H2(v=3)+H2(He)碰撞中的转动能量转移

激发态Na2与H2碰撞,使H2(v=3,J=3)得到布居,在H2和He总气压为800Pa及温度为700K的条件下,利用相干反斯托克斯拉曼散射（CARS）光谱技术研究了H2(3,3)与H2(He)间转动能量转移过程。改变CARS激光束与激发Na2的激光之间的延迟时间,测量He不同摩尔配比时H2(3,J)态CARS谱强度的时间演化,得到H2(3,3)的总弛豫速率系数分别为=(21±5)×10-13cm3s-1和=(5.6±1.6)×10-13cm3s-1。测量H2(3,J)各转动态的相对CARS谱强度,由速率方程分析,得到H2(3,3)+H2→H2(3,J)+H2中,对于J=2,4,转移速率系数分别为11±4和8.2±3.1cm3s-1。在H2(3,3)+He→H2(3,J)+He中,对于J=2,4,转移速率系数分别为3.1±1.2和2.1±0.7cm3s-1。对于H2(3,3),单量子弛豫׀∆J׀=1约占该态总弛豫率的90%。     

Cs(6P)+(Ne,N2)碰撞能量转移

在气体样品池条件下,研究了Cs(6P3/2) (Ne,N2)碰撞能量转移过程.用调频半导体激光器激发Cs原子至Cs(6P3/2)态,在不同的Ne或N2气压下,测量了直接6P3/2→6S1/2荧光和转移6P1/2→6S1/2荧光,对于6P3/2与Ne的碰撞,电子态能量仅能转移为Ne原子的平动能.在与N2的碰撞中,向分子振转态的转移是重要的.利用速率方程分析,可以得到碰撞转移速率系数,对于Ne,6PJ精细结构碰撞转移速率系数为1.45×10-12cm3·s-1.对于N2,测量6P Ne和6P N2二种情况下荧光的相对强度比,确定精细结构速率系数为1.64×10-12cm3·s-1,6P态猝灭速率系数为4.88×10-12cm3·s-1.     

Cs(8S)态的碰撞转移和高位原子态的激发

在Cs蒸气中,二步激发Cs原子至8S态,研究了其碰撞转移和高位原子态的产生过程.在1016～1017 cm-3密度范围内,测量了碰撞激发转移8S 6S→6D 6S的速率系数.由测得的荧光强度随密度的变化关系,得到k6D=(2.4±0.5)×10-10 cm3·s-1.同时研究了碰撞能量合并过程5D 5D→nL 6S(nL=9D,11S,7F),5D态是由8S→7P→5D的辐射跃迁产生的.由以前测量过的6P 5D 6S 7D的转移速率系数以及6P态的原子密度,结合荧光强度比得到碰撞能量合并过程的速率系数,对于9D,11S和7F各态,其平均值分别为(6.4±3.2)×10-10,(1.0±0.5)×10-10和(8.4±4.2)×10-10 cm3·s-1.     

K-Cs混合蒸气中K(4P)+Cs(5D)碰撞能量合并

测量了K- Cs混合蒸气中碰撞能量合并过程K(4P) +Cs(5D)→Cs(6S) +K(4D ,6S)速率系数,测量是相对于已知速率系数的过程[即Cs(6P) +Cs(5D)→Cs(6S) +Cs(7DJ) ]进行的。利用激光光解K2 和Cs2分子,得到Cs(6P ,5D)和K(4P)态原子,探测直接由光解离产生的原子发射的与由碰撞转移而布居的原子激发态发射的荧光的相对强度,结合Cs(6P)和K(4P)态的有效寿命,得到异核碰撞能量合并速率系数分别为2. 6×10 -9和3 .6×10 -9cm3 ·s-1。讨论了其他过程对速率系数的影响。     

激发态Cs(5D)原子间碰撞能量转移

用激光二步激发Cs原子至8S态,从谱线的波长及强度可以确定Cs原子的辐射及碰撞过程,5D态主要是由8S→7P→5D跃迁布居的.在1016-1017Cs密度范围内,测量了碰撞能量合并5D 5D→nL 6S(nL=9D,11S,7F)速率系数,因5D→6P(3.0-3.6μm)处于红外本实验不能探测,利用一个已经测量过的过程(即6P 5D→6S 7D)作相对测量,对于9D,11S和7F态,其平均速率系数分别为(8.4±4.2)×10-10,(7.3±3.6)×10-10和(9.7±4.8)×10-10cm3s-1.讨论了碰撞转移过程11S 6S 7F 6S对速率系数的影响.     

激光激发Cs+H_2系统形成CsH分子机理的实验研究

在Cs-H2混合系统中用激光将Cs原子激发到6P3/2能级,研究了CsH分子的形成机制.利用光学吸收法得到6P3/2态的密度及其空间分布,能量合并过程6P3/2+6P3/2→6D+6S1/2产生6D态原子;猝灭过程Cs(6P3/2)+H2(v=0)→Cs(6S1/2)+H2(v=2)产生H2(v=2)态.由6P3/2态原子密度及6D→6P3/2与6P3/2→6S1/2的荧光比得到碰撞能量合并速率系数,在不同的H2密度下,测量了转移荧光强度I895,得到了H2(2,J)态的产生速率系数kH2(2,J)=1.     

Cs(6D_J)+(H_2,H_e)的反应与非反应碰撞能量转移

在样品池条件下,利用原子荧光光谱方法,测量了Cs(6DJ)与H2,He碰撞中的反应与非反应能量转移截面.利用脉冲激光886nm线双光子激发Cs(6S)到Cs(6D3/2)态,原子荧光中除含有6D3/2→6P的直接荧光外,还含有6D5/2→6P的转移荧光.利用三能级模型的速率方程分析,在不同的He和H2密度下,分别测垦直接荧光与转移荧光的时间积分荧光强度比,得到了6D3/2与H2和He碰撞的精细结构转移截面分别为σ=(55±13)×10-16和(16±4)×10-16 cm2,同时确定了6D5/2与H2和He的碰撞猝灭速率系数.6D5/2态与H2的碰撞猝灭速率系数比6D5/2与He的大,它是反应与非反应速率系数之和,利用实验数据确定非反应速率系数为6.3×10-10 cm3·s-1,得到6D5/2与H2的反应截面为(2.0±0.8)×10-16 cm2.利用不同H2(或He)密度下6D5/2→6P3/2时间积分荧光强度,得到6D3/2与H2反应截面为(4.0±1.6)×10-16 cm2,6D3/2与H2反应的活性大于6D5/2.     

碰撞能量转移Cs(6P)+Cs(5D)→Cs(6S)+Cs(nL=9S,5F)的截面测量

二步激发Cs原子至8S态,测量了碰撞转移过程Cs(6P)+Cs(5D)→Cs(6S)+Cs(nL=9S,5F)的截面,测量由7D,9S和5F态发射的荧光强度,从荧光强度比和σ(7D)值得到了σ(9S)和σ(5F),而σ(7D)已经进行过绝对测量,截面值σ(9S)和σ(5F)分别为8.7×10-15和1.3×10-14?cm2.讨论了能量转移过程9S+6S5F+6S对σ(9S)和σ(5F)的影响.     

Cs2分子的光解光谱

利用He-Cd激光器的441.6 nm线光解Cs2分子, 使Cs(n2L)(nL=7P, 6D)态得到布居, 在Cs密度1到9×1015 cm-3范围内测量原子荧光对分子荧光强度比, 得到碰撞转移率系数对解离率之比分别为2.9×10-17和7.4×10-18 cm3. 测定Cs nLJ对nLJ'荧光分支比, 得到72P, 62D态精细结构解离率之比分别为0.53和0.43. 从远翼激发得到的精细结构转移截面与从其他激发过程得到的截面结果相符, 给出了碰撞转移到6D态外(即Cs(6D)+Cs(6S)→Cs(6D)以外的态)的截面为1.9×10-14 cm2.     

Rb(5 P_J)+(He、N_2)碰撞能量转移

在气体样品池条件下,研究了Rb(5PJ) (He、N2)碰撞能量转移过程.调频半导体激光器稍微调离共振线,激发Rb原子至Rb(5P3/2)态,在不同的He或N2气压下,测量了直接5P3/2→5S1/2荧光和转移5P1/2→5S1/2荧光.对于5PJ与He的碰撞.电子态能量仅能转移为He原子的平动能.在与N2的碰撞中,向分子振转态的转移是重要的.利用速率方程分析,可以得到碰撞转移速率系数,对于He,5P3/2→5S1/2转移速率系数为2.23×10-12cm3s-1.对于N2,测量5PJ He和5PJ N2二种情况下荧光的相对强度比,利用最小二乘法确定5P3/2→5S1/2转移速率系数为4.38×10-11cm3s-1,5PJ态猝灭速率系数为5.45×10-11cm3s-1.与其他实验结果进行了比较.     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Measurement of nonlinear coefficient of optical fiber based on small chirped soliton transmission

We measure the waveform and phase curves of short optical pulses before and after transmission over different lengths of fibers by use of the pulse analyzer with the frequency-resolved optical gating (FROG),and numerically simulate pulse evolution under the experimental conditions.The nonlinear coefficient of the fiber is given by comparing the experimental results with the numerical ones.Difference between the experiment and numerical simulation is analyzed.     

Resonance scattering of canonical elastic shells in absorbing fluid medium

Resonance scattering of elastic spherical shell and cylindrical shell while the surrounding fluid medium has absorption is studied. The normal mode solution derived using exact elastic theory and the separation of variables is still applicable. However, the scattering form function has to be modified for the absorbing medium, otherwise the unreasonable result would be obtained. The backscattering form function in the absorbing medium is redefined, and the form function of elastic spherical and cylindrical shell with vacuum or solid matter filled is calculated in various absorption conditions. The results show that the absorption of surrounding fluid leads to notable attenuation of the coincidence resonances in the mid-frequency, but it has a little influence on the low-frequency resonance scattering induced by the filler inside the shell.     

Single-beam self-referenced phase-sensitive surface plasmon resonance sensor with high detection resolution

A versatile and low-cost single-beam self-referenced phase-sensitive surface plasmon resonance(SPR)sensing system with ultra-high resolution performance is presented.The system exhibits a root-mean-square phase fluctuation of ±0.0028.over a period of 45 min.i.e.a resolution of±5.2×10-9 refractive index units.The enhanced performance has been achieved through the incorporation of three design elements:a true single-beam configuration enabling complete self-referencing so that only the phase change associated with SPR gets detected,a differential measurement scheme to eliminate spurious signals not related to the sensor response,and the elimination of retardation drifts by incorporating temperature stabilization in the liquid crystal phase modulato .Our design should bring the detection sensitivity of non-labeling SPR biosensing closer to that achievable by conventional fluorescence-based techniques.     

Influences of SiO2 protective layers and annealing on the laser-induced damage threshold of Ta2O5 films

Ta2O5 films are prepared on BK7 substrates with conventional electron beam evaporation deposition.The effects of SiO2 protective layers and annealing on the laser-induced damage threshold (LIDT) of the films are investigated.The results show that SiO2 protective layers exert little influence on the electric field intensity(EFI)distribution,microstructure and microdefect density but increase the absorption slightly.Annealing iS effective on decreasing the microdefect density and the absorption of the films.Both SiO2 protective layers and annealing are beneficial to the damage resistance of the films and the latter is more effective to improve the LIDT.Moreover,the maximal LIDT of Ta2O5 films is achieved by the combination of SiO2 protective layers and annealing.     

A stereo matching algorithm using multi-peak candidate matches and geometric constraints

Gray cross correlation matching technique is adopted to extract candidate matches with gray cross correla- tion coefficients less than some certain range of maximal correlation coefficient called multi-peak candidate matches. Multi-peak candidates are extracted corresponding to three closest feature points at first. The corresponding multi-peak candidate matches are used to construct the model polygon. Correspondence is determined based on the local geometric relations between the three feature points and the multi-peak candidates. The disparity test and the global consistency checkout are applied to eliminate the remaining ambiguous matches that are not removed by the local geometric relational test. Experimental results show that the proposed algorithm is feasible and accurate.     

Fiber Modal Index Measurements Based on Fiber Gratings

A novel method based on fiber gratings for measuring the effective indices of fiber modes is proposed. The effective index difference between the core mode and a cladding mode was obtained by analyzing the interference fringe of a pair of cascaded long-period fiber gratings. In order to extract the core mode index from the measured index difference, an index matching oil immersion method is proposed. By analyzing the interaction between the cladding mode and the oil applied on the cladding surface, the mode order and the effective index of the involved cladding mode might be calculated. Experimental results about the interference fringe shifts induced by the oil index and the oil-applied length are also presented.     

Optical Pulse Compression Schemes That Use Nonlinear Bragg Gratings

Nonlinear optical pulse compression of picosecond pulses typically requires long lengths of optical fiber and multiple components. Periodic structures, such as fiber Bragg gratings, are highly dispersive at wavelengths outside of the photonic bandgap. This implies that such gratings can be used as very short all-fiber compressors. In this paper a number of such compression schemes are reviewed involving uniform and nonuniform fiber Bragg gratings, relying on both soliton and nonsoliton compression principles. Experimental results supporting the corresponding underlying theory are also presented. Finally, an extension of one of the compression schemes is shown, which allows the generation of adjustable high-repetition rate soliton trains.