硅胶管采样—液相色谱法测定空气中的氯氰菊酯

本文报道空气中氯氰菊酯的高效液相色谱测定方法，空气样品用硅胶管采样，经甲醇洗脱后用ＨｙｐｏｒｓｉｌＯＤＳ柱分离，紫外检测器检测，在本法的测定条件下，最低检测浓度为０．０４ｍｇ／ｍ＾３，当氯氰菊酯浓度范围为０～２５．０ｍｇ／Ｌ时，呈线性响应关系，相对标准偏差为２．４％～８．４％，本法的解吸效率为９６．８％～１００．３％，采样效率为１００％，氯氰菊酯在硅胶管中可稳定７ｄ。     

塞曼火焰原子吸收光谱法直接快速测定白砂糖中的铜及铅含量

采用标准加入法,消除了基体,背景和粘度的影响,直接用塞曼火焰原子吸收光谱法测定白砂糖中的铜及铅含量。此法具有简便、快速、灵敏度高等优点,相对标准偏差铜为０．６１％－１．９％,铅为０．９４％－３．５％;回收率铜为９８．４％－１０２％,铅为９７．４％－１０４％。     

模糊聚类—催最小二乘回归光度法同时测定地质样品中金铂钯铑的研究

将模糊聚类分析与偏最小二乘法相结合,对地质样品中吸收光谱严重重叠的贵金属多组分体系进行解析,较好地解决了计算光度分析中校准模型的优化问题,使计算结果的精度得到了显著提高,分析结果的相对误差小于１０％,标准偏差小于０．６７,明显优于一般偏最小二乘（ＰＬＳ）法。采用小铳试金法消除样品中贱金属元素的干扰,其回收率为９２％￣１０７％,标准偏差为０．１０￣０．６７;相对标准偏差为４．７％￣１１．０％,并对影     

高纯金中杂质元素的电感耦合高频等离子体原子发射光谱法测定

研究了萃取金后用ＩＣＰ－ＡＥＳ法测定微量Ｐｔ、Ｐｄ、Ｒｈ、Ｉｒ、Ａｇ等２８个杂质元素的方法。元素间的干扰用等效浓度法校正。杂质元素标准加入回收率为７５％～１１８％；相对标准偏差为４．３％～２０％；取样量为２．５ｇ时，测定下限为５×１０＾５％～２×１０＾－４％。     

中药材中拟除虫菊酯类农药残留量的毛细管气相色谱测定方法

首次建立了中药材中氯氰菊酯、氰戊菊酯和溴氰菊酯的提取、净化及其毛细管气相色谱测定法。运用混合溶剂提取,填有Ｆｌｏｒｉｓｉｌ和氧化铝的层析柱净化。样品中氯氰菊酯、氰戊菊酯和溴氰菊酯的添加回收率分别为９４．３０％～９９．３４％,９５．１７％～１０１．５５％和８９．１２％～１００．９７％;ＲＳＤ分别为４．０２％～８．２２％,１．９０％～８．０４％和３．７５％～５．０９％。结果表明,被测样品中除白芍外均含有氰戊菊酯,个别样品中含溴氰菊酯。实验表明,该法具有灵敏度高、选择性强、操作简便、净化效果好、适用性广等特点     

流动注射热焓法测定浸取磷酸中三氧化硫

以测量钡离子与硫酸根离子沉淀反应热效应的热焓法为基础,采用合并带流路建立了测定浸取磷酸中三氧化硫的流动注射热焓法。该法在４．０－４２．０ｇ／Ｌ范围内可准确测定了ＳＯ３的含量。相对标准偏差为１．６％,标准加入回怍率为９６％－１０４％;测样速度为６０样／ｈ。     

Zn—5Br—PAN—6S—Tritox X—100三元体系测定铝合金中微量锌

５Ｂｒ－ＰＡＮ－６Ｓ和Ｔｒｉｔｏｎ Ｘ－１００在ＰＨ８．８－９．０与锌形成三元配合物，其最大吸收峰在５８５ｎｍ处，表观摩尔吸光系数ε５８５为６．０５×１０＾４，在２５ｍＬ显色液中含锌５－３０μｇ，符合比耳定律。用于测定铝合金中微量锌，简便易行，其标准偏差在０．００７－０．０１２之间，相对标准偏差为１．４％－４．１％。     

比值导数波谱-多波长最小一乘回归分光光度法同时测定饮料中糖精钠、苯甲酸和山梨酸

提出了比值导数波谱－多波长最小一乘回归分光光度法。该法能同时测定三组分混合物而毋需零交点波长和等吸收点，且回归稳健性好．可消除异常点的影响。方法用于合成样品和饮料中糖精钠、苯甲酸和山梨酸的同时测定，相对误差＜± ３． ５％，回收率为 ９６． ６％～１０４．４％，相对标准偏差为２．０％～３．１％．     

ICP—AES法测定饲料中钙、磷含量

采用干灰化法处理饲料样品,以全谱直读ICP—AES法对饲料中钙、磷元素进行了测定。结果表明,该法测定钙的相对标准偏差为0．18％～0．76％,测定磷的相对标准偏差为0．37％～1．02％;钙元素的加标回收率为99．6％-100．3％,磷元素的加标回收率为97．8％-100．5％;该法与国家标准比对,结果准确可靠。     

气相色谱法测定化妆品中的 VE 含量

介绍了一种用气相色谱法准确快速测定品中ＶＥ２含量的新方法。该法以ＶＣ作保护剂,用环已烷提取样品,ＳＥＰ－ＰＡＫ ＡＬＵＭ－Ａ小柱净化。以氯氰菊酯内标物,在１？５％ＯＶ＝－１７色谱柱上进行分离,测定化妆口中ＶＥ含量。内标物与样品的分离度为１．５５。平均回收纺为９４．３％～９８．８％,相对标准偏差为１．７％～３．５％（ｎ＝５）。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.