The highly regiospecific synthesis and crystal structure determination of 1,1′-2,5′ substituted ring-locked ferrocenes

1,1′-Ferrocene biscarboxaldehyde (1) has been prepared and the aldehyde groups were subsequently protected with acetal groups to produce 1,1′-bisacetalferrocene (2). A ring-locked ferrocene was synthesised by further derivatisation of the cyclopentadiene rings at the 2,2′ positions with phosphine substituents to produce 2,2′-bis-(acetal)-1,1′-diphenylphosphinoferrocene (3), which was subsequently coordinated to either a nickel chloride (5) or nickel bromide (6) metal centre. The ring-locked ferrocene complexes produced 2,5′-bis-(acetal)-1,1′-diphenylphosphinoferrocene substitution patterns. The acetal protecting groups of 2,2′-bis-(acetal)-1,1′-diphenylphosphinoferrocene were removed to produce 1,1′-bis-carboxaldehyde-2,2′-diphenylphosphinoferrocene (4). The Cp rings of 1,1′-bisacetalferrocene were also further derivatised at the 2,2′ positions with a silane to produce the ring-locked 1,1′-siloxane-2,5′-bisacetalferrocenophane (7). The acetal protecting groups were removed from this to produce 1,1′-siloxane-2,5′-ferrocenophanecarboxaldehyde (8). For both the phosphine and siloxane electrophiles, the substitution on the Cp rings gives chiral products (obtained as racemic mixtures). Due to the highly regioselective nature of the reaction and diastereoselectivity in the products only C₂-symmetric compounds were observed without the presence of meso diastereoisomers. Subsequent ring-locking forced the Cp rings to rotate, leading to 1,1′-ring-locked ferrocenes with 2,5′-arrangement of the acetal groups (i.e. on opposite faces of the ferrocene unit).     

Synthesis and characterization of polybinaphthalene incorporating chiral (R) or (S)-1,1′-binaphthalene and oxadiazole units by Heck reaction

Chiral conjugated polymers P-1 and P-2 were synthesized by the polymerization of (R)-3,3′-diiodo-2,2′-bisbutoxy-1,1′-binaphthalene ((R)-M-1) and (S)-3,3′-diiodo-2,2′-bisbutoxy-1,1′-binaphthalene ((S)-M-1) with 2,5-bis(4-vinylphenyl)-1,3,4-oxadiazole (M-2) under Pd-catalyzed Heck coupling reaction, respectively. Both monomers and polymers were analysed by NMR, MS, FT-IR, UV, DSC-TG, fluorescent spectroscopy, GPC and CD spectra. The chiral conjugated polymers exhibit strong Cotton effect in their circular dichroism (CD) spectra indicating a high rigidity of polymer backbone. CD spectra of polymers P-1 and P-2 are almost identical and have opposite signs for their position. These polymers have strong blue fluorescence.     

A convenient synthesis of substituted 2,2′:6′,2″-terpyridines

The 2,2′:6′,2″-terpyridines 7a-c were prepared in good yield by reacting α-acetoxy-α-chloro-β-keto-esters 3a-c with bis-amidrazone 4 and 2,5-norbornadiene 6 in ethanol at reflux. Compounds 3a and 3b gave the 2,2′:6′,2″-terpyridines 9a and 9b, respectively, in moderate yield when treated with compound 4 and enamine 8.     

S-Transalkylation/ring closing metathesis as a route to azathiamacrocycles incorporating 2,2′-bipyridine subunits

A new route to cyclophanes 6a,b incorporating 2,2′-bipyridine subunits has been elaborated using as the key steps (1) S-transalkylation of 6,6′-bis(methylsulfanyl)-2,2′-bipyridines 2a,b with ethyl bromoacetate resulting in the formation of 6,6′-bis[(ethoxycarbonyl)methylsulfanyl]-2,2′-bipyridines 3a,b and (2) ring-closing metathesis of the corresponding alkenyl ethers 5a,b.     

A convenient synthesis of substituted 2,2′:6′,2″-terpyridines

The 2,2′:6′,2″-terpyridines 8a and 8b were prepared in good yield by reacting α-acetoxy-α-chloro-β-keto-esters 1 (R¹ = ⁿPr and Ph) with the bis-amidrazone 7 and 2,5-norbornadiene 5 in ethanol at reflux.     

Synthesis and crystal structure of 2′-deoxy-2′-fluoro-4′-thioribonucleosides: substrates for the synthesis of novel modified RNAs

We report herein the synthesis of appropriately protected 2′-deoxy-2′-fluoro-4′-thiouridine (5), -thiocytidine (7), and -thioadenosine (35) derivatives, substrates for the synthesis of novel modified RNAs. The synthesis of 5 and 7 was achieved via the reaction of 2,2′-O-anhydro-4′-thiouridine (3) with HF/pyridine in a manner similar to that of its 4′-O-congener whereas the synthesis of 35 from 4′-thioadenosine derivatives was unsuccessful. Accordingly, 35 was synthesized via the glycosylation of the fluorinated 4-thiosugar 25 with 6-chloropurine. The X-ray crystal structural analysis revealed that 2′-deoxy-2′-fluoro-4′-thiocytidine (8) adopted predominately the same C3′-endo conformation as 2′-deoxy-2′-fluorocytidine.     

Efficient bimetallic titanium catalyst for carbonyl-ene reaction

A new family of achiral 3,3′,5,5′-tetrasubstituted-2,2′,6,6′-tetrahydroxy biphenyl ligand 4 was developed. The axial chirality of the ligand could be induced by the chelation of 2,2′,6,6′-tetrahydroxy groups with (R)-BINOL-Ti(OⁱPr)₂ to form an axially chiral bimetallic titanium catalyst 9. Compared with (R)-BINOL-Ti(OⁱPr)₂ catalyst, this novel catalyst 9 exhibited excellent activity and enantioselectivity for the carbonyl-ene reaction of methylstyrene and ethyl glyoxylate. 3,3′,5,5′-Tetrasubstituted groups showed a remarkable effect on both enantioselectivity and yield. With 9d prepared from 3,3′,5,5′-tetramethyl-2,2′,6,6′-tetrahydroxy biphenyl 4d as the catalyst, the best result, up to 97.6% ee and 99% yield, was obtained. Additionally, the bimetallic catalyst 9 also showed better catalytic capability than the corresponding monometallic catalyst.     

Intramolecular Diels-Alder reaction of α-fluoroacrylate derivatives promoted by novel bidentate aluminum Lewis acid

Intramolecular Diels-Alder (IMDA) reaction of α-fluoroacrylate derivatives 1a-e having 1,7,9-decatrienoate system is efficiently promoted by the novel bidentate Lewis acid A generated in situ by mixing 3,3′,5,5′-tetrabromo-1,1′-biphenyl-2,2′-diol (Br₄BIPOL, 1 mol) and trimethylaluminum (2 mol). The IMDA reaction of α-fluoroacrylates proceeds via endo-boat transition state as in the case of the corresponding non-fluorinated acrylate.     

Application and details of photoinduced oxidative cyclization of 5-(4′,9′-methanocycloundeca-2′,4′,6′,8′,10′-pentaenylidene)pyrimidine-2,4,6(1,3,5H)-triones and related compounds

As novel methodology for synthesizing the furan ring, a photoinduced oxidative cyclization of 5-(4′,9′-methanocycloundeca-2′,4′,6′,8′,10′-pentaenylidene)pyrimidine-2,4,6(1,3,5H)-triones (7a-c) and related compounds 9a-c was accomplished to give 5,10-methanocycloundeca[4,5]furo[2,3-d]pyrimidine-2,4(1,3H)-dionylium tetrafluoroborates (8a-c⁺·BF₄⁻) and related compounds 2a-c⁺·BF₄⁻, respectively. In the photoinduced oxidative cyclization, the molecular oxygen in air is used as oxidant and the reaction proceeds under mild conditions to give desired products without byproducts, and thus, it is interesting from the viewpoint of the green chemistry. On the reactions of the mono-substituted derivatives 7d,e and 9e,f, the selectivity of the photoinduced cyclizations were reversed as compared with those of the DDQ-promoted oxidative cyclizations. By the NMR monitoring of the reactions of 7a and deuterated compound 7a-D₂ under degassed conditions, the details of the reaction pathway were clarified and rationalized on the basis of the MO calculation by the 6-31G^∗ basis set of the MP2 levels as well.     

Structure and isomerization in 4,4′-biimidazoles: a comparison of crystal structures and theoretical calculations of 2,2′-dimethyl-4,4′-biimidazole and 2,2′-dimethyl-4,4′-biimidazolium bis-trifluoroactate

The crystal structures of the compounds 2,2′-dimethyl-4,4′-biimidazole dihydrate (1) and 2,2′-dimethyl-4,4′-biimidazolium bistrifluoroacetate (2) have been determined. Compound 1 is linked into a three dimensional network via hydrogen bonding between the imidazole nitrogens and the water molecules, while compound 2 forms sheets through hydrogen bonding between the acetate and imidazolium ions. Theoretical calculations for 1 show that the particular prototropic tautomer observed in the crystal structure is not the lowest energy isomer. This observation is justified in terms of hydrogen bonding to the lattice water molecules.     

Synthesis of 2,2′-bipyridyl derivatives using aza Diels-Alder methodology

Amidrazone 1 and the tricarbonyl derivatives 2a-c gave the triazines 3a-c, respectively, which reacted with 2,5-norbornadiene 4 in boiling ethanol yielding the corresponding novel 2,2′-bipyridines 5a-c in good yield. Triazine 6 gave the 2,2′-bipyridyl derivative 7 (65%) with compound 4 in 1,2-dichlorobenzene at 140°C.     

The novel transition metal free synthesis of 1,1′-biazulene

Reaction of 1-azulenyl methyl sulfoxide (1) under acidic conditions gave the 1,1′-biazulene derivative 3. Methylmercapt groups of 3 were readily converted to formyl groups by Vilsmeier reaction to afford 3,3′-diformyl-1,1′-biazulene (4), which reacted with pyrrole in the presence of acetic acid to give the parent 1,1′-biazulene (5). Reaction of 5 with pyridine in the presence of Tf₂O gave 3,3′-dihydropyridyl-1,1′-biazulene derivative 6. 3,3′-(4-Pyridyl)-1,1′-biazulene (7) was obtained by the reaction of 3 with KOH in EtOH at room temperature in good yield.     

6,6′-Dimethyl-2,2′-bipyridine-4-ester: A pivotal synthon for building tethered bipyridine ligands

We describe an efficient and scalable synthesis of 4-carbomethoxy-6,6′-dimethyl-2,2′-bipyridine starting from easily available substituted 2-halopyridines and based on the application of modified Negishi cross-coupling conditions. This compound is a versatile starting material for the synthesis of 4-functionalized 2,2′-bipyridines bearing halide, alcohol, amine, and other functionalities, suitable for conjugation to biological material (2a-c, 3a-g). The utility of this compound in the construction of more complex architectures was further demonstrated by the synthesis of two bifunctional lanthanide chelators; an open chain ligand based on one 2,2′-bipyridine unit and a cryptand based on three 2,2′-bipyridine units [N₂(bpy)₃COOMe]. In the field of luminophoric biolabels, the photophysical properties of the corresponding Eu(III) cryptate are reported.     

Stabilization of (N-methyleneamino)imidoylketenes: synthesis of dipyrazolo[1,2-a;1′,2′-d][1,2,4,5]tetrazines

Thermolysis of substituted methyl 1-methyleneamino-4,5-dioxo-4,5-dihydro-1H-pyrrole-2-carboxylates 2a,b led to substituted dimethyl 3,9-dioxo-1,5,7,11-tetrahydro-1H,7H-dipyrazolo[1,2-a;1′,2′-d][1,2,4,5]tetrazine-1,7-dicarboxylates 4a,b and methyl 2,5-dihydro-5-oxo-1H-pyrazole-3-carboxylates 5a,b as minor products. The structure of compound 4a was determined by X-ray crystallography. The proposed mechanism of this conversion includes generation of (N-methyleneamino)imidoylketenes 6a,b and its intramolecular transformation to azomethine imines—5-oxo-2,5-dihydropyrazole-1-methylium-2-ides 7a,b, which undergo dimerization in head-to-tail manner yielding products 4a,b and partially hydrolyse to compounds 5a,b.     

Synthesis of (3′R,5′S)-3′-hydroxycotinine using 1,3-dipolar cycloaddition of a nitrone

To synthesize (3′R,5′S)-3′-hydroxycotinine [(+)-1], the main metabolite of nicotine (2), cycloaddition of C-(3-pyridyl)nitrones 3a, 3c, and 15 with (2R)- and (2S)-N-(acryloyl)bornane-10,2-sultam [(2R)- and (2S)-8] was examined. Among them, l-gulose-derived nitrone 15 underwent stereoselective cycloaddition with (2S)-8 to afford cycloadduct 16, which was elaborated to (+)-1.     

Photoactive building blocks for coordination complexes: Gilding 2,2′:6′,2″-terpyridine

The alkyne unit of 4′-ethynyl-2,2′:6′,2″-terpyridine has been functionalized with Ph₃PAu, (2-tolyl)₃PAu or Au(dppe)Au units to produce compounds 1-3, respectively. These derivatives have been characterized by electrospray mass spectrometry, solution ¹H and ¹³C NMR, UV-Vis and emission spectroscopies, and single crystal X-ray diffraction. In the solid state, molecules of 1 or 2 pack with separated domains of tpy and R₃PAu units; the tpy units in 2 (but not 1) exhibit face-to-face π-stacking. Compound 3 crystallizes as 2(3)^.CHCl₃, and the folded conformation of the dppe backbone results in a short (2.9470(8) Å) aurophilic interaction. Folded molecule 3 captures CHCl₃, preventing intramolecular face-to-face π-interactions between the tpy units. In CH₂Cl₂ solution, 1-3 are emissive when excited between 230 and 300 nm, but over minutes when λ_ex = 230 nm, the emission bands decay as the compounds photodegrade.     

Regioselective monobromination of (E)-1-(2′-hydroxy-4′,6′-dimethoxyphenyl)-3-aryl-2-propen-1-ones using bromodimethylsulfonium bromide and synthesis of 8-bromoflavones and 7-bromoaurones

A wide variety of monobrominated compounds 2a-l have been prepared in good yields from (E)-1-(2′-hydroxy-4′,6′-dimethoxyphenyl)-3-aryl-2-propen-1-ones (1a-l) through regioselective ring bromination using 1.5 equiv of bromodimethylsulfonium bromide (BDMS) at room temperature. Similarly, some of the 2′-hydroxychalcones can be converted directly into tribromides 3 or dibromides 4 by employing 4.0 equiv of BDMS under different reaction conditions which in turn can be transformed into 8-bromoflavones and 7-bromoaurones on treatment with 0.2 M ethanolic KOH solution. Mild reaction conditions, good yields and no chromatographic separation are some of the salient features of the present protocol.     

Reaction of 3,3′,4,4′-tetramethyl-1,1′-diphosphaferrocene with [Re2(CO)8(CH3CN)2]: Novel coordination modes of the 1,1′-diphosphaferrocene ligand

Reaction of 3,3′,4,4′-tetramethyl-1,1′-diphosphaferrocene (1) with [Re₂(CO)₈(CH₃CN)₂] afforded two trimetallic complexes in which the heterometallocene is ligated across the Re-Re bond. The structure of the complex having 1 bridging the Re₂(CO)₈ moiety through two P atoms was determined by X-ray diffraction and compared with those of analogous complexes with organic bridging bis-phosphines. The second complex obtained in this reaction presumably contains 1 acting as a (P,Fe) bridging ligand.     

Synthesis and structural characterization of novel bridged platinum(II) biscarbene complexes

Novel bridged platinum(II) biscarbene complexes are reported: 1,1′-dimethyl-3,3′-methylene-4-diimidazolin-2,2′-diylidene platinum(II) (3) and 1,1′-dimethyl-3,3′-ethylene-4-diimidazolin-2,2′-diylidene platinum(II) complexes 4 are directly accessible in high yields starting from platinum halides. The one-pot synthesis obviates the need for multi-step reactions via metal precursors or free carbenes. An X-ray crystal structure of 1,1′-dimethyl-3,3′-methylene-4-diimidazolin-2,2′-diylidene platinum(II) dibromide (3b) confirmed the structural similarity to the known corresponding palladium complexes. Since free 1,1′-di-R-3,3′-methylene-4-diimidazolin-2,2′-diylidenes are only available in low yields this synthetic route provides an easy access to the corresponding carbene complexes.