Chelating agents related to ethylenediamine bis(2-hydroxyphenyl)acetic acid (EDDHA): synthesis,characterization, and equilibrium studies of the free ligands and their Mg2+, Ca2+, Cu2+, and Fe3+ chelates

Iron chelates such as ethylenediamine-N,N'-bis(2-hydroxyphenyl)acetic acid (EDDHA) and their analogues are the most efficient soil fertilizers to treat iron chlorosis in plants growing in calcareous soils. EDDHA, EDDH4MA (ethylenediamine-N,N'-bis(2-hydroxy-4-methylphenyl)acetic acid), and EDDCHA (ethylenediamine-N,N'-bis(2-hydroxy-5-carboxyphenyl)acetic acid) are allowed by the European directive, but also EDDHSA (ethylenediamine-N,N'-bis(2-hydroxy-5-sulfonylphenyl)acetic acid) and EDDH5MA (ethylenediamine-N,N'-bis(2-hydroxy-5-methylphenyl)acetic acid) are present in several commercial iron chelates. In this study, these chelating agents as well as p,p-EDDHA (ethylenediamine-N,N'-bis(4-hydroxyphenyl)acetic acid) and EDDMtxA (ethylenediamine-N,N'-bis(2-metoxyphenyl)acetic acid) have been obtained following a new synthetic pathway. Their chemical behavior has been studied to predict the effect of the substituents in the benzene ring on their efficacy as iron fertilizers for soils above pH 7. The purity of the chelating agents has been determined using a novel methodology through spectrophotometric titration at 480 nm with Fe(3+) as titrant to evaluate the inorganic impurities. The protonation constants were determined by both spectrophotometric and potentiometric methods, and Ca(2+) and Mg(2+) stability constants were determined from potentiometric titrations. To establish the Fe(3+) and Cu(2+) stability constants, a new spectrophotometric method has been developed, and the results were compared with those reported in the literature for EDDHA and EDDHMA and their meso- and rac-isomers. pM values have been also determined to provide a comparable basis to establish the relative chelating ability of these ligands. The purity obtained for the ligands is higher than 87% in all cases and is comparable with that obtained by (1)H NMR. No significant differences have been found among ligands when their protonation and stability constants were compared. As expected, no Fe(3+) complexation was observed for p,p-EDDHA and EDDMtxA. The presence of sulfonium groups in EDDHSA produces an increase in acidity that affects their protonation and stability constants, although the pFe values suggest that EDDHSA could be also effective to correct iron chlorosis in plants.     

Chemometric study of selected polychlorinated biphenyls in ambient air of Madrid (Spain)

The formation of Fe(III) and Fe(II) chelates with pyridylazo and thiazolylazo reagents was examined. Optimum conditions for the formation of Fe(III) and Fe(II) chelates with 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol (5-Br-PADAP) were in detail evaluated. The LC method for simultaneous separation of Fe(III) and Fe(II) ions as 5-Br-PADAP chelates was evaluated using the PEEK column with C18 e.c. stationary phase and acetonitrile+water (90:10, v/v) eluent containing the 1x10(-3) mol l(-1) C(12)H(25)SO(3)Na, the ion-pairing reagent, pH 3.4-3.6. The simultaneous determination of 20-500 mug l(-1) Fe(II) ions (detection at 555 nm) and 20-500 mug l(-1) Fe(III) ions (detection at 585 nm) as 5-Br-PADAP chelates (for both ions, detection limit, 18 mug l(-1) for 20 mul loop) was established. The chromatographic method was applied to the water analysis. Although the present method is able to determine both Fe(III) and Fe(II) ions, the Fe(III) ion was not detected in all water samples. The Fe(II) was detected only in fresh gathered oligocene water at the level of 135 mug l(-1). The present method was used to the investigation of the distribution of Fe(III)/Fe(II) ions in aqueous and micellar solutions after action of external, ultrasonic field.     

柱前螯合反应-高效液相色谱法测定超痕量Fe(Ⅱ),Co(Ⅱ),Fe(Ⅲ)

以吡啶偶氮类螯合剂为配体同时测定多种金属离子的高效液相色谱法研究虽有报道^[1～3],但还未见应用4-(5-氯-2-吡啶偶氮)-1,3-二胺基苯(5-Cl-PADAB)为配体与重金属螯合并进行高效液相色谱分离的文献。本文试图用反相分离方式研究Fe(Ⅱ)、Co(Ⅱ)、Fe(Ⅲ)与5-Cl-PADAB螯合物的色谱保留行为并拟建立分离检测方法。研究结果表明,此方法能同时测定Fe(Ⅱ)、Co(Ⅱ)、Fe(Ⅲ),3种离子的检出限分别为4×10^-11、4×10^-11和2×10^-11g。该方法可用于矿样和天然水样分析,尤适于Fe(Ⅱ)、Fe(Ⅲ)的价态分析。     

Reversed-phase HPLC determination of Co(II), Ni(II) and Fe(III) as their 2-(2-thiazolylazo)-5-dimethylaminophenol chelates

The optimum chromatographic separation conditions for Co(II), Ni(II), and Fe(III) chelates with 2-(2-thiazolylazo)-5-dimethylaminophenol (TAM) were investigated. The compositions of chelates were also determined by the HPLC method and thus the possible structure of chelates was given. A precolumn derivatization method was used, followed by separation on an octyl-bonded silica stationary phase with a methanol-tetrahydrofuran-water (40:9:51, v/v/v) mobile phase containing pH 5.8 acetate buffer and 1 x 10(-4)M TAM. The detection limits of Co(II), Ni(II), and Fe(III) at 560 nm are 0.03, 0.02 and 0.1 ng (S N = 2 ), respectively. They can be determined by means of the proposed method without interference from other common metal ions and have been determined in five standard alloys with satisfactory results.     

Chromatographic methods for the separation of biocompatible iron chelators from their synthetic precursors and iron chelates

Chromatographic methods have been developed for the separation of the three novel biocompatible iron chelators pyridoxal isonicotinoyl hydrazone (PIH), salicylaldehyde isonicotinoyl hydrazone (SIH), and pyridoxal 2-chlorobenzoyl hydrazone (o-108) from their synthetic precursors and iron chelates. The chromatographic analyses were achieved using analytical columns packed with 5 microm Nucleosil 120-5 C18. For the evaluation of all chelators in the presence of the synthetic precursors, EDTA was added to the mobile phase at a concentration of 2 mM. The best separation of PIH and its synthetic precursors was achieved using a mixture of phosphate buffer (0.01 M NaH2PO4, 5 mM 1-heptanesulfonic acid sodium salt; pH 3.0) and methanol (55:45, v/v). For separation of SIH and its synthetic precursors, the mobile phase was composed of 0.01 M phosphate buffer (pH 6.0) and methanol (60:40, v/v). o-108 was analyzed employing a mixture of 0.01 M phosphate buffer (pH 7.0), methanol, and acetonitrile (60:20:20, v/v/v). These mobile phases were slightly modified to separate each chelator from its iron chelate. Furthermore, a RP-TLC method has also been developed for fast separation of all compounds. The chromatographic methods described herein could be applied in the evaluation of purity and stability of these drug candidates.     

Study on Determination of Six Transition Metal Ions in Biological Samples by SPE and RP‐HPLC

This paper reports the utilization of solid phase extraction and the reversed‐phase high‐performance liquid chromatography (RP‐HPLC) for the determination of six transition metal ions (iron, cobalt, nickel, copper, zinc and manganese) in biological samples. The samples were digested by microwave digestion. The iron, cobalt, nickel, copper, zinc and manganese ions in the digested samples can react with 2‐(2‐quinolinylazo)‐5‐diethylaminophenol (QADEAP) to form colored chelates in pH 4.0 acetic acid‐sodium acetic buffer solutions and cetyl trimethylammonium bromide (CTMAB) medium. These chelates were enriched by solid phase extraction with C₁₈ cartridge. Then the chelates were separated on a Waters Nova‐Pak‐C₁₈ column (3.9 × 150 mm, 5 μm) by gradient elution with methanol (containing 0.5% of acetic acid and 0.1% of CTMAB) and 0.05 mol/L pH 4.0 acetic acid‐sodium acetic buffer solution (containing 0.1% of CTMAB) as mobile phase at a flow rate of 0.5 mL/min. The detection limits of iron, cobalt, nickel, copper, zinc and manganese are 3 ng/L, 4 ng/L, 2 ng/L, 4 ng/L, 8 ng/L, 10 ng/L, respectively. This method was applied to the determination of iron, cobalt, nickel, copper, zinc and manganese in biological samples with good results.     

Simultaneous determination of palladium, platinum, rhodium and gold by on-line solid phase extraction and high performance liquid chromatography with 5-(2-hydroxy-5-nitrophenylazo)thiorhodanine as pre-column derivatization regents

In this paper, 5-(2-hydroxy-5-nitrophenylazo)thiorhodanine (HNATR) was synthesized. A new method for the simultaneous determination of palladium, platinum, rhodium and gold ions as metal-HNATR chelates was developed using a rapid analysis column high performance liquid chromatography equipped with on-line solid phase extraction technique. The samples (Water, human urine, geological samples and soil) were digested by microwave acid-digestion. The palladium, platinum, rhodium and gold ions in the digested samples were pre-column derivatized with HNATR to form colored chelates. The Pd-HNATR, Pt-HNATR, Rh-HNATR and Au-HNATR chelates can be absorbed onto the front of the enrichment column when they were injected into the injector and sent to the enrichment column [Zorbax Stable Bound, 10 mm x 4.6 mm, 1.8 microm] with a buffer solution of 0.05 mol L(-1) phosphoric acid as mobile phase. After the enrichment had finished, by switching the six ports switching valve, the retained chelates were back-flushed by mobile phase and travelling towards the analytical column. These chelates separation on the analytical column [Zorbax Stable Bound, 10 mm x 4.6 mm, 1.8 microm] was satisfactory with 72% acetonitrile (containing 0.05 mol L(-1) of phosphoric acid and 0.1% of Triton X-100) as mobile phase. The palladium, platinum, rhodium and gold chelates were separated completely within 2.5 min. Compared to the routine chromatographic method, more then 80% of separation time was shortened. By on-line solid phase extraction system, a large volume of sample (10 mL) can be injected, and the sensitivity of the method was greatly improved. The detection limits (S/N=3, the sample injection volume is 10 mL) of palladium, platinum, rhodium and gold in the original samples reaches 1.4, 1.8, 2.0 and 1.2 ng L(-1), respectively. The relative standard deviations for five replicate samples were 2.4-3.6%. The standard recoveries were 88-95%. This method was applied to the determination of palladium, platinum, rhodium and gold in human urine, water and geological samples with good results.     

Determination of transition metal ions in tobacco as their 2-(2-quinolinylazo)-5-dimethylaminophenol derivatives using reversed-phase liquid chromatography with UV-VIS detection

This paper reports the utilization of solid-phase extraction and the reversed-phase high-performance liquid chromatography for the determination of six important transition metal ions: iron, cobalt, nickel, copper, zinc and manganese in tobacco with 2-(2-quinolinylazo)-5-dimethylaminophenol (QADMAP) as chelating reagent. Iron, cobalt, nickel, copper, zinc and manganese ions react with QADMAP to form colored chelates in the medium of acetic acid-sodium acetate buffer solution (pH 4.0). These chelates can be enriched by solid-phase extraction with Waters Sep-Pak-C18 cartridge, and eluted the retained chelates from cartridge with tetrahydrofuran. The chelates were separated on a Waters Nova-Pak-C18 column (150x3.9 mm, 5 microm) by gradient elution with methanol (containing 0.5% of acetic acid) and 0.05 mol/l pH 4.0 acetic acid-sodium acetate buffer solution as mobile phase at a flow-rate of 0.5 ml/min. The detection limits of iron, cobalt, nickel, copper, zinc and manganese are 10, 12, 8, 13, 17 and 22 ng/l, respectively. This method had been applied to the determination of iron, cobalt, nickel, copper, zinc and manganese in tobacco with good results.     

Liquid chromatographic determination of cobalt(II), copper(II) and iron(II) using 2-thiophenaldehyde-4-phenyl-3-thiosemicarbazone as derivatizing reagent

The complexing reagent 2-thiophenaldehyde-4-phenyl-3-thiosemicarbazone (TAPT) was examined for high performance liquid chromatographic (HPLC) separations of cobalt(II), copper(II) and iron(II) or cobalt(II), nickel(II), iron(II), copper(II) and mercury(II) as metal chelates on a Microsorb C-18, 5-mum column (150x4.6 mm i.d.) (Rainin Instruments Woburn, MA, USA). The complexes were eluted isocratically with methanol:acetonitrile:water containing sodium acetate and tetrabutyl ammonium bromide (TBA). UV detection was at 254 nm. The solvent extraction procedure was developed for simultaneous determination of the metals, with detection limits within 0.5-2.5 mug ml(-1) in the final solution. The method was applied for the determination of copper, cobalt and iron in pharmaceutical preparation.     

Liquid chromatographic determination of chelates of cobalt (II), copper (II) and iron (II) with 2-thiophonaldehyde-4-phenyl-3-thiosemicarbazone

Summary A new chelating reagent 2-thiophenaldehyde-4-phenyl-3-thiosemicarbazone (TAPT) has been examined for high performance liquid chromatographic (HPLC) separations of cobalt (II), copper(II) and iron (II) or cobalt (II), nickel (II), iron (II), copper (II) and mercury (II) as metal chelates on a C₁₈, 5μm column (250×4 mm i.d.) The chelates were eluted isocratically with methanol: acetonitrile: water containing sodium acetate and tetrabutylammonium bromide (TBA), and detected at 254 nm. A solvent extraction procedure was developed for simultaneous determination of the metals with detection limits within 0.02–2.5 μ g.mL⁻¹. The method was applied to the determination of copper, cobalt and iron in natural waters.     

Determination of Fe(III), Al(III), Mo(VI) and W(VI) with tetracycline by reversed-phase high-performance liquid chromatography

Tetracycline (TC) was used as a precolumn chelating reagent for reversed-phase high-performance liquid chromatographic (HPLC) separation and determination of Fe(III), Al(III), Mo(VI) and W(VI). The metal-TC chelates were separated on a Nucleosil C(18) (5 mum) column using a mobile phase of acetonitrile-water (21:79, v/v) containing citrate buffer and sodium chloride, nanogram levels of the metals could be determined by HPLC with satisfactory precision. The proposed method was applied to the simultaneous determination of Mo(VI) and W(VI) in mineral samples.     

Determination of synthetic ferric chelates used as fertilizers by liquid chromatography-electrospray/mass spectrometry in agricultural matrices

A high-performance liquid chromatography-electrospray ionization/mass spectrometry (time of flight) method has been developed for the simultaneous determination of synthetic Fe(III)-chelates used as fertilizers. Analytes included the seven major Fe(III)-chelates used in agriculture, Fe(III)-EDTA, Fe(III)-DTPA, Fe(III)-HEDTA, Fe(III)-CDTA, Fe(III)-o,oEDDHA, Fe(III)-o,pEDDHA, and Fe(III)-EDDHMA, and the method was validated using isotope labeled (57)Fe(III)-chelates as internal standards. Calibration curves had R values in the range 0.9962-0.9997. Limits of detection and quantification were in the ranges 3-164 and 14-945 pmol, respectively. Analyte concentrations could be determined between the limits of quantification and 25 muM (racemic and meso Fe(III)-o,oEDDHA and Fe(III)-EDDHMA) or 50 muM (Fe(III)-EDTA, Fe(III)-HEDTA, Fe(III)-DTPA, Fe(III)-CDTA and Fe(III)-o,pEDDHA). The average intraday repeatability values were approximately 0.5 and 5% for retention time and peak area, respectively, whereas the interday repeatability values were approximately 0.7 and 8% for retention time and peak area, respectively. The method was validated using four different agricultural matrices, including nutrient solution, irrigation water, soil solution, and plant xylem exudates, spiked with Fe(III)-chelate standards and their stable isotope-labeled corresponding chelates. Analyte recoveries found were in the ranges 92-101% (nutrient solution), 89-102% (irrigation water), 82-100% (soil solution), and 70-111% (plant xylem exudates). Recoveries depended on the analyte, with Fe(III)-EDTA and Fe(III)-DTPA showing the lowest recoveries (average values of 87 and 88%, respectively, for all agricultural matrices used), whereas for other analytes recoveries were between 91 and 101%. The method was also used to determine the real concentrations of Fe(III)-chelates in commercial fertilizers. Furthermore, the method is also capable of resolving two more synthetic Fe(III)-chelates, Fe(III)-EDDHSA and Fe(III)-EDDCHA, whose exact quantification is not currently possible because of lack of commercial standards.     

Determination of trace metals by capillary electrophoresis

A new analytical procedure is developed using a strong complexing agent, 1,10-phenanthroline (Phen), for direct UV detection of Zn, Mn, Cu, Co, Cd, and Fe at microg/L concentrations in environmental water samples. The metal chelates formed showed different electrophoretic mobilities and solved the comigration problem for capillary electrophoresis (CE) separation of free metal ions. To obtain stable metal-Phen chelates during the capillary zone electrophoresis (CZE) run, both pre-column and on-column complexation are required and threefold excess of Phen over metal ions should be added to the sample. The optimized background electrolyte (BGE) consists of 30 mM hydroxylamine hydrochloride and 0.1% methanol at pH 3.6. Under hydrodynamic sampling, CE run at + 20 kV in 65 cm x 0.05 mm ID fused-silica column with detection at 265 nm, baseline separation, satisfactory working ranges (10 microg/L to 5.5 mg/L), sensitive detection limits (1-3 microg/L), good repeatability for migration times (relative standard deviation, RSD 0.36-0.81%, n = 5), peak area (RSD 3.2-4.2%, n = 5) and peak height (RSD 3.2-4.5%, n = 5) were obtained for the metal cations investigated. The reliability of the method was established by parallel determination using the inductively coupled plasma-atomic emission spectrometry (ICP-AES) method giving results within statistical variation. The procedure developed is shown to provide a quick, sensitive, precise, and economic method for simultaneous determination of metal cations that can form stable chelates with Phen.     

反相离子对高效液相色谱法测定铁强化酱油中的乙二胺四乙酸铁钠

建立了用反相离子对高效液相色谱法分离和测定铁强化酱油中的铁营养强化剂乙二胺四乙酸铁钠(NaFeEDTA)的方法。样品经甲醇沉淀后,以Zorbax C8 色谱柱(150 mm×4.6 mm i.d.,5 μm)进行分离,以含12.5%甲醇、0.13%四丁基氢氧化铵(TBAOH)和0.052%甲酸的水溶液（pH 3.5）作为流动相,流速为1.00 mL/min,检测波长为254 nm,整个分离过程在30 min内完成。考察了NaFeEDTA在不同品牌酱油中的回收率,其中NaFeEDTA的添加量为0.50~4.00 g/L时,其回收率为94.15%~101.5%。对NaFeEDTA添加量为2.00 g/L的铁强化酱油样品重复测定6次,其峰面积的相对标准偏差为0.89%。NaFeEDTA标准溶液的最低检测限为0.03 mg/L。本方法简单、快速、重现性好,可用于铁强化酱油中NaFeEDTA含量的检测。     

Ion chromatography for determination of nitrite and nitrate in seawater using monolithic ODS columns

A fast and highly sensitive ion chromatographic method using monolithic ODS columns was developed for the determination of nitrite (NO2-) and nitrate (NO3-) in seawater. Two monolithic ODS columns (50 mm x 4.6 mm i.d. + 100 mm x 4.6 mm i.d.) connected in series were coated and equilibrated with 5 mM cetyltrimethylammonium chloride (CTAC) aqueous solution. The column efficiency with 0.5 M NaCl as the mobile phase did not decrease in spite of the increase in flow rate of the mobile phase. Thus, good chromatograms were obtained within 3 minutes for NO2- and NO3 in artificial seawater without interferences by coexisting ions. The detection limit (S/N = 3) with UV detection at 225 nm was 0.8 and 1.6 microg/L for NO2- and NO3-, respectively. The characteristics of the monolithic CTA(+)-coated ODS columns were discussed. The present method was successfully applied to the fast and sensitive determination of NO2- and NO3- in real seawater samples.     

Reversed-phase ion-pair partition liquid chromatography of chelates with 2-(3,5-dibromo-2-pyridylazo)-5-[N-ethyl-N-(3-sulphopropyl) amino] phenol and analogues

The ion-pair reversed-phase chromatography of some transition metal chelates with 2-(3,5-dibromo-2-pyridylazo)-5-[N-ethyl-N-(3-sulphopropyl)amino]phenol (3,5-diBr-PAESPAP) was studied. 3,5-DiBr-PAESPAP and its V(V), Cr(III), Fe(II), Co(III) and Ni(II) chelates were retained on and the copper (II), zinc(II) and cadmium(II) chelates dissociated in an ODS column using acetonitrile/water (37+63, v/v) (pH 7.0) containing 0.01 M acetate, 0.01 M 3-(N-morpholino)propanesulphonate buffer (pH 7.0) and 0.05 M Na⁺ as mobile phase. The chromatograms of 3,5-diBr-PAESPAP chelates were compared with those of the chelates with 2-(3,5-dibromo- 2-pyridylazo)-5-[N-(3-sulphopropyl)amino]phenol (3,5-diBr-PASPAP),2-(5-bromo-2- pyridylazo)-5-[N-(3-sulphopropyl)amino]phenol and 2-(5-bromo-2-pyridylazo)-5-[N-propyl-N- (3-sulphopropyl)amino] phenol. With 3,5-diBr-PAESPAP the Fe(II) and Ni(II) chelates were not resolved, but resolution was achieved with 3,5-diBr-PASPAP. The calibration graphs were linear over the ranges 2.0–10.0 ng (10-μl injection) of Fe, Ni and Co and for 20–100 ng (10-μl injection) for V with 3,5-diBr-PAESPAP and 3,5-diBr-PASPAP.     

The separation by thin-layer chromatography of trace metals as their tetraphenylporphyrin chelates.

The tetraphenylporphyrin chelates of iron, cobalt, manganese, nickel, zinc, copper, rhodium lead, cadmium and mercury were prepared and their chromatographic behaviour investigated using four different adsorbents and eleven different solvent systems. Mixtures of lead, cadmium and mercury chelates exhibited isographic behaviour in all conditions; mixtures of the other metal chelates were adequately resolved on silica (MN Polygram Sil SHR) by the solvent system light petroleum (b.p. 80-100 degrees)-toluene-acetic acid-water (66:33:85:15, v/v, upper phase). The intense colours of the chelates permit their visual detection at levels of about 10(-10) moles; using the integrated ion-current mass spectrometric procedure, as little as 10(-14) moles of metal could be detected and assessed.     

Extraction-liquid chromatography with electrochemical and spectrophotometric detection for the determination of copper and iron in biological and river water samples

Reversed-phase liquid chromatography using cupferron as a precolumn derivatizing agent was developed for the determination of Cu(II) and Fe(III) in biological materials and natural water samples. In the direct method, the metal cupferronates formed in acetonitrile-water (1 + 1) are injected onto an ODS column followed by separation with a mobile phase containing acetonitrile-acetate buffer (pH 3.5) (7 + 3) and other reagents. Amperometric detection with a glassy carbon electrode at ?0.40 V vs. Ag/AgCl can be used to determine both metals simultaneously. The electrochemical detection method has better sensitivity for the determination of Fe(III) than the usual spectrophotometric detection at 375 nm. If a large volume of aqueous sample is available, concentration of the two metal ions can be made by extraction with ethyl acetate prior to the chromatographic determination. In this case, liquid chromatographic separation and determination can be performed with the ODS column using a mobile phase consisting of acetonitrile-methanol-ethyl acetate-0.02 M acetate buffer (pH 3.5) (45 + 20 + 5 + 30).     

Development and validation of an HPLC stability-indicating method for identification and assay of elemental iron(II) in pharmaceutical drug products using reversed-phase HPLC

Ferrous sulfate tablets are a supplementary iron source for people who suffer from iron deficiency anemia. A simple, fast, and QC-friendly HPLC method was developed and validated to determine elemental iron in ferrous sulfate drug products. A TSK-GEL Super octadecylsilyl column (50 x 4.6 mm id, 2 microm particle size) with a mobile phase consisting of 0.06 M methanesulfonic acid in water-acetonitrile (40 + 60, v/v) and UV detection at 282 nm were used for this method. Separation of the elemental iron peak from the matrix was achieved within 5 min. This method was successfully validated according to International Conference on Harmonization guidelines, and shown to be stability-indicating for the shelf-life samples of ferrous sulfate tablets, as well as selective for the analyte of interest.     

Reaction of iron pentacarbonyl with ethyl dichloroacetoacetate and dichloroacetylacetone

Conclusions Ethyl dichloroacetoacetate and dichloroacetylacetone react with Fe(CO)₅ to form iron chelates Fe[ClC · (COR)COCH₃]₃ (R=OEt and Me). The structures of these chelates were elucidated by³⁵Cl NQR, mass, and IR spectroscopy.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 2, pp. 478–479, February, 1985.