Optimization of phase objects in 4f coherent imaging system for nonlinear refraction measurements

We numerically analyze the effects of radius and phase shift of phase objects on the diffraction image of the 4f coherent imaging system, a system used for measuring the third-order nonlinear refractive index. The selection of the aperture radius is discussed. We prove that when the phase object radius is 0.1 time of the aperture radius and the phase change of the phase object is 0.57π, one can get the highest sensitivity for nonlinear refraction measurement.     

Nonlinear refraction measurements in presence of nonlinear absorption using phase object in a 4f system

We report a technique to measure the value of the nonlinear refractive index of materials in presence of nonlinear absorption using a phase object at the entry of a 4f coherent imaging system. We show that it is possible to obtain a signal approximately due only to the induced nonlinear refraction in presence of two photon absorption. Experimental and simulated Z-scan transmittance profiles with and without phase object, as well as acquired and calculated images are presented here in order to validate our approach. We show also that the use of a reference material simplifies the measurement procedure avoiding computer fits.     

Investigation of the properties of a sharp-focusing schlieren system by means of Fourier analysis

The sharp-focusing schlieren system is analysed by means of a Fourier approach. The signal received in the imaging plane is governed by the phase distribution in a particular object plane normal to the optical axis, while the contributions from other planes in the object that are out-of-focus can be considered as noise. A numerical simulation performed for a specific test object shows that the best spatial resolution is obtained with a system of five channels and that further increase of the number of channels does not improve the signal quality.     

一种三维数字成像系统的多视点姿态估计方法

为校准多视场深度数据,提出基于条纹投影的三维数字成像系统的多视点姿态估计方法。该方法至少在两个视点分别向被测物体投射出一组正交条纹图,利用条纹投影和相位重建技术,将相位图映射为物体的三维空间坐标。进而,利用投影仪的投射过程是摄像机成像过程的逆过程,建立投影仪的投射平面和摄像机的成像平面的对应关系,将“极线几何约束”应用到基于条纹投影的主动三维视觉的姿态估计问题,并在考虑测量数据受噪声影响的条件下,建立了求解视点姿态参量的数学模型。通过优化求解非线性方程可以获得多视点的姿态估计参量。所设计的实验及结果证明了所提出方法的有效性。     

天文望远镜像差对斑点成像技术的影响

着重研究了采用斑点成像技术处理天文望远镜图像时,光学系统固定像差对图像恢复结果的影响。在详细研究各种恢复天文图像振幅和相位的理论和方法的基础上,建立了一个包括Labeyrie振幅恢复方法和KnoxThompson相位重构方法的恢复扩展目标的斑点成像处理模型,分析了光学系统固定像差对系统传递函数相位分布和目标相位重构的影响：天文目标通过大气成像,固定像差将会被淹没在大气湍流随机起伏中,像差对相位重构没有显著影响。处理图像结果表明,斑点成像技术能同时消除大气湍流和望远镜系统固定像差的影响,得到高分辨力的扩展目标图像。还提出了一种消除光学系统像差的方法。     

傅里叶位相的光学探测

根据光栅在傅里叶光学系统中的衍射特性,获得物体的傅里叶谱的实部和虚部信息,进而测出其傅里叶谱的实部和虚部信息,进而测出其傅里叶位相分布.本文给出了一维实物体的傅里叶位相的实验探测结果,并给予讨论.     

李变换方法在超环面光栅成像理论中的应用

应用李变换方法研究了超环面光栅的成像及其像差,介绍了李变换基本原理.光栅成像过程可分成五个部分,分别对应五个李变换;其中最重要的变换就是超环面光栅的衍射李变换.利用这五个李变换推导出了超环面光栅的成像公式,并应用光线追迹,对研究结果进行了验证,说明了李变换的方法能准确地描述超环面光栅的成像.该方法可以处理平面光源,能计算远离子午焦平面处的像差.李变换方法导出的成像公式描述了像平面坐标与物平面坐标、方向余弦之间的函数关系,体现了物空间变量与像空间对应变量之间映射关系.     

Digital reconstruction of grating-distorted images through virtual-optics imaging systems

We develop a technique to correct the distortion generated by the presence of a grating that prevents correct imaging of a test object in an optical system. We use the design concept of virtual-optics imaging systems to implement a setup and a corresponding filter to remove the distortion. Results are presented showing the potential of the method.     

利用相位差异技术校准非共光路静态像差

提出了一种用相位差异(PD)技术对自适应光学(AO)系统的非共光路静态像差进行校准的方法。相位差异技术通过采集焦面和离焦面的单帧或多帧短曝光图像来估算波前相位畸变,同时对目标图像进行恢复。在闭环工作条件下,自适应光学系统利用相位差异算法在线检测成像光路的静态像差,并将得到的像差系数转化为变形镜的初始化面形,从而补偿非共光路的静态像差。实验结果表明,校准后的成像质量显著提高,目标半峰全宽降低了约14%,系统残差降低了约72%。成像光路在线检测得到的系统残差与闭环回路实测残差的水平趋于一致,证实了相位差异技术应用于光学检测的能力。该方法具有在无需改变原有自适应光路以及高信噪比条件下便可精确解算系统像差的优点,是大口径光电成像系统较为理想的光学检测技术之一。     

Novel Ghost Imaging Method for a Pure Phase Object

We propose a novel ghost imaging scheme which is especially served to a pure phase object. A spatially incoherent beam is mixed with a coherent beam of the same frequency field by a beamsplitter. Then we perform the ghost imaging scheme using the mixed beam. Our theoretical result shows that this approach is capable of reconstructing a pure phase object in joint-intensity measurement. The visibility of the images is also analysed for two pure phase objects, an optical wedge and a phase grating.     

The study of the nonlinear absorption in the nonlinear-imaging technique with phase object

The nonlinear absorption can produce a nonlinear image very similar with the one created by the nonlinear refraction when using the nonlinear-imaging technique with phase object to measure the third-order nonlinearity of materials, but the principles of them are different. The formation of the nonlinear absorption image is explained, and the condition that the highest sensitivity of the nonlinear absorption measurement can be reached is deduced. For the materials with both nonlinear absorption and refraction, we find a proper phase shift of the phase object where the effect of the nonlinear refraction to the measured signal can be eliminated. The nonlinear absorption and refraction are numerically simulated when the phase shift of phase object to be π/2 that is normally used. The qualitative tendency of the signal variation is presented.     

非线性热晕效应自适应光学位相补偿

采用已建立的一套较完整的包括真实自适应光学位相补偿系统仿真的高能激光大气传输的数值模拟程序，对非线性热晕应相偿进行了计算。分析了非线性热晕效应位相补偿不稳定性的基本特征。     

Recent advances in terahertz imaging

We review recent progress in the field of terahertz “T-ray” imaging. This relatively new imaging technique, based on terahertz time-domain spectroscopy, has the potential to be the first portable far-infrared imaging spectrometer. We give several examples which illustrate the possible applications of this technology, using both the amplitude and phase information contained in the THz waveforms. We describe the latest results in tomographic imaging, in which waveforms reflected from an object can be used to form a three-dimensional representation. Advanced signal processing tools are exploited for the purposes of extracting tomographic results, including spectroscopic information about each reflecting layer of a sample. We also describe the application of optical near-field techniques to the THz imaging system. Substantial improvements in the spatial resolution are demonstrated. Received: 29 January 1999 / Published online: 7 April 1999     

双光子荧光与相干反斯托克斯拉曼散射显微成像技术的实验研究

双光子荧光与相干反斯托克斯拉曼散射同属于三阶非线性效应,二者之间的差异与联系是一个值得研究的问题.本文基于自行搭建的超连续谱近红外宽带相干反斯托克斯拉曼散射显微成像系统进行光谱成像,同时通过理论与实验对比分析了双光子荧光与相干反斯托克斯拉曼散射图像存在差异的原因.结果表明,具有亚微米以上横向分辨率的相干反斯托克斯拉曼散射成像系统,可以使用较大尺寸的荧光珠进行双光子荧光成像,通过解卷积得到双光子荧光成像的系统分辨率,并将它近似等效于相干反斯托克斯拉曼散射成像系统的当下分辨率.如果需要得到相干反斯托克斯拉曼散射成像系准确的分辨率结果,就必须使用尺寸比相干反斯托克斯拉曼散射成像系统实际分辨率小的球形样品进行实验测量.     

Phase-coded aperture for optical imaging

For the optical spectrum region, we describe a novel phase-coded aperture imaging system that can be used in a computational imaging camera. The optical design includes a phase-only screen followed by a detector array. A specific diffraction pattern forms at the detector array when the wavefront from a point source object passes through the phase screen. Since diffraction effects cannot be ignored in the optical regime, an iterative phase retrieval method is used to calculate the phase coded screen. Correlation type processing can be applied for the image recovery. Computer simulation results are presented to illustrate the excellent imaging performance of this camera.     

Visualization of a Phase Object by Two-Wave Coupling in a Photorefractive Bismuth Silicon Oxide Crystal

We propose a method to visualize a phase object using a locally-controllable image amplification scheme we developed earlier which is based on two-wave coupling in a bismuth silicon oxide (Bi₁₂SiO₂₀, or BSO) crystal. In this method the BSO crystal is used as a phase plate in the configuration of Zernike’s phase contrast imaging system. The principle of the phase-visualization with two-wave coupling is presented. An experimental result to verify the proposed method is shown.     

Distributed imaging using an array of compressive cameras

We describe a distributed computational imaging system that employs an array of feature specific sensors, also known as compressive imagers, to directly measure the linear projections of an object. Two different schemes for implementing these non-imaging sensors are discussed. We consider the task of object reconstruction and quantify the fidelity of reconstruction using the root mean squared error (RMSE) metric. We also study the lifetime of such a distributed sensor network. The sources of energy consumption in a distributed feature specific imaging (DFSI) system are discussed and compared with those in a distributed conventional imaging (DCI) system. A DFSI system consisting of 20 imagers collecting DCT, Hadamard, or PCA features has a lifetime of 4.8× that of the DCI system when the noise level is 20% and the reconstruction RMSE requirement is 6%. To validate the simulation results we emulate a distributed computational imaging system using an experimental setup consisting of an array of conventional cameras.     

X射线衍射增强成像中吸收、折射以及散射衬度的计算层析

X射线相位衬度成像是一种新型的X射线成像技术,通过记录射线穿过物体后相位的改变对物体进行成像,可以提供比传统的X射线吸收成像更高的图像衬度以及空间分辨力。衍射增强成像方法(Diffraction enhancedimaging,DEI)是X射线相位衬度成像方法之一,利用一块放置在物体和探测器之间的分析晶体提取物体的吸收、折射以及散射信息并进行成像。将衍射增强成像方法与计算机断层成像技术(Computerized Tomography)进行结合,利用吸收、散射以及折射信息,分别采用滤波反投影以及雷登(Radon)变换,对昆虫样品——蜜蜂进行计算层析重建,获得了好于X射线吸收计算层析的重建结果,验证了衍射增强成像信息分离计算层析的优越性。     

光栅成像的锥束相位CT重建算法

X射线相位衬度成像对弱吸收物质有着独有的高密度分辨率,在医学、生物学、材料学等领域显示出良好的应用前景.但是其中的干涉成像法、衍射增强成像法和同轴成像法具有一定局限性,难以被广泛应用.光栅成像克服了以往相位衬度成像的缺陷,也使相位衬度成像向锥束成像发展成为可能.本文致力于锥束相位X射线计算机断层摄影术(CT)重建算法的研究,根据基于光栅的锥束相位成像的特点,利用吸收CT中FDK (Feldkamp-Davis-Kress)重建算法的思想,发展出适用于锥束相位成像的CT重建方法.该方法为滤波反投影类型,以相位一阶导数像为投影值,直接重建物体的相位项.通过仿真验证了算法的正确性.     

天文图像多帧盲反卷积收敛性的增强方法

天文图像多帧盲反卷积的收敛性受到初始目标、约束条件和光子噪声等因素的影响.提出了用实际光学成像系统参数确定频率带宽有限约束的方法.用Knox-Thompson 方法重构初始目标相位形成盲反卷积算法的初始目标函数.研究了一种新颖的有效减小光子噪声、边缘效应和振铃现象的方法.根据最大似然估计理论，用期望最大化的优化方法建立了改进的严格约束多帧盲反卷积算法.模拟图像和实际天文图像的复原结果表明，所建立的多帧盲反卷积，可以有效克服大气湍流和减小光子噪声，改善天文观察图像的分辨率，并部分消除光学系统衍射效应对恢复图像的影响. 关键词： 大气光学 天文观测 图像处理和恢复