Superelectrophilic bromination of deactivated aromatic rings with tribromoisocyanuric acid—an experimental and DFT study

The reaction of deactivated arenes with tribromoisocyanuric acid (TBCA) in 98% H₂SO₄ produced bromoarenes in good yields. The acidity of the medium controls the strength of the brominating agent and the amount of polybrominated products. DFT calculations at B3LYP/6-311++G^∗∗ level showed that the protonated TBCA (a superelectrophilic species) can easily transfer Br⁺ to deactivated arenes, in order to decrease internal charge-charge repulsion.     

Thermodynamic representation of the NaCl + Na2SO4 + H2O system with electrolyte NRTL model

A comprehensive thermodynamic model based on the electrolyte NRTL (eNRTL) activity coefficient equation is developed for the NaCl + H₂O binary, the Na₂SO₄ + H₂O binary and the NaCl + Na₂SO₄ + H₂O ternary. The NRTL binary parameters for pairs H₂O-(Na⁺, Cl⁻) and H₂O-(Na⁺, SO₄²⁻), and the aqueous phase infinite dilution heat capacity parameters for ions Cl⁻ and SO₄²⁻ are regressed from fitting experimental data on mean ionic activity coefficient, heat capacity, liquid enthalpy and dissolution enthalpy for the NaCl + H₂O binary and the Na₂SO₄ + H₂O binary with electrolyte concentrations up to saturation and temperature up to 473.15 K. The Gibbs energy of formation, enthalpy of formation and heat capacity parameters for solids NaCl_(s), NaCl·2H₂O_(s), Na₂SO_4(s) and Na₂SO₄·10H₂O_(s) are obtained by fitting experimental data on solubilities of NaCl and Na₂SO₄ in water. The NRTL binary parameters for the (Na⁺, Cl⁻)-(Na⁺, SO₄²⁻) pair are regressed from fitting experimental data on dissolution enthalpies and solubilities for the NaCl + Na₂SO₄ + H₂O ternary.     

Syntheses, crystal structures and optical spectroscopy of Ln2(SO4)3·8H2O (Ln=Ho, Tm) and Pr2(SO4)3·4H2O

The lanthanide sulphate octahydrates Ln₂(SO₄)₃·8H₂O (Ln=Ho, Tm) and the respective tetrahydrate Pr₂(SO₄)₃·4H₂O were obtained by evaporation of aqueous reaction mixtures of trivalent rare earth oxides and sulphuric acid at 300 K. Ln₂(SO₄)₃·8H₂O (Ln=Ho, Tm) crystallise in space group C2/c (Z=4, a_Ho=13.4421(4) Å, b_Ho=6.6745(2) Å, c_Ho=18.1642(5) Å, β_Ho=102.006(1) Å³ and a_Tm=13.4118(14) Å, b_Tm=6.6402(6) Å, c_Tm=18.1040(16) Å, β_Tm=101.980(8) Å³), Pr₂(SO₄)₃·4H₂O adopts space group P2₁/n (a=13.051(3) Å, b=7.2047(14) Å, c=13.316(3) Å, β=92.55(3) Å³). The vibrational and optical spectra of Ho₂(SO₄)₃·8H₂O and Pr₂(SO₄)₃·4H₂O are also reported.     

Advantages of the Ns group in the reactions of N-SO2R inosines with benzylamine and with NH3

The reactivity of N¹-alkylsulfonyl- and N¹-arylsulfonyl-2′,3′,5′-tri-O-acetylinosine with benzylamine and with ¹⁵NH₃, regarding the attack on C2, has been shown to be in the order CF₃SO₂ (Tf) > 2,4-(NO₂)₂C₆H₃SO₂ (DNs) ? 4-NO₂C₆H₄SO₂ (pNs) ≈ C₆F₅SO₂ (PFBs) > 2-NO₂C₆H₄SO₂ (Ns) ? CH₃SO₂ (Ms) > 4-CH₃C₆H₄SO₂ (Ts) > 2,4,6-(CH₃)₃C₆H₂SO₂ (Mts). In spite of its intermediate reactivity, the Ns group is the most appropriate, since in this case the formation of by-products is minimised during the ring-opening and ring-closing steps of the process. Another advantage of the Ns group is thus disclosed.     

Determination of lead by hydride generation inductively coupled plasma mass spectrometry (HG-ICP-MS): On-line generation of plumbane using potassium hexacyanomanganate(III)

A hydride generation (HG) procedure has been described for determination of Pb by ICP-MS using potassium hexacyanomanganate(III), K₃Mn(CN)₆, as an additive to facilitate the generation of plumbane (PbH₄). Potassium hexacyanomanganate(III) was prepared in acidic medium as it was unstable in water. The stability of hexacyanomanganate(III) was examined in dilute solutions of HCl, HNO₃ and H₂SO₄. The solutions prepared in 1% v/v H₂SO₄ were found to be stable for over a period of 24 h. The least suitable medium was 1% v/v HNO₃. For generation of plumbane, acidic hexacyanomanganate(III) and sample solutions were mixed on-line along a 5-cm long tygon tubing (1.14 mm i.d.) and then reacted with 2% m/v sodium borohydride (NaBH₄). A concentration of 0.5% m/v K₃Mn(CN)₆ facilitated the generation of PbH₄ remarkably. In comparison to H₂SO₄, HCl provided broader working range for which optimum concentration was 1% v/v. No significant interferences were noted from transition metals and hydride forming elements, up to 0.5 μg mL⁻¹ levels, except Cu which depressed the signals severely. The depressive effects in the presence of 0.1 μg mL⁻¹ Cu were alleviated by increasing the concentration of K₃Mn(CN)₆ to 2% m/v. Under these conditions, the sensitivity was enhanced by a factor of at least 42 to 48. The detection limit (3 s) was 0.008 μg L⁻¹ for ²⁰⁸Pb isotope. Average signal-to-noise ratio (S/N) ranged between 18 and 20 for 1.0 μg mL⁻¹ Pb solution. The accuracy of the method was verified by analysis of several certified reference materials, including Nearshore seawater (CASS-4), Bone ash (SRM 1400), and Mussel tissue (SRM 2976). The procedure was also successfully applied to the determination of Pb in coastal seawater samples by ICP-MS.     

Hydrothermal synthesis and characteristics of 3-D hydrated bismuth oxalate coordination polymers with open-channel structure

Two new 3-D porous bismuth coordination polymers, (C₅NH₆)₂[Bi₂(H₂O)₂(C₂O₄)₄]·2H₂O 1 and (NH₄)[Bi(C₂O₄)₂]·3H₂O 2, have been hydrothermally synthesized and characterized by single-crystal X-ray diffraction. Compound 1 crystallizes in the monoclinic symmetry, P2₁/c space group with a=10.378(2) Å, b=17.285(3) Å, c=16.563(5) Å, α=90°, β=119.66(2)°, γ=90°, V=2581.8(10) Å³, Z=4, R₁=0.0355 and wR₂=0.0658 for unique 4713 reflections I >2σ(I). Compound 2 crystallizes in the tetragonal symmetry, I4₁/amd space group with a=11.7026(17) Å, b=11.7026(17) Å, c=9.2233(18) Å, α=90°, β=90°, γ=90°, V=1263.1(4) Å³, Z=32, R₁=0.0208 and wR₂=0.0518 for unique 359 reflections I> 2σ(I). Compounds 1 and 2 are 3-D open-framework structures with a 6⁶ uniform net, which consist of honeycomb-like layers connected to each other by oxalate units. While different guest molecules fill in their cavities of honeycomb-like layers, study of ultrasonic treatment on 2 indicates the replacement of NH₄⁺ by K⁺ on potassium ion exchange. Thermogravimetric analysis indicates that the open-channel frameworks are thermally stable up to 200 °C, and other characterizations are also described by elemental analysis, IR and ultraviolet-visible diffuse reflectionintegral spectrum (UV-Vis DRIS).     

Kinetics of methoxy-NNO-Azoxymethane hydrolysis in strong acids

The kinetics of methoxy-NNO-azoxymethane (I) hydrolysis in concentrated solutions of strong acids (HBr, HCl, HClO₄, and H₂SO₄) has been investigated by a manometric method. The gas evolution rate is described by the equation corresponding to two consecutive first-order reactions, with the rate constant of the second reaction considerably exceeding the rate constant of the first reaction, i.e., k ₂ {ie17-1} k ₁. The temperature dependences of k ₁ (s⁻¹) in 47.59% HBr in the temperature range from 60 to 90°C and in 64.16% H₂SO₄ between 80 and 130°C are described by Arrhenius equations with IogA= 12.7 ± 1.5 and 13.6 ± 1.4 and E _a = 115 ± 10 and 137 ± 10 kJ/mol, respectively. The parameters of the Arrhenius equation for the rate constant k ₂ for the reaction in 64.16% H₂SO₄ between 80 and 130°C are IogA= 9.1 ± 2.5 and E _a = 91 ± 18 kJ/mol. An analysis of the UV spectra of compound I in concentrated H₂SO₄ shows that I is a weak base $ (pK_{BH^ + } \approx - 6) $ (pK_{BH^ + } \approx - 6) . The rate-determining step of the hydrolysis of I is the attack of the nucleophile on the carbon atom of the MeO group of the protonated molecule of I. The resulting methyldiazene dioxide decomposes via a complicated mechanism to evolve N₂, NO, and N₂O. The pseudo-first-order rate constant k ₁ of the reaction at 80°C depends strongly on the acid concentration and on the type of nucleophile (Br⁻, Cl⁻, or H₂O). The relationship between k ₁ and the rate constant k of the bimolecular nucleophilic substitution reaction (S_N2) is given by the linear equation log$ [k_1 /(C_H + C_{Nu} )] = m^ \ne m*X_0 + \log (k/K_{BH^ + } ) $ [k_1 /(C_H + C_{Nu} )] = m^ \ne m*X_0 + \log (k/K_{BH^ + } ) , where $ C_{H^ + } $ C_{H^ + } and C _Nu are the concentrations of H+ and nucleophile, respectively; X ₀ is the excess acidity; and m ^≠ and m* are coefficients. The Swain-Scott equation log$ (k_{Nu} /k_{H_2 O} ) = ns $ (k_{Nu} /k_{H_2 O} ) = ns , where n is the nucleophilicity factor and s is the substrate constant (s = 0.72), is applicable to the rate constants k of the S_N2 reactions of the protonated molecule of I with Br⁻, Cl⁻, and H₂O.     

Synthesis,structural characterisation and thermal decomposition of a new organic–inorganic hybrid material (C5H14N2)[Cu(SO4)2(H2O)4] · H2O

The crystal structure of copper sulfate templated by 2-methylpiperazine, (C₅H₁₄N₂)[Cu(SO₄)₂(H₂O)₄] · H₂O, was investigated using single crystal X-ray diffraction data. At room temperature, it crystallises in the monoclinic P2₁/n space group with the following unit-cell parameters: a = 6.9153(1), b = 23.1295(3), c = 10.4472(1) Å, β = 104.227(1)°, V = 1619.75(4) Å³ and Z = 4. The Cu^II cation adopts a slightly distorted octahedral geometry, arising from four water molecules and two sulfate tetrahedra leading to the formation of [Cu(SO₄)₂(H₂O)₄] units. The structure consists of isolated [Cu(SO₄)₂(H₂O)₄]²⁻ anions, 2-methylpiperazinediium cations (C₅H₁₄N₂)²⁺ and water molecules connected by a three-dimensional hydrogen-bond network. The thermal decomposition of the precursor, studied by thermogravimetry and temperature-dependent X-ray powder diffraction, proceeds through four stages giving rise to the copper oxide.     

Building three-dimensional metal phosphites from the corner-shared four-membered rings chain

Three new compounds, a one-dimensional (1D) zinc phosphite, (C₄H₈N₂H₄)[Zn(HPO₃)₂] (I), two three-dimensional (3D) metal phosphites (C₄H₈N₂H₄)[Zn₃(HPO₃)₄] (II) and (C₄H₈N₂H₄)[Zn_(3−x)Co_x(HPO₃)₄(H₂O)₂] (x≈0.83) (III) have been synthesized under hydrothermal conditions templated by piperazine and characterized by single-crystal X-ray diffraction, XRD, IR, UV-vis spectra and SQUID magnetometer. Compound I displays 1D chain-like structure, containing corner-shared (cs) four-membered rings. Interestingly, the structures of II and III show 1D chains similar to those observed in I. It is noteworthy that III represents the first cobalt-substituted zinc-phosphite. Crystal data: I, monoclinic, C2/c, a=17.748(2) Å, b=7.428(9) Å, c=8.8071(11) Å, β=105.345(3)°, V=1091.9 Å³, Z=4. II, Monoclinic P2₁/c, a=9.9435(4) Å, b=10.1438(3) Å, c=17.8164(5) Å, β=95.665(2)°, V=1788.27 Å³, Z=4, and III, Monoclinic P2₁/c, a=7.2338(2) Å, b=15.0238(5) Å, c=9.2153(3) Å, β=107.741(2)°, V=953.88(5) Å³, Z=2.     

Solid substrate-room temperature phosphorimetry for the determination of residual clenbuterol hydrochloride based on the catalysis of sodium periodate oxidizing eosine Y

Clenbuterol hydrochloride (CLB) could catalyze NaIO₄ oxidation of eosine Y (R), which caused the room temperature phosphorescence (RTP) signal of R to quench sharply. The ΔI_P (=I_P2 − I_P1, I_P2 was RTP intensities of reagent blank and I_P1 was RTP intensities of test solution) of the system was directly proportional to the content of CLB. According to that academic thought, a new solid substrate-room temperature phosphorimetry (SS-RTP) for the determination of trace CLB has been established. This method has high sensitivity (detection limit (LD): 0.021 zg spot⁻¹, corresponding concentration: 5.2 × 10⁻²⁰ g mL⁻¹) and good selectivity (Er = ±5%, interfering species were of no interference). It has been applied to the determination of residual CLB in the practical samples. The results were verified using HPLC and GC/MS methods. The reaction mechanism of catalytic SS-RTP for the determination of residual CLB was also discussed.     

Solid–liquid metastable equilibria in the quaternary system Li2SO4 + MgSO4 + Na2SO4 + H2O at T = 263.15 K

Solubility in the liquid–solid metastable system Li₂SO₄ + MgSO₄ + Na₂SO₄ + H₂O at T = 263.15 K was studied using the isothermal evaporation method. Based on experimental data, dry-salt phase and water-phase diagrams of the system were plotted. The dry-salt phase diagram of the system includes one three-salt co-saturation point, three metastable solubility isotherm curves, and three crystallization regions corresponding to lithium sulphate monohydrate (Li₂SO₄·H₂O), epsomite (MgSO₄·7H₂O), and mirabilite (Na₂SO₄·10H₂O). Neither a solid solution nor double salts were found. Based on the extended Harvie–Weare (HW) model and its temperature-dependent equation, the values of the Pitzer parameters β⁽⁰⁾, β⁽¹⁾, β⁽²⁾, and C^Φ for Li₂SO₄, MgSO₄, and Na₂SO₄, the mixed ion-interaction parameters θ_Li,Na, θ_Li,Mg, θ_Na,Mg, ΨLi,Na,SO₄${\Psi }_{\text{Li,Na,S}{\text{O}}_4}$, ΨLi,Mg,SO₄${\Psi }_{\text{Li,Mg,S}{\text{O}}_4}$, and ΨNa,Mg,SO₄${\Psi }_{\text{Na,Mg,S}{\text{O}}_4}$, and the Debye–Hückel parameter A^Φ in the quaternary system at 263.15 K were obtained. The solubility of the quaternary system Li₂SO₄ + MgSO₄ + Na₂SO₄ + H₂O at T = 263.15 K was also calculated. A comparison between the calculated and experimental results shows that the predicted solubility agrees well with experimental data.     

New mercury(II) and silver(I) complexes containing NHC metallacrown ethers with the π-π stacking interactions

The oligoether-linked bis-benzimidazolium salt 1,1′-[1,2-ethanediylbis(oxy-1,2-ethanediyl)]bis[(3-^secbutyl)benzimidazolium-1-yl]iodide (H₂L¹ · I₂), 1,1′-[1,2-ethanediylbis(oxy-1,2-ethanediyl)]bis[(3-ethyl)benzimidazolium-1-yl]iodide (H₂L² · I₂) and 1,1′-[1,2-ethanediylbis(oxy-1,2-ethanediyl)]bis[(3-^secbutyl)benzimidazolium-1-yl]hexafluorophosphate (H₂L¹ · (PF₆)₂) and their three new mercury(II) and silver(I) complexes containing NHC metallacrown ethers, HgL¹ · (Hg₂ · I₆) (1), HgL² · I₂ (2) and AgL¹ · PF₆ (3) were prepared and characterized. In the packing diagrams of H₂L² · I₂, 1, 2 and 3 benzimidazole ring head-to-tail π-π stacking interactions are observed.     

A rare multi-coordinate tellurite, NH4ATe4O9·2H2O (ARb or Cs): The occurrence of TeO3, TeO4, and TeO5 Polyhedra in the same material

Two new tellurites, NH₄RbTe₄O₉·2H₂O and NH₄CsTe₄O₉·2H₂O have been synthesized and characterized. The compounds were synthesized hydrothermally, in near quantitative yields, using the alkali metal halide, TeO₂, and NH₄OH as reagents. The iso-structural materials exhibit layered, two-dimensional structural topologies consisting of TeO_x (x=3, 4, or 5) polyhedra separated by NH₄⁺, H₂O, Rb⁺ or Cs⁺ cations. Unique to these materials is the presence of TeO₃, TeO₄, and TeO₅ polyhedra. Thermogravimetric and infrared spectroscopic data are also presented. Crystal data: NH₄RbTe₄O₉·2H₂O: Monoclinic I2/a (no. 15), a=18.917(3) Å, b=6.7002(11) Å, c=21.106(5) Å, β=101.813(2)°, V=2618.5(9) Å³, Z=8; NH₄CsTe₄O₉·2H₂O: Monoclinic I2/a (no. 15), a=18.9880(12) Å, b=6.7633(4) Å, c=21.476(2) Å, β=102.3460(10)°, V=2694.2(3) Å³, Z=8.     

Influence of sterically non-hindering methyl groups on adsorption properties of two classical zinc and copper MOF types

The metal-organic frameworks (three-dimensional porous coordination polymers) [Zn₄O(Me₄BPDC)₃] × 9 DMF, 2 · 9 DMF and [Cu₂(Me₄BPDC)₂] × 9 DMF, 3 · 9 DMF are representatives of the classical Zn-IRMOF series and Cu paddle-wheel complexes with H₂Me₄BPDC = 2,2′,6,6′-tetramethyl-4,4′-biphenyldicarboxylic acid, 1. The dicarboxylate linker of 1 is a representative of the non-planar biphenyl ligand family, known as an efficient scaffold for chiral molecules. There is a 90° twist angle between the phenyl rings in 1, dictated by the methyl groups, which leads to assembly of doubly interpenetrated pcu-a (in 2) and nbo-a (in 3) nets under low temperature solvothermal conditions in dimethylformamide (DMF). Activation by degassing (to yield 2), exchange with methanol or tetrahydrofuran and subsequent evacuation at elevated temperatures (to yield 3^I) gave materials with BET surface areas of 1735 m²/g (2) and 1041 m²/g (3^I). Adsorbed quantities of H₂ were 1.26 wt% (2) and 1.02 wt% (3^I) (77 K, 1 bar), CO₂ 30.8 cm³/g (2) and 50 cm³/g (3^I) (273 K, 1 bar) and CH₄ 12.9 cm³/g (2) and 11.4 cm³/g (3^I) (273 K, 1 bar). The H₂ and CO₂ sorption values for 2 are similar to those of MOF-5 (IRMOF-1) with its almost doubled BET surface area. An increase is found concerning the adsorbed amounts of N₂, H₂, and CO₂ for 3^I compared to related doubly interpenetrated nbo-a-type MOF-601, MOF-602, MOF-603 ([Cu₂L₂] with L = 2,2′-R₂-4,4′-biphenyldicarboxylate, R = CN, Me, I, respectively).     

Dephosphorylation of paraoxon by hydroxamate ions in micellar media

The rate-surfactant concentration profiles for the reaction of the insecticide paraoxon with hydroxamate ions (R(CO)·NHO⁻, R = CH₃, R = C₆H₅, R = 2-HOC₆H₄) in aqueous solutions of cetyltrimethylammonium salts, CTAX (X⁻ = Br⁻, Cl⁻, SO₃H⁻) have been measured at pH 11.0 at 30 °C. All these profiles are typical of micelle-assisted bimolecular reactions involving interfacial ion exchanges. The salicylhydroxymic acid-CTACl combination is most reactive.     

Application of sequential injection-square wave voltammetry (SI-SWV) to study the adsorption of atrazine onto a tropical soil sample

Square wave voltammetry automated by sequential injection analysis was applied to determine the Freundlich adsorption coefficients for the adsorption of atrazine onto a clay rich soil. The detection limit in soil extracts was between 0.18 and 0.48 μmol L⁻¹, depending on the medium used to prepare the extracts (0.010 mol L⁻¹ KCl, CaCl₂ or HNO₃ and 0.0050 mol L⁻¹ H₂SO₄), all of them conditioned in 40 mmol L⁻¹ Britton-Robinson buffer at pH 2.0 in presence of 0.25 mol L⁻¹ NaNO₃. Also in soil extracts the linear dynamic range was between 1.16 and 18.5 μmol L⁻¹ (0.25-4.0 μg mL⁻¹), with a sampling frequency of 190 h⁻¹. The K_f Freundlich adsorption coefficient was 3.8 ± 0.2 μmol^1−1/n Lⁿ kg⁻¹ in medium of 0.010 mol L⁻¹ KCl or CaCl₂, but increased to 7.7 ± 0.1 and 9.0 ± 0.3 μmol^1−1/n Lⁿ kg⁻¹ in 0.010 mol L⁻¹ HNO₃ and 0.0050 mol L⁻¹ H₂SO₄, respectively. The increase of K_f was related to the decrease of pH from 6.4-6.7 in KCl and CaCl₂ to 3.7-4.0 in presence of HNO₃ or H₂SO₄, which favors protonation of atrazine, facilitating electrostatic attractions with negative charges of the clay components of the soil. The 1/n parameters were between 0.76 and 0.86, indicating that the isotherms are not linear, suggesting the occurrence of chemisorption at specific adsorption sites. No statistically significant differences were observed in comparison to the adsorption coefficients obtained by HPLC. The advantage of the proposed SI-SWV method is the great saving of reagent because it does not use organic solvent as in the case of HPLC (50% (v/v) acetonitrile in the mobile phase). Additionally the start up of SI-SWV is immediate (no column conditioning necessary) and the analysis time is only 19 s.     

Investigation on sensitized chemiluminescence systems and their mechanism for five fluoroquinolones

The novel chemiluminescence (CL) reaction systems were established for lomefloxacin (LMFX), ofloxacin(OFLX), norfloxacin (NFLX), gatifloxacin (GAFX) and enoxacin (ENX). The sensitized CL emission mechanism was investigated for the five systems by comparing the fluorescence emission with CL spectra. For LMFX-Ce(IV)-S₂O₃²⁻-H₂SO₄ and OFLX-Ce(IV)-S₂O₄²⁻-H₂SO₄ systems, the CL intensity is enhanced through intermolecular energy transfer from the excited SO₂^* to LMFX and OFLX. For NFLX-Ce(IV)-S₂O₄²⁻-HNO₃ system, the sensitized CL is based on intermolecular energy transfer from the excited SO₂^* to NFLX oxide. For Eu³⁺-GAFX-Ce(IV)-S₂O₄²⁻-HCl and Dy³⁺-ENX-Ce(IV)-S₂O₃²⁻-H₂SO₄ systems, the CL spectra are from the narrow characteristic emission at 590, 619 and 649 nm of Eu^3+* (⁵D₀ → ⁷F₁, ⁵D₀ → ⁷F₂, ⁵D₀ → ⁷F₃) and at 482 and 578 nm of Dy³⁺ (⁴F₉ → ⁶H_15/2, ⁴F₉ → ⁶H_13/2) through intermolecular energy transfer from the excited SO₂^* to GAFX and ENX, followed by intramolecular energy transfer from GAFX^* to Eu³⁺ and ENX^* to Dy³⁺. The conditions of CL emission were investigated and optimized. The proposed five enhanced CL systems have good linearity, higher sensitivity, precision and potential capability for residue analysis of studied analytes in foods and biological samples.     

Synthesis and structures of nine-coordinate K[Dy(Edta)(H2O)3] · 3.5H2O, (NH4)3 [Dy(Ttha)] · 5H2O, and eight-coordinate NH4[Dy(Cydta)(H2O)2] · 4.5H2O complexes

The title complexes, K[Dy(Edta)(H₂O)₃] · 3.5 H₂O (I) (H₄Edta = ethylenediamine-N,N,N′,N′-tetraacetic acid), (NH₄)₃[Dy(Ttha)] · 5H₂O (II) (H₆Ttha = triethylenetetramine-N, N,N′,N″,N‴,N‴-hexaacetic acid), and NH₄[Dy(Cydta)(H₂O)₂] · 4.5H₂O (III) (H₄Cydta = trans-1,2-cyclohexanediamine-N,N,N′,N′-tetraacetic acid), were prepared, and their compositions and structures were determined by elemental analyses and single-crystal X-ray diffraction techniques, respectively. In complex I, the Dy³⁺ ion is nine-coordinated by an Edta ligand and three water molecules, yielding a pseudo-monocapped square antiprismatic conformation, and the complex crystallizes in the orthorhombic crystal system with space group Fdd2. The crystal data are as follows: a = 19.751(7), b = 35.573(12), c = 12.227(4) ?, V = 8591(5) ?³, Z = 16, space group Fdd2 ρ_c = 1.877 g/cm³, μ = 3.742 mm⁻¹, F(000) = 4800, R = 0.0259, and wR = 0.0616 for 3218 observed reflections with I ≥ 2σ(I). For complex II, the Dy³⁺ ion is nine-coordinated by a Ttha ligand, yielding a pseudo-monocapped square antiprismatic conformation, and the complex crystallizes in the monoclinic crystal system with space group P2₁/c. In addition, there is a free non-coordinate carboxyl group (-CH₂COO⁻) in the [Dy(Ttha)]³⁻ complex anion. The crystal data are as follows: a = 10.353(3), b = 12.746(4), c = 23.141(7) ?, β = 91.005(5)°, V = 3053.2(15) ?³, Z = 4, space group P2₁/c ρ_c = 1.730 g/cm³, μ = 2.532 mm⁻¹, F(000) = 1620, R = 0.0332 and wR = 0.0924 for 5390 observed reflections with I ≥ 2σ(I). For complex III, the Dy³⁺ ion is eight-coordinated by a ligand Cydta and two water molecules, yielding a distorted square antiprismatic conformation, and the complex crystallizes in the triclinic system with space group P . The crystal data are as follows: a = 8.604(3), b = 10.012(4), c = 14.369(6) ?, α = 88.330(6)°, β = 75.363(6)°, γ = 88.285(6)°, space group P V = 1196.9(8) ?³, Z = 2, ρ_c = 1.776 g/cm³, μ = 3.194 mm⁻¹, F(000) = 644, R = 0.0445 and wR = 0.1041 for 3931 observed reflections with I ≥ 2σ(I). The article is published in the original.     

Hydrothermal syntheses and structures of two novel vanadium selenites, {[VO(OH)(H2O)](SeO3)}4·2H2O and (H3NCH2CH2NH3)[(VO)(SeO3)2]

Two novel vanadium selenites {[VO(OH)(H₂O)](SeO₃)}₄·2H₂O 1 and (H₃NCH₂CH₂NH₃)[(VO)(SeO₃)₂] 2 were synthesized by hydrothermal method and their crystal structures were determined by single-crystal X-ray diffraction. It is characterized by inductively coupled plasma (ICP), thermogravimetric (TG) and elemental analyses. Compound 1 crystallizes in the monoclinic system, space group C2/c, a=21.2250(11) Å, b=12.6309(6) Å, c=17.0249(10) Å, β=96.830(3)°, V=4531.8(4) Å³ and Z=8, R₁ [I>2σ(I)]=0.0344, wR₂ [I>2σ(I)]=0.119; Compound 2 crystallizes in the monoclinic system, space group P2₁/c, a=9.6389(4) Å, b=6.9922(3) Å, c=15.0324(5) Å, β=102.297(2)°, V=989.90(7) Å³ and Z=4, R₁ [I>2σ(I)]=0.0452, wR₂ [I>2σ(I)]=0.117. {[VO(OH)(H₂O)](SeO₃)}₄·2H₂O has a 1D structure constructed from the {[VO(OH)(H₂O)](SeO₃)}_∞ chains. (H₃NCH₂CH₂NH₃)[(VO)(SeO₃)₂] has a layered structure composed of alternating VO₅ and SeO₃ units with protonated ethylenediamine as interlayer guest.     

Composition dependent frequency upconversion of Er/Yb-codoped lead chloride tellurite glasses

The green and red upconversion luminescence of Er³⁺ in lead chloride tellurite glasses excited at 980 nm is investigated. Three intense emission bands centered at 530, 545, and 658 nm corresponding to the transitions ⁴S_3/2→⁴I_15/2, ²H_11/2→⁴I_15/2 and ⁴F_9/2→⁴I_15/2, respectively, were simultaneously observed at room temperature. With increasing PbCl₂ content, the intensity of green (530 nm) emissions increase slightly, while the green (545 nm) and red (658 nm) emissions increase significantly. The results indicate that PbCl₂ has more influence on the green (545 nm) and red (658 nm) emissions than the green (530 nm) emission. The dependence of upconversion intensities on excitation power and possible upconversion mechanisms are discussed and evaluated.