面作用的性质对OR机制和OA机制的抑制和调控作用;基于上述表面包裹可调控纳米材料的生长机制的认识,我们结合近期研究结果,从动力学角度分析了量子点的生长机制与其发光特性的内在关联,阐明了表面包裹调控量子点的发光性质的本质原因,为制备不同发光特征的量子点及理解其发光性质衍化规律提供了重要的理论指引．     

Photoexcited Carrier Transfer in CuInS2 Nanocrystal Assembly by Suppressing Resonant-Energy Transfer

High-density assemblies or superlattice structures composed of colloidal semiconductor nanocrystals have attracted attention as key materials for next-generation photoelectric conversion devices such as quantum-dot solar cells. In these nanocrystal solids, unique transport and optical phenomena occur due to quantum coupling of localized energy states, charge-carrier hopping, and electromagnetic interactions among closely arranged nanocrystals. In particular, the photoexcited carrier dynamics in nanocrystal solids is important because it significantly affects various device parameters. In this study, we report the photoexcited carrier dynamics in a solid film of CuInS₂ nanocrystals, which is one of the potential nontoxic substitutes with Cd- and Pb-free compositions. Meanwhile, these subjects have been extensively studied in nanocrystal solids formed by CdSe and PbS systems. A carrier-hopping mechanism was confirmed using temperature-dependent photoluminescence spectroscopy, which yielded a typical value of the photoexcited carrier-transfer rate of (2.2±0.6)×10⁷ s⁻¹ by suppressing the influence of the excitation-energy transfer.     

Shape‐Controlled Synthesis of Metal Nanocrystals: Simple Chemistry Meets Complex Physics?

Nanocrystals are fundamental to modern science and technology. Mastery over the shape of a nanocrystal enables control of its properties and enhancement of its usefulness for a given application. Our aim is to present a comprehensive review of current research activities that center on the shape‐controlled synthesis of metal nanocrystals. We begin with a brief introduction to nucleation and growth within the context of metal nanocrystal synthesis, followed by a discussion of the possible shapes that a metal nanocrystal might take under different conditions. We then focus on a variety of experimental parameters that have been explored to manipulate the nucleation and growth of metal nanocrystals in solution‐phase syntheses in an effort to generate specific shapes. We then elaborate on these approaches by selecting examples in which there is already reasonable understanding for the observed shape control or at least the protocols have proven to be reproducible and controllable. Finally, we highlight a number of applications that have been enabled and/or enhanced by the shape‐controlled synthesis of metal nanocrystals. We conclude this article with personal perspectives on the directions toward which future research in this field might take.     

Cd基化合物纳米晶-有机聚合物杂化太阳能电池研究进展

有机-无机杂化太阳能电池因其结合了有机材料和无机材料各自的优势而引起了人们的广泛关注和研究. Cd基化合物纳米晶因其具有制备方法简单、尺寸及形貌可控、载流子迁移率高和稳定性好等优点而成为最早被研究的一类无机受体. 本文介绍了有机-无机杂化太阳能电池的结构及原理, 分析了影响有机-无机杂化太阳能电池效率的三个主要因素, 分别是开路电压(V_oc)、短路电流(J_sc)和填充因子(FF). 从改善Cd基化合物纳米晶的合成方法, 增加Cd基化合物纳米晶和有机聚合物间的界面接触, 以及优化Cd基化合物纳米晶和有机聚合物所用溶剂和所占比例等方面阐述了近年来Cd基化合物纳米晶-有机聚合物杂化太阳能电池的研究进展. 并展望了Cd基化合物纳米晶-有机聚合物杂化太阳能电池的发展方向.     

Controlled synthesis of semiconductor nanostructures in the liquid phase

The microstructure (composition, size and shape etc.) of semiconductor nanocrystals determine the electronic density of states of semiconductor nanomaterials and ultimately determine their optical and electrical properties. Semiconductor nanocrystal advanced structures, such as hybrid nanostructures and nanocrystal superlattices, not only integrate the function of individual nanocrystals, but also brings the materials collective and synchronic properties. How to control the monodispersity, composition and structure of as-prepared semiconductor nanocrystals during their syntheses, as well as their furthermore assembly, has been a hot research area in this decade. This critical review focuses on the development of synthetic and assembly methods (techniques) of semiconductor nanocrystals processed in the liquid phase. Emphasis is on the synthesis methodology, microstructure related properties of semiconductor nanocrystals, and their applications (243 references).     

Chiral nematic phase formation by aqueous suspensions of cellulose nanocrystals prepared by oxidation with ammonium persulfate

There is continuing interest in the growing family of nanocellulosic materials prepared from plant cell wall material. While most of the research on cellulose nanocrystals has focused on the product of sulfuric acid hydrolysis stabilized by surface sulfate half-esters, cellulose nanocrystals with surface carboxyl groups have also been prepared by oxidation of lignocellulosic materials with ammonium persulfate. The major difference is that the persulfate oxidation leads to nanocrystals stabilized by surface carboxyl groups. Some properties of cellulose nanocrystals from cotton and wood, prepared by persulfate oxidation, are compared with those observed for nanocrystals prepared by sulfuric acid hydrolysis. Evidence from polarized light microscopy showed that the nanocrystal suspensions prepared by persulfate oxidation also form chiral nematic ordered phases in water.     

Synthesis of colloidal uranium-dioxide nanocrystals

In this paper, we have developed an organic-phase synthesis method for producing size-controlled, nearly monodispersed, colloidal uranium-dioxide nanocrystals. These UO2 nanocrystals are potentially important to applications such as nuclear fuel materials, catalysts, and thermopower materials. In addition, we have systematically mapped out the functions of the solvents (oleic acid, oleylamine, and 1-octadecene) in the synthesis, and we found that N-(cis-9-octadecenyl)oleamide-a product of the condensation of oleic acid and oleylamine-can substantially affect the formation of UO2 nanocrystals. Importantly, these results provide fundamental insight into the mechanisms of UO2 nanocrystal synthesis. Moreover, because a mixture of oleic acid and oleylamine has been widely used in synthesizing a variety of high-quality metal or metal-oxide nanocrystals, the results herein should also be important for understanding the detailed mechanisms of these syntheses.     

Low‐Temperature Synthesis of Crystalline Inorganic/Metallic Nanocrystal‐Halloysite Composite Nanotubes

We have demonstrated a facile approach for the low‐temperature synthesis of crystalline inorganic/metallic nanocrystal‐halloysite composite nanotubes by employing the bulk controlled synthesis of inorganic/metallic nanocrystals on halloysite nanotubes. The halloysite clay nanotubes can adsorb the target precursor and induce inorganic/metallic nanocrystals to grow in situ. The crystalline phase and morphology of the composite clay nanotubes is tunable. By simply tuning the acidity of the titania sol, the crystalline titania‐clay nanotubes with tunable crystalline phases of anatase, a mixture of anatase and rutile or rutile are achieved. The approach is general and has been extended to synthesize the representative perovskite oxide (barium and strontium titanate)‐halloysite composite nanotubes. Metallic nickel nanocrystal can also be grown on the surface of halloysite nanotubes at low temperature. The traditional thermal treatment for crystallite transformation is not required, thus intact contour of halloysite nanotubes and the crystallinity structure of halloysite nanotubes can be guaranteed. The combined properties from inorganic/metallic nanocrystal (high refractive index, high dielectric constant and catalytic ability) and the halloysite clay nanotubes are promising for applications such as photonic crystals, high‐k‐gate dielectrics, photocatalysis and purification.     

Ultrafast Charge Transfer and Upconversion in Zinc β‐Tetraaminophthalocyanine‐Functionalized PbS Nanostructures Probed by Transient Absorption Spectroscopy

We functionalize PbS nanocrystals with the organic semiconductor Zn β‐tetraaminophthalocyanine to design a nanostructured solid‐state material with frequent organic–inorganic interfaces. By transient absorption and fluorescence spectroscopy, we investigate the optoelectronic response of this hybrid material under near‐infrared excitation to find efficient charge transfer from the nanocrystals to the molecules. We demonstrate that the material undergoes cooperative sensitization of two nanocrystals followed by photon upconversion and singlet emission of the organic semiconductor. The upconversion efficiency resembles that of comparable systems in solution, which we attribute to the large amount of interfaces present in this solid‐state film. We anticipate that this synthetic strategy has great prospects for increasing the open‐circuit voltage in PbS nanocrystal‐based solar cells.     

Synthesis of Plasmonic Group‐4 Nitride Nanocrystals by Solid‐State Metathesis

Ceramic nanoparticles that exhibit a plasmonic response are promising next‐generation photonic materials. In this contribution, a solid‐state metathesis method has been reported for the synthesis of Group 4 nitride (TiN, ZrN, and HfN) nanocrystals. A high‐temperature (1000 °C) reaction between Group 4 metal oxide (TiO₂, ZrO₂, and HfO₂) nanoparticles and magnesium nitride powder yielded nitride nanocrystals that were dispersible in water. A localized surface plasmonic resonance was observed in the near‐infrared region for TiN and in the visible region of light for ZrN and HfN nanocrystals. The frequency of the plasmon resonance was dependent on the refractive index of the solvent and the nanocrystal size.     

Solvothermal synthesis of zincblende and wurtzite CuInS2 nanocrystals and their photovoltaic application

We report a simple solvothermal synthesis approach to the growth of CuInS(2) nanocrystals with zincblende- and wurtzite-phase structures. Zincblende nanocrystals with particle sizes of 10-20 nm were produced using oleylamine as the solvent. When ethylenediamine was used as the solvent, similarly sized wurtzite nanocrystals with some degree of particle aggregation were formed. Use of a mixture of these solvents gave products with mixed phases including some polyhedral nanostructures. The crystal phases of these nanocrystals were carefully determined by X-ray diffraction and transmission electron microscopy analysis. All the samples exhibit strong absorption from the entire visible light region to the near-infrared region beyond 1300 nm. Pure-phase zincblende and wurtzite CuInS(2) nanocrystals were employed as ink in the fabrication of solar cells. The spray-coated nanocrystal layer was subjected to a selenization process. A power conversion efficiency of ~0.74% and a good external quantum efficiency profile over broad wavelengths have been measured. The results demonstrate that wurtzite and zincblende CuInS(2) nanocrystals may be attractive precursors to light-absorbing materials for making efficient photovoltaic devices.