Valence band studies of the formation of ultrathin pure silicon nitride films on Si(1 0 0)

The growth of ultrathin films of Si₃N₄ directly on Si surfaces is studied with valence band photoemission. The information from these studies about the growth mechanism and the changes of the electronic structure is enhanced by the use of various photon energies with synchrotron radiation. The silicon nitride films are grown isothermally on the Si(1 0 0) and Si(1 1 1) surfaces by reactions with atomic N. The atomic nitrogen is produced by using a remote, microwave excited nitrogen plasma. The growth under these conditions was earlier shown to be self limiting. The details in the valence band spectra are identified and resolved with numerical methods, and followed systematically during the growth. Thus the identification of Si surface states, Si-nitride interface states and bulk nitride states becomes possible. The previously obtained separation between amorphous and crystalline growth occurring around 500 °C is further supported in the present studies.     

Theoretical study of hydrogen adsorption on the GaN(0 0 0 1) surface

Ab initio density functional theory, using the B3LYP hybrid functional with all-electron basis sets, has been applied to the adsorption of H on the (0 0 0 1) surface of wurtzite GaN. For bulk GaN, good agreement is obtained with photoemission and X-ray emission data for the valence band and for the Ga 3d and N 2s shallow core levels. A band gap of E_g = 4.14 eV is computed vs the experimental value (at 0 K) of 3.50 eV. A simple model, consisting of a (2 × 2) structure with 3/4-monolayer (ML) of adsorbed H, is found to yield a density of states in poor agreement with photoemission data for H adsorbed on surfaces prepared by ion bombardment and annealing. A new model, consisting of co-adsorbed Ga (1/4 ML) and H (1/2 ML), is proposed to account for these data.     

Theoretical study of the electronic structure of the Si3N4(0 0 0 1) surface

Density functional theory has been applied to a study of the electronic structure of the ideally-terminated, relaxed and H-saturated (0 0 0 1) surfaces of β-Si₃N₄ and to that of the bulk material. For the bulk, the lattice constants and atom positions and the valence band density of states are all in good agreement with experimental results. A band gap of 6.7 eV is found which is in fair accord with the experimental value of 5.1-5.3 eV for H-free Si₃N₄. Using a two-dimensionally-periodic slab model, a π-bonding interaction is found between threefold-coordinated Si and twofold-coordinated N atoms in the surface plane leading to π and π* surface-state bands in the gap. A surface-state band derived from s-orbitals is also found in the gap between the upper and lower parts of the valence band. Relaxation results in displacements of surface and first-underlayer atoms and to a stronger π-bonding interaction which increases the π-π* gap. The relaxed surface shows no occupied surface states above the valence band maximum, in agreement with recent photoemission data for a thin Si₃N₄ film. The π* band, however, remains well below the conduction band minimum (but well above the Fermi level). Adsorbing H at all dangling-bond sites on the ideally-terminated surface and then relaxing the surface and first underlayer leads to smaller, but still finite, displacements in comparison to the clean relaxed surface. This surface is more stable, by about 3.67 eV per H, than the clean relaxed surface.     

Synthesis and electrical conductivity of various melilite-type electrolytes Ln1 + xSr1 − xGa3O7 + x/2

Melilite type ceramics ABC₃O₇ such as La_1.54Sr_0.46Ga₃O_7.27 are a new class of oxide conductors where the conductivity is carried out through interstitial oxygen ions. This work presents the attempt to replace the A-site element La with the other lanthanide elements and Y, resulting in various Ln_1 + xSr_1 − xGa₃O_7 + x/2 ceramics, in which Ln = La, Pr, Nd, Sm, Eu, Gd, Dy, Yb, Y, and 0.1 < x < 0.54. X-ray diffraction analysis shows that the melilite structure could be formed when the replacement is conducted with most lanthanides but not Yb and Y. Impedance spectroscopy demonstrates that the conductivity decreases dramatically with the decreasing of Ln³⁺ size and the charge-carrier concentration. These results suggest that, as an interstitial oxide ion electrolyte, La_1.54Sr_0.46Ga₃O_7.27 is the most promising ceramic in the Ln_1 + xSr_1 − xGa₃O_7+x/2 melilite family since La³⁺ has the largest ionic radius of the lanthanide elements.     

Structure and electronic properties of gold adsorbed on Ti(0 0 0 1)

The Au/Ti(0 0 0 1) adsorption system was studied by low energy electron diffraction (LEED) and photoemission spectroscopy with synchrotron radiation after step-wise Au evaporation onto the Ti(0 0 0 1) surface. For adsorption of Au at 300 K, no additional superstructures were observed and the (1 × 1) pattern of the clean surface simply became diffuse. Annealing of gold layers more than 1 ML thick resulted in the formation of an ordered Au-Ti surface alloy. Depending on the temperature and annealing time, three surface reconstructions were observed by LEED: (√3 × √3) R30°, (2 × 2) and a one-dimensional incommensurate (√3 × √3) rectangular pattern. The Au 4f core level and valence band photoemission spectra provided evidence of a strong chemical interaction between gold and titanium. The data indicated formation of an intermetallic interface and associated valence orbital hybridization, together with diffusion of gold into the bulk. Au core-level shifts were found to be dependent on the surface alloy stoichiometry.     

A valence band photoemission study of Pb adsorption on Rh(1 0 0) and Rh(1 1 0)

We have studied the adsorption of Pb on the Rh(1 0 0) and (1 1 0) surfaces by photoemission and low energy electron diffraction (LEED), and tested the chemical properties by adsorption of CO. Pb forms two distinct c(2 × 2) phases on Rh(1 0 0), according to the temperature of the substrate. The phase formed below about 570-620 K, denoted α-c(2 × 2), reduces the coverage of adsorbed CO but does not affect the valence band spectrum of the molecule. The phase formed above this temperature, denoted β-c(2 × 2), also reduces the coverage of adsorbed CO but the valence band spectrum of the adsorbed CO is strongly affected. The two phases are also characterised by a slightly different binding energy of the Pb 5d_5/2 level, 17.54 eV for the α phase and 17.70 for the β phase. The Pb/Rh(1 1 0) surface shows two ordered Pb induced phases, c(2 × 2) and p(3 × 1). CO adsorbs on the first with reduced heat of adsorption and with a valence band spectrum that is strongly altered with respect to CO adsorbed on clean Rh(1 1 0), but does not adsorb on the p(3 × 1) structure at 300 K. We compare the present results with previous results from related systems.     

Valence band and band gap photoemission study of (1 1 1) In2O3 epitaxial films under interactions with oxygen, water and carbon monoxide

Synchrotron radiation ultraviolet photoemission experiments at photon energies of 150 and 49 eV were performed on an epitaxial layer of (1 1 1) In₂O₃ with good crystallinity as established by a standard scanning probe and diffraction methods. Valence band (VB) and band gap photoemission spectra were monitored under separate oxygen, water and carbon monoxide exposures (100 L) at different activation temperatures within the range utilized for chemiresistive gas sensors (160-450 °C). Large changes in photoemission response within the whole VB were observed for all gases. Regular shifts of the valence band edge relative to the Fermi energy were found under gas exposures on two kinds of surface (partially reduced or partially oxidized), and are interpreted as changes of surface potential. Treatments in oxygen resulted in upward band bending (∼0.5 eV at T = 320 °C). Regardless of activation temperature, treatments in water resulted in downward band bending, but with small changes (<0.1 eV). Reduction properties of carbon monoxide were observed only at high temperatures of T ? 370 °C. At temperatures of 160 and 250 °C unusual “oxidizing” behavior of CO was observed with upward band bending of ∼0.7 eV (160 °C). Oxidizing and reducing effects of the gas interactions with the (1 1 1) In₂O₃ surface in all cases were accompanied by a corresponding behavior, i.e., a decrease or increase in photoemission response from so-called defect states in the band gap near the top of the valence band. The increases of photoemission within a band gap with maxima at binding energies (BE) of 0.4 (O₂-induced peak) and 1.0 eV (CO-induced peak) were, respectively, found for interactions with O₂ and CO for low temperatures (T = 160 and 250 °C). These responses were ascribed to acceptor-like electronic levels of O₂ and CO chemisorption states, respectively. A definite split of the top VB peak (BE ∼ 4.0 eV) was found under CO dosing at 160 °C. Established knowledge of the CO interaction with the (1 1 1) In₂O₃ surface explains earlier revealed acceptor-like behavior of In₂O₃ film conductivity during CO detection at operational temperatures lower than 250 °C through the formation of acceptor-like electronic levels of adsorbed CO molecules.     

Electromagnetic and microwave absorption properties of Fe–Sr0.8La0.2Fe11.8Co0.2O19 shell-core composites

Shell-core Fe–Sr_0.8La_0.2Fe_11.8Co_0.2O₁₉ composites are prepared by chemical vapor deposition (CVD) for use as microwave absorbing materials. Scanning electron microscopy and X-ray diffraction analyses show that the CVD method yields Sr_0.8La_0.2Fe_11.8Co_0.2O₁₉ powders with a uniform coating of Fe. Compared with Sr_0.8La_0.2Fe_11.8Co_0.2O₁₉, Fe–Sr_0.8La_0.2Fe_11.8Co_0.2O₁₉ composites have higher electrical conductivity, permittivity, and dielectric loss, which gradually increase with increasing Fe content. When Sr_0.8La_0.2Fe_11.8Co_0.2O₁₉/Fe=7:3, a reflection loss (RL) exceeding −10 dB is obtained in the frequency range of 10–14 GHz at a coating thickness of 2.0 mm. A minimum RL of −30 dB was found at 8.0 GHz, corresponding to a matching thickness of 2.8 mm.     

Growth mode and novel structure of ultra-thin KCl layers on the Si(1 0 0)-2 × 1 surface

This study investigates ultra-thin potassium chloride (KCl) films on the Si(1 0 0)-2 × 1 surfaces at near room temperature. The atomic structure and growth mode of this ionic solid film on the covalent bonded semiconductor surface is examined by synchrotron radiation core level photoemission, scanning tunneling microscopy and ab initio calculations. The Si 2p, K 3p and Cl 2p core level spectra together indicate that adsorbed KCl molecules at submonolayer coverage partially dissociate and that KCl overlayers above one monolayer (ML) have similar features in the valance band density of states as those of the bulk KCl crystal. STM results reveal a novel c(4 × 4) structure at 1 ML coverage. Ab initio calculations show that a model that comprises a periodic pyramidal geometry is consistent with experimental results.     

Band alignments at SrZrO3/Ge(0 0 1) interface: Thermal annealing effects

High-κ dielectrics SrZrO₃ were prepared on Ge(0 0 1) substrate using pulse laser deposition, and band alignments and thermal annealing effects were studied with high resolution X-ray photoemission spectroscopy. Valence and conduction band offsets at this interface were measured to be 3.26 eV and 1.77 eV, respectively. Interfacial Ge oxide layers were found at the interface. After annealing at 600 °C, the interfacial Ge oxide layers were eliminated, and the valence band offset increased to 3.50 eV, but the amorphous SrZrO₃ became polycrystalline in the meantime.     

Adsorption of 2-butyne on Si(0 0 1) at room temperature: A valence band photoemission study

We present an angle resolved ultraviolet photoemission spectroscopy study of the adsorption of 2-butyne (CH₃-CC-CH₃) on Si(0 0 1)-2 × 1 at room temperature. We recorded valence band photoemission spectra for two azimuthal positions of a vicinal silicon surface, where all the rows formed by the surface silicon dimers are parallel. The photoemission symmetry selection rules allow the determination of the orientation of the molecular orbitals. The photoemission signal of the HOMO is enhanced when the electric field is parallel to the dimer rows. This showed that the π orbital left intact after the cyclo-addition reaction of the molecule with one silicon dimer is parallel to the dimer rows. This indicates that each 2-butyne molecule adsorbs on one silicon dimer. In spite of the size of the system and the vicinity of the orbitals, the angle resolved study points out that no dispersion of the electronic bands occurs. Not all the surface dimers are reacted so some disorder still exists on the surface preventing the formation of Bloch states.     

Anisotropy of electron structure at InAs(1 1 1) surfaces by laser pump-and-probe photoemission spectroscopy

The electronic structure and the electron dynamics of the clean InAs(1 1 1)A 2 × 2 and the InAs(1 1 1)B 1 × 1 surfaces have been studied by laser pump-and-probe photoemission spectroscopy. Normally unpopulated electron states above the valence band maximum (VBM) are filled on the InAs(1 1 1)A surface due to the conduction band pinning above the Fermi level (E_F). Accompanied by the downward band banding alignment, a charge accumulation layer is confined to the surface region creating a two dimensional electron gas (2DEG). The decay of the photoexcited carriers above the conduction band minimum (CBM) is originated by bulk states affected by the presence of the surface. No occupied states were found on the InAs(1 1 1)B 1 × 1 surface. This fact is suggested to be due to the surface stabilisation by the charge removal from the surface into the bulk. The weak photoemission intensity above the VBM on the (1 1 1)B surface is attributed to electron states trapped by surface defects. The fast decay of the photoexcited electron states on the (1 1 1)A and the (1 1 1)B surfaces was found to be τ_1 1 1 A ? 5 ps and τ_1 1 1 B ?  4 ps, respectively. We suggest the diffusion of the hot electrons into the bulk is the decay mechanism.     

Electrical transport and magnetic properties of perovskite-type electron-doped La–Pr–Mn–O epitaxial films

La_1−xPr_xMnO₃ (LPrMO) thin films have been epitaxially grown on (1 0 0)SrTiO₃ single-crystal substrates by pulsed-laser deposition. The films have a perovskite structure and give rise to the colossal magnetoresistance effect with the maximum magnetoresistance ratio of 10³% (at 240 K and 5 T). The electrical transport and magnetic properties have been investigated for the La_0.8Pr_0.2MnO₃ film with thickness 3000 Å. The results indicate that the films have quite a distinctive magnetotransport behavior compared to the bulk. The analysis of X-ray photoemission spectroscopy suggests that the valence state of Pr is 4+ in LPrMO film. Therefore, the epitaxial film is most likely an electron-doped colossal magnetoresistance system.     

Surface electronic structure of α-Mo2C(0 0 0 1)

The electronic structure of α-Mo₂C(0 0 0 1) has been investigated by angle-resolved photoemission spectroscopy utilizing synchrotron radiation. A sharp peak is observed at 3.3 eV in normal-emission spectra. Since the peak shows no dispersion as a function of photon energy and is sensitively attenuated by oxygen adsorption, the initial state of the peak is attributed to a surface state. Resonant photoemission study shows that the state includes substantial contribution of 4d orbitals of the Mo atoms in the second layer. The emissions with constant kinetic energies of 22 and 31 eV above the Fermi level (E_F) are found in normal-emission spectra, and these emissions are interpreted as originating from the Mo N₁N₂₃V and N₂₃VV Auger transitions, respectively.     

Manganese silicide single crystal and films deposited on Si(1 1 1): A comparative spectroscopic study

A comparative experimental study is presented of the electronic properties of MnSi films grown on Si(1 1 1) and of MnSi single crystals, using X-ray absorption spectroscopy (XAS), and core level and valence band photoemission spectroscopy (PES). No significant differences in the electronic structure of the two systems can be found.Absorption measurements on the Mn 2p threshold show a mixed valence ground state, where the multiplet structure is washed out by the hybridisation of the Mn 3d states with the Si sp states. These results are also confirmed by photoemission (PE) spectra from the valence band and the Mn 3s, 3p and 2p core levels.Strong attention has been paid to the effect of contamination. The occurrence of multiplet effects in the absorption spectra indicates unambiguously the localisation of the Mn 3d electrons in Mn-O bonds, which strongly influences the electronic properties of these systems.     

Role of final states in photoemission from Al(1 1 1)

Enhancement of surface state peaks in angle resolved ultraviolet photoelectron spectra (ARUPS) from the Al(1 1 1) surface is studied experimentally and theoretically within the one-step model of photoemission. The resonant enhancement of the surface state emission is explained by the crucial role of elastic scattering of the outgoing electron. Dipole transitions to evanescent states in the final bands of the crystal are shown to determine photoemission at the resonant photon energy. The band structure based explanation is confirmed by the measurements of electron reflectivity and of the fine structure of valence band spectra. The surface sensitivity of ARUPS is shown to depend strongly on the complex band structure of the crystal and to be finely tunable by the choice of photoemitted electron energy.     

Synthesis and performance of Y-doped La0.7Sr0.3CrO3−δ as a potential anode material for solid oxygen fuel cells

Y-doped La_0.7Sr_0.3CrO_3−δ is a promising anode catalyst for solid oxygen fuel cell (SOFC). The performances of chemical and physical are measured by SEM, XRD and FT-IR. The conductivities of catalyst are measured by DC four-probe method in 20% H₂S-N₂, 3% H₂-N₂ and air from 573 K to 1173 K, respectively. The results show that Y-doped La_0.7Sr_0.3CrO_3−δ powders have perfect perovskite phase structure with no extra peaks and exhibit good chemical compatibility with Ce_0.8Sm_0.2O_1.9 (as electrolyte) in air. Through XRD and FT-IR analysis no sulfur-containing species is detected after exposure to the 20% H₂S at 1173 K for 5 h. Meanwhile, Y-doped La_0.7Sr_0.3CrO_3−δ shows that the highest conductivity is 0.21 S/cm at 1173 K in H₂S. The open circuit voltages are 0.85 V at 1173 K in H₂S and 1.04 V at 823 K in H₂. The maximal power densities are 12.4 mW/cm² in H₂S and 1.59 W/cm² in H₂ for cells comprising Y-doped La_0.7Sr_0.3CrO_3−δ-Sm_0.2Ce_0.8O_1.9/Sm_0.2Ce_0.8O_1.9/Ag.     

Characterization of cubic phase MgZnO/Si(1 0 0) interfaces

The microstructural properties of the Mg_xZn_1−xO/Si(1 0 0) interface were investigated using transmission electron microscopy (TEM) and chemical states of the heterostructure were studied by high resolution X-ray photoelectron spectroscopy (XPS). By analyzing the valence band spectra of thin Mg_xZn_1−xO/Si(1 0 0) heterostructures, the valence band offset between such Mg_0.55Zn_0.45O and Si(1 0 0) was obtained to be 2.3 eV. Using the cubic ternary thin films as insulators, metal-insulator-semiconductor (MIS) capacitors have been fabricated. Leakage current density lower than 3 × 10⁻⁷ A/cm² is obtained under the electrical field of 600 kV/cm by current-voltage (I-V) measurement. Frenkel-Poole conduction mechanism is the main cause of current leakage under high electrical field.     

Valence and magnetic states of impurity iron ions in the La<Subscript>0.75</Subscript>Sr<Subscript>0.25</Subscript>Co<Subscript>0.98</Subscript>Fe<Subscript>0.02</Subscript>O<Subscript>3</Subscript> perovskite

The local magnetic and valence states of impurity iron ions in the rhombohedral La_0.75Sr_0.25Co_0.98 ⁵⁷Fe_0.02O₃ perovskite were studied using Mössbauer spectroscopy in the temperature range 87–293 K. The Mössbauer spectra are described by a single doublet at 215–293 K. The spectra contained a paramagnetic and a ferromagnetic component at 180–212 K and only a broad ferromagnetic sextet at T < 180 K. The results of the studies showed that, over the temperature range 87–295 K, the iron ions are in a single (tetrahedral) state with a valence of +3. In the temperature range 180–212 K, two magnetic states of Fe³⁺ ions were observed, one of which is in magnetically ordered microregions and the other, in paramagnetic microregions; these states are due to atomic heterogeneity. In the magnetically ordered microregions in the temperature range 87–212 K, the magnetic state of the iron ions is described well by a single state with an average spin S = 1.4 ± 0.2 and a magnetic moment μ(Fe) = 2.6 ± 0.4μ _B .     

X-ray photoelectron spectroscopy characterization of the layered intercalated compound K2xMn1 − xPS3

Polycrystalline powders of the layered MnPS₃ compound have been intercalated with K⁺ ions by ion-exchange to yield the K_2xMn_1 − xPS₃ intercalate. X-ray photoelectron spectroscopy has been applied to learn about the electronic structure of this compound. In particular, we have studied the XPS spectra of the Mn 2p and 3p, P and S 2p, K 2p and 3p core levels and of the valence band region. The binding energies for various core levels of the elements present in this compound and their observed chemical shifts are analyzed. The data give evidence for the lack of non-equivalent atoms of K, Mn, P and S. Shake-up satellites are present at the Mn 2p and 3p core levels. The occurrence of such lines allows us to hypothesize that K_2xMn_1 − xPS₃ is a large-gap insulating Mn compound. Confirmation that only an ion transfer accompanies the intercalation process is given from both the strong observed similarity with the corresponding XPS spectra in MnPS₃ and the observed binding energy positions of the K 2p and 3p levels. As regards the valence band XPS spectrum, the observed analogies with the corresponding XPS spectra of the pure compound and of other K compounds have allowed us to single out two regions and their probable contributors.