Solid-phase synthesis of peptide and glycopeptide thioesters through side-chain-anchoring strategies

An efficient new strategy for the synthesis of peptide and glycopeptide thioesters is described. The method relies on the side-chain immobilization of a variety of Fmoc-amino acids, protected at their C-termini, on solid supports. Once anchored, peptides were constructed using solid-phase peptide synthesis according to the Fmoc protocol. After unmasking the C-terminal carboxylate, either thiols or amino acid thioesters were coupled to afford, after cleavage, peptide and glycopeptide thioesters in high yields. Using this method a significant proportion of the proteinogenic amino acids could be incorporated as C-terminal amino acid residues, therefore providing access to a large number of potential targets that can serve as acyl donors in subsequent ligation reactions. The utility of this methodology was exemplified in the synthesis of a 28 amino acid glycopeptide thioester, which was further elaborated to an N-terminal fragment of the glycoprotein erythropoietin (EPO) by native chemical ligation.     

Leveraging the Knorr Pyrazole Synthesis for the Facile Generation of Thioester Surrogates for use in Native Chemical Ligation

Facile synthesis of C‐terminal thioesters is integral to native chemical ligation (NCL) strategies for chemical protein synthesis. We introduce a new method of mild peptide activation, which leverages solid‐phase peptide synthesis (SPPS) on an established resin linker and classical heterocyclic chemistry to convert C‐terminal peptide hydrazides into their corresponding thioesters via an acyl pyrazole intermediate. Peptide hydrazides, synthesized on established trityl chloride resins, can be activated in solution with stoichiometric acetyl acetone (acac), readily proceed to the peptide acyl pyrazoles. Acyl pyrazoles are mild acylating agents and are efficiently exchanged with an aryl thiol, which can then be directly utilized in NCL. The mild, chemoselective, and stoichiometric activating conditions allow this method to be utilized through multiple sequential ligations without intermediate purification steps.     

One‐Pot/Sequential Native Chemical Ligation Using N‐Sulfanylethylanilide Peptide

N‐Sulfanylethylanilide (SEAlide) peptides were developed with the aim of achieving facile synthesis of peptide thioesters by 9‐fluorenylmethyloxycarbonyl (Fmoc)‐based solid‐phase peptide synthesis (Fmoc SPPS). Initially, SEAlide peptides were found to be converted to the corresponding peptide thioesters under acidic conditions. However, the SEAlide moiety was proved to function as a thioester in the presence of phosphate salts and to participate in native chemical ligation (NCL) with N‐terminal cysteinyl peptides, and this has served as a powerful protein synthesis methodology. The reactivity of a SEAlide peptide (anilide vs. thioester) can be easily tuned with or without the use of phosphate salts. This interesting property of SEAlide peptides allows sequential three‐fragment or unprecedented four‐fragment ligation for efficient one‐pot peptide/protein synthesis. Furthermore, dual‐kinetically controlled ligation, which enables three peptide fragments simultaneously present in the reaction to be ligated in the correct order, was first achieved using a SEAlide peptide. Beyond our initial expectations, SEAlide peptides have served in protein chemistry fields as very useful crypto‐peptide thioesters. DOI 10.1002/tcr.201200007     

Synthetic procedure for N-fmoc amino acyl-N-sulfanylethylaniline linker as crypto-Peptide thioester precursor with application to native chemical ligation

N-Sulfanylethylanilide (SEAlide) peptides 1, obtainable using Fmoc-based solid-phase peptide synthesis (Fmoc SPPS), function as crypto-thioesters in native chemical ligation (NCL), yielding a wide variety of peptides/proteins. Their acylating potential with N-terminal cysteinyl peptides 2 can be tuned by the presence or absence of phosphate salts, leading to one-pot/multifragment ligation, operating under kinetically controlled conditions. SEAlide peptides have already been shown to be promising for use in protein synthesis; however, a widely applicable method for the synthesis of N-Fmoc amino acyl-N-sulfanylethylaniline linkers 4, required for the preparation of SEAlide peptides, is unavailable. The present study addresses the development of efficient condensation protocols of 20 naturally occurring amino acid derivatives to the N-sulfanylethylaniline linker 5. N-Fmoc amino acyl aniline linkers 4 of practical use in NCL chemistry, except in the case of the proline- or aspartic acid-containing linker, were successfully synthesized by coupling of POCl(3)- or SOCl(2)-activated Fmoc amino acid derivatives with sodium anilide species 6, without accompanying racemization and loss of side-chain protection. Furthermore, SEAlide peptides 7 possessing various C-terminal amino acids (Gly, His, Phe, Ala, Asn, Ser, Glu, and Val) were shown to be of practical use in NCL chemistry.     

Fmoc solid-phase synthesis of peptide thioesters by masking as trithioortho esters

[reaction: see text] Total chemical synthesis of proteins by chemoselective ligation relies on C-terminal peptide thioesters as building blocks. Their preparation by standard Fmoc solid-phase peptide synthesis is made difficult by the lability of thioesters to aminolysis by the secondary amines used for removal of the Fmoc group. Here we present a novel backbone amide linker (BAL) strategy for their synthesis in which the thioester functionality is masked as a trithioortho ester throughout the synthesis.     

HF‐Free Boc Synthesis of Peptide Thioesters for Ligation and Cyclization

We have developed a convenient method for the direct synthesis of peptide thioesters, versatile intermediates for peptide ligation and cyclic peptide synthesis. The technology uses a modified Boc SPPS strategy that avoids the use of anhydrous HF. Boc in situ neutralization protocols are used in combination with Merrifield hydroxymethyl resin and TFA/TMSBr cleavage. Avoiding HF extends the scope of Boc SPPS to post‐translational modifications that are compatible with the milder cleavage conditions, demonstrated here with the synthesis of the phosphorylated protein CHK2. Peptide thioesters give easy, direct, access to cyclic peptides, illustrated by the synthesis of cyclorasin, a KRAS inhibitor.     

Tandem thiol switch synthesis of peptide thioesters via N-S acyl shift on thiazolidine

An efficient "thiol switch" approach for the synthesis of peptide thioesters via an acid-catalyzed N-S acyl shift and a thioester exchange reaction in tandem with concurrent removal of protecting groups is described. This method employs novel 2-(thiomethyl)thiazolidine (TMT)-anchored resins and is fully compatible with Fmoc chemistry.     

Fmoc-SPPS chemistry compatible approach for the generation of (glyco)peptide aryl thioesters

A new approach is described for the general Fmoc-based solid-phase synthesis of (glyco)peptide aryl thioesters. A peptide alkyl oxoester obtained by standard Fmoc-based chain elongation undergoes an O-to-S acyl shift, and is followed by alkyl thioester exchanges with a large excess of aryl thiol, affording the corresponding peptide aryl thioester. The newly developed methodology is useful for the chemical synthesis of post-translationally modified proteins because of its compatibility with standard Fmoc-SPPS conditions. In addition, the peptide aryl thioesters are essential intermediates for chemical synthesis of proteins by kinetically controlled convergent strategy.     

N-Alkyl cysteine-assisted thioesterification of peptides

A new method for the preparation of peptide thioester by the post-solid phase peptide synthesis (SPPS) approach was developed. A series of N-alkyl cysteine derivatives were prepared and used as the C-terminus residue of the peptides prepared by the Fmoc SPPS. The synthetic peptides released from resin by TFA were readily converted to the peptide thioester in aqueous 3-mercaptopropionic acid (MPA) without significant side reactions.     

Facile synthesis of C-terminal peptide hydrazide and thioester of NY-ESO-1 (A39-A68) from an Fmoc-hydrazine 2-chlorotrityl chloride resin

The NY-ESO-1 (A39-A68) peptide hydrazide was prepared through 9-fluorenyl-methoxycarbonyl solid-phase peptide synthesis (Fmoc SPPS) from a new 9-fluorenyl-methoxycarbonyl hydrazine 2-chlorotrityl chloride (Fmoc-hydrazine 2CTC) resin. The new resin was ideal for long-term storage and usage in Fmoc SPPS. Besides, the title peptide hydrazide could be transformed nearly quantitatively into the corresponding peptide thioester, which was both isolable and usable directly in native chemical ligation (NCL).     

Novel diphenylmethyl-Derived Amide Protecting Group for Efficient Liquid-Phase Peptide Synthesis: AJIPHASE

An efficient method for the synthesis of peptides bearing an amide at the C-terminal is described. This method involves the attachment of a C-terminal protecting group bearing long aliphatic chains, followed by the repetition of simple reaction and precipitation steps with the combined advantages of liquid-phase peptide synthesis (LPPS) and solid-phase peptide synthesis (SPPS). Using this method, a hydrophobic peptide was successfully synthesized in good yield and high purity, which cannot be obtained satisfactorily by SPPS.     

Facile, fmoc-compatible solid-phase synthesis of peptide C-terminal thioesters

A short route to peptide C-terminal thioesters was developed that does not require the use of special linkers or resins and is compatible with standard Fmoc chemistry. Following conventional solid-phase peptide synthesis, an excess of Me(2)AlCl and EtSH in dichloromethane cleaves peptides from Wang or Pam resins to give the corresponding thioesters directly in good yield and purity.     

Peptide dithiodiethanol esters for in situ generation of thioesters for use in native ligation

A new approach is described for the general Fmoc-based solid-phase synthesis of C-terminal peptide (thio)esters. One hydroxy group of 2,2-dithiodiethanol (used in large excess) was anchored on trityl resin, and the remaining hydroxy group was loaded with the first amino acid. Standard chain elongation and TFA-based peptide release yielded peptide C-terminal dithiodiethanol esters in good purities. Under standard conditions of native chemical ligation (excess thiol, neutral pH), the dithiodiethanol function is presumably reduced and rearranged (or equilibrated) to the thioester via a 5-membered intermediate. The resulting thioesters are shown to undergo native chemical ligation with N-terminal cysteine peptides. Notably, hydrolysis of the reduced ester is a major competing reaction, especially in the presence of 6 M guanidinium chloride, which is often required for solubilization of large peptide fragments.     

Application of Pac Ester in Thioester Method for the Synthesis of Cyclopentapeptides

Thioester method for the synthesis of cyclopeptides is improved by using Pac (Pac = phenacyl, CH2COC6Hs) ester as a protecting group of 3-mercaptopropionic acid. The Pac group is easy to be removed from C-terminal with zinc in acetic acid. The protected glycine thioester and peptide thioesters synthesized by the improved method, are easy to be purified, so the final linear peptides are pure enough for the following cyclization. Furthermore, this method is flexible for peptide chain elongation,either from C-termlnal or from N.terminal. So it is an efficient and practical method for synthesis of bioactive peptides. Two N-protected pentapeptide thioesters, Boc-Pro-Tyr-Leu-Ala-GIySCH2CH2COOPac and Boc-Ala-Tyr-Leu-Ala-Gly-SCH2CH2COOPac were synthesized by the improved thloester method.After deprotecting Pac ester with zinc in aqueous acetic acid and Boc group with trifluoroacetic acid in CH2C12, two free pentapeptide tldoesters were obtained. Ag^ -assisted cyclization in acetate buffered solution afforded two cyclic pentapeptides c(Pro-Tyr-Leu-Ala-Gly) and c(Ala-Tyr-Leu-Ala-Gly).Effects of different buffer pH, different Ag^ concentrations, etc. on the cyclization were studied.     

Native chemical ligation of thioamide-containing peptides: development and application to the synthesis of labeled α-synuclein for misfolding studies

Thioamide modifications of the peptide backbone are used to perturb secondary structure, to inhibit proteolysis, as photoswitches, and as spectroscopic labels. Thus far, their incorporation has been confined to single peptides synthesized on solid phase. We have generated thioamides in C-terminal thioesters or N-terminal Cys fragments and examined their compatibility with native chemical ligation conditions. Most sequence variants can be coupled in good yields with either TCEP or DTT as the reductant, though some byproducts are observed with prolonged TCEP incubations. Furthermore, we find that thioamides are compatible with thiazolidine protection of an N-terminal Cys, so that multiple ligations can be used to construct larger proteins. Since the acid-lability of the thioamide prohibits on-resin thioester synthesis using Boc chemistry, we devised a method for the synthesis of thioamide peptides with a masked C-terminal thioester that is revealed in situ. Finally, we have shown that thioamidous peptides can be coupled to expressed protein fragments to generate large proteins with backbone thioamide labels by synthesizing labeled versions of the amyloid protein α-synuclein for protein folding studies. In a proof-of-principle experiment, we demonstrated that quenching of fluorescence by thioamides can be used to track conformational changes during aggregation of labeled α-synuclein.     

半胱氨酸肽片段连接法合成ω-芋螺毒素MVIIA

ω-芋螺毒素MVIIA是已上市的镇痛药Ziconotide的有效成分.采用标准Fmoc保护策略在聚苯乙烯树脂上合成ω-MVIIA比较困难,是固相合成中的"困难肽".本研究将ω-MVIIA分为N-端15肽硫酯和C-端10肽两个片段采用标准Fmoc保护策略分别合成,再通过半胱氨酸肽片段连接得到全长的ω-芋螺毒素MVIIA肽链.该方法提高了合成ω-芋螺毒素MVIIA产率.该研究为"困难肽"的合成提供了较好的参考方法.     

Improved synthesis of C-terminal peptide thioesters on "safety-catch" resins using LiBr/THF

[reaction: see text] The alkanesulfonamide "safety-catch" resin has proven useful for Fmoc-based synthesis of C-terminal peptide thioesters. We now report that the yield of isolated thioester can increase significantly when the cleavage reaction is carried out in 2 M LiBr/THF rather than DMF or THF. The largest effects are seen with problematic peptides that aggregate or form secondary structures on the resin.     

Total chemical synthesis of large CCK isoforms using a thioester segment condensation approach

Silver-ion mediated thioester segment condensation was applied to the chemical synthesis of high molecular weight isoforms of cholecystokinin (CCK). Three building blocks, a C-terminal Tyr(SO₃H)-containing segment and two partially protected thioester segments having a C-terminal Pro residue, were prepared using Fmoc-based chemistry and 2-chlorotrityl chloride (Clt) resin as a solid support. The entire peptide chain was successfully synthesized by two consecutive silver-ion mediated condensation reactions using these building blocks. A brief TFA treatment of the final condensation product gave highly homogeneous CCK-58 in a satisfactory yield. This peptide exhibited glucose-dependent insulinotropic activity at levels comparable to CCK-33. These results demonstrate the usefulness of the silver-ion mediated segment condensation approach in the preparation of large sulfated peptides.     

Fmoc synthesis of peptide thioesters without post-chain-assembly manipulation

An operationally simple method for the synthesis of peptide thioesters is developed using standard Fmoc solid-phase peptide synthesis procedures. The method relies on the use of a premade enamide-containing amino acid which, in the final TFA cleavage step, renders the desired thioester functionality through an irreversible intramolecular N-to-S acyl transfer.     

Recent advances in the preparation of Fmoc-SPPS-based peptide thioester and its surrogates for NCL-type reactions

Solid phase peptide synthesis (SPPS) based on Fmoc chemistry has become a commonly used technique in peptide chemistry, as it can be easily conducted using automated machine, and not requiring highly toxic HF in comparison to Boc-SPPS. With the fast development in the emerging field of protein chemical synthesis, many efforts have been endeavored aiming to find more efficient methods for preparing peptide fragments required in ligation reactions. This review briefly summarizes recent advances in the engineering and modification of Fmoc-SPPS-derived peptides, which can be used as the N-terminal fragments in a native chemical ligation (NCL) or NCL-type ligation reactions.