Scale-up of free flow electrophoresis: I. Purification of alcohol dehydrogenase from a crude yeast extract by zone electrophoresis

The potential and limitations in scaling-up free-flow electrophoresis, with emphasis on zone electrophoresis, are demonstrated. Purification of alcohol dehydrogenase (ADH) from a crude yeast extract was chosen as a model for an industrial approach to enzyme purification. In zone electrophoresis the separation quality strongly depends on the pH and conductivity of the background electrolyte, its residence time and flow rate, as well as the applied voltage. Optimization of these parameters resulted in a purification factor of 5.3 and a yield of 96% ADH, using a Tris/HCl buffer, pH 8.0, and a conductivity of 1 mS/cm, with a residence time of 10 min at 500 V. The loading capacity of the method for a laboratory-sized free-flow electrophoresis apparatus was limited to a sample throughput of about 0.4 g/h. By increasing the chamber dimensions it was possible to purify the enzyme by a purification factor of 4.7 and a yield of 93% ADH, at a throughput of about 1 g total protein/h. By simultaneously applying the sample at 3 input positions the throughput could be increased to 2.75 g/h with a purification factor of 4.7 and an overall yield of 90%.     

Separation of rat pituitary secretory granules by continuous flow electrophoresis

The separation of growth hormone-containing cytoplasmic secretory granules from the rat pituitary gland by continuous flow electrophoresis is described. The results are consistent with the hypothesis that granule subpopulations can be separated due to differences in surface charge; these, in turn, may be related to the oligomeric state of the hormone.     

Separation of nitrophenols by capillary zone electrophoresis

Separation conditions suitable to a rapid resolution of a group of eight nitrophenols by capillary zone electrophoresis (CZE) were found. Required differences in their effective mobilities were achieved via host-guest complexation of -cyclodextrin combined with intermolecular interactions involved by polyvinylpyrrolidone. When both additives were present in the carrier electrolyte at pH=9.1 nitrophenols could be separated in the column of a, 300 m I.D. and 180 mm in the length within 8–9 minutes. It is shown that the column of such an I.D. providing enhanced sample load capacity, can operate with high separation efficiencies as maintaining zone dispersions due to Joule heating on a tolerable level. CZE on-line coupled with isotachophoretic sample pretreatment is shown to provide the concentration limits of detection at low ppb concentrations by using an on-column photometric detector operating at 254 and 405 nm detection wavelengths.     

Free flow electrophoresis as a method for the purification of enzymes from E. coli cell extract

The application of the four techniques of free flow electrophoresis (zone electrophoresis, isotachophoresis, isoelectric focusing and field step electrophoresis) for the purification of proteins from a complex protein mixture was investigated. For this purpose alpha-amylase (EC 3.2.1.1) from Aspergillus oryzae was added and reisolated from E. coli cell extract. The chosen enzyme and the biological extract are models for many industrial separation problems. In optimized experiments purity, purification factor, yield, throughput and efficiency were calculated. The best results were obtained with field step electrophoresis in combination with zone electrophoresis. High purity (0.82 mg enzyme/mg total protein) and high throughput (111 mL sample/h) were achieved using this technique. Field step electrophoresis gave the best throughput (330 mL sample/h), but low purity (0.63 mg enzyme/mg total protein). This technique can also be used for a simple concentration of the sample. With zone electrophoresis a purity of more than 0.95 mg enzyme/mg total protein was obtained, which was the best of all techniques. However, the enzyme concentration was decreased due to dilution with buffer solution after the separation. Isotachophoresis was the most difficult technique, combined with a relatively low recovery of 31% of the enzyme activity. In a purification scheme, free flow electrophoresis is able to substitute one or even several chromatography steps with a negligible loss of biological activity.     

Separation of human fibrinopeptides by capillary zone electrophoresis

We describe a method for the simultaneous determination of the five fibrinopeptide forms derived from the thrombin-promoted activation of human fibrinogen by capillary zone electrophoresis (CZE). The fibrinopeptide mixture was first desalted by a solid-phase extraction (SPE) step. The analysis was performed in reversed polarity in a highly cross-linked polyethylene glycol (PEG)-coated capillary with UV-light absorption detection at 200 nm. Several parameters including buffer concentration and pH, presence of an organic modifier, temperature, and applied voltage, have been tested. The best separations were obtained within 20 min, utilizing a 20 mM sodium phosphate buffer without organic modifier, in the narrow 6.1-6.2 pH range, at 25 degrees C, with an applied voltage of 20 kV. Quantitative analysis is made possible by the use of sheep fibrinopeptide A as an internal standard to correct for both extraction and injection errors.     

Separation of naturally occurring triterpenoidal saponins by capillary zone electrophoresis.

A high-performance capillary electrophoresis (HPCE) was successfully applied to the separation and quantitation of naturally occurring oleanene triterpenoidal saponins. The HPCE adapted to the separation of two pairs of disteriomeric saponins (1-2) or (3-4), obtained from Trifolium alexandrinum seeds, was based on capillary zone electrophoresis (CZE) in borate buffer with UV detection at 195 nm. An usual technique for isolation and group separation of saponins was developed as an appropriate purification step prior to determination of individual saponins by CZE. The separation parameters such as borate concentration, pH and applied voltage were varied in order to find the best compromise that complied with demands for high separation, short duration and sufficiently high detector response. The optimum running conditions were found to be 60 mM borate buffer, pH 10 and 12 kV. Under the alkaline borate electrolyte, no resolution was achieved for the saponins (1 and 3) or (2 and 4) in a single mixture, except when 20 mM beta-cyclodextrin was added to the running electrolyte. With the combined techniques of group separation, purification and CZE, a rapid and efficient method for the determination of naturally occurring diasteriomeric saponins is now available.     

Separation of nicotine metabolites by capillary zone electrophoresis and capillary zone electrophoresis/mass spectrometry

The use of capillary zone electrophoresis (CZE) and capillary zone electrophoresis/mass spectrometry (CZE/MS) has been demonstrated, in principle, for the separation of nicotine and nicotine metabolites. The buffer system developed for separation and detection by CZE/UV was modified for use in CZE/MS analysis. Several of the metabolites are isobaric and tandem mass spectrometric (MS/MS) techniques have been used to differentiate such analytes.     

Separation of flavonoids and phenolic acids from propolis by capillary zone electrophoresis

The simultaneous determination of twelve different flavonoids, pinocembrin, acacetin, chrysin, rutin, catechin, naringenin, galangin, luteolin, kaempferol, apigenin, myricetin, and quercetin, two phenolic acids, cinnamic acid and caffeic acid, and one stilbene derivative, resveratrol, in propolis extracts used in medicine has been investigated by capillary zone electrophoresis (CZE). With a buffer constituted by sodium tetraborate 30 mM, pH 9.0, and 15 kV applied voltage, the 15 polyphenols were separated on an uncoated fused-silica capillary within 40 min using normal polarity. Under the experimental conditions used, a linear relationship was calculated between the CZE migration times and the molecular weight of polyphenols' expression of the increasing amount of their hydroxyl groups and polarity. Regression equations revealed a linear relationship (correlation coefficients > 0.97) between the peak area of each polyphenol species and their concentration, from 6 to 120 ng. The levels of analytes in three different propolis extracts, ethanolic, aqueous-ethanolic and aqueous-glycolic, used to prepare various commercial medicinal products, were determined. The aqueous-ethanolic propolis extract showed a great percentage of caffeic acid, galangin, quercetin, and chrysin, whilst the ethanolic preparation was composed of a great amount of resveratrol, chrysin, and caffeic acid. On the contrary, the aqueous-glycolic propolis preparation was composed of approx. 11% of caffeic acid and a low amount of the other identified flavonoids due to the presence of approx. 85% of nonidentified compounds. CZE represents a valuable method for the qualitative and quantitative assay of the most relevant polyphenol components of propolis, representing an alternative to obtain typical fingerprints of propolis and a reliable identification of a large number of propolis polyphenolic species.     

Separation and determination of coumarins from Cacalia tangutica by capillary zone electrophoresis

Capillary zone electrophoresis (CZE), using a 20 mmol/L borate buffer at pH 10.5, was developed for the identification and determination of three coumarins--7-hydroxy-coumarin (HC), 7-hydroxy-8-methoxy-coumarin (HMC) and 7-O-beta-D-glucosyl-coumarin (GC)--in the extracts of the flower of Cacalia tangutica. Regression equations revealed linear relationships (correlation coefficient 0.9986-0.9990) between the corrected peak area (the ratio of peak area to migration time) of each constituent and its concentration. The relative standard deviations (RSD) of the migration time and peak area were 1.45-1.52 and 2.60-3.84% (intra-day), and 1.75-2.22 and 2.90-4.04% (inter-day), respectively. The recoveries of three constituents ranged between 94.5 and 105.6%. The effects of pH value, buffer concentration and applied voltage on the migration behavior of HC, HMC and GC were investigated. The contents of the three active constituents in the flower of Cacalia tangutica were successfully determined within 6 min under the optimum conditions chosen. Moreover, the dissociation constants for three coumarins were also determined by CE.     

Chiral capillary electrophoresis as predictor for separation of drug enantiomers in continuous flow zone electrophoresis

Separation of the enantiomers of chlorpheniramine and methadone in acidic buffers containing carboxymethyl-betacyclodextrin (CMCD) as chiral selector was investigated by capillary zone electrophoresis. For a range of pH and CMCD concentrations, the mobility difference and resolution of the enantiomers were determined. Then, conditions known to provide well resolved enantiomers and optimized chiral separation were applied to chiral continuous flow electrophoresis. In that approach, a thin film of fluid flowing between two parallel plates is employed as carrier for electrophoresis. The electrolytes and the sample are continuously admitted at one end of the electrophoresis chamber and are fractionated by an array of outlet tubes at the other. The number of pure enantiomeric fractions obtained by chiral continuous flow electrophoresis was found to be directly dependent on the enantiomeric mobility difference. For racemic chlorpheniramine separated in a betaine-acetic acid buffer at a total throughput of 5 mg/h, complete enantiomeric separation is shown to require a mobility difference of about 3 x 10(-9) m2/V s. Furthermore, compared to the previous investigations with hydroxypropyl-beta-cyclodextrin, CMCD was found to permit improved fractionation of methadone enantiomers. With a total racemic drug throughput of about 15 mg/h, continuous flow zone electrophoresis processing with CMCD as chiral selector is shown to have the potential of providing pure enantiomers on a mg/h scale. The results indicate that chiral capillary zone electrophoresis data can be employed as predictor for preparative scale chiral separations based upon continuous flow zone electrophoresis.     

毛细管电泳分离几种神经递质的研究

研究了不同毛细管预处理方法对组胺、5-羟色胺及儿茶酚胺类神经递质电泳分离的影响，采用优化的毛细管预处理方法及电泳分离条件基线分离了组胺、5-羟色胺、去甲肾上腺素和肾上腺素。利用多巴胺和5-羟色胺在毛细管内壁吸附效应的不同，对电泳淌度极为相近的多巴胺和5-羟色胺进行了分离和鉴定。以PC22细胞为研究对象，证实了该细胞中所含大量神经递质是多巴胺，不是5-羟色胺。     

Separation of globins using free zone capillary electrophoresis.

This paper describes the use of high-performance capillary electrophoresis for the separation of globin chains. Adult and newborn haemolysates from normal individuals and children suspected of having thalassaemia were analysed using free zone electrophoresis. Separation of globins was accomplished using a 25 mM phosphate buffer at pH 11.8. Distinct peaks of alpha-, beta- and gamma-chains were resolved within 8 min. The coefficient of variation for within-day and between-day runs was 4.1% and 5.7%, respectively. This method is simple and rapid, and it can be used to screen for thalassaemia and for the clinical study of various haemoglobinopathies.     

Scale-up of free-flow electrophoresis: II. Purification of alcohol dehydrogenase from a crude yeast extract by field step electrophoresis and combined field step-zone electrophoresis

Results of the purification of alcohol dehydrogenase (ADH) by field step electrophoresis and combined field step-zone electrophoresis are presented. In field step electrophoresis, optimization of voltage, residence time and pH of the sample solution led to a maximal purification factor of 2.8 and a yield of 89% ADH. The limit of loading capacity was reached at a protein concentration of the sample solution of approximately 4 g/L, allowing a maximal throughput of 1.14 g/h with a yield of 86% and a 2.8-fold purification in the Elphor VaP 22 apparatus. With a production scale apparatus a throughput of 2.07 g/h without any loss of separation quality could be achieved. By introducing the sample solution into the separation chamber through 3 inlets, simultaneously, the throughput was increased to 3.2 g/h with a purification factor of 2.7 and a yield of 82% ADH. For the combined field step-zone electrophoresis method a maximum purification factor of 3.6 and a yield of 80% ADH were achieved. The loading capacity was limited to a 4.13 g/L protein concentration of the sample solution, resulting in a throughput of 440 mg/h. Injecting the sample solution simultaneously into 3 inlets resulted in a maximum throughput of 1.92 g/h with 3.1-fold purification and a yield of 80% ADH. Zone electrophoresis, field step electrophoresis and a combination of both are compared with respect to resolution, throughput and the application potential in a protein purification scheme. A scale-up to 3 g/h is possible in zone electrophoresis and field step electrophoresis.(ABSTRACT TRUNCATED AT 250 WORDS)     

Separation and purification of isoflavones from a crude soybean extract by high-speed counter-current chromatography

A set of isoflavones with a broad range of polarity including daidzin, glycitin, genistin, acetyldaidzin, glycitein, acetylgenistin and daidzein was separated from a crude soybean extract by high-speed counter-current chromatography using a two-step operation. Three solvent systems were used: chloroform-methanol-water (4:3:2, v/v); chloroform-methanol-n-butanol-water (4:3:0.5:2, v/v); and methyl tert.-butyl ether-tetrahydrofuran-0.5% aqueous trifluoroacetic acid (2:2:0.15:4, v/v). The first solvent system was used for separating less polar isoflavones and the second for more polar isoflavones by eluting the lower organic phase. Genistin and glycitin, which were only partially resolved in the chloroform system, were separated by the third solvent system. Each isolated component showed 98-99% purity as determined by high-performance liquid chromatography analysis. Their structures were identified by LC-MS.     

Separation of unmodified polystyrene nanosphere standards by capillary zone electrophoresis

Size separation of five unmodified polystyrene nanosphere standards with diameters between 50 and 600 nm has been achieved in phosphate buffer solutions as carrier electrolyte. The electrophoretic mobility increases with particle diameter. Optical spectra was shown to be different for particles of different size. Effects of injection time, applied voltage, pH, and phosphate concentration in carrier electrolyte on particle separation were studied. Under optimal conditions the peak efficiency ranged from 600 to 10,500 theoretical plate numbers depending on nanosphere diameter was achieved.     

Separation of structurally related synthetic peptides by capillary zone electrophoresis

The separation of two different sets of synthetic peptides has been investigated by high-performance capillary zone electrophoresis utilising naked, fused silica capillaries. The effects of electrolyte pH, buffer concentration, capillary length and electric field strength on the separation efficiency and selectivity were systematically varied, with the highest resolution achieved with buffer electrolytes of low pH and relatively high ionic strength. Under optimised separation conditions utilising the "short end injection" separation approach with negative electric field polarity, a series of eight structurally-related synthetic peptides were baseline resolved within 4 min without addition of any modifier of the background electrolyte with separation efficiencies in the vicinity of 600000 theoretical plates/m. Further significant enhancement of separation efficiencies could be achieved by taking advantage of the "long end injection" approach with positive electric field polarity. The outcome of these experimental variations parallels the "sweeping" effect that has been observed in the capillary electrochromatographic and micellar electrokinetic separations of polar molecules and permits rapid resolution of peptides with focusing effects. In addition, small changes in the electrolyte buffer pH and concentration were found to have a significant impact on the selectivity of synthetic peptides of similar intrinsic charge. These observations indicate that multi-modal separation mechanisms operated under these conditions with the unmodified fused silica capillaries. This study, moreover, documents additional examples of peptide-specific multi-zoning behaviour in the high-performance capillary zone electrophoretic separation of synthetic peptides.     

Separation accuracy of free flow electrophoresis as proved by flow cytometry

The separation accuracy of the free flow electrophoresis ACE 710 device was proved by immunological methods. Several cell populations of human peripheral blood were purified using physical cell isolation methods such as countercurrent centrifugal elutriation and cell electrophoresis. The purified cell fractions were treated with fluoresceinisothiocyanate-labelled antibodies. The percentages of cells in each fraction binding the antibodies of interest were determined by flow cytometry. The analyses revealed that with the help of free flow electrophoresis, given cell populations of human peripheral blood can be highly enriched and that preenrichment of minor cell populations enhances the efficacy of a flow cytometer.     

Separation of enantiomers of butorphanol and cycloamine by capillary zone electrophoresis

Butorphanol tartrate is a synthetic opioid agonist-antagonist used as analgesic, possessing three chiral centres in the basic part of the molecule. Its chiral purity is routinely controlled only by optical rotation. A new capillary zone electrophoresis method, capable to separate the enantiomers of butorphanol and intermediate of its synthesis, cycloamine, was developed. Different electrolyte composition (type and concentration of carrier ion, pH, and organic solvent addition), and type and concentration of several chiral selectors (natural and modified cyclodextrins) were tested. Using the optimized conditions (acidic electrolyte with the addition of highly sulphated gamma-cyclodextrin) as low as 0.05% of undesirable enantiomers can be detected. Selected method characteristics, i.e., linearity (0-50 mg/l), precision (2.5% at 20 mg/l), and accuracy (101 +/- 2% at 20 mg/l) were evaluated. The optimized method was applied for the analysis of real batches of butorphanol and cycloamine. It was found that butorphanol tartrate manufactured by IVAX Pharmaceuticals contains less than 0.05% of undesirable enantiomer.