Tri- and diorganostannates containing 2-(N,N-dimethylaminomethyl)phenyl ligand

The C,N-chelated tri and diorganotin(IV) chlorides react with both protic mineral acids and carboxylic acids. The nitrogen atom of the L^CN ligand (where L^CN is 2-(dimethylaminomethyl)phenyl) is thus quarternized - protonated and new Sn-X bond (X = Cl, Br, I or the remainder of the starting acid used) is simultaneously formed. The set of zwitterionic tri and diorganostannates containing protonated 2-(dimethylaminomethyl)phenyl-moiety was prepared and structurally characterized by multinuclear NMR spectroscopy and XRD techniques. In all these cases, the intramolecular N-H?X bond is present in the molecule. Despite the central tin atom remains five-coordinated (except for the [HL^CNH]⁺[(n-Bu)₂SnCl(NO₃)₂]⁻) and reveals a distorted trigonal bipyramidal geometry, the ¹¹⁹Sn NMR chemical shift values of these zwitterionic stannates are somewhat shifted to the higher field than corresponding starting C,N-chelated tri and diorganotin(IV) halides. Reactions of C,N-chelated organotin(IV) halides with various Lewis acids are also discussed.     

Copper(I) tert-butoxide-promoted coupling of o-(1-hydroxyalkyl)arylsilanes with organic halides

Copper(I) tert-butoxide-promoted coupling of arylsilanes possessing a 1-hydroxyalkyl group at the o-position with organic halides proceeded to give disubstituted arenes. The results indicate that an intermediary arylcopper species is formed by aromatic C^sp2-to-O silyl migration.     

Pd2dba3/P(i-BuNCH2CH2)3N: a highly efficient catalyst for the one-pot synthesis of trans-4-N,N-diarylaminostilbenes and N,N-diarylaminostyrenes

A Pd₂dba₃/P(i-BuNCH₂CH₂)₃N catalyzed one-pot synthesis of unsymmetrically substituted trans-4-N,N-diarylaminostilbenes and both symmetrically and unsymmetrically substituted N,N-diarylaminostyrene derivatives is reported. The procedure involves two or more palladium catalyzed sequential coupling reactions (an amination and an inter-molecular Heck reaction) in one-pot using the same catalyst system with two different aryl halides, including aryl chlorides and hetero aryl halides as the coupling partners.     

Ring-opening reaction of methylenecyclopropanes with LiCl, LiBr or NaI in acetic acid

The methylenecyclopropanes 1 react with LiCl, LiBr or NaI at 80 °C to give the corresponding gem-disubstituted homoallylic halides 2 in good to excellent yields in acetic acid. In some cases, the ring-opening reaction can be completed within 5 min to give the corresponding gem-disubstituted homoallylic halides in high yields.     

Structure of N,C,N-chelated organotin(IV) fluorides

The set of starting tri-, di- and monoorganotin(IV) halides containing N,C,N-chelating ligand (L^NCN = {1,3-[(CH₃)₂NCH₂]₂C₆H₃}⁻) has been prepared (1-5) and two compounds structurally characterized ([L^NCNPh₂Sn]⁺I₃⁻ (1c), L^NCNSnBr₃ (5)) in the solid state. These compounds were reacted with KF with 18-crown-6, NH₄F or L^CNnBu₂SnF to give derivatives containing fluorine atom(s). Triorganotin(IV) fluorides L^NCNMe₂SnF (2a) and L^NCNnBu₂SnF (3a) revealed monomeric structural arrangement with covalent Sn-F bond both in the coordinating and non-coordinating solvents, except the behaviour of 3a that was ionized in the methanol solution at low temperature. The products of fluorination of L^NCNSnPhCl₂ (4) and 5 were described by NMR in solution as the ionic hypervalent fluorostannates or the oligomeric species reacting with chloroform, methanol or moisture to zwitterionic monomeric stannate L^NCN(H)⁺SnF₄⁻ (5c), which was confirmed by XRD analysis in the solid state.     

Copper powder-catalyzed N-arylation of imidazoles in water using 2-(hydrazinecarbonyl)pyridine N-oxides as the new ligands

2-(2-Hydrazinecarbonyl)pyridine N-oxides, which were derived from pyrrole-2-carbohydrazides and pyridine N-oxides, were synthesized and utilized as the ligands for copper powder-catalyzed N-arylation of imidazoles with aryl halides in water. Imidazoles could be arylated smoothly with various aryl halides to provide the title products in preferable yields without the need of an inert atmosphere.     

New strategy for the synthesis of N-aryl pyrroles: Cu-catalyzed C-N cross-coupling reaction of trans-4-hydroxy-l-proline with aryl halides

trans-4-Hydroxy-l-proline is used for the first time as an effective nucleophilic coupling partner with aryl halides mediated by copper iodide with Cs₂CO₃ as the base and DMSO as the solvent. Utilizing this protocol cross-coupling of trans-4-hydroxy-l-proline with a wide variety of substituted aryl halides to produce N-aryl pyrroles in moderate to good yields.     

Synthesis, characterization and thermal properties of small R2R2NX-type quaternary ammonium halides

Twenty-one R₂R^′₂N⁺X⁻ -type (R=methyl or ethyl, R^′=alkyl, X=Br or I) quaternary ammonium (QA) halides have been prepared by using a novel one-pot synthetic route in which a formamide (dimethyl-, diethylformamide, etc.) is treated with alkyl halide in the presence of sodium or potassium carbonate. The formation of QA halides was verified with ¹H-NMR, ¹³C-NMR, MS and elemental analysis. The crystal structures of four QA halides (two bromide and two iodide) were determined using X-ray single crystal diffraction, and the powder diffraction method was used to study the structural similarities between the single crystal and microcrystalline bulk material. The thermal properties of all compounds were studied using TG/DTA and DSC methods. The smallest compounds decomposed during or before melting. The decreasing trend of melting points was observed when the alkyl chain length was increased. The liquid ranges of 120-180 °C were observed for compounds with 5-6 carbon atoms in the alkyl chain. The low melting points and wide liquid ranges suggest potential applicability of these compounds for example as ionic liquids precursors.     

Approach to highly functionalized oxazolones by a Pd-catalyzed cyclization of N-alkynyl tert-butyloxycarbamates

A mild and operationally simple approach to highly functionalized oxazolones has been developed, which involves an intramolecular oxypalladation of N-alkynyl tert-butyloxycarbamates, followed by either protonolysis of the alkenyl C-Pd bond to afford 3,5-disubstituted oxazolones or allylation with allyl halides in the presence of Ag₂CO₃ to generate 3,4,5-trisubstituted oxazolones, respectively.     

DBU-promoted alkylation of alkyl phosphinates and H-phosphonates

The alkylation of alkyl phosphinates and some H-phosphonate diesters is promoted by the base DBU. Only more reactive alkyl halides react in preparatively useful yields. However, the method provides easy access to important H-phosphinate building blocks, without the need for a protecting group strategy or metal catalysts. The reaction is conveniently conducted at, or below, room temperature. The preparation of methyl-H-phosphinate esters is particularly interesting as it avoids the heretofore more common use of methyldichlorophosphine MePCl₂.     

Dimethyl selenide complexes of copper,gallium and indium halides as potential precursors for selenium-containing chalcopyrite semiconducting materials

The coordination chemistry of copper, gallium and indium halides with the simplest possible selenoether i.e. Me₂Se was investigated with the aim to use the resulting complexes as precursors for selenium-containing chalcopyrite semiconducting materials. An optimized general procedure for the high yield synthesis is described and the influence of a halide ion on the structure and solubility of these metal halide dimethyl selenide complexes are discussed. These complexes were characterized by the elemental analysis, FT-IR and ¹H NMR spectroscopy as well as single crystal X-ray structures, the later study showing them to be monomeric for gallium halides, mono- or dimeric for indium halides and either an ion-pairs or 2-D extended structure in the case of copper halides.     

Synthesis of 6,7-dihydro-5H-dibenzo[c,e]azepines and biaryls by palladium-catalyzed Ullmann reaction

A novel palladium-catalyzed Ullmann protocol is described for the synthesis of 6,7-dihydro-5H-dibenzo[c,e]azepines and biaryls. In the presence of Pd(OAc)₂ and KOAc, intramolecular or intermolecular Ullmann coupling of aryl halides proceeds efficiently under ligand-free and aerobic conditions to afford the corresponding 6,7-dihydro-5H-dibenzo[c,e]azepines and biaryls in moderate to excellent yields.     

Bi(III) halides as efficient catalysts for the O-acylative cleavage of tetrahydrofurans: an expeditious entry to tetralins

The mild (DCM/20 °C), quantitative, regioselective, O-acylative cleavage of tetrahydrofurans using organic acid halides with catalytic Bi(III) halides is reported. X-ray crystallography is used to rationalise the failure of the reaction in the case of certain crowded acid chlorides, and a useful aspect of chemoselectivity is revealed. The synthetic potential of this reaction is illustrated with a highly efficient O-acylative cleavage/intramolecular alkylation approach to tetralins.     

Palladium-catalyzed C–S bond formation by using N-amido imidazolium salts as ligands

N-Amido imidazolium salt was employed as a ligand in the palladium-catalyzed cross-coupling reaction of aryl halides and thiols, and showed good activity in the formation of thioether. The best combination for the coupling with aryl bromides was N-amido imidazolium salt 2 and NaHMDS, and that for the coupling with aryl iodides was N-amido imidazolium salt 1 and KO^tBu. The coupling reactions were conducted in the presence of Pd(OAc)₂ (1 mol %) in DMSO at 80 °C for 12 h.     

New findings in the alkylation and N-deprotection of (4S)-4-methyl-2-benzyl-2,4-dihydro-1H-pyrazino[2,1-b]quinazoline-3,6-diones

Alkyl halides behave differently to benzyl halides in C-1 alkylation of the title compounds. The syn and anti 1,4-disubstituted diastereomers thus obtained show different regioselectivity by further alkylation leading to the 1,4,4- and 1,1,4-trisubstituted compounds, respectively. Alkylation is always directed anti with respect to the bulkier substituent at C-1 or C-4. Debenzylation attempts on 2-benzyl-derivatives 1b by treatment with HCOOH and C/Pd or H₂/C–Pd/MeOH/H⁺ led to C-1 oxidised or 7,8,9,10-tetrahydro-derivatives. Deprotection of 2-p-methoxybenzyl- and 2-(2,4-dimethoxybenzyl)-derivatives with CAN and with TFA/anisole, respectively, was successful, but in the latter case epimerization at C-1 occurred.     

Synthesis of N-alkyl-N′-aryl-piperazines via copper-catalyzed C–N bond formation

An efficient copper-catalyzed tandem synthesis of N-alkyl-N′-aryl-piperazines from 1,4-diaza-bicyclo[2.2.2]octane, alkyl halides, and aryl halides in the presence of copper(I) iodide and potassium tert-butoxide in DMSO is described.     

Sonogashira reactions catalyzed by a new and efficient copper(I) catalyst incorporating N-benzyl DABCO chloride

A new and effective catalytic system using [N-benzyl DABCO]⁺[Cu₄Cl₅]⁻ was developed for the palladium-free Sonogashira cross-coupling reactions of phenylacetylene with a variety of aryl halides. In this homogeneous catalytic system, 1-benzyl-4-aza-1-azoniabicyclo[2.2.2]octane chloride, a quaternary ammonium salt containing a coordinating center, plays an important role and increases the efficiency of Cu(I) species during the reaction. A number of internal alkynes were produced in moderate to excellent yields, in short reaction times in DMF at 135 °C.     

Reaction of Halothane with sec-butyllithium in the presence of zinc halides—one-pot preparation of chlorodifluorovinylzinc reagent and its derivatization to α-chloro-β,β-difluorostyrene

Halothane, 2-bromo-2-chloro-1,1,1-trifluoroethane, reacts with sec-butyllithium in the presence of zinc halides to afford a chlorodifluorovinylzinc reagent. This zinc reagent reacts with aryl halides in the presence of a palladium catalyst to give chlorodifluorostyrene derivatives in moderate to good yields.     

Effects of Cl/Br substitution of antimony octahedra on photoluminescence and a new engineering strategy for performance optimization

Organic-inorganic metal halides have garnered extensive attention due to their versatile structures as well as fascinating optical properties, among which especially antimony halides are the focus of recent research. Herein, we design a series of novel zero-dimensional (0D) antimony halides of (C₁₃H₁₄N₃)₃SbCl_6–xBr_x (x = 0, 3, 6) with bright and tunable broadband emissions from yellow (576 nm) to orange (600 nm), which are attributed to the triplet self-trapped excitons (STEs) of the six-coordinated [SbX₆]^3– (X = Cl^? or Br^?) units. The role of halogens on their specific ³P₁→¹S₀ transition is determined, wherein Cl/Br transmutation reveals a common law modulating photoluminescence behaviors. Furthermore, a new two-step compound technology is innovatively developed for performance optimization, enabling by incorporating the pristine antimony halides into polymethyl methacrylate (PMMA) with high transparency and strong moisture resistance. The composites (C₁₃H₁₄N₃)₃SbCl_6–xBr_x/PMMA (x = 0, 3, 6) were fabricated through a demanding technology that significantly improve the processability and water stability of antimony halides while maintaining high photoluminescence quantum yields. This work not only proposes a method for halogen substitutions to tune emission, but also opens up a feasible research avenue for performance optimization in the multifunctional luminescence materials.     

Correlation between the covalency and the thallium-205 nuclear magnetic resonance chemical shift in oxides and halides

²⁰⁵Tl chemical shift measurements were carried out on thallium(I) oxides and halides. A correlation between the chemical shift and the stereochemical activity of the 6s² lone pair of Tl^I was established; the greater this activity, the greater the absolute value of the chemical shift. For the halides, optical and chemical shift measurements gave access to the Tl-X bond ionicity via Ramsey's equation. In thallium(I) halides the absolute value of the chemical shift increases with the covalency. The work of Glaser on thallium(III) halides showed the chemical shift to decrease with increasing covalency. An explication of this difference is proposed. The hyperfine coupling constant A of the paramagnetic compound Tl₄MnI₆ was determined by the study of the chemical shift as a function of the susceptibility. This constant A is seen to be weak (−7 KG/μ_B).