Host-guest interactions at self-assembled monolayers of cyclodextrins on gold

We have developed synthesis routes for the introduction of short and long dialkylsulfides onto the primary side of alpha-, beta-, and gamma-cyclodextrins. Monolayers of these cyclodextrin adsorbates were characterized by electrochemistry, wettability studies, X-ray photoelectron spectroscopy (XPS), time-of-flight secondary ion mass spectrometry (TOF-SIMS), and atomic force microscopy (AFM). The differences in thickness and polarity of the outerface of the monolayers were measured by electro-chemistry and wettability studies. On average about 70% of the sulfide moieties were used for binding to the gold, as measured by XPS. Tof-SIMS measurements showed that the cyclodextrin adsorbates adsorb without any bond breakage. AFM measurements revealed for beta-cyclodextrin monolayers a quasi-hexagonal lattice with a lattice constant of 20.6 A, which matches the geometrical size of the adsorbate. The alpha-cyclodextrin and gamma-cyclodextrin monolayers are less ordered. Interactions of the anionic guests 1-anilinonaphthalene-8-sulfonic acid (1,8-ANS) and 2-(p-toluidinyl)naphthalene-6-sulfonic acid (2,6-TNS) and the highly ordered monolayers of heptapodant beta-cyclodextrin adsorbates were studied by surface plasmon resonance (SPR) and electrochemical impedance spectroscopy. The SPR measurements clearly showed interactions between a beta-cyclodextrin monolayer and 1,8-ANS. Electrochemical impedance spectroscopy measurements gave high responses even at low guest concentrations (< or = 5 microM). The association constant for the binding of 1,8-ANS (K = 289,000 +/- 13,000M-1) is considerably higher than the corresponding value in solution. (Partial) methylation of the secondary side of the beta-cyclodextrin strongly decreases the binding.     

Modeling competitive guest binding to beta-cyclodextrin molecular printboards

Anchoring of functionalized guest molecules to self-assembled monolayers (SAMs) is key to the development of molecular printboards for nanopatterning. One very promising system involves guest binding to immobilized beta-cyclodextrin (beta-CD) hosts, with guest:host recognition facilitated by a hydrophobic interaction between uncharged anchor groups on the guest molecule and beta-CD hosts self-assembled at gold surfaces. We use molecular dynamics free energy (MDFE) simulations to describe the specificity of guest:beta-CD association. We find good agreement with experimental thermodynamic measurements for binding enthalpy differences between three commonly used phenyl guests: benzene, toluene, and t-butylbenzene. van der Waals interaction with the inside of the host cavity accounts for almost all of the net stabilization of the larger phenyl guests in beta-CD. Partial and full methylation of the secondary rim of beta-CD decreases host rigidity and significantly impairs binding of both phenyl and larger adamantane guest molecules. The beta-CD cavity is also very intolerant of guest charging, penalizing the oxidized state of ferrocene by at least 7 kcal/mol. beta-CD hence expresses moderate specificity toward uncharged organic guest molecules by van der Waals recognition, with a much higher specificity calculated for electrostatic recognition of organometallic guests.     

Molecular Recognition by Cyclophane/Guanidinium Supramolecular Receptor Embedded at the Air-Water Interface

In order to develop a supramolecular receptor through a self-assembling process, a site-specific host and an inclusion-type host were mixed as a Langmuir monolayer, and guest binding and pressure-induced fluorescence emission were investigated. A guanidinium amphiphile and several cyclophanes carrying hydrophobic moieties were used as the host molecules; molecular recognition of an aqueous fluorescent guest, 6-p-toluidino-2-naphthalenesulfonic acid (TNS) by binary mixed receptor monolayers was evaluated by a surface pressure-molecular area (π-A) isotherm and a surface fluorescence measurement. An apparent increase in fluorescence intensity was observed when the mixed monolayers of the guanidinium and cyclophane amphiphiles were compressed on an aqueous TNS solution. In contrast, single-component monolayers of the guanidinium or the cyclophane did not show a significant increase in fluorescence emission. In the mixed monolayers, the guest TNS would be bound to the interface by strong electrostatic interaction with the guanidinium, and inclusion of the formed complex probably suppresses the quenching effect in polar medium and/or self-quenching. Experiments with various mixing ratios of these components suggest selective formation of an equimolar cooperative receptor of the guanidinium and the cyclophane. Investigation of the cyclophane structures by fluorescence emission and a competitive binding experiment with another guest were also carried out.     

Structural and chemical characterization of monofluoro-substituted oligo(phenylene-ethynylene) thiolate self-assembled monolayers on gold

Monolayers of oligo(phenylene-ethynylene) (OPE) molecules have exhibited promise in molecular electronic test structures. This paper discusses films formed from a novel molecule within this class, 2-fluoro-4-phenylethynyl-1-[(4-acetylthio)phenylethynyl]benzene (F-OPE). The conditions of self-assembled monolayer (SAM) formation were systematically altered to fabricate reproducible high-quality molecular monolayers from the acetate-protected F-OPE molecule. Detailed characterization of the F-OPE monolayers was performed by using an array of surface probes, including reflection absorbance infrared spectroscopy (RAIRS), contact angle (CA) measurements, spectroscopic ellipsometry (SE), X-ray photoelectron spectroscopy (XPS), ultraviolet photoelectron spectroscopy (UPS), and atomic force microscopy (AFM). XPS and RAIRS established that the SAM formed without removal of the F substituent and without oxidation of the thiol. The monolayer thickness, determined from SE and AFM based nanolithography, was consistent with the formation of a densely packed monolayer. The valence electronic structure of the SAM was consistent with an aromatic structure shifted by the electron-withdrawing fluorine substituent and intermolecular coupling within an oriented array of molecules.     

Thermodynamics of molecular recognition of bile salts by 3,6'-(oligoethylenediamino-bridged) beta-cyclodextrin dimers

The molecular recognition behaviors of some representative bile salts by three 3,6'-bridged beta-cyclodextrin dimers with oligo(ethylenediamino) linkers in different lengths, i.e. 3,6'-(ethylenediamino-bridged) beta-cyclodextrin dimer (1), 3,6'-(diethylenetriamino-bridged) beta-cyclodextrin dimer (2), and 3,6'-(triethylenetetraamino-bridged) beta-cyclodextrin dimer (3), were investigated in aqueous phosphate buffer solution (pH 7.20) at 25 degrees C by means of 2D NMR spectroscopy and isothermal titration microcalorimetry. Owing to the cooperative host-linker-guest binding mode between host and guest, these 3,6'-bridged beta-cyclodextrin dimers showed significantly enhanced binding abilities and molecular selectivities as compared with native beta-cyclodextrin through the simultaneous contributions of hydrophobic, hydrogen bond, and electrostatic interactions. Thermodynamically, the inclusion complexations of these beta-cyclodextrin dimers with bile salts were mainly driven by large enthalpic gain, accompanied by slight to moderate entropic loss. An enthalpy-entropy compensation analysis demonstrated that these beta-cyclodextrin dimers experienced large conformational changes and extensive desolvation effect upon inclusion complexation with guest molecules.     

Comparison of Si-O-C interfacial bonding of alcohols and aldehydes on Si(111) formed from dilute solution with ultraviolet irradiation

Aliphatic alcohols and aldehydes were reacted with the Si(111)-H surface to form Si-O-C interfacial bonds from dilute solution by using ultraviolet light. The resulting monolayers were characterized by using transmission infrared spectroscopy, spectroscopic ellipsometry, and contact angle measurements. The effect of different solvents on monolayer quality is presented. The best monolayers were formed from CH(2)Cl(2). The optimized monolayers were thoroughly characterized to determine the film structure and monolayer stability. The UV-promoted, alcohol-functionalized, and aldehyde-functionalized monolayers are of comparable quality to those previously prepared by other means. Although both molecules are tethered through a Si-O-C bond, the film reactivity is distinctly different with the aldehyde films being more chemically resistant. The differences in chemical reactivity, vibrational spectra, hydrophobicity, and ellipsometric thickness between the alcohol and aldehyde monolayers are attributed to a difference in molecular coverage and monolayer formation.     

Solid-supported monolayers and bilayers of amphiphilic beta-cyclodextrins

This paper describes the adsorption and spreading of beta-cyclodextrin (CD) vesicles on hydrophobic and hydrophilic substrates, which involves a transition from bilayer vesicles to planar molecular monolayers or bilayers. On substrates that are patterned with self-assembled monolayers by microcontact printing (muCP), the CD vesicles preferentially adsorb on hydrophobic areas instead of hydrophilic (nonionic) areas, and on cationic areas instead of hydrophilic (nonionic) areas. Supported monolayers of amphiphilic cyclodextrins CD1 and CD2 were obtained by adsorption of CD vesicles to hydrophobic substrates, and supported bilayers of amphiphilic cyclodextrins CD1 and CD2 were prepared by adsorption of CD vesicles on cationic substrates. Contact angle goniometry, atomic force microscopy and confocal fluorescence microscopy (CFM) were used to analyze the supported CD layers. The fluidity of the supported CD layers was verified using fluorescence recovery after photobleaching experiments. The supported layers function as a supramolecular platform that can bind suitable guest molecules through inclusion in the CD host cavities. Additionally, the CD host layers were patterned with fluorescent guest molecules by supramolecular muCP on the supported CD layers. The host-guest interactions were investigated with CFM and fluorescence resonance energy transfer experiments.     

Drug-Cyclodextrin Association Constants Determined by Surface Tension and Surface Pressure Measurements

The complexation reaction between the amphiphilic peptide antibiotic polymyxin B and naturally occurring cyclodextrins, used as potential drug carriers, was quantitatively evaluated from surface tension measurements at various drug concentrations. The association constant, Ka, of polymyxin B:beta-cyclodextrin inclusion complex formation of 1:1 stoichiometry was determined from the change in the drug interfacial activity upon the addition of beta-cyclodextrin at the excess solution concentration (10(-3) M). The obtained Ka value is discussed in terms of molecular matching of the host cyclodextrin cavity and the guest drug molecule. Copyright 1999 Academic Press.     

Molecular recognition in cyclodextrin complexes of amino acid derivatives: the effects of kinetic energy on the molecular recognition of a pseudopeptide in a nonconstraining host environment as revealed by a temperature-dependent crystallographic study

The crystal structure of a triclinic 2:2 inclusion complex of beta-cyclodextrin with N-acetyl-L-phenylalanine methyl ester has been determined at several temperatures between 298 and 20 K to further study molecular recognition using solid-state supramolecular beta-cyclodextrin complexes. The study reveals kinetic energy dependent changes in guest molecule conformations, orientations, and positions in the binding pocket presented by the crystal lattice. Accompanying these changes are observable differences in guest-guest interactions and hydrogen-bonding interactions in the binding pocket that involve guest molecules, water of hydration molecules, and beta-cyclodextrin molecules. On the basis of the differences observed in the crystal structures, we present a solid-state example of a system that displays the properties of both classical and quantum chemical models. At higher temperatures, the structure conforms to a classical mechanical model with dynamic disorder. At lower temperatures, the observations conform to examples in which there is static disorder representative of models in which quantum states differing in conformation, position, and orientation of components in the crystal structure are occupied. Ab initio theoretical calculations on the different guest molecule conformations have been carried out. Superpositions of theoretical electrostatic surface potential diagrams on the observed molecular positions in the complexes provide confidence that the deconvolution of the guest molecule disorder is acceptable. Temperature-dependent solid-state magic angle spinning deuteron NMR measurements provide evidence for large-amplitude, diffusive motion on a microsecond time scale in the complex.     

Spontaneous association of hydrophobized dextran and poly-beta-cyclodextrin into nanoassemblies. Formation and interaction with a hydrophobic drug

New nanoassemblies were instantaneously prepared by mixing two aqueous solutions, one containing a beta-cyclodextrin polymer (pbetaCD), and the other a hydrophobically modified by alkyl chains dextran (MD). The formation mechanism and the inner structure of these nanoassemblies were analysed using surface tension measurements and (1)H NMR spectroscopy. The effect of a hydrophobic guest molecule, such as benzophenone (BZ), on the formation and stability of the nanoassemblies was also evaluated. MD exhibited the typical behaviour of a soluble amphiphilic molecule and adsorbed at the air/water interface. Whereas the injection of native beta-CDs in the solution beneath the adsorbed MD monolayer did not produce any change in the surface tension, that of the pbetaCD resulted in an increase in the surface tension, indicating the desorption of the polymer from the interface. This result accounts for a cooperative effect of beta-CDs linked together in the pbetaCD polymer on dextran desorption. The presence of benzophenone in the system hindered the sequestration of dextran alkyl moieties by beta-CD in the polymer without impeding the formation of associative nanoassemblies of 100-200 nm. (1)H NMR investigations demonstrated that, in the BZ-loaded nanoassemblies, the hydrophobic molecule was mainly located into the cyclodextrin cavities.     

Scanning tunneling microscopy studies of monolayer templates: alkylthioethers and alkylethers

Scanning tunneling microscopy has been used to determine the molecular ordering in stable, ordered monolayers formed from long-chain normal and substituted alkanes in solution on highly oriented pyrolytic graphite surfaces. Monolayers were initially formed using an overlying solution of either a symmetrical dialkylthioether or a symmetrical dialkylether. Initially pure thioether solutions were then changed to nearly pure solutions of the identical chain-length ether, and vice versa. The direct application of a pure solution of long-chain symmetrical ethers onto graphite produced a lamellate monolayer within which the individual molecular axes were oriented at an angle of approximately 65 degrees to the lamellar axes. In contrast, a pure solution of long-chain symmetrical thioethers on graphite produced a monolayer within which the molecular axes were oriented perpendicular to the lamellar axes. When ethers were gradually added to solutions overlying pure thioether monolayers, the ethers substituted into the existing monolayer structure. Thus, the ether molecules could be forced to orient in the perpendicular thioether-like manner through the use of a thioether template monolayer. Continued addition of ethers to the solution ultimately produced a nearly pure ether monolayer that retained the orientation of the thioether monolayer template. However, a monolayer of thioether molecules formed by gradual substitution into an ether monolayer did not retain the 65 degrees orientation typical of dialkylethers, but exhibited the 90 degrees orientation typical of dialkylthioether monolayers. The thioethers and ethers were easily distinguished in images of mixed monolayers, allowing both an analysis of the distribution of the molecules within the mixed monolayers and a comparison of the monolayer compositions with those of the overlying solutions. Substitution of molecules into the template monolayer did not proceed randomly; instead, a molecule within a monolayer was more likely to be replaced by a molecule in the overlying solution if it was located next to a molecule that had already been replaced.     

正十八烷醇在HOPG上形成自组装膜的吸附特性

研究了正十八烷醇在高定向热解石墨(HOPG)上形成自组装膜的吸附特性, 正十八烷醇在室温下从溶液中吸附至HOPG上形成整齐定向排列的单层自组装膜. 通过扫描隧道显微镜(STM)、接触角测量和X射线光电子能谱(XPS)分析了正十八烷醇单层自组装膜在HOPG上的结构. 实验结果表明, 正十八烷醇自组装膜在基底上成平铺或直立形态, 由于分子在基底上覆盖程度的不同, 会导致它在基底上排列的方式有所不同.     

Surface structure and chemical switching of thioctic acid adsorbed on Au(111) as observed using near-edge X-ray absorption fine structure

Thioctic acid (alpha-lipoic acid) is a molecule with a large disulfide-containing base, a short alkyl chain with four CH2 units, and a carboxyl termination. Self-assembled monolayer (SAM) films ofthioctic acid adsorbed on Au(111) have been investigated with near-edge X-ray absorption fine structure (NEXAFS) spectroscopy and X-ray photoelectron spectroscopy (XPS) to determine film quality, bonding, and morphology. Using standard preparation protocols for SAMs, that is, dissolving thioctic acid in ethanol and exposing gold to the solution, results in poor films. These films are highly disordered, contain a mixture of carboxyl and carboxylate terminations, have more than monolayer coverage, and exhibit unbound disulfide. Conversely, forming films by dissolving 1 mmol thioctic acid into 5% acetic acid in ethanol (as previously reported with carboxyl-terminated alkanethiols) forms ordered monolayers with small amounts of unbound sulfur. NEXAFS indicates tilted over endgroups with the carboxyl group normal on average 38 degrees from the surface normal. Slight angle-dependent intensity modulations in other features indicate alkyl chains statistically more upright than prostrate on the surface. Reflection-absorption Fourier transform infrared (RA-FTIR) spectra indicate hydrogen bonding between neighboring molecules. In such well-formed monolayers, a stark reorientation occurs upon deprotonation of the endgroup by rinsing in a KOH solution. The carboxylate plane normal is now about 66 degrees from sample normal, a much more upright orientation. Data indicate this reorientation may also cause a more upright orientation to the alkyl portion of the molecules.     

Directed self-assembly of functionalized silica nanoparticles on molecular printboards through multivalent supramolecular interactions

Silica nanoparticles functionalized with beta-cyclodextrin (CD) host molecules (5) have been prepared by reacting carboxylic active ester-terminated silica nanoparticles (4) with CD heptamine. Silica nanoparticles functionalized with glucosamine (6), having similar surface properties as 5 but lacking the host-guest recognition motif, were used to perform blank experiments. The CD-functionalized silica nanoparticles 5 were determined by TEM to be 55 +/- 6 nm in size. They exhibited pH-dependent aggregation, which is explained by the presence of free amino and carboxylic acid groups on the particle surface, which was corroborated by zeta potential measurements. The functionalization with CD was further confirmed by host-guest studies in solution and at CD-functionalized silicon substrates. The addition of an adamantyl-terminated dendrimer, capable of multivalent host-guest binding with CD, led to strong aggregation of the CD particles 5, but not of the glucosamine-functionalized 6. Furthermore, 5 gave strong adsorption to CD monolayers on silicon onto which adamantyl-terminated dendrimers were adsorbed, whereas 6 did not. The good discrimination between dendrimer-covered and uncovered areas of the CD monolayer substrates allowed the directed self-assembly of the silica particles 5 onto dendrimer-patterned areas created by microcontact printing.     

Supramolecular self-assembly of cyclodextrin and higher water soluble guest: thermodynamics and topological studies

The supramolecular interactions between Imipramine hydrochloride (IMI), a tricyclic antidepressant, and beta-cyclodextrin (betaCD) have been investigated by experimental techniques and theoretical calculations. The association between these molecules might be lead to a host/guest compound, in which the physical chemistry properties of the guest molecule, such as high solubility, can be decreased. These new properties acquired by the inclusion phenomena are important to develop a strategy for pharmaceutical formulation. Nuclear magnetic resonance and horizontal attenuated total reflectance provided relevant information on the complex stoichiometries and the sites of interactions between the host and guest molecules. Stoichiometries of 1:2, 1:1, and 2:1 betaCD/IMI have been detected in solution. Self-diffusion coefficient and dynamic light scattering analysis provided information on the self-aggregation of the complex. Also, isothermal titration calorimetry studies indicated the existence of equilibrium between different complexes in solution. In order to determine the preferred arrangement for the inclusion complex formed by the IMI molecule and betaCD, theoretical calculations were performed. Of all proposed supramolecular structures, the 2:1 betaCD/IMI complex was calculated to be the most energetically favorable, in both gas and aqueous phases. The calculations indicated that the intermolecular hydrogen bonds involving the hydroxyl groups of betaCD play a major role in stabilizing the supramolecular 2:1 structure, corroborating experimental findings.     

Thermodynamic characteristics and Langmuir-Blodgett deposition behavior of mixed DPPA/DPPC monolayers at air/liquid interfaces

The role of dipalmitoylphosphatic acid (DPPA) as a transfer promoter to enhance the Langmuir-Blodgett (LB) deposition of a dipalmitoylphosphatidylcholine (DPPC) monolayer at air/liquid interfaces was investigated, and the effects of Ca2+ ions in the subphase were discussed. The miscibility of the two components at air/liquid interfaces was evaluated by surface pressure-area per molecule isotherms, thermodynamic analysis, and by the direct observation of Brewster angle microscopy (BAM). Multilayer LB deposition behavior of the mixed DPPA/DPPC monolayers was then studied by transferring the monolayers onto hydrophilic glass plates at a surface pressure of 30 mN/m. The results showed that the two components, DPPA and DPPC, were miscible in a monolayer on both subphases of pure water and 0.2 mM CaCl2 solution. However, an exception occurs between X(DPPA)=0.2 and 0.5 at air/CaCl2-solution interface, where a partially miscible monolayer with phase separation may occur. Negative deviations in the excess area analysis were found for the mixed monolayer system, indicating the existence of attractive interactions between DPPA and DPPC molecules in the monolayers. The monolayers were stable at the surface pressure of 30 mN/m for the following LB deposition as evaluated from the area relaxation behavior. It was found that the presence of Ca2+ ions had a stabilization effect for DPPA-rich monolayers, probably due to the association of negatively charged DPPA molecules with Ca2+ ions. Moreover, the Ca2+ ions may enhance the adhesion of DPPA polar groups to a glass surface and the interactions between DPPA polar groups in the multilayer LB film structure. As a result, Y-type multilayer LB films containing DPPC could be fabricated from the mixed DPPA/DPPC monolayers with the presence of Ca2+ ions.     

Simple methods for the direct assembly, functionalization, and patterning of acid-terminated monolayers on Si111

This article describes mild methods to directly assemble, functionalize, and pattern monolayers of undecylenic acid on hydrogen-terminated Si(111). These monolayers were assembled under very mild conditions from a neat solution of undecylenic acid containing 0.1 mol % 4-(decanoate)-2,2,6,6-tetramethylpiperidinooxy at room temperature without the need for UV light. Because of these mild conditions, monolayers exposing carboxylic acids could be assembled in one step without the need to protect the acid prior to its assembly. The monolayers were extensively characterized by horizontal attenuated total reflection infrared spectroscopy, X-ray photoelectron spectroscopy (XPS), and contact angle goniometry. The monolayers bonded to the silicon surface preferentially through the olefin with no detectable bonds between the carboxylic acids and silicon. The crystallinity of the monolayer was studied by infrared spectroscopy through the antisymmetric--v(a)(CH(2))--and symmetric--v(s)(CH(2))--stretches for methylene. Because it is important for future applications to assemble functional surfaces, methods to react the acid-terminated monolayers with trifluoroacetic anhydride and triethylamine to yield a symmetric anhydride on the monolayer were studied. These anhydrides were reacted with a variety of milligram-quantity amines to yield amide-terminated surfaces. This method was general, and a variety of amines could be bonded to the monolayer. The stabilities of these monolayers upon exposure to ambient conditions and under a variety of solvents were described. Because patterned monolayers have found wide applications, we have developed methods to pattern 1-octadecylamine and poly(ethylenimine) on the micrometer scale using soft lithography. In addition, polymer brushes of polynorbornene with thicknesses from 32 to 150 nm were grown from monolayers patterned with the Grubbs' catalyst. The patterned surfaces were imaged by scanning electron microscopy, scanning probe microscopy, and ellipsometry to determine the thicknesses of the patterns and the fidelity of the method.     

Preparation of alkanethiol monolayers on mild steel surfaces studied with sum frequency generation and electrochemistry

An n-alkanethiol, octadecanethiol (ODT), monolayer was successfully prepared onto an oxide-free mild steel (MS) surface under cathodic polarization in a 0.1 M LiCl/CH(3)OH solution containing 1 mM ODT. Cyclic voltammetry (CV) and electrochemical impedance (EIS) and sum frequency generation (SFG) spectroscopy were applied to study and characterize the adsorption of ODT at a MS surface. In 0.1 M LiCl/CH(3)OH solution containing 1 mM ODT, CV of the MS electrode shows a dramatic decrease in charging current and a positive shift in oxidation potential when compared to a solution without ODT. The interfacial capacitance was obtained as 2.52 microF/cm(2) from the impedance data. An average chain tilt angle of 48 degrees for the ODT molecules was deduced from the comparison of the interfacial capacitances of the ODT/MS and ODT/Au monolayers. X-ray photoelectron spectroscopy confirmed the formation of the ODT monolayer on mild steel. The ppp SFG spectrum of the ODT-modified MS features three strong methyl vibrational modes at 2877, 2943, and 2967 cm(-1), indicating the formation of the oriented and densely packed ODT monolayer. However, the appearance of the two weak CH(2) groups' vibrational modes at 2850 and 2914 cm(-1) implies the presence of defects in the ODT monolayer. ODT/Au films were prepared to compare with the ODT/MS films. Orientation analysis of the air/solid interface suggests that the methyl group of ODT/Au films has a tilt angle of 30 degrees , while the methyl group of ODT/MS films has a tilt angle of 23 degrees . Water was found to have an impact on the shape of the SFG spectra of ODT/MS. This suggests that the solution penetrated through the defects to reach the MS surface.     

Grafting of single, stimuli-responsive poly(ferrocenylsilane) polymer chains to gold surfaces

Redox-responsive poly(ferrocenylsilane) (PFS) polymer molecules were attached individually to gold surfaces for force spectroscopy experiments on the single molecule level. By grafting ethylenesulfide-functionalized PFS into the defects of preformed self-assembled monolayers (SAMs) of different omega-mercaptoalkanols on Au(111), the surface coverage of PFS macromolecules could be conveniently controlled. Atomic force microscopy (AFM), contact angle, as well as cyclic and differential pulse voltammetry measurements were carried out to characterize the morphology, wettability, and surface coverage of the grafted layers. The values of the PFS surface coverage were found to depend on the chain length of the omega-mercaptoalkanol molecules and on the concentration of the PFS solution but not on the insertion time or on the molar mass of PFS. The equilibrium surface coverages were successfully described by Langmuir adsorption isotherms. For low-surface coverage values (< 6.2 x 10(-4) chain/nm2), achieved by PFS insertion from very dilute solutions (8 x 10(-6) M) into long-chain SAMs, AFM and differential pulse voltammetry showed that surfaces exposing isolated individual polymer chains were obtained. The isolated PFS macromolecules were subjected to in situ AFM-based single molecule force spectroscopy (SMFS) measurements. The single chain elasticity of PFS in isopropanol (and ethanol) was fitted with the modified freely jointed chain (m-FJC) model. This procedure yielded a Kuhn segment length of 0.33 +/- 0.05 nm and a segment elasticity of 32 +/- 5 nN/nm.