Synthesis of aryliminoacetonitriles under FVT conditions or by dehydrogenation of arylaminoacetonitriles: an NMR and UV-photoelectron spectroscopy study

The synthesis of [(E)-arylimino]-acetonitriles 3 has been described. It was found that the title compounds can be obtained on the three ways, namely by: (i) dehydrogenation of arylaminoacetonitriles 1, (ii) thermal fragmentation of 1-aryl-4-cyano-β-lactams 4 and (iii) retro-ene reaction of (allyl-p-methoxyphenyl-amino)-acetonitrile (7a) under FVT conditions. ¹H and ¹³C NMR spectra of compounds 3, 5 and 6, and all their precursors 1 and 4, were recorded and analysed in detail using chemical shifts δ_H and δ_C [from GIAO DFT B3LYP/6-31(d) calculations] and J-couplings predicted at the DFT B3LYP/IGLO-II level. Also, UV-photoelectron spectra of 4a,d and 3a,d were measured and analysed considering the theoretical evaluation of their ionisation potentials.     

Three-component conformational equilibria of some flexible pyrrolidin-2-(thi)ones in solution by NMR data (δC, δH, and JHH) and their DFT predictions: a confrontation of different approaches

Three standard gas-phase B3LYP/6-31G(d) methods of the analysis of δ_C, δ_H, and J_HH NMR data for solutions initially used for the title γ-lactams 1a-c led to conflicting findings on fractional populations ηs of their fast interconverting conformers A-C, which were also inconsistent with energy data. In order to find the source(s) of these discrepancies, several additional DFT computations were carried out at the double- and triple-zeta theory level with simultaneous modeling of the solutions in explicit solvents with the COSMO or IEF-PCM technique. The WC04/WP04 functionals and IGLO-II (or IGLO-III) basis set were applied for predicting δ_C/δ_H, and J_HH data, respectively. The limits of efficiency and accuracy of a few current NMR-oriented computational protocols were determined by their specific use to the main forms of 1a-c treated as test cases. Thus, an unreliability of the modified Karplus-type equation for this purpose was shown. In turn, only the use of DFT-D3 corrections for the attractive van der Waals dispersion interactions (London forces) not present in conventional DFT, to Gibbs free energies (ΔG) estimated for the forms A-C of 1a-c in solution, yielded energetics and so populations (η_Gs) compatible within ±15% (only ±2%, for 1a) with the best results found by considering the ¹H NMR data. These η_Hs were found by a linear regression of GIAO-predicted δ_H sets reproducing experiment in the best way (r²>0.9996, for 1a and 1b, r²=0.9970, for 1c with strongly degenerated δ_Hs). As for η_Js, they permitted only for evaluations of the ratios (A+B)/C, excepting sufficiently differentiated J_HHs (1b in acetone). In contrast, an application of δ_Cs for assessing η_Cs was unsuccessful. Selected findings were finally compared with the DP4-probability results (η_DP4s) and fairly good agreement was found. The greatest divergence in ηs exists for the CS bond-containing object 1b, what suggests a large effect of the intramolecular London forces on its structure and properties. The present results should be useful guidelines for NMR studies on the other multi-conformer systems in rapid equilibrium between more than two energetically feasible forms.     

Assignment of the relative and absolute configurations of acyclic secondary 1,2-diols

The NMR profiles (¹³C-δ, ¹H-δ, ¹H(OH)-δ, and ³J_H,H) of syn- and anti-diols—3a,b in achiral solvents were found to be very similar to each other. Contrarily, their Δδ (Δδ=δ_(R,R)-2−δ_(S,S)-2) behaviors in chiral bidentate NMR solvent (R,R)- and (S,S)-BMBA-p-Me (2) were found to be significantly different. On the basis of this NMR characteristic, a method has been developed to predict both the relative and absolute configurations of acyclic secondary 1,2-diols.     

Synthesis of aluminum alkoxide and bis-alkoxide compounds containing bidentate pyrrolyl ligands

A series of aluminum alkoxide and bis-alkoxides compounds were synthesized and characterized. Reacting 1 with 1 and 2 equiv. of t-butanol in methylene chloride generates [C₄H₃N(CH₂NMe₂)-2]₂Al(O-t-Bu) (2) and [C₄H₃N(CH₂NMe₂)-2-H-C₄H₃N(CH₂NMe₂)-2]Al(O-t-Bu)₂ (3) in 47% and 54% yield, respectively. The ¹H NMR spectrum of 2 exhibits two singlets for NMe₂ and CH₂N at δ 2.52 and 3.84, respectively, representing the symmetrical manner of molecular structure 2 in a solution. Compound 3 is not thermal stable in solution which decompose into substituted pyrrole ligand C₄H₄N(CH₂NMe₂)-2 and unknown aluminum alkoxides. Reacting 1 with 2 equiv. of triphenylsilanol in methylene chloride generates a tetra-coordinated aluminum “ate” compound [C₄H₃N(CH₂NMe₂)-2-H- C₄H₃N(CH₂NMe₂)-2]Al(OSiPh₃)₂ (4) in 49% yield. The ¹H NMR spectra of 4 at room temperature show a broad signal at δ 1.57 for NMe₂ fragments and the signals for CH₂N were not observed. VT ¹H NMR spectra of 4 show the NMe₂ fragments became two singlets (δ 1.27 and 2.12) and the CH₂N exhibited two doublets (δ 2.44 and 3.56) at 240 K. The fluxional energy barrier (ΔG^‡) is estimated at ca. 50 kJ/mol. The molecular structures of compounds 3 and 4 are determined by single-crystal X-ray diffractometer.     

Synthesis and structural characterisation of redox-responsive N-ferrocenoyl amino acid esters; the X-ray crystal structure of N-ferrocenoyl alanine methyl ester; electrochemical anion recognition and H NMR complexation studies

The N-ferrocenoyl amino acid ester derivatives FcCOR {Fc=(η⁵-C₅H₅)Fe(η⁵-C₅H₄)} where R=Gly(OMe) 1, Gly(OEt) 2, Gly(OBn) 3, l-Ala(OMe) 4, l-Ala(OEt) 5, l-Leu(OMe) 6, l-Leu(OEt) 7, l-Leu(OBn) 8, l-Phe(OMe) 9 and l-Phe(OEt) 10, were prepared by coupling ferrocene carboxylic acid with the appropriate amino acid ester starting materials using the 1,3-dicyclohexylcarbodiimide (DCC), 1-hydroxybenzotriazole (HOBt) protocol and these have been characterised by spectroscopic techniques. The electrochemical anion sensing behaviour of compounds 1-10 with several anions using a platinum microdisk working electrode is described, together with ¹H NMR anion complexation studies. The X-ray single crystal structure of N-ferrocenoyl-l-alanine methyl ester 4 has been determined and contains two molecules which differ slightly in conformation in the asymmetric unit of space group P2₁ (No. 4); principal dimensions are amide N(H)CO 1.224(6) and 1.231(6) Å, ester CO 1.220(10) and 1.190(7) Å, with N-H?OC(amide) as the primary intermolecular hydrogen bond, N?O 2.992(6) and 2.971(6) Å and with graph set C(4).     

Synthesis, characterization and structural studies of diorganotin(IV) complexes with Schiff base ligand salicylaldehyde isonicotinylhydrazone

Eight diorganotin(IV) complexes of salicylaldehyde isonicotinylhydrazone (H₂SalN) R₂Sn(SalN) R = t-Bu 1, Ph 2, PhCH₂3, o-ClC₆H₄CH₂4, p-ClC₆H₄CH₂5,m-ClC₆H₄CH₂6,o-FPhCH₂7, p-FC₆H₄CH₂8 were prepared. All complexes 1-8 have been characterized by elemental, IR, ¹H, ¹³C and ¹¹⁹Sn NMR analyses. The crystal structures of H₂SalN and complex 1 were determined by X-ray crystallography diffraction analyses. Studies show that H₂SalN is a tridentate planar ligand. For complex 1, the tin atom lies in this plane and forms a five- and six-membered chelate ring with the tridentate ligand. A comparison of the IR spectra of the ligand with those of the corresponding complexes, reveals that the disappearance of the bands assigned to carbonyl unambiguously confirms that the ligand coordinate with the tin in the enol form.     

Synthesis, characterization, and applications in Heck and Suzuki coupling reactions of amphiphilic cyclopalladated ferrocenylimines

A series of novel amphiphilic ferrocenylimines and their cyclopalladated complexes of general formula [Fe(η⁵-C₅H₅)(η⁵-C₅H₄CR₁NR₂)] (R₁=H, R₂=C₁₂H₂₅-n4a, R₁=H, R₂=C₁₆H₃₃-n4b, R₁=CH₃, R₂=C₁₂H₂₅-n4c, R₁=CH₃, R₂=C₁₆H₃₃-n4d), [PdCl{[(η⁵-C₅H₅)]Fe[(η⁵-C₅H₃)CR₁NR₂]}]₂ (5a-d), [PdCl{[(η⁵-C₅H₅)]Fe[(η⁵-C₅H₃)-CR₁NR₂]}(PPh₃)] (6a-d), were prepared and characterized by ¹H NMR, ¹³C NMR, ³¹P NMR, IR, HRMS, and elemental analysis. The crystal structures of 5c,d were determined by X-ray crystallography. These amphiphilic cyclopalladated complexes are thermally stable and insensitive to oxygen and moisture. The redox properties of 4a-d, 5a-d, 6a-d were also investigated using cyclic voltammetric technique. Compounds 5a-d, 6a-d displayed good activity in the Heck reaction of a variety of aryl halides with ethyl acrylate or styrene and the Suzuki-Miyaura cross-coupling reaction of aryl bromides with phenylboronic acid in bulk solution. They are also suitable for formation of Langmuir-Blodgett (LB) films.     

Synthesis,crystal structures and spectroscopic studies of calcium(II) succinamate(-1) complexes

The reaction of succinamic acid (H₂sucm) with Ca(NO₃)₂·4H₂O yielded compounds [Ca(Hsucm)(NO₃)(H₂O)]_n (1) and [Ca(Hsucm)₂]_n (2). The succinamate(-1) ligand presents two new ligation modes and coordinates through the two carboxylato and the amide O-atoms, thus bridging three Ca^II ions which assemble into zig-zag 1D chains in 1 and 2D networks in 2. Intermolecular hydrogen bonding interactions in the crystal structures of 1 and 2 result in overall 3D framework structures. Both compounds have been characterized by IR and ¹H NMR spectroscopy, and their thermal decomposition was monitored by TG/DTG and DSC measurements. The structural comparison of 1 and 2 with known lanthanide(III) succinamate(-1) complexes reveals differences in the coordination mode of the ligand and in the coordination number of the metal ions; the biological relevance of these differences is discussed.     

Diastereomeric half-sandwich Ru(II) cationic complexes containing amino amide ligands. Synthesis, solution properties, crystal structure and catalytic activity in transfer hydrogenation of acetophenone

The cationic complexes [(η⁶-arene)Ru(N,O-amino amide)X]Y (arene = p-cymene or indane; N,O-amino amide = (l)-proline amide or (l)-phenylalanine amide; X = Cl or I; Y = Cl, I or PF₆) have been synthesised and fully characterized by spectroscopic and analytical methods. In several cases (1a, 3a, 4a, 4b, 5) the metal configuration has been definitively established by X-ray analysis on single crystal. The lability of the metal center in solution has been studied by ¹H NMR and CD techniques. The highest configurational stability has been found in the complexes of the type [(η⁶-indane)Ru(N,O-proline amide)Cl]Y (4a,b). The complexes 1b, 2a-b, 3b, 4b and 5 are good precatalysts for the transfer hydrogenation of acetophenone in basic i-PrOH, with ee up to 76% at 30 °C. An ESI(+)-MS study of pre-catalytic solutions has provided useful information on the catalytic mechanism.     

Synthesis, X-ray structures, and syndiospecific polymerization behavior of styrene of new (pentamethylcyclopentadientyl) titanatranes containing modified tetradentate triethanolamine ligands

A series of monomeric pentamethylcyclopentadienyltitanatranes, [n = 0, 1; n = 1, 2; n = 2, 3], were synthesized by the reaction of Cp∗TiCl₃ with corresponding triethanolamines such as (HOCH₂CH₂)_nN(CH₂CMe₂OH)_{3 − n} (n = 0, L1H₃; n = 1, L2H₃; n = 2, L3H₃), which varied by the number of CMe₂ groups adjacent to an OH functionality from 3 (L1H₃) to 2 (L2H₃) to 1 (L3H₃), in the presence of NEt₃. All complexes were characterized by elemental analysis and solution ¹H and ¹³C{¹H} NMR spectroscopy. Moreover, their solid state structures, which are slightly distorted three-legged piano stool geometry, have been confirmed by single crystal X-ray diffraction analysis. On activation with methylaluminoxane (MAO), these complexes showed good catalytic activity for the polymerization of styrene producing syndiotactic polystyrene (SPS) with high molecular weights. Compounds 1 and 2 bearing more than two pairs of methyl substituents on the side arms of triethanolamines showed the enhanced catalytic activities as the polymerization temperature went up from 50 °C to 110 °C, whereas less bulky complexes 3 and Cp∗Ti(OCH₂CH₂)₃N (4) gave the decreased activities as polymerization temperature rose. Unlike 3 and 4, complexes 1 and 2 in the presence of MAO as a cocatalyst gave SPS with controlled bimodal molecular weight distribution. Bimodal properties were much distinct at low polymerization temperature.     

Synthesis, characterizations and crystal structures of di-n-butyltin(IV) complexes with heteroatomic (N, O or S) acid

Two types of di-n-butyltin(IV) complexes {[ⁿBu₂Sn(O₂CR)]₂O}₂ · L 1-4 and ⁿBu₂Sn(O₂CR)₂Y 5-8 (when L=H₂O, R=2-pyrazine 1; L=0, R=2-pyrimidylthiomethylene 2, 1-naphthoxymethylene 3; L=C₆H₆, R=2-naphthoxymethylene 4; when Y=H₂O, R=2-pyrazine 5; Y=0, R=2-pyrimidylthiomethylene 6, 1-naphthoxymethylene 7, 2-naphthoxymethylene 8) have been prepared in 1:1 or 1:2 molar ratios by reactions of di-n-butyltin oxide with the heteroatomic (N, O or S) carboxylic acids. The complexes 1-8 are characterized by elemental, IR, ¹H and ¹³C NMR spectra. And except for complexes 6 and 7, the complexes 1-5 and 8 are also characterized by X-ray crystallography diffraction analyses, which reveal that the tin atom of complex 5 is seven-coordinated, while the complexes 1-4 and 8 are all hexa-coordinated. The nitrogen atom of the aromatic ring in complexes 1 and 5 participates in the interactions with the Sn atom.     

New N-pyrazole, P-phosphinite hybrid ligands and corresponding Rh(I) complexes: X-ray crystal structures of complexes with [Rh, N, P-phosphinite, Cl, (CO)] core

Two new N-pyrazole, P-phosphinite hybrid ligands 3-(3,5-dimethyl-1H-pyrazol-1-yl)propyldiphenylphosphinite (L³) and 2-(3,5-diphenyl-1H-pyrazol-1-yl)ethyldiphenylphosphinite (L⁴) are presented. The reactivity of these ligands and two other ligands reported in the literature (3,5-dimethyl-1H-pyrazol-1-yl)methyldiphenylphosphinite (L¹) and 2-(3,5-dimethyl-1H-pyrazol-1-yl)ethyldiphenylphosphinite (L²) towards [RhCl(CO)₂]₂ (1) have been studied and complexes [RhCl(CO)L] (L = L² (2), L³ (3) and L⁴ (4)) have been obtained. For L¹ only decomposition products have been achieved. All complexes were fully characterised by analytical and spectroscopic methods and the resolution of the crystalline structure of complexes 2 and 3 by single-crystal X-ray diffraction are also presented. In these complexes, the ligands are coordinated via κ²(N,P) to Rh(I), forming metallocycles of seven (2 and 4) or eight (3) members and finish its coordination with a carbonyl monoxide and a trans-chlorine to phosphorus atom. In both complexes, weak intermolecular interactions are present. NMR studies of complexes 2-4 show the chain N-(CH₂)_x-O becomes rigid and the protons diastereotopic.     

Cationic olefin Pd(II) complexes bearing α-iminoketone N,O-ligands: synthesis, intramolecular and interionic characterization and reactivity with olefins and alkynes

Complexes [Pd(η¹, η²-5-OMe-C₈H₁₂)(N,O)]BF₄ (N,O=2,6-(i-Pr)₂(C₆H₃)NC(Ph)-C(Ph)O, 1; 2,6-(i-Pr)₂(C₆H₃)NC(Me)-C(Ph)O, 2; 2-benzoylpyridine, 3) were synthesized by the reactions of [Pd(η¹,η²-5-OMe-C₈H₁₂)Cl]₂ with the suitable N,O-ligand. They were tested as catalysts for olefin or alkyne polymerizations. During such reactions 1-3 quantitatively transformed into their η¹,η²-1-OMe-C₈H₁₂ isomers (1a-3a). The same isomerization occurred in methylene chloride, even in the absence of olefins or alkynes, with a much slower rate. All complexes were fully characterized in solution by multinuclear and multidimensional low temperature NMR spectroscopy. The solid state structures of complexes 1 and 1a were investigated by X-ray single crystal studies. ¹⁹F, ¹H-HOESY NMR experiments carried out in methylene chloride-d₂ at 217 K indicated that the anion prefers to locate on the side of N,O-ligand shifted toward the O-arm in 1-1a and 2-2a while it approaches the N-arm in 3 and 3a compounds.     

Synthesis and characterization of some novel cadmium(II) complexes with 3-hydroxypicolinic acid (3-OHpicH): Crystal and molecular structures of [CdI(3-OHpic)(3-OHpicH)(H2O)]2, [Cd(3-OHpic)2(H2O)2] and [Cd(3-OHpic)2]n

Cadmium(II) complexes of 3-hydroxypicolinic acid, namely [CdI(3-OHpic)(3-OHpicH)(H₂O)]₂ (1), [Cd(3-OHpic)₂(H₂O)₂] (2) and [Cd(3-OHpic)₂]_n (3) were prepared and characterized by spectroscopic methods (IR, NMR) and their molecular and crystal structures were determined by X-ray crystal structure analysis. Complexes 1 and 2 were prepared in similar reaction conditions using different cadmium(II) salts: cadmium(II) iodide and cadmium(II) acetate dihydrate, respectively, while 3 was prepared by recrystallization of 2 from N,N-dimethylformamide solution. Various coordination modes of 3-OHpicH in 1–3 were established in the solid state: bidentate N,O-chelated mode in 1 and 2, monodentate mode through the carboxylate O atom from zwitterionic ligand in 1 and bidentate N,O-chelated and bridging mode in 3. In the DMF solution of all prepared complexes, only monodentate mode of 3-OHpicH binding to cadmium(II) through the carboxylate O atom was established by ¹H, ¹³C, ¹⁵N and ¹¹³Cd NMR spectroscopy.     

Synthesis and properties of new Mo(II) complexes with N-heterocyclic and ferrocenyl ligands

New Mo(II) complexes with 2,2′-dipyridylamine (L1), [Mo(CH₃CN)(η³-C₃H₅)(CO)₂(L1)]OTf (C1a) and [{MoBr(η³-C₃H₅)(CO)₂(L1)}₂(4,4′-bipy)](PF₆)₂ (C1b), with {[bis(2-pyridyl)amino]carbonyl}ferrocene (L2), [MoBr(η³-C₃H₅)(CO)₂(L2)] (C2), and with the new ligand N,N-bis(ferrocenecarbonyl)-2-aminopyridine (L3), [MoBr(η³-C₃H₅)(CO)₂(L3)] (C3), were prepared and characterized by FTIR and ¹H and ¹³C NMR spectroscopy. C1a, C1b, L3, and C2 were also structurally characterized by single crystal X-ray diffraction. The Mo(II) coordination sphere in all complexes features the facial arrangement of allyl and carbonyl ligands, with the axial isomer present in C1a and C2, and the equatorial in the binuclear C1b. In both C1a and C1b complexes, the L1 ligand is bonded to Mo(II) through the nitrogen atoms and the NH group is involved in hydrogen bonds. The X-ray single crystal structure of C2 shows that L2 is coordinated in a κ²-N,N-bidentate chelating fashion. Complex C3 was characterized as [MoBr(η³-C₃H₅)(CO)₂(L3)] with L3 acting as a κ²-N,O-bidentate ligand, based on the spectroscopic data, complemented by DFT calculations.The electrochemical behavior of the monoferrocenyl and diferrocenyl ligands L2 and L3 has been studied together with that of their Mo(II) complexes C2 and C3. As much as possible, the nature of the different redox changes has been confirmed by spectrophotometric measurements. The nature of the frontier orbitals, namely the localization of the HOMO in Mo for both in C2 and C3, was determined by DFT studies.     

pH- and mol-ratio dependent formation of zinc(II) coordination polymers with iminodiacetic acid: Synthesis, spectroscopic, crystal structure and thermal studies

Three novel zinc coordination polymers (NH₄)_n[Zn(Hida)Cl₂]_n (1), [Zn(ida)(H₂O)₂]_n (2), [Zn(Hida)₂]_n·4nH₂O (3) (H₂ida=iminodiacetic acid) and a monomeric complex [Zn(ida)(phen)(H₂O)]·2H₂O (4) (phen=1,10-phenanthroline) have been synthesized and characterized by X-ray diffraction methods. 1 and 2 form one-dimensional (1-D) chain structures, whereas 3 exhibits a three-dimensional (3-D) diamondoid framework with an open channel. The mononuclear complex 4 is extended into a 3-D supramolecular architecture through hydrogen bonds and π-π stacking. Interestingly, cyclic nonplanar tetrameric water clusters are observed that encapsulated in the 3-D lattice of 4. Based on ¹H and ¹³C NMR observations, there is obvious coordination of complex 2 in solution, while 1 and 3 decompose into free iminodiacetate ligand. Monomer [Zn(ida)(H₂O)₃] (5) is considered as a possible discrete species from 2. These coordination polymers can serve as good molecular precursors for zinc oxide.     

Microwave-assisted synthesis and characterization of a new soluble metal-free and metallophthalocyanines peripherally fused to four 18-membered tetrathiadiaza macrocycles

Preparation of some novel symmetrically tetrasubstituted metal-free phthalocyanine (6) and metallophthalocyanines (7-10) containing four 18-membered tetrathiadiaza macrocycles moieties on peripheral positions has been achieved by cyclotetramerization reaction of phthalonitrile derivative (5) in a multi-step reaction sequence. Metal-free phthalocyanine (6) was synthesized by microwave irradiation of 13,24-bis[(4-methylphenyl)sulfonyl]-6,7,14,15,23,24-hexahydro-13H,22H-tribenzo[b,h,n][1,4,10,13,7,16]tetrathiadiazacyclo-octadecine-18,19-dicarbonitrile (5) in 2-(dimethylamino)ethanol. The metallophthalocyanines (7-10) were prepared by the reaction of the phthalonitrile compound (5) with NiCl₂, Zn(CH₃COO)₂, CoCl₂, CuCl₂ salts, respectively, by microwave irradiation in 2-(dimethylamino)ethanol for at 175 °C, 350 W. The new compounds were characterized by IR, ¹H NMR, ¹³C NMR, UV-Vis, elemental analysis and MS spectra data.     

Hafnium alkyl complexes of the anionic PNP pincer ligand and possible alkylidene formation

The diarylamido-based PNP pincer ligand can be used successfully for support of organometallic Hf complexes (PNP = [(4-Me-2-ⁱPr₂P-C₆H₃)₂N]). (PNP)HfCl₃ (3) was prepared via reaction of (PNP)Li (2) with HfCl₄(OEt₂). Reactions of (PNP)HfCl₃ with alkyl Grignards led to triple alkylation to produce (PNP)HfMe₃ (4) with a small methyl or only double alkylation to give (PNP)Hf(CH₂SiMe₃)₂Cl (5) with a larger alkyl. Structures of 3, 4, and 5 in the solid state were established by X-ray diffraction studies. Structures of the alkyl complexes 4 and 5 display remarkably irregular coordination environments about Hf, while in 3 it is approximately octahedral. Compound 4 was found to be thermally stable at 75 °C. On the other hand, thermolysis of 5 at similar conditions led to a mixture of products, the major one of which is believed to be a Hf alkylidene on the basis of in situ NMR spectroscopic observations (e.g., δ 248.2 ppm in the ¹³C{¹H} NMR spectrum).